| .. |
|
microview
|
Added source code
|
2019-06-08 22:10:47 +01:00 |
|
axial.scad
|
Can now put wire links on PCBs
|
2020-09-06 12:31:41 +01:00 |
|
axials.scad
|
Added axial PCB mounted resistors.
|
2020-04-14 18:09:58 +01:00 |
|
ball_bearing.scad
|
Fixed ball bearing chamfers.
|
2020-07-31 01:33:33 +01:00 |
|
ball_bearings.scad
|
Added SMR95 ball bearing
|
2020-07-04 17:30:26 +01:00 |
|
batteries.scad
|
Screws.scad is now included in core.scad, so doesn't need to be included
|
2020-02-29 17:52:36 +00:00 |
|
battery.scad
|
Removed the height parameter from linear_extrude
|
2020-03-29 20:18:57 +01:00 |
|
belt.scad
|
Allow user to set y size of belt gap.
|
2020-11-16 07:36:34 +00:00 |
|
belts.scad
|
Added source code
|
2019-06-08 22:10:47 +01:00 |
|
blower.scad
|
Tweaks to make interface consistent with blowers.
|
2020-11-18 11:31:40 +00:00 |
|
blowers.scad
|
Whitespace fixes.
|
2020-12-13 10:29:54 +00:00 |
|
bulldog.scad
|
Screws.scad is now included in core.scad, so doesn't need to be included
|
2020-02-29 17:52:36 +00:00 |
|
bulldogs.scad
|
Added source code
|
2019-06-08 22:10:47 +01:00 |
|
button.scad
|
Replaced grey constants with a function grey().
|
2020-06-20 10:17:29 +01:00 |
|
buttons.scad
|
Added source code
|
2019-06-08 22:10:47 +01:00 |
|
cable_strip.scad
|
More spelling
|
2020-11-04 19:50:35 +00:00 |
|
camera.scad
|
Added facility to display camera without lens.
|
2020-11-21 20:45:39 +00:00 |
|
cameras.scad
|
Added printed camera housings.
|
2020-11-13 22:43:55 +00:00 |
|
circlip.scad
|
Replaced grey constants with a function grey().
|
2020-06-20 10:17:29 +01:00 |
|
circlips.scad
|
Added circlips.
|
2020-03-24 17:22:32 +00:00 |
|
component.scad
|
Fixes for lazy union.
|
2020-10-05 10:42:13 +01:00 |
|
components.scad
|
Added source code
|
2019-06-08 22:10:47 +01:00 |
|
d_connector.scad
|
Replaced grey constants with a function grey().
|
2020-06-20 10:17:29 +01:00 |
|
d_connectors.scad
|
Added source code
|
2019-06-08 22:10:47 +01:00 |
|
dip.scad
|
Replaced grey constants with a function grey().
|
2020-06-20 10:17:29 +01:00 |
|
display.scad
|
Screws.scad is now included in core.scad, so doesn't need to be included
|
2020-02-29 17:52:36 +00:00 |
|
displays.scad
|
Changed the order to avoid a clash with fans.
|
2020-11-14 14:32:23 +00:00 |
|
e3d.scad
|
Colours passed to thread need to be numeric, not strings.
|
2020-11-13 17:51:30 +00:00 |
|
extrusion.scad
|
Replaced grey constants with a function grey().
|
2020-06-20 10:17:29 +01:00 |
|
extrusion_bracket.scad
|
Screws.scad is now included in core.scad, so doesn't need to be included
|
2020-02-29 17:52:36 +00:00 |
|
extrusion_brackets.scad
|
Naming update.
|
2020-02-25 22:23:44 +00:00 |
|
extrusions.scad
|
Added E1515 extrusion.
|
2020-03-02 18:51:27 +00:00 |
|
fan.scad
|
Replaced grey constants with a function grey().
|
2020-06-20 10:17:29 +01:00 |
|
fans.scad
|
25mm fans are actually 25.4, i.e. 1".
|
2020-09-06 11:55:58 +01:00 |
|
fuseholder.scad
|
Replaced grey constants with a function grey().
|
2020-06-20 10:17:29 +01:00 |
|
geared_stepper.scad
|
Removed the height parameter from linear_extrude
|
2020-03-29 20:18:57 +01:00 |
|
geared_steppers.scad
|
Added small geared stepper and driver board.
|
2019-08-18 11:46:33 +01:00 |
|
green_terminal.scad
|
Added yet another type of green terminal that is blue.
|
2020-04-08 19:38:52 +01:00 |
|
green_terminals.scad
|
Added yet another type of green terminal that is blue.
|
2020-04-08 19:38:52 +01:00 |
|
hot_end.scad
|
Add optional bowden connector to E3D hotends.
|
2020-11-13 10:21:38 +00:00 |
|
hot_ends.scad
|
Spacing
|
2020-09-06 11:56:55 +01:00 |
|
hygrometer.scad
|
Replaced grey constants with a function grey().
|
2020-06-20 10:17:29 +01:00 |
|
iec.scad
|
Replaced grey constants with a function grey().
|
2020-06-20 10:17:29 +01:00 |
|
iecs.scad
|
Screws.scad is now included in core.scad, so doesn't need to be included
|
2020-02-29 17:52:36 +00:00 |
|
insert.scad
|
Fixed use of intersection with conditional argument to suit new OpenSCAD behaviour.
|
2020-10-03 15:53:41 +01:00 |
|
inserts.scad
|
Whitespace fixes.
|
2020-12-13 10:29:54 +00:00 |
|
jack.scad
|
Removed the height parameter from linear_extrude
|
2020-03-29 20:18:57 +01:00 |
|
jhead.scad
|
Fixed use of intersection with conditional argument to suit new OpenSCAD behaviour.
|
2020-10-03 15:53:41 +01:00 |
|
kp_pillow_block.scad
|
Replaced grey constants with a function grey().
|
2020-06-20 10:17:29 +01:00 |
|
kp_pillow_blocks.scad
|
Screws.scad is now included in core.scad, so doesn't need to be included
|
2020-02-29 17:52:36 +00:00 |
|
ldr.scad
|
Removed the height parameter from linear_extrude
|
2020-03-29 20:18:57 +01:00 |
|
ldrs.scad
|
LDRs thicker
|
2019-07-29 16:39:09 +01:00 |
|
leadnut.scad
|
Removed the height parameter from linear_extrude
|
2020-03-29 20:18:57 +01:00 |
|
leadnuts.scad
|
Added screw threads to most things that are threaded.
|
2020-02-22 19:44:01 +00:00 |
|
led.scad
|
LEDs can now be placed on PCBs.
|
2020-04-10 12:41:05 +01:00 |
|
led_meter.scad
|
Can now put wire links on PCBs
|
2020-09-06 12:31:41 +01:00 |
|
led_meters.scad
|
led_ammeter size tweaks.
|
2020-04-25 19:38:43 +01:00 |
|
leds.scad
|
Change LED.scad to led.scad
|
2019-06-25 10:35:41 +02:00 |
|
light_strip.scad
|
Added light_strip_clip_wall().
|
2020-06-24 16:42:17 +01:00 |
|
light_strips.scad
|
Tweaked lightstrip dimensions.
|
2020-06-21 20:35:13 +01:00 |
|
linear_bearing.scad
|
Replaced grey constants with a function grey().
|
2020-06-20 10:17:29 +01:00 |
|
linear_bearings.scad
|
Updated readme and images for linear_bearings change.
|
2020-01-11 08:57:33 +00:00 |
|
magnet.scad
|
Added magnets
|
2020-08-23 16:46:29 +01:00 |
|
magnets.scad
|
Added magnets
|
2020-08-23 16:46:29 +01:00 |
|
mains_socket.scad
|
Fixed countersink shape.
|
2020-12-10 23:27:27 +00:00 |
|
mains_sockets.scad
|
Added source code
|
2019-06-08 22:10:47 +01:00 |
|
microswitch.scad
|
Colour now always spelt colour except the call to color().
|
2020-03-29 20:39:17 +01:00 |
|
microswitches.scad
|
Replaced grey constants with a function grey().
|
2020-06-20 10:17:29 +01:00 |
|
microview.scad
|
Removed the height parameter from linear_extrude
|
2020-03-29 20:18:57 +01:00 |
|
module.scad
|
Replaced grey constants with a function grey().
|
2020-06-20 10:17:29 +01:00 |
|
modules.scad
|
Added source code
|
2019-06-08 22:10:47 +01:00 |
|
nut.scad
|
Replaced grey constants with a function grey().
|
2020-06-20 10:17:29 +01:00 |
|
nuts.scad
|
Nuts can now have non-standard pitch, toggle switch nut pitch fixed.
|
2020-03-24 17:29:29 +00:00 |
|
o_ring.scad
|
Screws.scad is now included in core.scad, so doesn't need to be included
|
2020-02-29 17:52:36 +00:00 |
|
opengrab.scad
|
Added PCB components to OpenGrab and functions to access PCB.
|
2020-09-11 12:35:22 +01:00 |
|
panel_meter.scad
|
Fixes for additional warnings in OpenSCAD 2020.09.12.ci5914
|
2020-09-14 22:54:55 +01:00 |
|
panel_meters.scad
|
Added JST PH connectors.
|
2020-11-12 23:34:59 +00:00 |
|
pcb.scad
|
PCBs now drawn before components so that transparent LEDs draw correctly.
|
2020-11-13 09:24:15 +00:00 |
|
pcbs.scad
|
Added JST PH connectors.
|
2020-11-12 23:34:59 +00:00 |
|
pillar.scad
|
Removed the height parameter from linear_extrude
|
2020-03-29 20:18:57 +01:00 |
|
pillars.scad
|
Replaced grey constants with a function grey().
|
2020-06-20 10:17:29 +01:00 |
|
pin_header.scad
|
Added JST PH connectors.
|
2020-11-12 23:34:59 +00:00 |
|
pin_headers.scad
|
Added JST PH connectors.
|
2020-11-12 23:34:59 +00:00 |
|
psu.scad
|
Replaced grey constants with a function grey().
|
2020-06-20 10:17:29 +01:00 |
|
psus.scad
|
Changed PSU list order to get all the shrouds together.
|
2020-02-29 08:55:40 +00:00 |
|
pulley.scad
|
Removed the height parameter from linear_extrude
|
2020-03-29 20:18:57 +01:00 |
|
pulleys.scad
|
Made small idler pulley 6.5mm by default and added a 7mm one.
|
2020-11-13 13:55:15 +00:00 |
|
rail.scad
|
Fixed bug in rail screw placement when putting screws in the middle.
|
2020-11-26 14:24:46 +00:00 |
|
rails.scad
|
Fixed MGN5 rail hole dimension.
|
2020-12-11 08:39:28 +00:00 |
|
ring_terminal.scad
|
Removed the height parameter from linear_extrude
|
2020-03-29 20:18:57 +01:00 |
|
ring_terminals.scad
|
Added crimp version of ring terminal.
|
2019-10-22 16:12:58 +01:00 |
|
rocker.scad
|
Replaced grey constants with a function grey().
|
2020-06-20 10:17:29 +01:00 |
|
rockers.scad
|
Added source code
|
2019-06-08 22:10:47 +01:00 |
|
rod.scad
|
Replaced grey constants with a function grey().
|
2020-06-20 10:17:29 +01:00 |
|
screw.scad
|
screw_polysink now has an alternating layer option to be more printable inverted.
|
2020-12-16 20:53:04 +00:00 |
|
screws.scad
|
screw_polysink now has an alternating layer option to be more printable inverted.
|
2020-12-16 20:53:04 +00:00 |
|
scs_bearing_block.scad
|
Replaced grey constants with a function grey().
|
2020-06-20 10:17:29 +01:00 |
|
scs_bearing_blocks.scad
|
Fixed long SCS_bearing blocks to use two short bearings and added circlips.
|
2020-03-24 17:24:08 +00:00 |
|
sealing_strip.scad
|
Removed the height parameter from linear_extrude
|
2020-03-29 20:18:57 +01:00 |
|
shaft_coupling.scad
|
Used tube.scad to shorten code.
|
2020-11-13 18:55:26 +00:00 |
|
shaft_couplings.scad
|
type[0] should be the name of the constant.
|
2020-11-13 19:30:46 +00:00 |
|
sheet.scad
|
Renders of dxfs now use the sheet colour.
|
2020-04-07 22:07:28 +01:00 |
|
sheets.scad
|
DiBond6 sheet now grey.
|
2020-11-29 10:39:35 +00:00 |
|
sk_bracket.scad
|
Replaced grey constants with a function grey().
|
2020-06-20 10:17:29 +01:00 |
|
sk_brackets.scad
|
Screws.scad is now included in core.scad, so doesn't need to be included
|
2020-02-29 17:52:36 +00:00 |
|
smd.scad
|
Fixes for lazy union.
|
2020-10-05 10:42:13 +01:00 |
|
smds.scad
|
Added SMT resistors and 0603 LED.
|
2020-06-27 19:59:49 +01:00 |
|
spade.scad
|
Removed the height parameter from linear_extrude
|
2020-03-29 20:18:57 +01:00 |
|
spades.scad
|
IEC mains connector models more accurate.
|
2019-06-20 11:59:13 +01:00 |
|
spool.scad
|
Screws.scad is now included in core.scad, so doesn't need to be included
|
2020-02-29 17:52:36 +00:00 |
|
spools.scad
|
Added another spool size
|
2019-10-22 15:27:49 +01:00 |
|
spring.scad
|
Screws.scad is now included in core.scad, so doesn't need to be included
|
2020-02-29 17:52:36 +00:00 |
|
springs.scad
|
Added source code
|
2019-06-08 22:10:47 +01:00 |
|
ssr.scad
|
Removed the height parameter from linear_extrude
|
2020-03-29 20:18:57 +01:00 |
|
ssrs.scad
|
Added source code
|
2019-06-08 22:10:47 +01:00 |
|
stepper_motor.scad
|
Made stepper motor encap paramatric.
|
2020-11-12 23:36:35 +00:00 |
|
stepper_motors.scad
|
Made stepper motor encap paramatric.
|
2020-11-12 23:36:35 +00:00 |
|
swiss_clip.scad
|
Added Swiss clip.
|
2020-04-16 00:59:27 +01:00 |
|
swiss_clips.scad
|
Added Swiss clip.
|
2020-04-16 00:59:27 +01:00 |
|
toggle.scad
|
Removed the height parameter from linear_extrude
|
2020-03-29 20:18:57 +01:00 |
|
toggles.scad
|
Fixed toggle switch part number typo.
|
2019-08-18 12:27:41 +01:00 |
|
transformer.scad
|
Removed the height parameter from linear_extrude
|
2020-03-29 20:18:57 +01:00 |
|
transformers.scad
|
Added source code
|
2019-06-08 22:10:47 +01:00 |
|
tubing.scad
|
Fix to centering of carbon fiber tubing.
|
2020-11-13 19:27:02 +00:00 |
|
tubings.scad
|
Added carbon fiber tubing with woven pattern.
|
2020-11-13 09:35:56 +00:00 |
|
variac.scad
|
Removed the height parameter from linear_extrude
|
2020-03-29 20:18:57 +01:00 |
|
variacs.scad
|
Added source code
|
2019-06-08 22:10:47 +01:00 |
|
veroboard.scad
|
Verboard can now have components on the underside, same as PCBs.
|
2020-09-06 12:32:42 +01:00 |
|
washer.scad
|
Replaced grey constants with a function grey().
|
2020-06-20 10:17:29 +01:00 |
|
washers.scad
|
Added source code
|
2019-06-08 22:10:47 +01:00 |
|
wire.scad
|
Changed some teardrop holes to teardrop plus.
|
2020-07-20 20:39:01 +01:00 |
|
ziptie.scad
|
Removed the height parameter from linear_extrude
|
2020-03-29 20:18:57 +01:00 |
|
zipties.scad
|
Fixed some more colour spellings
|
2020-03-29 21:36:11 +01:00 |
157ff60e19