circuitpython/ports/stm32/boards/STM32L476DISC/mpconfigboard.mk

MCU_SERIES = l4
CMSIS_MCU = STM32L476xx
AF_FILE = boards/stm32l476_af.csv
LD_FILES = boards/stm32l476xg.ld boards/common_ifs.ld
TEXT1_ADDR = 0x08004000
OPENOCD_CONFIG = boards/openocd_stm32l4.cfg
stmhal: L4: Add board definition files for STM32L476DISC. 2016-03-15 05:15:01 -04:00			`MCU_SERIES = l4`
			`CMSIS_MCU = STM32L476xx`
			`AF_FILE = boards/stm32l476_af.csv`
stm32/boards: Allow boards to have finer control over the linker script. This patch allows a particular board to independently specify the linker scripts for 1) the MCU memory layout; 2) how the different firmware sections are arranged in memory. Right now all boards follow the same layout with two separate firmware section, one for the ISR and one for the text and data. This leaves room for storage (filesystem data) to live between the firmware sections. The idea with this patch is to accommodate boards that don't have internal flash storage and only need to have one continuous firmware section. Thus the common.ld script is renamed to common_ifs.ld to make explicit that it is used for cases where the board has internal flash storage. 2018-03-27 06:17:48 -04:00			`LD_FILES = boards/stm32l476xg.ld boards/common_ifs.ld`
stm32/Makefile: Rename FLASH_ADDR/TEXT_ADDR to TEXT0_ADDR/TEXT1_ADDR. To make it clearer that these addresses are both for firmware text and that they have a prescribed ordering. 2018-03-27 06:20:04 -04:00			`TEXT1_ADDR = 0x08004000`
stmhal: Add address parameters to openocd config files. Also make l4 config the default for STM32L476DISC board. 2016-11-26 11:34:31 -05:00			`OPENOCD_CONFIG = boards/openocd_stm32l4.cfg`