circuitpython/ports/rp2/Makefile

# Makefile for micropython on Raspberry Pi RP2
#
# This is a simple wrapper around cmake

BOARD ?= PICO
 
BUILD ?= build-$(BOARD)

$(VERBOSE)MAKESILENT = -s

CMAKE_ARGS = -DMICROPY_BOARD=$(BOARD)

ifdef USER_C_MODULES
CMAKE_ARGS += -DUSER_C_MODULES=${USER_C_MODULES}
endif

all:
	[ -d $(BUILD) ] || cmake -S . -B $(BUILD) -DPICO_BUILD_DOCS=0 ${CMAKE_ARGS}
	$(MAKE) $(MAKESILENT) -C $(BUILD)

clean:
	$(RM) -rf $(BUILD)
rp2: Add new port to Raspberry Pi RP2 microcontroller. This commit adds a new port "rp2" which targets the new Raspberry Pi RP2040 microcontroller. The build system uses pure cmake (with a small Makefile wrapper for convenience). The USB driver is TinyUSB, and there is a machine module with most of the standard classes implemented. Some examples are provided in the examples/rp2/ directory. Work done in collaboration with Graham Sanderson. Signed-off-by: Damien George <damien@micropython.org> 2021-01-20 08:34:08 -05:00			`# Makefile for micropython on Raspberry Pi RP2`
			`#`
			`# This is a simple wrapper around cmake`

rp2: Add support for building different board configurations. This change allows to build firmware for different rp2-based boards, following how it is done in other ports like stm32 and esp32. So far only the original Pico and Adafruit Feather RP2040 are added. Board names should match (sans case) those in pico-sdk/src/boards/include/boards/. Usage: Pico firmware can be build either using make as previously (it is the default board) or by `make BOARD=PICO`. Feather is built by `make BOARD=ADAFRUIT_FEATHER_RP2040`. Only the board name and flash drive size is set, pin definition is taken from the appropriate pico-sdk board definition. Firmware is saved in the directory build-BOARD_NAME. 2021-04-05 16:57:18 -04:00			`BOARD ?= PICO`

			`BUILD ?= build-$(BOARD)`
rp2: Add new port to Raspberry Pi RP2 microcontroller. This commit adds a new port "rp2" which targets the new Raspberry Pi RP2040 microcontroller. The build system uses pure cmake (with a small Makefile wrapper for convenience). The USB driver is TinyUSB, and there is a machine module with most of the standard classes implemented. Some examples are provided in the examples/rp2/ directory. Work done in collaboration with Graham Sanderson. Signed-off-by: Damien George <damien@micropython.org> 2021-01-20 08:34:08 -05:00
			`$(VERBOSE)MAKESILENT = -s`

rp2: Add support for building different board configurations. This change allows to build firmware for different rp2-based boards, following how it is done in other ports like stm32 and esp32. So far only the original Pico and Adafruit Feather RP2040 are added. Board names should match (sans case) those in pico-sdk/src/boards/include/boards/. Usage: Pico firmware can be build either using make as previously (it is the default board) or by `make BOARD=PICO`. Feather is built by `make BOARD=ADAFRUIT_FEATHER_RP2040`. Only the board name and flash drive size is set, pin definition is taken from the appropriate pico-sdk board definition. Firmware is saved in the directory build-BOARD_NAME. 2021-04-05 16:57:18 -04:00			`CMAKE_ARGS = -DMICROPY_BOARD=$(BOARD)`
rp2: Add support for USER_C_MODULES to CMake build system. The parts that are generic are added to py/ so they can be used by other ports that use CMake. py/usermod.cmake: * Creates a usermod target to hang user C/CXX modules from. * Gathers sources from user C/CXX modules and libs for QSTR scan. ports/rp2/CMakeLists.txt: * Includes py/usermod.cmake. * Links the resulting usermod library to the MicroPython target. py/mkrules.cmake: Add cxxflags to qstr.i.last custom command for CXX modules: * MICROPY_CPP_FLAGS so CXX modules will find includes. * -DNO_QSTR to fix fatal error missing "genhdr/qstrdefs.generated.h". Usage: The rp2 port can be linked against user C modules by running: make USER_C_MODULES=/path/to/module/micropython.cmake CMake will print a list of included modules. Co-authored-by: Graham Sanderson <graham.sanderson@raspberrypi.org> Co-authored-by: Michael O'Cleirigh <michael.ocleirigh@rivulet.ca> Signed-off-by: Phil Howard <phil@pimoroni.com> 2021-02-23 17:57:14 -05:00
			`ifdef USER_C_MODULES`
			`CMAKE_ARGS += -DUSER_C_MODULES=${USER_C_MODULES}`
			`endif`

rp2: Add new port to Raspberry Pi RP2 microcontroller. This commit adds a new port "rp2" which targets the new Raspberry Pi RP2040 microcontroller. The build system uses pure cmake (with a small Makefile wrapper for convenience). The USB driver is TinyUSB, and there is a machine module with most of the standard classes implemented. Some examples are provided in the examples/rp2/ directory. Work done in collaboration with Graham Sanderson. Signed-off-by: Damien George <damien@micropython.org> 2021-01-20 08:34:08 -05:00			`all:`
rp2: Add support for USER_C_MODULES to CMake build system. The parts that are generic are added to py/ so they can be used by other ports that use CMake. py/usermod.cmake: * Creates a usermod target to hang user C/CXX modules from. * Gathers sources from user C/CXX modules and libs for QSTR scan. ports/rp2/CMakeLists.txt: * Includes py/usermod.cmake. * Links the resulting usermod library to the MicroPython target. py/mkrules.cmake: Add cxxflags to qstr.i.last custom command for CXX modules: * MICROPY_CPP_FLAGS so CXX modules will find includes. * -DNO_QSTR to fix fatal error missing "genhdr/qstrdefs.generated.h". Usage: The rp2 port can be linked against user C modules by running: make USER_C_MODULES=/path/to/module/micropython.cmake CMake will print a list of included modules. Co-authored-by: Graham Sanderson <graham.sanderson@raspberrypi.org> Co-authored-by: Michael O'Cleirigh <michael.ocleirigh@rivulet.ca> Signed-off-by: Phil Howard <phil@pimoroni.com> 2021-02-23 17:57:14 -05:00			`[ -d $(BUILD) ] \|\| cmake -S . -B $(BUILD) -DPICO_BUILD_DOCS=0 ${CMAKE_ARGS}`
rp2: Add new port to Raspberry Pi RP2 microcontroller. This commit adds a new port "rp2" which targets the new Raspberry Pi RP2040 microcontroller. The build system uses pure cmake (with a small Makefile wrapper for convenience). The USB driver is TinyUSB, and there is a machine module with most of the standard classes implemented. Some examples are provided in the examples/rp2/ directory. Work done in collaboration with Graham Sanderson. Signed-off-by: Damien George <damien@micropython.org> 2021-01-20 08:34:08 -05:00			`$(MAKE) $(MAKESILENT) -C $(BUILD)`

			`clean:`
			`$(RM) -rf $(BUILD)`