circuitpython/ports/raspberrypi/boards/pimoroni_picosystem/board.c

/*
 * This file is part of the MicroPython project, http://micropython.org/
 *
 * The MIT License (MIT)
 *
 * Copyright (c) 2021 Scott Shawcroft for Adafruit Industries
 *
 * Permission is hereby granted, free of charge, to any person obtaining a copy
 * of this software and associated documentation files (the "Software"), to deal
 * in the Software without restriction, including without limitation the rights
 * to use, copy, modify, merge, publish, distribute, sublicense, and/or sell
 * copies of the Software, and to permit persons to whom the Software is
 * furnished to do so, subject to the following conditions:
 *
 * The above copyright notice and this permission notice shall be included in
 * all copies or substantial portions of the Software.
 *
 * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
 * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
 * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE
 * AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER
 * LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM,
 * OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN
 * THE SOFTWARE.
 */

#include "supervisor/board.h"
#include "mpconfigboard.h"
#include "shared-bindings/busio/SPI.h"
#include "shared-bindings/displayio/FourWire.h"
#include "shared-module/displayio/__init__.h"
#include "shared-module/displayio/mipi_constants.h"
#include "supervisor/shared/board.h"

displayio_fourwire_obj_t board_display_obj;

#define DELAY 0x80

uint8_t display_init_sequence[] = {
    0x01, 0 | DELAY, 150, // SWRESET

    0x36, 1, 0x04, // MADCTL
    0x35, 1, 0x00, // TEON
    0xB2, 5, 0x0c, 0x0c, 0x00, 0x33, 0x33, // FRMCTR2
    0x3A, 1, 0x05, // COLMOD
    0xB7, 1, 0x14, // GCTRL
    0xBB, 1, 0x37, // VCOMS
    0xC0, 1, 0x2c, // LCMCTRL
    0xC2, 1, 0x01, // VDVVRHEN
    0xC3, 1, 0x12, // VRHS
    0xC4, 1, 0x20, // VDVS
    0xD0, 2, 0xa4, 0xa1, // PWRCTRL1
    0xC6, 1, 0x0f, // FRCTRL2
    0xE0, 14, 0xd0, 0x04, 0x0d, 0x11, 0x13, 0x2b, 0x3f, 0x54, 0x4c, 0x18, 0x0d, 0x0b, 0x1f, 0x23, // GMCTRP1
    0xE1, 14, 0xd0, 0x04, 0x0c, 0x11, 0x13, 0x2c, 0x3f, 0x44, 0x51, 0x2f, 0x1f, 0x1f, 0x20, 0x23, // GMCTRN1
    0x21, 0, // INVON

    0x11, 0 | DELAY, 255, // SLPOUT
    0x29, 0 | DELAY, 100, // DISPON

    0x2a, 4, 0x00, 0, 0x00, 0xfe, // CASET
    0x2b, 4, 0x00, 0, 0x00, 0xfe, // RASET
    0x2c, 0, // RAMWR
};

void board_init(void) {
    busio_spi_obj_t *spi = &displays[0].fourwire_bus.inline_bus;
    common_hal_busio_spi_construct(spi, &pin_GPIO6, &pin_GPIO7, NULL, false);
    common_hal_busio_spi_never_reset(spi);

    displayio_fourwire_obj_t *bus = &displays[0].fourwire_bus;
    bus->base.type = &displayio_fourwire_type;
    common_hal_displayio_fourwire_construct(bus,
        spi,
        &pin_GPIO9, // TFT_DC Command or data
        &pin_GPIO5, // TFT_CS Chip select
        &pin_GPIO4, // TFT_RST Reset
        60000000, // Baudrate
        0, // Polarity
        0); // Phase

    displayio_display_obj_t *display = &displays[0].display;
    display->base.type = &displayio_display_type;
    common_hal_displayio_display_construct(display,
        bus,
        240, // Width
        240, // Height
        0, // column start
        0, // row start
        0, // rotation
        16, // Color depth
        false, // Grayscale
        false, // pixels in a byte share a row. Only valid for depths < 8
        1, // bytes per cell. Only valid for depths < 8
        false, // reverse_pixels_in_byte. Only valid for depths < 8
        true, // reverse_bytes_in_word
        MIPI_COMMAND_SET_COLUMN_ADDRESS, // Set column command
        MIPI_COMMAND_SET_PAGE_ADDRESS, // Set row command
        MIPI_COMMAND_WRITE_MEMORY_START, // Write memory command
        display_init_sequence,
        sizeof(display_init_sequence),
        &pin_GPIO12,  // backlight pin
        NO_BRIGHTNESS_COMMAND,
        1.0f, // brightness
        false, // single_byte_bounds
        false, // data_as_commands
        true, // auto_refresh
        60, // native_frames_per_second
        true, // backlight_on_high
        false, // SH1107_addressing
        50000); // backlight pwm frequency
}

void board_deinit(void) {
}

bool board_requests_safe_mode(void) {
    return false;
}

void reset_board(void) {
}