circuitpython/ports/atmel-samd/boards/feather_m0_adalogger/mpconfigboard.h

// LEDs
#define MICROPY_HW_LED_STATUS   (&pin_PA17)

#define MICROPY_HW_BOARD_NAME "Adafruit Feather M0 Adalogger"
#define MICROPY_HW_MCU_NAME "samd21g18"

#define MICROPY_PORT_A        (0)
#define MICROPY_PORT_B        (0)
#define MICROPY_PORT_C        (0)

#define DEFAULT_I2C_BUS_SCL (&pin_PA22)
#define DEFAULT_I2C_BUS_SDA (&pin_PA23)

#define DEFAULT_SPI_BUS_SCK (&pin_PB11)
#define DEFAULT_SPI_BUS_MOSI (&pin_PB10)
#define DEFAULT_SPI_BUS_MISO (&pin_PA12)

#define DEFAULT_UART_BUS_RX (&pin_PA11)
#define DEFAULT_UART_BUS_TX (&pin_PA10)

// USB is always used internally so skip the pin objects for it.
#define IGNORE_PIN_PA24     1
#define IGNORE_PIN_PA25     1
[atmel-samd] add adalogger board definitions 2016-10-16 18:19:08 +02:00			`// LEDs`
Rework safe mode and have heap overwrite trigger it. This creates a common safe mode mechanic that ports can share. As a result, the nRF52 now has safe mode support as well. The common safe mode adds a 700ms delay at startup where a reset during that window will cause a reset into safe mode. This window is designated by a yellow status pixel and flashing the single led three times. A couple NeoPixel fixes are included for the nRF52 as well. Fixes #1034. Fixes #990. Fixes #615. 2018-12-06 14:24:20 -08:00			`#define MICROPY_HW_LED_STATUS (&pin_PA17)`

[atmel-samd] add adalogger board definitions 2016-10-16 18:19:08 +02:00			`#define MICROPY_HW_BOARD_NAME "Adafruit Feather M0 Adalogger"`
			`#define MICROPY_HW_MCU_NAME "samd21g18"`
atmel-samd: Support auto-reset based on USB write activity. It will soft-reboot micropython after a burst of writes to the file system. This means that after you save files on your computer they will be automatically rerun. This can be disabled in the build by unsetting AUTORESET_TIMER in mpconfigboard.h. Using the REPL will also prevent the soft resets until you reset with CTRL-D manually. 2016-10-25 14:27:59 -07:00
Move atmel-samd to tinyusb and support nRF flash. This started while adding USB MIDI support (and descriptor support is in this change.) When seeing that I'd have to implement the MIDI class logic twice, once for atmel-samd and once for nrf, I decided to refactor the USB stack so its shared across ports. This has led to a number of changes that remove items from the ports folder and move them into supervisor. Furthermore, we had external SPI flash support for nrf pending so I factored out the connection between the usb stack and the flash API as well. This PR also includes the QSPI support for nRF. 2018-10-19 18:46:22 -07:00			`#define MICROPY_PORT_A (0)`
atmel-samd & esp8266: Make sure pins are not already in use. This prevents corrupting previous functional objects by stealing their pins out from under them. It prevents this by ensuring that pins are in default state before claiming them. It also verifies pins are released correctly and reset on soft reset. Fixes #4, instantiating a second class will fail. Fixes #29, pins are now reset too. 2016-12-06 10:31:38 -08:00			`#define MICROPY_PORT_B (0)`
Move to ASF4 and introduce SAMD51 support. (#258) * atmel-samd: Remove ASF3. This will break builds. * atmel-samd: Add ASF4 for the SAMD21 and SAMD51. * Introduce the supervisor concept to facilitate porting. The supervisor is the code which runs individual MicroPython VMs. By splitting it out we make it more consistent and easier to find. This also adds very basic SAMD21 and SAMD51 support using the supervisor. Only the REPL currently works. This begins the work for #178. 2017-09-22 18:05:51 -07:00			`#define MICROPY_PORT_C (0)`
atmel-samd & esp8266: Make sure pins are not already in use. This prevents corrupting previous functional objects by stealing their pins out from under them. It prevents this by ensuring that pins are in default state before claiming them. It also verifies pins are released correctly and reset on soft reset. Fixes #4, instantiating a second class will fail. Fixes #29, pins are now reset too. 2016-12-06 10:31:38 -08:00
used pins.c instead of README.rst 2018-05-16 15:54:01 -04:00			`#define DEFAULT_I2C_BUS_SCL (&pin_PA22)`
			`#define DEFAULT_I2C_BUS_SDA (&pin_PA23)`
spi on much 2018-05-16 15:25:24 -04:00
SPI for all boards 2018-05-16 15:36:36 -04:00			`#define DEFAULT_SPI_BUS_SCK (&pin_PB11)`
spi on much 2018-05-16 15:25:24 -04:00			`#define DEFAULT_SPI_BUS_MOSI (&pin_PB10)`
			`#define DEFAULT_SPI_BUS_MISO (&pin_PA12)`
arduino, circuitplayground, feather boards 2018-05-17 13:42:08 -04:00
			`#define DEFAULT_UART_BUS_RX (&pin_PA11)`
			`#define DEFAULT_UART_BUS_TX (&pin_PA10)`
Turn off USB pin objects since they are always used for USB. 2018-06-06 12:07:28 -07:00
			`// USB is always used internally so skip the pin objects for it.`
			`#define IGNORE_PIN_PA24 1`
			`#define IGNORE_PIN_PA25 1`