circuitpython/ports/esp32s2/common-hal/microcontroller/Pin.c

140 lines
4.2 KiB
C
Raw Normal View History

/*
* This file is part of the MicroPython project, http://micropython.org/
*
* The MIT License (MIT)
*
* Copyright (c) 2016 Scott Shawcroft for Adafruit Industries
* Copyright (c) 2019 Lucian Copeland for Adafruit Industries
*
* Permission is hereby granted, free of charge, to any person obtaining a copy
* of this software and associated documentation files (the "Software"), to deal
* in the Software without restriction, including without limitation the rights
* to use, copy, modify, merge, publish, distribute, sublicense, and/or sell
* copies of the Software, and to permit persons to whom the Software is
* furnished to do so, subject to the following conditions:
*
* The above copyright notice and this permission notice shall be included in
* all copies or substantial portions of the Software.
*
* THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
* IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
* FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE
* AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER
* LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM,
* OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN
* THE SOFTWARE.
*/
#include "shared-bindings/microcontroller/Pin.h"
2020-07-31 14:50:18 -04:00
#include "shared-bindings/digitalio/DigitalInOut.h"
#include "supervisor/shared/rgb_led_status.h"
#include "py/mphal.h"
2020-09-28 18:59:29 -04:00
#include "components/driver/include/driver/gpio.h"
#include "components/hal/include/hal/gpio_hal.h"
2020-07-31 14:50:18 -04:00
#ifdef MICROPY_HW_NEOPIXEL
bool neopixel_in_use;
#endif
STATIC uint32_t never_reset_pins[2];
STATIC uint32_t in_use[2];
bool apa102_mosi_in_use;
bool apa102_sck_in_use;
2020-12-07 13:57:47 -05:00
STATIC void floating_gpio_reset(gpio_num_t pin_number) {
// This is the same as gpio_reset_pin(), but without the pullup.
// Note that gpio_config resets the iomatrix to GPIO_FUNC as well.
gpio_config_t cfg = {
.pin_bit_mask = BIT64(pin_number),
.mode = GPIO_MODE_DISABLE,
.pull_up_en = false,
.pull_down_en = false,
.intr_type = GPIO_INTR_DISABLE,
};
gpio_config(&cfg);
PIN_FUNC_SELECT(GPIO_PIN_MUX_REG[pin_number], 0);
2020-12-07 13:57:47 -05:00
}
void never_reset_pin_number(gpio_num_t pin_number) {
if (pin_number == -1 ) {
return;
}
never_reset_pins[pin_number / 32] |= 1 << pin_number % 32;
}
void common_hal_never_reset_pin(const mcu_pin_obj_t* pin) {
never_reset_pin_number(pin->number);
}
// Mark pin as free and return it to a quiescent state.
void reset_pin_number(gpio_num_t pin_number) {
if (pin_number == -1 ) {
return;
}
never_reset_pins[pin_number / 32] &= ~(1 << pin_number % 32);
in_use[pin_number / 32] &= ~(1 << pin_number % 32);
2020-07-31 14:50:18 -04:00
2020-12-07 13:57:47 -05:00
floating_gpio_reset(pin_number);
2020-11-03 16:31:53 -05:00
2020-07-31 14:50:18 -04:00
#ifdef MICROPY_HW_NEOPIXEL
if (pin_number == MICROPY_HW_NEOPIXEL->number) {
neopixel_in_use = false;
rgb_led_status_init();
return;
}
#endif
}
void common_hal_reset_pin(const mcu_pin_obj_t* pin) {
reset_pin_number(pin->number);
}
void reset_all_pins(void) {
for (uint8_t i = 0; i < GPIO_PIN_COUNT; i++) {
uint32_t iomux_address = GPIO_PIN_MUX_REG[i];
if (iomux_address == 0 ||
(never_reset_pins[i / 32] & (1 << i % 32)) != 0) {
continue;
}
2020-12-07 13:57:47 -05:00
floating_gpio_reset(i);
}
in_use[0] = 0;
in_use[1] = 0;
2020-07-31 14:50:18 -04:00
#ifdef MICROPY_HW_NEOPIXEL
neopixel_in_use = false;
#endif
}
void claim_pin(const mcu_pin_obj_t* pin) {
in_use[pin->number / 32] |= (1 << (pin->number % 32));
2020-07-31 14:50:18 -04:00
#ifdef MICROPY_HW_NEOPIXEL
if (pin == MICROPY_HW_NEOPIXEL) {
neopixel_in_use = true;
}
#endif
}
2020-08-04 18:40:24 -04:00
void common_hal_mcu_pin_claim(const mcu_pin_obj_t* pin) {
claim_pin(pin);
}
bool pin_number_is_free(gpio_num_t pin_number) {
2020-07-31 14:50:18 -04:00
#ifdef MICROPY_HW_NEOPIXEL
if (pin_number == MICROPY_HW_NEOPIXEL->number) {
return !neopixel_in_use;
}
#endif
uint8_t offset = pin_number / 32;
uint32_t mask = 1 << (pin_number % 32);
return (never_reset_pins[offset] & mask) == 0 && (in_use[offset] & mask) == 0;
}
bool common_hal_mcu_pin_is_free(const mcu_pin_obj_t *pin) {
return pin_number_is_free(pin->number);
}