mirror of
https://github.com/DJSundog/NopSCADlib.git
synced 2024-11-27 01:03:51 -05:00
Added SMD 0805 LEDs.
This commit is contained in:
Chris Palmer
parent
d4402c6713
commit
192460c0fa
BIN
libtest.png
BIN
libtest.png
Binary file not shown.
|
Before Width: | Height: | Size: 787 KiB After Width: | Height: | Size: 787 KiB |
76
readme.md
76
readme.md
@ -24,23 +24,24 @@ See [usage](docs/usage.md) for requirements, installation instructions and a usa
|
||||
<tr><td> <a href = "#Belts">Belts</a> </td><td> <a href = "#LEDs">LEDs</a> </td><td> <a href = "#Rod">Rod</a> </td><td> <a href = "#Carriers">Carriers</a> </td><td> <a href = "#Fillet">Fillet</a> </td><td> <a href = "#Polyholes">Polyholes</a> </td></tr>
|
||||
<tr><td> <a href = "#Blowers">Blowers</a> </td><td> <a href = "#Leadnuts">Leadnuts</a> </td><td> <a href = "#SCS_bearing_blocks">SCS_bearing_blocks</a> </td><td> <a href = "#Corner_block">Corner_block</a> </td><td> <a href = "#Hanging_hole">Hanging_hole</a> </td><td> <a href = "#Rounded_rectangle">Rounded_rectangle</a> </td></tr>
|
||||
<tr><td> <a href = "#Bulldogs">Bulldogs</a> </td><td> <a href = "#Light_strips">Light_strips</a> </td><td> <a href = "#SK_brackets">SK_brackets</a> </td><td> <a href = "#Door_hinge">Door_hinge</a> </td><td> <a href = "#Layout">Layout</a> </td><td> <a href = "#Sphere">Sphere</a> </td></tr>
|
||||
<tr><td> <a href = "#Buttons">Buttons</a> </td><td> <a href = "#Linear_bearings">Linear_bearings</a> </td><td> <a href = "#SSRs">SSRs</a> </td><td> <a href = "#Door_latch">Door_latch</a> </td><td> <a href = "#Maths">Maths</a> </td><td> <a href = "#Teardrops">Teardrops</a> </td></tr>
|
||||
<tr><td> <a href = "#Cable_strips">Cable_strips</a> </td><td> <a href = "#Mains_sockets">Mains_sockets</a> </td><td> <a href = "#Screws">Screws</a> </td><td> <a href = "#Fan_guard">Fan_guard</a> </td><td> <a href = "#Offset">Offset</a> </td><td></td></tr>
|
||||
<tr><td> <a href = "#Circlips">Circlips</a> </td><td> <a href = "#Meter">Meter</a> </td><td> <a href = "#Sealing_strip">Sealing_strip</a> </td><td> <a href = "#Fixing_block">Fixing_block</a> </td><td> <a href = "#Quadrant">Quadrant</a> </td><td></td></tr>
|
||||
<tr><td> <a href = "#Components">Components</a> </td><td> <a href = "#Microswitches">Microswitches</a> </td><td> <a href = "#Sheets">Sheets</a> </td><td> <a href = "#Flat_hinge">Flat_hinge</a> </td><td> <a href = "#Round">Round</a> </td><td></td></tr>
|
||||
<tr><td> <a href = "#DIP">DIP</a> </td><td> <a href = "#Microview">Microview</a> </td><td> <a href = "#Spades">Spades</a> </td><td> <a href = "#Foot">Foot</a> </td><td> <a href = "#Rounded_cylinder">Rounded_cylinder</a> </td><td></td></tr>
|
||||
<tr><td> <a href = "#D_connectors">D_connectors</a> </td><td> <a href = "#Modules">Modules</a> </td><td> <a href = "#Spools">Spools</a> </td><td> <a href = "#Handle">Handle</a> </td><td> <a href = "#Rounded_polygon">Rounded_polygon</a> </td><td></td></tr>
|
||||
<tr><td> <a href = "#Displays">Displays</a> </td><td> <a href = "#Nuts">Nuts</a> </td><td> <a href = "#Springs">Springs</a> </td><td> <a href = "#PCB_mount">PCB_mount</a> </td><td> <a href = "#Sector">Sector</a> </td><td></td></tr>
|
||||
<tr><td> <a href = "#Extrusion_brackets">Extrusion_brackets</a> </td><td> <a href = "#O_ring">O_ring</a> </td><td> <a href = "#Stepper_motors">Stepper_motors</a> </td><td> <a href = "#PSU_shroud">PSU_shroud</a> </td><td> <a href = "#Sweep">Sweep</a> </td><td></td></tr>
|
||||
<tr><td> <a href = "#Extrusions">Extrusions</a> </td><td> <a href = "#Opengrab">Opengrab</a> </td><td> <a href = "#Swiss_clips">Swiss_clips</a> </td><td> <a href = "#Printed_box">Printed_box</a> </td><td> <a href = "#Thread">Thread</a> </td><td></td></tr>
|
||||
<tr><td> <a href = "#Fans">Fans</a> </td><td> <a href = "#PCB">PCB</a> </td><td> <a href = "#Toggles">Toggles</a> </td><td> <a href = "#Ribbon_clamp">Ribbon_clamp</a> </td><td> <a href = "#Tube">Tube</a> </td><td></td></tr>
|
||||
<tr><td> <a href = "#Fuseholder">Fuseholder</a> </td><td> <a href = "#PCBs">PCBs</a> </td><td> <a href = "#Transformers">Transformers</a> </td><td> <a href = "#SSR_shroud">SSR_shroud</a> </td><td></td><td></td></tr>
|
||||
<tr><td> <a href = "#Geared_steppers">Geared_steppers</a> </td><td> <a href = "#PSUs">PSUs</a> </td><td> <a href = "#Tubings">Tubings</a> </td><td> <a href = "#Screw_knob">Screw_knob</a> </td><td></td><td></td></tr>
|
||||
<tr><td> <a href = "#Green_terminals">Green_terminals</a> </td><td> <a href = "#Pillars">Pillars</a> </td><td> <a href = "#Variacs">Variacs</a> </td><td> <a href = "#Socket_box">Socket_box</a> </td><td></td><td></td></tr>
|
||||
<tr><td> <a href = "#Hot_ends">Hot_ends</a> </td><td> <a href = "#Pin_headers">Pin_headers</a> </td><td> <a href = "#Veroboard">Veroboard</a> </td><td> <a href = "#Strap_handle">Strap_handle</a> </td><td></td><td></td></tr>
|
||||
<tr><td> <a href = "#Hygrometer">Hygrometer</a> </td><td> <a href = "#Pulleys">Pulleys</a> </td><td> <a href = "#Washers">Washers</a> </td><td></td><td></td><td></td></tr>
|
||||
<tr><td> <a href = "#IECs">IECs</a> </td><td></td><td> <a href = "#Wire">Wire</a> </td><td></td><td></td><td></td></tr>
|
||||
<tr><td> <a href = "#Inserts">Inserts</a> </td><td></td><td> <a href = "#Zipties">Zipties</a> </td><td></td><td></td><td></td></tr>
|
||||
<tr><td> <a href = "#Buttons">Buttons</a> </td><td> <a href = "#Linear_bearings">Linear_bearings</a> </td><td> <a href = "#SMDs">SMDs</a> </td><td> <a href = "#Door_latch">Door_latch</a> </td><td> <a href = "#Maths">Maths</a> </td><td> <a href = "#Teardrops">Teardrops</a> </td></tr>
|
||||
<tr><td> <a href = "#Cable_strips">Cable_strips</a> </td><td> <a href = "#Mains_sockets">Mains_sockets</a> </td><td> <a href = "#SSRs">SSRs</a> </td><td> <a href = "#Fan_guard">Fan_guard</a> </td><td> <a href = "#Offset">Offset</a> </td><td></td></tr>
|
||||
<tr><td> <a href = "#Circlips">Circlips</a> </td><td> <a href = "#Meter">Meter</a> </td><td> <a href = "#Screws">Screws</a> </td><td> <a href = "#Fixing_block">Fixing_block</a> </td><td> <a href = "#Quadrant">Quadrant</a> </td><td></td></tr>
|
||||
<tr><td> <a href = "#Components">Components</a> </td><td> <a href = "#Microswitches">Microswitches</a> </td><td> <a href = "#Sealing_strip">Sealing_strip</a> </td><td> <a href = "#Flat_hinge">Flat_hinge</a> </td><td> <a href = "#Round">Round</a> </td><td></td></tr>
|
||||
<tr><td> <a href = "#DIP">DIP</a> </td><td> <a href = "#Microview">Microview</a> </td><td> <a href = "#Sheets">Sheets</a> </td><td> <a href = "#Foot">Foot</a> </td><td> <a href = "#Rounded_cylinder">Rounded_cylinder</a> </td><td></td></tr>
|
||||
<tr><td> <a href = "#D_connectors">D_connectors</a> </td><td> <a href = "#Modules">Modules</a> </td><td> <a href = "#Spades">Spades</a> </td><td> <a href = "#Handle">Handle</a> </td><td> <a href = "#Rounded_polygon">Rounded_polygon</a> </td><td></td></tr>
|
||||
<tr><td> <a href = "#Displays">Displays</a> </td><td> <a href = "#Nuts">Nuts</a> </td><td> <a href = "#Spools">Spools</a> </td><td> <a href = "#PCB_mount">PCB_mount</a> </td><td> <a href = "#Sector">Sector</a> </td><td></td></tr>
|
||||
<tr><td> <a href = "#Extrusion_brackets">Extrusion_brackets</a> </td><td> <a href = "#O_ring">O_ring</a> </td><td> <a href = "#Springs">Springs</a> </td><td> <a href = "#PSU_shroud">PSU_shroud</a> </td><td> <a href = "#Sweep">Sweep</a> </td><td></td></tr>
|
||||
<tr><td> <a href = "#Extrusions">Extrusions</a> </td><td> <a href = "#Opengrab">Opengrab</a> </td><td> <a href = "#Stepper_motors">Stepper_motors</a> </td><td> <a href = "#Printed_box">Printed_box</a> </td><td> <a href = "#Thread">Thread</a> </td><td></td></tr>
|
||||
<tr><td> <a href = "#Fans">Fans</a> </td><td> <a href = "#PCB">PCB</a> </td><td> <a href = "#Swiss_clips">Swiss_clips</a> </td><td> <a href = "#Ribbon_clamp">Ribbon_clamp</a> </td><td> <a href = "#Tube">Tube</a> </td><td></td></tr>
|
||||
<tr><td> <a href = "#Fuseholder">Fuseholder</a> </td><td> <a href = "#PCBs">PCBs</a> </td><td> <a href = "#Toggles">Toggles</a> </td><td> <a href = "#SSR_shroud">SSR_shroud</a> </td><td></td><td></td></tr>
|
||||
<tr><td> <a href = "#Geared_steppers">Geared_steppers</a> </td><td> <a href = "#PSUs">PSUs</a> </td><td> <a href = "#Transformers">Transformers</a> </td><td> <a href = "#Screw_knob">Screw_knob</a> </td><td></td><td></td></tr>
|
||||
<tr><td> <a href = "#Green_terminals">Green_terminals</a> </td><td> <a href = "#Pillars">Pillars</a> </td><td> <a href = "#Tubings">Tubings</a> </td><td> <a href = "#Socket_box">Socket_box</a> </td><td></td><td></td></tr>
|
||||
<tr><td> <a href = "#Hot_ends">Hot_ends</a> </td><td> <a href = "#Pin_headers">Pin_headers</a> </td><td> <a href = "#Variacs">Variacs</a> </td><td> <a href = "#Strap_handle">Strap_handle</a> </td><td></td><td></td></tr>
|
||||
<tr><td> <a href = "#Hygrometer">Hygrometer</a> </td><td> <a href = "#Pulleys">Pulleys</a> </td><td> <a href = "#Veroboard">Veroboard</a> </td><td></td><td></td><td></td></tr>
|
||||
<tr><td> <a href = "#IECs">IECs</a> </td><td></td><td> <a href = "#Washers">Washers</a> </td><td></td><td></td><td></td></tr>
|
||||
<tr><td> <a href = "#Inserts">Inserts</a> </td><td></td><td> <a href = "#Wire">Wire</a> </td><td></td><td></td><td></td></tr>
|
||||
<tr><td></td><td></td><td> <a href = "#Zipties">Zipties</a> </td><td></td><td></td><td></td></tr>
|
||||
</table>
|
||||
|
||||
---
|
||||
@ -2053,6 +2054,7 @@ PCBs and perfboard with optional components. The shape can be a rectangle with o
|
||||
| 1 | ```ax_res(res1_4, 10000)``` | Resistor 10000 Ohms 5% 0.25W |
|
||||
| 1 | ```ax_res(res1_2, 100000)``` | Resistor 100000 Ohms 5% 0.5W |
|
||||
| 1 | ```ax_res(res1_8, 1e+6, tol = 1)``` | Resistor 1e+6 Ohms 1% 0.125W |
|
||||
| 1 | ```smd_led(LED0805, red)``` | SMD LED 0805 red |
|
||||
| 1 | ```square_button(button_6mm)``` | Square button 6mm |
|
||||
| 1 | ```pcb(TMC2130)``` | TMC2130 |
|
||||
| 1 | ```green_terminal(gt_5p08, 2)``` | Terminal block 2 way 0.2" |
|
||||
@ -2987,6 +2989,46 @@ SK shaft support brackets
|
||||
| 6 | ```washer(M5_washer)``` | Washer M5 x 10mm x 1mm |
|
||||
|
||||
|
||||
<a href="#top">Top</a>
|
||||
|
||||
---
|
||||
<a name="SMDs"></a>
|
||||
## SMDs
|
||||
Surface mount components for PCBs.
|
||||
|
||||
|
||||
[vitamins/smds.scad](vitamins/smds.scad) Object definitions.
|
||||
|
||||
[vitamins/smd.scad](vitamins/smd.scad) Implementation.
|
||||
|
||||
[tests/SMDs.scad](tests/SMDs.scad) Code for this example.
|
||||
|
||||
### Properties
|
||||
| Function | Description |
|
||||
|:--- |:--- |
|
||||
| ```smd_led_lens(type)``` | Lens length width and height |
|
||||
| ```smd_led_size(type)``` | Body length, width and height |
|
||||
|
||||
### Functions
|
||||
| Function | Description |
|
||||
|:--- |:--- |
|
||||
| ```smd_100th(x)``` | Convert dimesion to 1/100" notation |
|
||||
| ```smd_led_height(type)``` | Total height |
|
||||
| ```smd_size(size)``` | Convert size to 1/100" notation |
|
||||
|
||||
### Modules
|
||||
| Module | Description |
|
||||
|:--- |:--- |
|
||||
| ```smd_led(type, colour, cutout)``` | Draw an SMD LED with specified ```colour``` |
|
||||
|
||||
|
||||
|
||||
### Vitamins
|
||||
| Qty | Module call | BOM entry |
|
||||
| ---:|:--- |:---|
|
||||
| 1 | ```smd_led(LED0805, green)``` | SMD LED 0805 green |
|
||||
|
||||
|
||||
<a href="#top">Top</a>
|
||||
|
||||
---
|
||||
|
||||
@ -21,6 +21,7 @@ include <../vitamins/microswitches.scad>
|
||||
include <../vitamins/d_connectors.scad>
|
||||
include <../vitamins/leds.scad>
|
||||
include <../vitamins/axials.scad>
|
||||
include <../vitamins/smds.scad>
|
||||
|
||||
use <../vitamins/pcb.scad>
|
||||
|
||||
@ -58,7 +59,7 @@ test_pcb = ["TestPCB", "Test PCB",
|
||||
[
|
||||
[ 20, -5, 180, "trimpot10"],
|
||||
[ 20, -15, 0, "trimpot10", true],
|
||||
|
||||
[ 10, 2, 0, "smd_led", LED0805, "red"],
|
||||
[ 10, 10, 0, "2p54header", 4, 1],
|
||||
[ 25, 10, 0, "2p54header", 5, 1, undef, "blue" ],
|
||||
[ 10, 20, 0, "2p54boxhdr", 4, 2],
|
||||
|
||||
29
tests/SMDs.scad
Normal file
29
tests/SMDs.scad
Normal file
@ -0,0 +1,29 @@
|
||||
//
|
||||
// NopSCADlib Copyright Chris Palmer 2020
|
||||
// nop.head@gmail.com
|
||||
// hydraraptor.blogspot.com
|
||||
//
|
||||
// This file is part of NopSCADlib.
|
||||
//
|
||||
// NopSCADlib is free software: you can redistribute it and/or modify it under the terms of the
|
||||
// GNU General Public License as published by the Free Software Foundation, either version 3 of
|
||||
// the License, or (at your option) any later version.
|
||||
//
|
||||
// NopSCADlib is distributed in the hope that it will be useful, but WITHOUT ANY WARRANTY;
|
||||
// without even the implied warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.
|
||||
// See the GNU General Public License for more details.
|
||||
//
|
||||
// You should have received a copy of the GNU General Public License along with NopSCADlib.
|
||||
// If not, see <https://www.gnu.org/licenses/>.
|
||||
//
|
||||
include <../utils/core/core.scad>
|
||||
use <../utils/layout.scad>
|
||||
|
||||
include <../vitamins/smds.scad>
|
||||
|
||||
module smds()
|
||||
layout([for(l = smd_leds) smd_led_size(l).x], 1)
|
||||
smd_led(smd_leds[$i], ["green", "blue", "red"][$i % 3]);
|
||||
|
||||
if($preview)
|
||||
smds();
|
||||
Binary file not shown.
|
Before Width: | Height: | Size: 168 KiB After Width: | Height: | Size: 168 KiB |
Binary file not shown.
|
Before Width: | Height: | Size: 161 KiB After Width: | Height: | Size: 161 KiB |
BIN
tests/png/smds.png
Normal file
BIN
tests/png/smds.png
Normal file
Binary file not shown.
|
After Width: | Height: | Size: 52 KiB |
@ -36,6 +36,7 @@ use <d_connector.scad>
|
||||
use <led.scad>
|
||||
use <dip.scad>
|
||||
use <axial.scad>
|
||||
use <smd.scad>
|
||||
|
||||
function pcb_name(type) = type[1]; //! Description
|
||||
function pcb_length(type) = type[2]; //! Length
|
||||
@ -910,6 +911,7 @@ module pcb_component(comp, cutouts = false, angle = undef) { //! Draw pcb compon
|
||||
if(show(comp, "pdip")) pdip(comp[4], comp[5], param(6, false), param(7, inch(0.3)));
|
||||
if(show(comp, "ax_res")) ax_res(comp[4], comp[5], param(6, 5), param(7, 0));
|
||||
if(show(comp, "molex_usb_Ax2")) molex_usb_Ax2(cutouts);
|
||||
if(show(comp, "smd_led")) smd_led(comp[4], comp[5], cutouts);
|
||||
}
|
||||
}
|
||||
|
||||
|
||||
@ -20,6 +20,7 @@ include <microswitches.scad>
|
||||
include <d_connectors.scad>
|
||||
include <leds.scad>
|
||||
include <axials.scad>
|
||||
include <smds.scad>
|
||||
|
||||
//
|
||||
// l w t r h l c b h
|
||||
@ -348,6 +349,8 @@ MT3608 = ["MT3608", "MT3608 boost converter module", 37, 17, 1.2, 2, 1.5,
|
||||
TP4056 = ["TP4056", "TP4056 Li-lon Battery charger module", 26.2, 17.5, 1.0, 0, 1.0, [2.4, 2.4], "#2140BE", false,
|
||||
[[1.67, 1.8], [1.67, -1.8], [-1.67, 1.8], [-1.67, -1.8], [-1.67, -4.98], [-1.67, 4.98]],
|
||||
[ [ 2, 17.5 / 2, 180, "usb_uA"],
|
||||
[ 7, -2 , 0, "smd_led", LED0805, "red"],
|
||||
[ 11, -2 , 0, "smd_led", LED0805, "blue"],
|
||||
|
||||
]];
|
||||
|
||||
@ -358,6 +361,8 @@ WD2002SJ = ["WD2002SJ", "WD2002SJ Buck Boost DC-DC converter", 78, 47, 1.6, 0, 3
|
||||
[ -25.5, 3.1, 0, "trimpot10", true],
|
||||
[ 30.5, 3.1, 0, "trimpot10", true],
|
||||
[ 41.5, 3.1, 0, "trimpot10", true],
|
||||
[ -10.5, 1.5, 0, "smd_led", LED0805, "blue"],
|
||||
[ 16, 1.8, 0, "smd_led", LED0805, "red"],
|
||||
],
|
||||
[]];
|
||||
|
||||
|
||||
80
vitamins/smd.scad
Normal file
80
vitamins/smd.scad
Normal file
@ -0,0 +1,80 @@
|
||||
//
|
||||
// NopSCADlib Copyright Chris Palmer 2020
|
||||
// nop.head@gmail.com
|
||||
// hydraraptor.blogspot.com
|
||||
//
|
||||
// This file is part of NopSCADlib.
|
||||
//
|
||||
// NopSCADlib is free software: you can redistribute it and/or modify it under the terms of the
|
||||
// GNU General Public License as published by the Free Software Foundation, either version 3 of
|
||||
// the License, or (at your option) any later version.
|
||||
//
|
||||
// NopSCADlib is distributed in the hope that it will be useful, but WITHOUT ANY WARRANTY;
|
||||
// without even the implied warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.
|
||||
// See the GNU General Public License for more details.
|
||||
//
|
||||
// You should have received a copy of the GNU General Public License along with NopSCADlib.
|
||||
// If not, see <https://www.gnu.org/licenses/>.
|
||||
//
|
||||
|
||||
//
|
||||
//! Surface mount components for PCBs.
|
||||
//
|
||||
include <../utils/core/core.scad>
|
||||
|
||||
use <../utils/tube.scad>
|
||||
|
||||
function smd_led_size(type) = type[1]; //! Body length, width and height
|
||||
function smd_led_lens(type) = type[2]; //! Lens length width and height
|
||||
function smd_led_height(type) = //! Total height
|
||||
smd_led_size(type).z + smd_led_lens(type).z;
|
||||
|
||||
function smd_100th(x) = //! Convert dimesion to 1/100" notation
|
||||
let(s = str(round(x / inch(0.01))))
|
||||
len(s) < 2 ? str("0", s) : s;
|
||||
|
||||
function smd_size(size) = //! Convert size to 1/100" notation
|
||||
str(smd_100th(size.x), smd_100th(size.y));
|
||||
|
||||
module smd_led(type, colour, cutout) { //! Draw an SMD LED with specified ```colour```
|
||||
size = smd_led_size(type);
|
||||
vitamin(str("smd_led(", type[0], ", ", colour, "): SMD LED ", smd_size(size), " ", colour));
|
||||
|
||||
lens = smd_led_lens(type);
|
||||
r = size.y * 0.32;
|
||||
$fn = 32;
|
||||
|
||||
if(cutout)
|
||||
cylinder(d = 2.85, h = 100); // For lightguide made from transparent PLA filament
|
||||
else {
|
||||
color("white")
|
||||
linear_extrude(size.z)
|
||||
difference() {
|
||||
square([size.x, size.y], center = true);
|
||||
|
||||
for(end = [-1, 1])
|
||||
translate([end * size.x / 2, 0])
|
||||
circle(r);
|
||||
}
|
||||
|
||||
color(gold)
|
||||
linear_extrude(size.z)
|
||||
intersection() {
|
||||
square([size.x, size.y], center = true);
|
||||
|
||||
for(end = [-1, 1])
|
||||
translate([end * size.x / 2, 0])
|
||||
ring(or = r, ir = r / 2);
|
||||
}
|
||||
|
||||
color(colour, 0.9)
|
||||
translate_z(size.z)
|
||||
hull() {
|
||||
cube([lens.x, lens.y, eps], center = true);
|
||||
|
||||
slant = lens.z * tan(15);
|
||||
translate_z(lens.z / 2)
|
||||
cube([lens.x - slant, lens.y - slant, lens.z], center = true);
|
||||
}
|
||||
}
|
||||
}
|
||||
28
vitamins/smds.scad
Normal file
28
vitamins/smds.scad
Normal file
@ -0,0 +1,28 @@
|
||||
//
|
||||
// NopSCADlib Copyright Chris Palmer 2020
|
||||
// nop.head@gmail.com
|
||||
// hydraraptor.blogspot.com
|
||||
//
|
||||
// This file is part of NopSCADlib.
|
||||
//
|
||||
// NopSCADlib is free software: you can redistribute it and/or modify it under the terms of the
|
||||
// GNU General Public License as published by the Free Software Foundation, either version 3 of
|
||||
// the License, or (at your option) any later version.
|
||||
//
|
||||
// NopSCADlib is distributed in the hope that it will be useful, but WITHOUT ANY WARRANTY;
|
||||
// without even the implied warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.
|
||||
// See the GNU General Public License for more details.
|
||||
//
|
||||
// You should have received a copy of the GNU General Public License along with NopSCADlib.
|
||||
// If not, see <https://www.gnu.org/licenses/>.
|
||||
//
|
||||
|
||||
//
|
||||
//! Axial components
|
||||
//
|
||||
|
||||
LED0805 = ["LED0805", [2, 1.25, 0.46], [1.4, 1.25, 0.54]];
|
||||
|
||||
smd_leds = [LED0805];
|
||||
|
||||
use <smd.scad>
|
||||
Loading…
Reference in New Issue
Block a user