circuitpython/ports/nrf/hal/hal_uart.h

/*
 * This file is part of the MicroPython project, http://micropython.org/
 *
 * The MIT License (MIT)
 *
 * Copyright (c) 2016 Glenn Ruben Bakke
 *
 * Permission is hereby granted, free of charge, to any person obtaining a copy
 * of this software and associated documentation files (the "Software"), to deal
 * in the Software without restriction, including without limitation the rights
 * to use, copy, modify, merge, publish, distribute, sublicense, and/or sell
 * copies of the Software, and to permit persons to whom the Software is
 * furnished to do so, subject to the following conditions:
 *
 * The above copyright notice and this permission notice shall be included in
 * all copies or substantial portions of the Software.
 *
 * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
 * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
 * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE
 * AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER
 * LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM,
 * OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN
 * THE SOFTWARE.
 */

#ifndef HAL_UART_H__
#define HAL_UART_H__

#include <stdint.h>
#include <stdbool.h>

#include "nrf.h"

#define UART_HWCONTROL_NONE                  ((uint32_t)UARTE_CONFIG_HWFC_Disabled << UARTE_CONFIG_HWFC_Pos)
#define UART_HWCONTROL_RTS_CTS               ((uint32_t)(UARTE_CONFIG_HWFC_Enabled << UARTE_CONFIG_HWFC_Pos)
#define IS_UART_HARDWARE_FLOW_CONTROL(CONTROL)\
                            (((CONTROL) == UART_HWCONTROL_NONE) || \
                             ((CONTROL) == UART_HWCONTROL_RTS_CTS))
#ifdef HAL_UART_MODULE_ENABLED
  #define UART_BASE_POINTERS (const uint32_t[]){NRF_UART0_BASE}
  #define UART_IRQ_VALUES (const uint32_t[]){UARTE0_UART0_IRQn}
#else // HAL_UARTE_MODULE_ENABLED
  #ifdef NRF52832_XXAA
    #define UART_BASE_POINTERS (const uint32_t[]){NRF_UARTE0_BASE}
    #define UART_IRQ_VALUES (const uint32_t[]){UARTE0_UART0_IRQn}
  #elif NRF52840_XXAA
    #define UART_BASE_POINTERS (const uint32_t[]){NRF_UARTE0_BASE, \
                                                  NRF_UARTE1_BASE}
    #define UART_IRQ_VALUES (const uint32_t[]){UARTE0_UART0_IRQn, \
                                               UARTE1_IRQn}
  #endif // HAL_UARTE_MODULE_ENABLED
#endif

#define UART_BASE(x) ((NRF_UART_Type *)UART_BASE_POINTERS[x])
#define UART_IRQ_NUM(x) (UART_IRQ_VALUES[x])

typedef enum
{
    HAL_UART_ERROR_NONE      = 0x00,    /*!< No error */
    HAL_UART_ERROR_ORE       = 0x01,    /*!< Overrun error. A start bit is received while the previous data still lies in RXD. (Previous data is lost.) */
    HAL_UART_ERROR_PE        = 0x02,    /*!< Parity error. A character with bad parity is received, if HW parity check is enabled. */
    HAL_UART_ERROR_FE        = 0x04,    /*!< Frame error. A valid stop bit is not detected on the serial data input after all bits in a character have been received. */
    HAL_UART_ERROR_BE        = 0x08,    /*!< Break error. The serial data input is '0' for longer than the length of a data frame. (The data frame length is 10 bits without parity bit, and 11 bits with parity bit.). */
} hal_uart_error_t;

typedef enum {
    HAL_UART_BAUD_1K2 = 0,        /**< 1200 baud */
    HAL_UART_BAUD_2K4,            /**< 2400 baud */
    HAL_UART_BAUD_4K8,            /**< 4800 baud */
    HAL_UART_BAUD_9K6,            /**< 9600 baud */
    HAL_UART_BAUD_14K4,           /**< 14.4 kbaud */
    HAL_UART_BAUD_19K2,           /**< 19.2 kbaud */
    HAL_UART_BAUD_28K8,           /**< 28.8 kbaud */
    HAL_UART_BAUD_38K4,           /**< 38.4 kbaud */
    HAL_UART_BAUD_57K6,           /**< 57.6 kbaud */
    HAL_UART_BAUD_76K8,           /**< 76.8 kbaud */
    HAL_UART_BAUD_115K2,          /**< 115.2 kbaud */
    HAL_UART_BAUD_230K4,          /**< 230.4 kbaud */
    HAL_UART_BAUD_250K0,          /**< 250.0 kbaud */
    HAL_UART_BAUD_500K0,          /**< 500.0 kbaud */
    HAL_UART_BAUD_1M0             /**< 1 mbaud */
} hal_uart_baudrate_t;

typedef struct {
    uint8_t           id;           /* UART instance id */
    const pin_obj_t * rx_pin;       /* RX pin. */
    const pin_obj_t * tx_pin;       /* TX pin. */
    const pin_obj_t * rts_pin;      /* RTS pin, only used if flow control is enabled. */
    const pin_obj_t * cts_pin;      /* CTS pin, only used if flow control is enabled. */
    bool              flow_control; /* Flow control setting, if flow control is used, the system will use low power UART mode, based on CTS signal. */
    bool              use_parity;   /* Even parity if TRUE, no parity if FALSE. */
    uint32_t          baud_rate;    /* Baud rate configuration. */
    uint32_t          irq_priority; /* UARTE IRQ priority. */
    uint32_t          irq_num;
} hal_uart_init_t;

typedef struct
{
    NRF_UART_Type     * p_instance; /* UART registers base address   */
    hal_uart_init_t     init;       /* UART communication parameters */
} UART_HandleTypeDef;

typedef void (*uart_complete_cb)(void);

void hal_uart_init(NRF_UART_Type * p_instance, hal_uart_init_t const * p_uart_init);
bool hal_uart_inited(NRF_UART_Type * p_instance);

hal_uart_error_t hal_uart_char_write(NRF_UART_Type * p_instance, uint8_t ch);

hal_uart_error_t hal_uart_char_read(NRF_UART_Type * p_instance, uint8_t * ch);
int hal_uart_available(NRF_UART_Type * p_instance);

#endif // HAL_UART_H__