| .. |
|
microview
|
Added source code
|
2019-06-08 22:10:47 +01:00 |
|
axial.scad
|
Renamed meters to LED_meters and added ammeter version.
|
2020-04-21 21:50:38 +01:00 |
|
axials.scad
|
Added axial PCB mounted resistors.
|
2020-04-14 18:09:58 +01:00 |
|
ball_bearing.scad
|
Ball bearing chamfer less and 6808 hub corrected.
|
2020-04-11 23:46:37 +01:00 |
|
ball_bearings.scad
|
Ball bearing chamfer less and 6808 hub corrected.
|
2020-04-11 23:46:37 +01:00 |
|
batteries.scad
|
Screws.scad is now included in core.scad, so doesn't need to be included
|
2020-02-29 17:52:36 +00:00 |
|
battery.scad
|
Removed the height parameter from linear_extrude
|
2020-03-29 20:18:57 +01:00 |
|
belt.scad
|
Removed the height parameter from linear_extrude
|
2020-03-29 20:18:57 +01:00 |
|
belts.scad
|
Added source code
|
2019-06-08 22:10:47 +01:00 |
|
blower.scad
|
Removed the height parameter from linear_extrude
|
2020-03-29 20:18:57 +01:00 |
|
blowers.scad
|
Small typo fix for blower RB5015 in source (string) and documentation
|
2019-10-21 17:17:11 +02:00 |
|
bulldog.scad
|
Screws.scad is now included in core.scad, so doesn't need to be included
|
2020-02-29 17:52:36 +00:00 |
|
bulldogs.scad
|
Added source code
|
2019-06-08 22:10:47 +01:00 |
|
button.scad
|
Screws.scad is now included in core.scad, so doesn't need to be included
|
2020-02-29 17:52:36 +00:00 |
|
buttons.scad
|
Added source code
|
2019-06-08 22:10:47 +01:00 |
|
cable_strip.scad
|
Colour now always spelt colour except the call to color().
|
2020-03-29 20:39:17 +01:00 |
|
circlip.scad
|
Removed the height parameter from linear_extrude
|
2020-03-29 20:18:57 +01:00 |
|
circlips.scad
|
Added circlips.
|
2020-03-24 17:22:32 +00:00 |
|
component.scad
|
Added TUK FACK2SPM Cat5E RJ45 shielded panel mount coupler.
|
2020-05-30 15:29:28 +01:00 |
|
components.scad
|
Added source code
|
2019-06-08 22:10:47 +01:00 |
|
d_connector.scad
|
Colour now always spelt colour except the call to color().
|
2020-03-29 20:39:17 +01:00 |
|
d_connectors.scad
|
Added source code
|
2019-06-08 22:10:47 +01:00 |
|
dip.scad
|
Added PDIP ICS and sockets.
|
2020-04-13 18:06:09 +01:00 |
|
display.scad
|
Screws.scad is now included in core.scad, so doesn't need to be included
|
2020-02-29 17:52:36 +00:00 |
|
displays.scad
|
Added S-7282B LCD display
|
2019-10-22 16:12:00 +01:00 |
|
e3d.scad
|
Resistor wire drawn even if naked=true.
|
2020-01-10 12:26:56 +00:00 |
|
extrusion.scad
|
Allow no center hole in extrusion.
|
2020-03-02 19:06:53 +00:00 |
|
extrusion_bracket.scad
|
Screws.scad is now included in core.scad, so doesn't need to be included
|
2020-02-29 17:52:36 +00:00 |
|
extrusion_brackets.scad
|
Naming update.
|
2020-02-25 22:23:44 +00:00 |
|
extrusions.scad
|
Added E1515 extrusion.
|
2020-03-02 18:51:27 +00:00 |
|
fan.scad
|
Removed the height parameter from linear_extrude
|
2020-03-29 20:18:57 +01:00 |
|
fans.scad
|
Screws.scad is now included in core.scad, so doesn't need to be included
|
2020-02-29 17:52:36 +00:00 |
|
fuseholder.scad
|
Removed the height parameter from linear_extrude
|
2020-03-29 20:18:57 +01:00 |
|
geared_stepper.scad
|
Removed the height parameter from linear_extrude
|
2020-03-29 20:18:57 +01:00 |
|
geared_steppers.scad
|
Added small geared stepper and driver board.
|
2019-08-18 11:46:33 +01:00 |
|
green_terminal.scad
|
Added yet another type of green terminal that is blue.
|
2020-04-08 19:38:52 +01:00 |
|
green_terminals.scad
|
Added yet another type of green terminal that is blue.
|
2020-04-08 19:38:52 +01:00 |
|
hot_end.scad
|
Adds an option resistor_wire_rotate
|
2019-10-21 17:51:19 +02:00 |
|
hot_ends.scad
|
Added source code
|
2019-06-08 22:10:47 +01:00 |
|
hygrometer.scad
|
Fixed typo
|
2020-05-02 11:50:01 +01:00 |
|
iec.scad
|
Removed the height parameter from linear_extrude
|
2020-03-29 20:18:57 +01:00 |
|
iecs.scad
|
Screws.scad is now included in core.scad, so doesn't need to be included
|
2020-02-29 17:52:36 +00:00 |
|
insert.scad
|
Removed the height parameter from linear_extrude
|
2020-03-29 20:18:57 +01:00 |
|
inserts.scad
|
Moved washers.scad from screws.scad to nuts.scad.
|
2020-02-26 13:46:11 +00:00 |
|
jack.scad
|
Removed the height parameter from linear_extrude
|
2020-03-29 20:18:57 +01:00 |
|
jhead.scad
|
Removed the height parameter from linear_extrude
|
2020-03-29 20:18:57 +01:00 |
|
kp_pillow_block.scad
|
Colour now always spelt colour except the call to color().
|
2020-03-29 20:39:17 +01:00 |
|
kp_pillow_blocks.scad
|
Screws.scad is now included in core.scad, so doesn't need to be included
|
2020-02-29 17:52:36 +00:00 |
|
ldr.scad
|
Removed the height parameter from linear_extrude
|
2020-03-29 20:18:57 +01:00 |
|
ldrs.scad
|
LDRs thicker
|
2019-07-29 16:39:09 +01:00 |
|
leadnut.scad
|
Removed the height parameter from linear_extrude
|
2020-03-29 20:18:57 +01:00 |
|
leadnuts.scad
|
Added screw threads to most things that are threaded.
|
2020-02-22 19:44:01 +00:00 |
|
led.scad
|
LEDs can now be placed on PCBs.
|
2020-04-10 12:41:05 +01:00 |
|
led_meter.scad
|
Added meter_shunt_y() function to led_meter.
|
2020-05-26 15:19:38 +01:00 |
|
led_meters.scad
|
led_ammeter size tweaks.
|
2020-04-25 19:38:43 +01:00 |
|
leds.scad
|
Change LED.scad to led.scad
|
2019-06-25 10:35:41 +02:00 |
|
light_strip.scad
|
Removed the height parameter from linear_extrude
|
2020-03-29 20:18:57 +01:00 |
|
light_strips.scad
|
Added source code
|
2019-06-08 22:10:47 +01:00 |
|
linear_bearing.scad
|
Added seal lip to linear_bearings.
|
2020-03-24 17:20:59 +00:00 |
|
linear_bearings.scad
|
Updated readme and images for linear_bearings change.
|
2020-01-11 08:57:33 +00:00 |
|
mains_socket.scad
|
Removed the height parameter from linear_extrude
|
2020-03-29 20:18:57 +01:00 |
|
mains_sockets.scad
|
Added source code
|
2019-06-08 22:10:47 +01:00 |
|
microswitch.scad
|
Colour now always spelt colour except the call to color().
|
2020-03-29 20:39:17 +01:00 |
|
microswitches.scad
|
Added source code
|
2019-06-08 22:10:47 +01:00 |
|
microview.scad
|
Removed the height parameter from linear_extrude
|
2020-03-29 20:18:57 +01:00 |
|
module.scad
|
Removed the height parameter from linear_extrude
|
2020-03-29 20:18:57 +01:00 |
|
modules.scad
|
Added source code
|
2019-06-08 22:10:47 +01:00 |
|
nut.scad
|
Removed the height parameter from linear_extrude
|
2020-03-29 20:18:57 +01:00 |
|
nuts.scad
|
Nuts can now have non-standard pitch, toggle switch nut pitch fixed.
|
2020-03-24 17:29:29 +00:00 |
|
o_ring.scad
|
Screws.scad is now included in core.scad, so doesn't need to be included
|
2020-02-29 17:52:36 +00:00 |
|
opengrab.scad
|
Removed the height parameter from linear_extrude
|
2020-03-29 20:18:57 +01:00 |
|
panel_meter.scad
|
Modelled DSP5005 power supply module as a panel_meter.
|
2020-05-02 20:42:26 +01:00 |
|
panel_meters.scad
|
Modelled DSP5005 power supply module as a panel_meter.
|
2020-05-02 20:42:26 +01:00 |
|
pcb.scad
|
Fixed pin header parameter values passed from PCBs.
|
2020-05-18 15:27:22 +01:00 |
|
pcbs.scad
|
More precise led positions on WD2002SJ pcb.
|
2020-04-25 19:39:16 +01:00 |
|
pillar.scad
|
Removed the height parameter from linear_extrude
|
2020-03-29 20:18:57 +01:00 |
|
pillars.scad
|
Added male screw threads.
|
2020-01-10 10:26:12 +00:00 |
|
pin_header.scad
|
Fixed PCB cutouts bugs, i.e. components drawn instead of cutouts.
|
2020-04-30 13:31:20 +01:00 |
|
pin_headers.scad
|
Added JST-XH connector for pcbs.
|
2020-01-30 05:45:29 +00:00 |
|
psu.scad
|
Removed the height parameter from linear_extrude
|
2020-03-29 20:18:57 +01:00 |
|
psus.scad
|
Changed PSU list order to get all the shrouds together.
|
2020-02-29 08:55:40 +00:00 |
|
pulley.scad
|
Removed the height parameter from linear_extrude
|
2020-03-29 20:18:57 +01:00 |
|
pulleys.scad
|
Screws.scad is now included in core.scad, so doesn't need to be included
|
2020-02-29 17:52:36 +00:00 |
|
rail.scad
|
Colour now always spelt colour except the call to color().
|
2020-03-29 20:39:17 +01:00 |
|
rails.scad
|
Added source code
|
2019-06-08 22:10:47 +01:00 |
|
ring_terminal.scad
|
Removed the height parameter from linear_extrude
|
2020-03-29 20:18:57 +01:00 |
|
ring_terminals.scad
|
Added crimp version of ring terminal.
|
2019-10-22 16:12:58 +01:00 |
|
rocker.scad
|
Removed the height parameter from linear_extrude
|
2020-03-29 20:18:57 +01:00 |
|
rockers.scad
|
Added source code
|
2019-06-08 22:10:47 +01:00 |
|
rod.scad
|
Screws.scad is now included in core.scad, so doesn't need to be included
|
2020-02-29 17:52:36 +00:00 |
|
screw.scad
|
Screw_and_washer() no longer adds washers for countersunk screws.
|
2020-05-18 15:29:19 +01:00 |
|
screws.scad
|
Moved washers.scad from screws.scad to nuts.scad.
|
2020-02-26 13:46:11 +00:00 |
|
scs_bearing_block.scad
|
Colour now always spelt colour except the call to color().
|
2020-03-29 20:39:17 +01:00 |
|
scs_bearing_blocks.scad
|
Fixed long SCS_bearing blocks to use two short bearings and added circlips.
|
2020-03-24 17:24:08 +00:00 |
|
sealing_strip.scad
|
Removed the height parameter from linear_extrude
|
2020-03-29 20:18:57 +01:00 |
|
sheet.scad
|
Renders of dxfs now use the sheet colour.
|
2020-04-07 22:07:28 +01:00 |
|
sheets.scad
|
Added 2mm acrylic sheets.
|
2019-08-18 12:04:58 +01:00 |
|
sk_bracket.scad
|
Colour now always spelt colour except the call to color().
|
2020-03-29 20:39:17 +01:00 |
|
sk_brackets.scad
|
Screws.scad is now included in core.scad, so doesn't need to be included
|
2020-02-29 17:52:36 +00:00 |
|
smd.scad
|
Added poly_drill() and used it for LED and trimpot cutouts.
|
2020-04-23 23:13:10 +01:00 |
|
smds.scad
|
Added SMD 0805 LEDs.
|
2020-04-21 11:02:48 +01:00 |
|
spade.scad
|
Removed the height parameter from linear_extrude
|
2020-03-29 20:18:57 +01:00 |
|
spades.scad
|
IEC mains connector models more accurate.
|
2019-06-20 11:59:13 +01:00 |
|
spool.scad
|
Screws.scad is now included in core.scad, so doesn't need to be included
|
2020-02-29 17:52:36 +00:00 |
|
spools.scad
|
Added another spool size
|
2019-10-22 15:27:49 +01:00 |
|
spring.scad
|
Screws.scad is now included in core.scad, so doesn't need to be included
|
2020-02-29 17:52:36 +00:00 |
|
springs.scad
|
Added source code
|
2019-06-08 22:10:47 +01:00 |
|
ssr.scad
|
Removed the height parameter from linear_extrude
|
2020-03-29 20:18:57 +01:00 |
|
ssrs.scad
|
Added source code
|
2019-06-08 22:10:47 +01:00 |
|
stepper_motor.scad
|
Made the ground surfaces of steppers lighter.
|
2020-04-02 19:54:30 +01:00 |
|
stepper_motors.scad
|
Added screw threads to most things that are threaded.
|
2020-02-22 19:44:01 +00:00 |
|
swiss_clip.scad
|
Added Swiss clip.
|
2020-04-16 00:59:27 +01:00 |
|
swiss_clips.scad
|
Added Swiss clip.
|
2020-04-16 00:59:27 +01:00 |
|
toggle.scad
|
Removed the height parameter from linear_extrude
|
2020-03-29 20:18:57 +01:00 |
|
toggles.scad
|
Fixed toggle switch part number typo.
|
2019-08-18 12:27:41 +01:00 |
|
transformer.scad
|
Removed the height parameter from linear_extrude
|
2020-03-29 20:18:57 +01:00 |
|
transformers.scad
|
Added source code
|
2019-06-08 22:10:47 +01:00 |
|
tubing.scad
|
Removed the height parameter from linear_extrude
|
2020-03-29 20:18:57 +01:00 |
|
tubings.scad
|
Added source code
|
2019-06-08 22:10:47 +01:00 |
|
variac.scad
|
Removed the height parameter from linear_extrude
|
2020-03-29 20:18:57 +01:00 |
|
variacs.scad
|
Added source code
|
2019-06-08 22:10:47 +01:00 |
|
veroboard.scad
|
Some more stl_colours.
|
2020-04-06 15:02:50 +01:00 |
|
washer.scad
|
Some more stl_colours.
|
2020-04-06 15:02:50 +01:00 |
|
washers.scad
|
Added source code
|
2019-06-08 22:10:47 +01:00 |
|
wire.scad
|
Fixed some more colour spellings
|
2020-03-29 21:36:11 +01:00 |
|
ziptie.scad
|
Removed the height parameter from linear_extrude
|
2020-03-29 20:18:57 +01:00 |
|
zipties.scad
|
Fixed some more colour spellings
|
2020-03-29 21:36:11 +01:00 |
a74bf094aa