2020-04-17 19:23:28 -04:00
|
|
|
# The following five lines of boilerplate have to be in your project's
|
|
|
|
|
# CMakeLists in this exact order for cmake to work correctly
|
2023-01-06 01:45:06 -05:00
|
|
|
cmake_minimum_required(VERSION 3.16)
|
2020-04-17 19:23:28 -04:00
|
|
|
|
|
|
|
|
set(ENV{IDF_PATH} ${CMAKE_SOURCE_DIR}/esp-idf)
|
2020-08-12 19:57:39 -04:00
|
|
|
|
2023-01-06 01:45:06 -05:00
|
|
|
# The component list here determines what options we get in menuconfig and what the ninja file can build.
|
2023-09-08 15:10:49 -04:00
|
|
|
set(COMPONENTS bt driver esp-tls esp_adc_cal esp_event esp_netif esp_psram esp_wifi esptool_py freertos log lwip main mbedtls mdns soc ulp usb wpa_supplicant esp-camera esp_lcd)
|
|
|
|
|
set(EXTRA_COMPONENT_DIRS "esp-protocols/components/mdns" "esp-camera")
|
add esp32-camera
This uses the esp32-camera code instead of our own homebrewed camera code.
In theory it supports esp32, esp32-s2 and esp32-s3, as long as they have
PSRAM.
This is very basic and doesn't support changing any camera parameters,
including switching resolution or pixelformat.
This is tested on the Kaluga (ESP32-S2) and ESP32-S3-Eye boards.
First, reserve some PSRAM by putting this line in `CIRCUITPY/_env`:
```
CIRCUITPY_RESERVED_PSRAM=524288
```
and hard-reset the board for it to take effect.
Now, the following script will take a very low-resolution jpeg file and print
it in the REPL in escape coded form:
```python
import board
import esp32_camera
c = esp32_camera.Camera(
data_pins=board.CAMERA_DATA,
external_clock_pin=board.CAMERA_XCLK,
pixel_clock_pin=board.CAMERA_PCLK,
vsync_pin=board.CAMERA_VSYNC,
href_pin=board.CAMERA_HREF,
pixel_format=esp32_camera.PixelFormat.JPEG,
i2c=board.I2C(),
external_clock_frequency=20_000_000)
m = c.take()
if m is not None:
print(bytes(m))
```
Then on desktop open a python repl and run something like
```python
>>> with open("my.jpg", "wb") as f: f.write(<BIG PASTE FROM REPL>)
```
and open my.jpg in a viewer.
2022-08-04 16:11:50 -04:00
|
|
|
|
2020-04-17 19:23:28 -04:00
|
|
|
include($ENV{IDF_PATH}/tools/cmake/project.cmake)
|
|
|
|
|
project(circuitpython)
|
|
|
|
|
|
|
|
|
|
idf_build_set_property(__OUTPUT_SDKCONFIG 0)
|
