djsundog/circuitpython
1
0
Fork 0
Code Issues Pull Requests Packages Projects Releases Wiki Activity
0cae6b8e68
circuitpython/atmel-samd/Makefile

215 lines
6.0 KiB
Makefile
Raw Normal View History

Blinking the LED works. Clocks should be set up correctly. Everything works fine without USB being plugged in but faults (I think) when USB is plugged in. This is switched away from the USB code from the bootloader onto the USB code thats generated by Atmel Studio using the high level classes from ASF.
2016-08-23 02:48:09 -04:00
# Select the board to build for: if not given on the command line,
# then default to PYBV10.
Add support for REPL on Arduino Zero through EDBG via UART.
2016-08-23 19:47:53 -04:00
BOARD ?= arduino_zero
Blinking the LED works. Clocks should be set up correctly. Everything works fine without USB being plugged in but faults (I think) when USB is plugged in. This is switched away from the USB code from the bootloader onto the USB code thats generated by Atmel Studio using the high level classes from ASF.
2016-08-23 02:48:09 -04:00
ifeq ($(wildcard boards/$(BOARD)/.),)
$(error Invalid BOARD specified)
endif
Compiled and linked SAMD21x18 version successfully.
2016-08-19 23:24:04 -04:00
Blinking the LED works. Clocks should be set up correctly. Everything works fine without USB being plugged in but faults (I think) when USB is plugged in. This is switched away from the USB code from the bootloader onto the USB code thats generated by Atmel Studio using the high level classes from ASF.
2016-08-23 02:48:09 -04:00
# If the build directory is not given, make it reflect the board name.
BUILD ?= build-$(BOARD)
include ../py/mkenv.mk
-include mpconfigport.mk
include boards/$(BOARD)/mpconfigboard.mk
Compiled and linked SAMD21x18 version successfully.
2016-08-19 23:24:04 -04:00
# qstr definitions (must come before including py.mk)
Blinking the LED works. Clocks should be set up correctly. Everything works fine without USB being plugged in but faults (I think) when USB is plugged in. This is switched away from the USB code from the bootloader onto the USB code thats generated by Atmel Studio using the high level classes from ASF.
2016-08-23 02:48:09 -04:00
# TODO(tannewt): Support friendly pin names like the stmhal implementations do.
# Add $(BUILD)/pins_qstr.h $(BUILD)/modstm_qstr.h
Compiled and linked SAMD21x18 version successfully.
2016-08-19 23:24:04 -04:00
QSTR_DEFS = qstrdefsport.h
# include py core make definitions
include ../py/py.mk
CROSS_COMPILE = arm-none-eabi-
BOSSAC := /Users/tannewt/ArduinoCore-samd/tools/bossac_osx
Blinking the LED works. Clocks should be set up correctly. Everything works fine without USB being plugged in but faults (I think) when USB is plugged in. This is switched away from the USB code from the bootloader onto the USB code thats generated by Atmel Studio using the high level classes from ASF.
2016-08-23 02:48:09 -04:00
HAL_DIR=hal/$(MCU_SERIES)
Compiled and linked SAMD21x18 version successfully.
2016-08-19 23:24:04 -04:00
INC += -I.
INC += -I..
INC += -I../lib/mp-readline
atmel/samd: Add filesystem support. 64k is stored in flash.
2016-09-02 20:00:30 -04:00
INC += -I../lib/timeutils
atmel-samd: Add I2C support. This commit also introduces a new shared-bindings directory which is used to store the common Python -> C binding code. By having a shared directory we can ensure that the Python API across ports is the same. Each port will have a corresponding common-hal directory which provides definitions for the C api used in the shared-bindings code. That way the compiler can enforce the C api. To migrate to this new shared API create a common-hal directory within your port and change the Makefile to compile both the shared-bindings and common-hal files. See atmel-samd/Makefile SRC_BINDINGS for an example.
2016-09-13 14:46:22 -04:00
INC += -Icommon-hal/modules/
Blinking the LED works. Clocks should be set up correctly. Everything works fine without USB being plugged in but faults (I think) when USB is plugged in. This is switched away from the USB code from the bootloader onto the USB code thats generated by Atmel Studio using the high level classes from ASF.
2016-08-23 02:48:09 -04:00
INC += -Iasf/common/boards/
INC += -Iasf/common/services/sleepmgr/
INC += -Iasf/common/services/usb/
INC += -Iasf/common/services/usb/class/cdc/
INC += -Iasf/common/services/usb/class/cdc/device/
INC += -Iasf/common/services/usb/udc/
INC += -Iasf/common/utils
INC += -Iasf/common2/services/delay/
INC += $(addprefix -Iasf/sam0/,\
drivers/extint/ \
drivers/port \
drivers/system \
atmel-samd: Initial ADC support.
2016-08-26 19:56:03 -04:00
drivers/adc/adc_sam_d_r \
atmel-samd: Add direct write access to the DAC output.
2016-08-27 18:04:34 -04:00
drivers/dac \
drivers/dac/dac_sam_d_c \
atmel-samd: Add I2C support. This commit also introduces a new shared-bindings directory which is used to store the common Python -> C binding code. By having a shared directory we can ensure that the Python API across ports is the same. Each port will have a corresponding common-hal directory which provides definitions for the C api used in the shared-bindings code. That way the compiler can enforce the C api. To migrate to this new shared API create a common-hal directory within your port and change the Makefile to compile both the shared-bindings and common-hal files. See atmel-samd/Makefile SRC_BINDINGS for an example.
2016-09-13 14:46:22 -04:00
drivers/sercom \
drivers/sercom/i2c \
Blinking the LED works. Clocks should be set up correctly. Everything works fine without USB being plugged in but faults (I think) when USB is plugged in. This is switched away from the USB code from the bootloader onto the USB code thats generated by Atmel Studio using the high level classes from ASF.
2016-08-23 02:48:09 -04:00
drivers/system/clock \
drivers/system/clock/clock_samd21_r21_da \
drivers/system/interrupt \
drivers/system/interrupt/system_interrupt_samd21 \
drivers/system/pinmux \
drivers/system/power/power_sam_d_r \
drivers/system/reset/reset_sam_d_r \
atmel-samd: Add I2C support. This commit also introduces a new shared-bindings directory which is used to store the common Python -> C binding code. By having a shared directory we can ensure that the Python API across ports is the same. Each port will have a corresponding common-hal directory which provides definitions for the C api used in the shared-bindings code. That way the compiler can enforce the C api. To migrate to this new shared API create a common-hal directory within your port and change the Makefile to compile both the shared-bindings and common-hal files. See atmel-samd/Makefile SRC_BINDINGS for an example.
2016-09-13 14:46:22 -04:00
drivers/tc \
drivers/usb \
Blinking the LED works. Clocks should be set up correctly. Everything works fine without USB being plugged in but faults (I think) when USB is plugged in. This is switched away from the USB code from the bootloader onto the USB code thats generated by Atmel Studio using the high level classes from ASF.
2016-08-23 02:48:09 -04:00
utils \
utils/cmsis/samd21/include \
utils/cmsis/samd21/source \
utils/header_files \
utils/preprocessor \
)
INC += -Iasf/thirdparty/CMSIS/Include
INC += -Iboards/$(BOARD)/
Compiled and linked SAMD21x18 version successfully.
2016-08-19 23:24:04 -04:00
INC += -I$(BUILD)
atmel-samd: Support floats.
2016-08-31 16:37:43 -04:00
CFLAGS_CORTEX_M0 = \
-mthumb \
-mabi=aapcs-linux \
-mcpu=cortex-m0plus \
-msoft-float \
-mfloat-abi=soft \
-fsingle-precision-constant \
-Wdouble-promotion \
-D__SAMD21G18A__ \
-DUSB_DEVICE_PRODUCT_ID=0x024D \
-DUSB_DEVICE_VENDOR_ID=0x4123 \
-DBOARD=USER_BOARD \
-ffunction-sections \
-fdata-sections \
-fshort-enums \
-D ARM_MATH_CM0PLUS=true \
-DSYSTICK_MODE \
-DEXTINT_CALLBACK_MODE=true \
-DUDD_ENABLE \
-DUSART_CALLBACK_MODE=true \
-DUSB_DEVICE_LPM_SUPPORT
Compiled and linked SAMD21x18 version successfully.
2016-08-19 23:24:04 -04:00
CFLAGS = $(INC) -Wall -Werror -ansi -std=gnu99 -nostdlib $(CFLAGS_CORTEX_M0) $(COPT)
#Debugging/Optimization
ifeq ($(DEBUG), 1)
atmel/samd: Add filesystem support. 64k is stored in flash.
2016-09-02 20:00:30 -04:00
CFLAGS += -Os -ggdb
Compiled and linked SAMD21x18 version successfully.
2016-08-19 23:24:04 -04:00
else
atmel-samd: Re-enable -Os (size) optimizations.
2016-08-31 03:16:39 -04:00
CFLAGS += -Os -DNDEBUG
Compiled and linked SAMD21x18 version successfully.
2016-08-19 23:24:04 -04:00
endif
LIBGCC_FILE_NAME = $(shell $(CC) $(CFLAGS) -print-libgcc-file-name)
atmel-samd: Support floats.
2016-08-31 16:37:43 -04:00
LIBM_FILE_NAME = $(shell $(CC) $(CFLAGS) -print-file-name=libm.a)
LDFLAGS = -Lasf/thirdparty/CMSIS/Lib/GCC/ -L $(dir $(LIBGCC_FILE_NAME)) -L $(dir $(LIBM_FILE_NAME)) -nostdlib -T $(LD_FILE) -Map=$@.map --cref --gc-sections
atmel-samd: Add I2C support. This commit also introduces a new shared-bindings directory which is used to store the common Python -> C binding code. By having a shared directory we can ensure that the Python API across ports is the same. Each port will have a corresponding common-hal directory which provides definitions for the C api used in the shared-bindings code. That way the compiler can enforce the C api. To migrate to this new shared API create a common-hal directory within your port and change the Makefile to compile both the shared-bindings and common-hal files. See atmel-samd/Makefile SRC_BINDINGS for an example.
2016-09-13 14:46:22 -04:00
LIBS = -larm_cortexM0l_math -lm -lgcc -lc
Compiled and linked SAMD21x18 version successfully.
2016-08-19 23:24:04 -04:00
Blinking the LED works. Clocks should be set up correctly. Everything works fine without USB being plugged in but faults (I think) when USB is plugged in. This is switched away from the USB code from the bootloader onto the USB code thats generated by Atmel Studio using the high level classes from ASF.
2016-08-23 02:48:09 -04:00
SRC_ASF = $(addprefix asf/sam0/,\
atmel-samd: Add direct write access to the DAC output.
2016-08-27 18:04:34 -04:00
drivers/adc/adc_sam_d_r/adc.c \
drivers/dac/dac_sam_d_c/dac.c \
atmel/samd: Add filesystem support. 64k is stored in flash.
2016-09-02 20:00:30 -04:00
drivers/nvm/nvm.c \
Blinking the LED works. Clocks should be set up correctly. Everything works fine without USB being plugged in but faults (I think) when USB is plugged in. This is switched away from the USB code from the bootloader onto the USB code thats generated by Atmel Studio using the high level classes from ASF.
2016-08-23 02:48:09 -04:00
drivers/port/port.c \
atmel-samd: Add I2C support. This commit also introduces a new shared-bindings directory which is used to store the common Python -> C binding code. By having a shared directory we can ensure that the Python API across ports is the same. Each port will have a corresponding common-hal directory which provides definitions for the C api used in the shared-bindings code. That way the compiler can enforce the C api. To migrate to this new shared API create a common-hal directory within your port and change the Makefile to compile both the shared-bindings and common-hal files. See atmel-samd/Makefile SRC_BINDINGS for an example.
2016-09-13 14:46:22 -04:00
drivers/sercom/i2c/i2c_sam0/i2c_master.c \
Add support for REPL on Arduino Zero through EDBG via UART.
2016-08-23 19:47:53 -04:00
drivers/sercom/sercom.c \
drivers/sercom/sercom_interrupt.c \
drivers/sercom/usart/usart.c \
drivers/sercom/usart/usart_interrupt.c \
Blinking the LED works. Clocks should be set up correctly. Everything works fine without USB being plugged in but faults (I think) when USB is plugged in. This is switched away from the USB code from the bootloader onto the USB code thats generated by Atmel Studio using the high level classes from ASF.
2016-08-23 02:48:09 -04:00
drivers/system/clock/clock_samd21_r21_da/clock.c \
drivers/system/clock/clock_samd21_r21_da/gclk.c \
Add support for REPL on Arduino Zero through EDBG via UART.
2016-08-23 19:47:53 -04:00
drivers/system/interrupt/system_interrupt.c \
Blinking the LED works. Clocks should be set up correctly. Everything works fine without USB being plugged in but faults (I think) when USB is plugged in. This is switched away from the USB code from the bootloader onto the USB code thats generated by Atmel Studio using the high level classes from ASF.
2016-08-23 02:48:09 -04:00
drivers/system/pinmux/pinmux.c \
drivers/system/system.c \
atmel/samd: Add basic PWM support which only allows for changing the duty.
2016-08-30 16:10:52 -04:00
drivers/tc/tc_sam_d_r/tc.c \
drivers/tcc/tcc.c \
Blinking the LED works. Clocks should be set up correctly. Everything works fine without USB being plugged in but faults (I think) when USB is plugged in. This is switched away from the USB code from the bootloader onto the USB code thats generated by Atmel Studio using the high level classes from ASF.
2016-08-23 02:48:09 -04:00
drivers/usb/stack_interface/usb_device_udd.c \
drivers/usb/stack_interface/usb_dual.c \
drivers/usb/usb_sam_d_r/usb.c \
)
Compiled and linked SAMD21x18 version successfully.
2016-08-19 23:24:04 -04:00
SRC_C = \
atmel/samd: Add filesystem support. 64k is stored in flash.
2016-09-02 20:00:30 -04:00
builtin_open.c \
fatfs_port.c \
Compiled and linked SAMD21x18 version successfully.
2016-08-19 23:24:04 -04:00
main.c \
atmel-samd: Support Digital IO pins. Also bumps up the heap size.
2016-08-24 20:38:08 -04:00
modmachine.c \
atmel-samd: Rename module classes so they don't conflict with names from ASF.
2016-08-28 03:02:05 -04:00
modmachine_adc.c \
modmachine_dac.c \
modmachine_pin.c \
atmel/samd: Add basic PWM support which only allows for changing the duty.
2016-08-30 16:10:52 -04:00
modmachine_pwm.c \
atmel/samd: Add filesystem support. 64k is stored in flash.
2016-09-02 20:00:30 -04:00
moduos.c \
atmel-samd: Add limited time module support.
2016-08-24 16:17:55 -04:00
modutime.c \
Blinking the LED works. Clocks should be set up correctly. Everything works fine without USB being plugged in but faults (I think) when USB is plugged in. This is switched away from the USB code from the bootloader onto the USB code thats generated by Atmel Studio using the high level classes from ASF.
2016-08-23 02:48:09 -04:00
mphalport.c \
atmel-samd: Support Digital IO pins. Also bumps up the heap size.
2016-08-24 20:38:08 -04:00
pin_named_pins.c \
atmel/samd: Add filesystem support. 64k is stored in flash.
2016-09-02 20:00:30 -04:00
storage.c \
Add support for REPL on Arduino Zero through EDBG via UART.
2016-08-23 19:47:53 -04:00
uart.c \
Blinking the LED works. Clocks should be set up correctly. Everything works fine without USB being plugged in but faults (I think) when USB is plugged in. This is switched away from the USB code from the bootloader onto the USB code thats generated by Atmel Studio using the high level classes from ASF.
2016-08-23 02:48:09 -04:00
asf/common/services/sleepmgr/samd/sleepmgr.c \
asf/common/services/usb/class/cdc/device/udi_cdc.c \
asf/common/services/usb/class/cdc/device/udi_cdc_desc.c \
asf/common/services/usb/udc/udc.c \
asf/common/utils/interrupt/interrupt_sam_nvic.c \
asf/common2/services/delay/sam0/systick_counter.c \
Add support for REPL on Arduino Zero through EDBG via UART.
2016-08-23 19:47:53 -04:00
asf/sam0/utils/cmsis/samd21/source/gcc/startup_samd21.c \
atmel-samd: Add I2C support. This commit also introduces a new shared-bindings directory which is used to store the common Python -> C binding code. By having a shared directory we can ensure that the Python API across ports is the same. Each port will have a corresponding common-hal directory which provides definitions for the C api used in the shared-bindings code. That way the compiler can enforce the C api. To migrate to this new shared API create a common-hal directory within your port and change the Makefile to compile both the shared-bindings and common-hal files. See atmel-samd/Makefile SRC_BINDINGS for an example.
2016-09-13 14:46:22 -04:00
asf/sam0/utils/cmsis/samd21/source/system_samd21.c \
Add support for REPL on Arduino Zero through EDBG via UART.
2016-08-23 19:47:53 -04:00
asf/sam0/utils/syscalls/gcc/syscalls.c \
atmel-samd: Support raw repl and soft reset to support ampy. Closes #1. Also adds TX and RX led support on the Arduino Zero.
2016-09-15 20:01:19 -04:00
boards/$(BOARD)/init.c \
atmel-samd: Support Digital IO pins. Also bumps up the heap size.
2016-08-24 20:38:08 -04:00
boards/$(BOARD)/pins.c \
atmel/samd: Add filesystem support. 64k is stored in flash.
2016-09-02 20:00:30 -04:00
lib/fatfs/ff.c \
lib/fatfs/option/ccsbcs.c \
lib/timeutils/timeutils.c \
Compiled and linked SAMD21x18 version successfully.
2016-08-19 23:24:04 -04:00
lib/utils/stdout_helpers.c \
lib/utils/pyexec.c \
lib/libc/string0.c \
atmel-samd: Add limited time module support.
2016-08-24 16:17:55 -04:00
lib/mp-readline/readline.c
atmel-samd: Add I2C support. This commit also introduces a new shared-bindings directory which is used to store the common Python -> C binding code. By having a shared directory we can ensure that the Python API across ports is the same. Each port will have a corresponding common-hal directory which provides definitions for the C api used in the shared-bindings code. That way the compiler can enforce the C api. To migrate to this new shared API create a common-hal directory within your port and change the Makefile to compile both the shared-bindings and common-hal files. See atmel-samd/Makefile SRC_BINDINGS for an example.
2016-09-13 14:46:22 -04:00
# TODO(tannewt): Use this sed line to extract the RST docs from these sources:
# sed': sed -n 's+^//|++p' ../api/machine.c
#
# RST lines are prefixed with //|
SRC_BINDINGS = \
modules/machine.c
SRC_BINDINGS_EXPANDED = $(addprefix shared-bindings/, $(SRC_BINDINGS)) \
$(addprefix common-hal/, $(SRC_BINDINGS))
atmel-samd: Add limited time module support.
2016-08-24 16:17:55 -04:00
SRC_AUTOGEN = \
$(BUILD)/_frozen_mpy.c \
Compiled and linked SAMD21x18 version successfully.
2016-08-19 23:24:04 -04:00
OBJ = $(PY_O) $(addprefix $(BUILD)/, $(SRC_C:.c=.o))
Blinking the LED works. Clocks should be set up correctly. Everything works fine without USB being plugged in but faults (I think) when USB is plugged in. This is switched away from the USB code from the bootloader onto the USB code thats generated by Atmel Studio using the high level classes from ASF.
2016-08-23 02:48:09 -04:00
OBJ += $(addprefix $(BUILD)/, $(SRC_ASF:.c=.o))
atmel-samd: Add limited time module support.
2016-08-24 16:17:55 -04:00
OBJ += $(addprefix $(BUILD)/, $(SRC_AUTOGEN:.c=.o))
atmel-samd: Add I2C support. This commit also introduces a new shared-bindings directory which is used to store the common Python -> C binding code. By having a shared directory we can ensure that the Python API across ports is the same. Each port will have a corresponding common-hal directory which provides definitions for the C api used in the shared-bindings code. That way the compiler can enforce the C api. To migrate to this new shared API create a common-hal directory within your port and change the Makefile to compile both the shared-bindings and common-hal files. See atmel-samd/Makefile SRC_BINDINGS for an example.
2016-09-13 14:46:22 -04:00
OBJ += $(addprefix $(BUILD)/, $(SRC_BINDINGS_EXPANDED:.c=.o))
atmel-samd: Add limited time module support.
2016-08-24 16:17:55 -04:00
atmel-samd: Add I2C support. This commit also introduces a new shared-bindings directory which is used to store the common Python -> C binding code. By having a shared directory we can ensure that the Python API across ports is the same. Each port will have a corresponding common-hal directory which provides definitions for the C api used in the shared-bindings code. That way the compiler can enforce the C api. To migrate to this new shared API create a common-hal directory within your port and change the Makefile to compile both the shared-bindings and common-hal files. See atmel-samd/Makefile SRC_BINDINGS for an example.
2016-09-13 14:46:22 -04:00
SRC_QSTR += $(SRC_C) $(SRC_BINDINGS_EXPANDED)
Compiled and linked SAMD21x18 version successfully.
2016-08-19 23:24:04 -04:00
all: $(BUILD)/firmware.bin
$(BUILD)/_frozen_mpy.c: frozentest.mpy $(BUILD)/genhdr/qstrdefs.generated.h
$(ECHO) "MISC freezing bytecode"
$(Q)../tools/mpy-tool.py -f -q $(BUILD)/genhdr/qstrdefs.preprocessed.h -mlongint-impl=none $< > $@
$(BUILD)/firmware.elf: $(OBJ)
$(ECHO) "LINK $@"
$(Q)$(LD) $(LDFLAGS) -o $@ $^ $(LIBS)
$(Q)$(SIZE) $@
$(BUILD)/firmware.bin: $(BUILD)/firmware.elf
$(ECHO) "Create $@"
Add support for REPL on Arduino Zero through EDBG via UART.
2016-08-23 19:47:53 -04:00
$(Q)$(OBJCOPY) -O binary -j .vectors -j .text -j .data $^ $@
Compiled and linked SAMD21x18 version successfully.
2016-08-19 23:24:04 -04:00
deploy: $(BUILD)/firmware.bin
$(ECHO) "Writing $< to the board"
$(BOSSAC) -u $<
# Run emulation build on a POSIX system with suitable terminal settings
run:
stty raw opost -echo
build/firmware.elf
@echo Resetting terminal...
# This sleep is useful to spot segfaults
sleep 1
reset
test: $(BUILD)/firmware.elf
$(Q)/bin/echo -e "print('hello world!', list(x+1 for x in range(10)), end='eol\\\\n')\\r\\n\\x04" | $(BUILD)/firmware.elf | tail -n2 | grep "^hello world! \\[1, 2, 3, 4, 5, 6, 7, 8, 9, 10\\]eol"
include ../py/mkrules.mk
Reference in New Issue Copy Permalink