djsundog
/
circuitpython
1
0
Fork 0
Code Issues Pull Requests Packages Projects Releases Wiki Activity
circuitpython/ports/stm32/boards/STM32L476DISC/mpconfigboard.mk

8 lines
220 B
Makefile
Raw Normal View History

stmhal: L4: Add board definition files for STM32L476DISC.
2016-03-15 05:15:01 -04:00
MCU_SERIES = l4
CMSIS_MCU = STM32L476xx
AF_FILE = boards/stm32l476_af.csv
stm32/boards: Allow boards to have finer control over the linker script. This patch allows a particular board to independently specify the linker scripts for 1) the MCU memory layout; 2) how the different firmware sections are arranged in memory. Right now all boards follow the same layout with two separate firmware section, one for the ISR and one for the text and data. This leaves room for storage (filesystem data) to live between the firmware sections. The idea with this patch is to accommodate boards that don't have internal flash storage and only need to have one continuous firmware section. Thus the common.ld script is renamed to common_ifs.ld to make explicit that it is used for cases where the board has internal flash storage.
2018-03-27 06:17:48 -04:00
LD_FILES = boards/stm32l476xg.ld boards/common_ifs.ld
stm32/Makefile: Allow a board to config either 1 or 2 firmware sections. This patch forces a board to explicitly define TEXT1_ADDR in order to split the firmware into two separate pieces. Otherwise the default is now to produce only a single continuous firmware image with all ISR, text and data together.
2018-03-27 06:24:15 -04:00
TEXT0_ADDR = 0x08000000
stm32/Makefile: Rename FLASH_ADDR/TEXT_ADDR to TEXT0_ADDR/TEXT1_ADDR. To make it clearer that these addresses are both for firmware text and that they have a prescribed ordering.
2018-03-27 06:20:04 -04:00
TEXT1_ADDR = 0x08004000
stmhal: Add address parameters to openocd config files. Also make l4 config the default for STM32L476DISC board.
2016-11-26 11:34:31 -05:00
OPENOCD_CONFIG = boards/openocd_stm32l4.cfg