Added magnets

This commit is contained in:
Chris Palmer 2020-08-23 16:46:29 +01:00
parent 362dbdb4fc
commit 1eb8b378e9
8 changed files with 161 additions and 17 deletions

View File

@ -43,6 +43,7 @@ include <vitamins/ldrs.scad>
include <vitamins/leadnuts.scad>
include <vitamins/led_meter.scad>
include <vitamins/light_strips.scad>
include <vitamins/magnets.scad>
include <vitamins/mains_sockets.scad>
include <vitamins/modules.scad>
include <vitamins/panel_meters.scad>

Binary file not shown.

Before

Width:  |  Height:  |  Size: 816 KiB

After

Width:  |  Height:  |  Size: 817 KiB

View File

@ -50,6 +50,7 @@ use <tests/LEDs.scad>
use <tests/light_strips.scad>
use <tests/linear_bearings.scad>
use <tests/LED_meters.scad>
use <tests/magnets.scad>
use <tests/microswitches.scad>
use <tests/modules.scad>
use <tests/nuts.scad>
@ -271,8 +272,9 @@ translate([x1, leadnuts_y])
leds_y = 0;
carriers_y = leds_y + 40;
spades_y = carriers_y + 40;
buttons_y = spades_y + 40;
magnets_y = carriers_y + 40;
spades_y = magnets_y + 20;
buttons_y = spades_y + 20;
jacks_y = buttons_y + 40;
microswitches_y = jacks_y + 40;
rockers_y = microswitches_y + 40;
@ -288,6 +290,9 @@ translate([x2 + 35, leds_y])
translate([x2 + 8, carriers_y])
carriers();
translate([x2, magnets_y])
magnets();
translate([x2 + 20, carriers_y])
led_meters();

View File

@ -26,21 +26,21 @@ See [usage](docs/usage.md) for requirements, installation instructions and a usa
<tr><td> <a href = "#Bulldogs">Bulldogs</a> </td><td> <a href = "#Leadnuts">Leadnuts</a> </td><td> <a href = "#SK_brackets">SK_brackets</a> </td><td> <a href = "#Door_hinge">Door_hinge</a> </td><td> <a href = "#Hanging_hole">Hanging_hole</a> </td><td> <a href = "#Sphere">Sphere</a> </td></tr>
<tr><td> <a href = "#Buttons">Buttons</a> </td><td> <a href = "#Light_strips">Light_strips</a> </td><td> <a href = "#SMDs">SMDs</a> </td><td> <a href = "#Door_latch">Door_latch</a> </td><td> <a href = "#Horiholes">Horiholes</a> </td><td> <a href = "#Teardrops">Teardrops</a> </td></tr>
<tr><td> <a href = "#Cable_strips">Cable_strips</a> </td><td> <a href = "#Linear_bearings">Linear_bearings</a> </td><td> <a href = "#SSRs">SSRs</a> </td><td> <a href = "#Fan_guard">Fan_guard</a> </td><td> <a href = "#Layout">Layout</a> </td><td></td></tr>
<tr><td> <a href = "#Cameras">Cameras</a> </td><td> <a href = "#Mains_sockets">Mains_sockets</a> </td><td> <a href = "#Screws">Screws</a> </td><td> <a href = "#Fixing_block">Fixing_block</a> </td><td> <a href = "#Maths">Maths</a> </td><td></td></tr>
<tr><td> <a href = "#Circlips">Circlips</a> </td><td> <a href = "#Microswitches">Microswitches</a> </td><td> <a href = "#Sealing_strip">Sealing_strip</a> </td><td> <a href = "#Flat_hinge">Flat_hinge</a> </td><td> <a href = "#Offset">Offset</a> </td><td></td></tr>
<tr><td> <a href = "#Components">Components</a> </td><td> <a href = "#Microview">Microview</a> </td><td> <a href = "#Sheets">Sheets</a> </td><td> <a href = "#Foot">Foot</a> </td><td> <a href = "#Quadrant">Quadrant</a> </td><td></td></tr>
<tr><td> <a href = "#DIP">DIP</a> </td><td> <a href = "#Modules">Modules</a> </td><td> <a href = "#Spades">Spades</a> </td><td> <a href = "#Handle">Handle</a> </td><td> <a href = "#Round">Round</a> </td><td></td></tr>
<tr><td> <a href = "#D_connectors">D_connectors</a> </td><td> <a href = "#Nuts">Nuts</a> </td><td> <a href = "#Spools">Spools</a> </td><td> <a href = "#PCB_mount">PCB_mount</a> </td><td> <a href = "#Rounded_cylinder">Rounded_cylinder</a> </td><td></td></tr>
<tr><td> <a href = "#Displays">Displays</a> </td><td> <a href = "#O_ring">O_ring</a> </td><td> <a href = "#Springs">Springs</a> </td><td> <a href = "#PSU_shroud">PSU_shroud</a> </td><td> <a href = "#Rounded_polygon">Rounded_polygon</a> </td><td></td></tr>
<tr><td> <a href = "#Extrusion_brackets">Extrusion_brackets</a> </td><td> <a href = "#Opengrab">Opengrab</a> </td><td> <a href = "#Stepper_motors">Stepper_motors</a> </td><td> <a href = "#Printed_box">Printed_box</a> </td><td> <a href = "#Sector">Sector</a> </td><td></td></tr>
<tr><td> <a href = "#Extrusions">Extrusions</a> </td><td> <a href = "#PCB">PCB</a> </td><td> <a href = "#Swiss_clips">Swiss_clips</a> </td><td> <a href = "#Ribbon_clamp">Ribbon_clamp</a> </td><td> <a href = "#Sweep">Sweep</a> </td><td></td></tr>
<tr><td> <a href = "#Fans">Fans</a> </td><td> <a href = "#PCBs">PCBs</a> </td><td> <a href = "#Toggles">Toggles</a> </td><td> <a href = "#SSR_shroud">SSR_shroud</a> </td><td> <a href = "#Thread">Thread</a> </td><td></td></tr>
<tr><td> <a href = "#Fuseholder">Fuseholder</a> </td><td> <a href = "#PSUs">PSUs</a> </td><td> <a href = "#Transformers">Transformers</a> </td><td> <a href = "#Screw_knob">Screw_knob</a> </td><td> <a href = "#Tube">Tube</a> </td><td></td></tr>
<tr><td> <a href = "#Geared_steppers">Geared_steppers</a> </td><td> <a href = "#Panel_meters">Panel_meters</a> </td><td> <a href = "#Tubings">Tubings</a> </td><td> <a href = "#Socket_box">Socket_box</a> </td><td></td><td></td></tr>
<tr><td> <a href = "#Green_terminals">Green_terminals</a> </td><td> <a href = "#Pillars">Pillars</a> </td><td> <a href = "#Variacs">Variacs</a> </td><td> <a href = "#Strap_handle">Strap_handle</a> </td><td></td><td></td></tr>
<tr><td> <a href = "#Hot_ends">Hot_ends</a> </td><td> <a href = "#Pin_headers">Pin_headers</a> </td><td> <a href = "#Veroboard">Veroboard</a> </td><td></td><td></td><td></td></tr>
<tr><td> <a href = "#Hygrometer">Hygrometer</a> </td><td> <a href = "#Pulleys">Pulleys</a> </td><td> <a href = "#Washers">Washers</a> </td><td></td><td></td><td></td></tr>
<tr><td> <a href = "#IECs">IECs</a> </td><td></td><td> <a href = "#Wire">Wire</a> </td><td></td><td></td><td></td></tr>
<tr><td> <a href = "#Cameras">Cameras</a> </td><td> <a href = "#Magnets">Magnets</a> </td><td> <a href = "#Screws">Screws</a> </td><td> <a href = "#Fixing_block">Fixing_block</a> </td><td> <a href = "#Maths">Maths</a> </td><td></td></tr>
<tr><td> <a href = "#Circlips">Circlips</a> </td><td> <a href = "#Mains_sockets">Mains_sockets</a> </td><td> <a href = "#Sealing_strip">Sealing_strip</a> </td><td> <a href = "#Flat_hinge">Flat_hinge</a> </td><td> <a href = "#Offset">Offset</a> </td><td></td></tr>
<tr><td> <a href = "#Components">Components</a> </td><td> <a href = "#Microswitches">Microswitches</a> </td><td> <a href = "#Sheets">Sheets</a> </td><td> <a href = "#Foot">Foot</a> </td><td> <a href = "#Quadrant">Quadrant</a> </td><td></td></tr>
<tr><td> <a href = "#DIP">DIP</a> </td><td> <a href = "#Microview">Microview</a> </td><td> <a href = "#Spades">Spades</a> </td><td> <a href = "#Handle">Handle</a> </td><td> <a href = "#Round">Round</a> </td><td></td></tr>
<tr><td> <a href = "#D_connectors">D_connectors</a> </td><td> <a href = "#Modules">Modules</a> </td><td> <a href = "#Spools">Spools</a> </td><td> <a href = "#PCB_mount">PCB_mount</a> </td><td> <a href = "#Rounded_cylinder">Rounded_cylinder</a> </td><td></td></tr>
<tr><td> <a href = "#Displays">Displays</a> </td><td> <a href = "#Nuts">Nuts</a> </td><td> <a href = "#Springs">Springs</a> </td><td> <a href = "#PSU_shroud">PSU_shroud</a> </td><td> <a href = "#Rounded_polygon">Rounded_polygon</a> </td><td></td></tr>
<tr><td> <a href = "#Extrusion_brackets">Extrusion_brackets</a> </td><td> <a href = "#O_ring">O_ring</a> </td><td> <a href = "#Stepper_motors">Stepper_motors</a> </td><td> <a href = "#Printed_box">Printed_box</a> </td><td> <a href = "#Sector">Sector</a> </td><td></td></tr>
<tr><td> <a href = "#Extrusions">Extrusions</a> </td><td> <a href = "#Opengrab">Opengrab</a> </td><td> <a href = "#Swiss_clips">Swiss_clips</a> </td><td> <a href = "#Ribbon_clamp">Ribbon_clamp</a> </td><td> <a href = "#Sweep">Sweep</a> </td><td></td></tr>
<tr><td> <a href = "#Fans">Fans</a> </td><td> <a href = "#PCB">PCB</a> </td><td> <a href = "#Toggles">Toggles</a> </td><td> <a href = "#SSR_shroud">SSR_shroud</a> </td><td> <a href = "#Thread">Thread</a> </td><td></td></tr>
<tr><td> <a href = "#Fuseholder">Fuseholder</a> </td><td> <a href = "#PCBs">PCBs</a> </td><td> <a href = "#Transformers">Transformers</a> </td><td> <a href = "#Screw_knob">Screw_knob</a> </td><td> <a href = "#Tube">Tube</a> </td><td></td></tr>
<tr><td> <a href = "#Geared_steppers">Geared_steppers</a> </td><td> <a href = "#PSUs">PSUs</a> </td><td> <a href = "#Tubings">Tubings</a> </td><td> <a href = "#Socket_box">Socket_box</a> </td><td></td><td></td></tr>
<tr><td> <a href = "#Green_terminals">Green_terminals</a> </td><td> <a href = "#Panel_meters">Panel_meters</a> </td><td> <a href = "#Variacs">Variacs</a> </td><td> <a href = "#Strap_handle">Strap_handle</a> </td><td></td><td></td></tr>
<tr><td> <a href = "#Hot_ends">Hot_ends</a> </td><td> <a href = "#Pillars">Pillars</a> </td><td> <a href = "#Veroboard">Veroboard</a> </td><td></td><td></td><td></td></tr>
<tr><td> <a href = "#Hygrometer">Hygrometer</a> </td><td> <a href = "#Pin_headers">Pin_headers</a> </td><td> <a href = "#Washers">Washers</a> </td><td></td><td></td><td></td></tr>
<tr><td> <a href = "#IECs">IECs</a> </td><td> <a href = "#Pulleys">Pulleys</a> </td><td> <a href = "#Wire">Wire</a> </td><td></td><td></td><td></td></tr>
<tr><td> <a href = "#Inserts">Inserts</a> </td><td></td><td> <a href = "#Zipties">Zipties</a> </td><td></td><td></td><td></td></tr>
</table>
@ -1676,6 +1676,36 @@ LMnUU linear bearings.
| 1 | ```linear_bearing(LM8UU)``` | Linear bearing LM8UU |
<a href="#top">Top</a>
---
<a name="Magnets"></a>
## Magnets
Cylindrical and ring magnets.
[vitamins/magnets.scad](vitamins/magnets.scad) Object definitions.
[vitamins/magnet.scad](vitamins/magnet.scad) Implementation.
[tests/magnets.scad](tests/magnets.scad) Code for this example.
### Properties
| Function | Description |
|:--- |:--- |
| ```magnet_h(type)``` | Height |
| ```magnet_id(type)``` | Inside diameter if a ring |
| ```magnet_od(type)``` | Outer diameter |
| ```magnet_r(type)``` | Corner radius |
### Modules
| Module | Description |
|:--- |:--- |
| ```magnet(type)``` | Draw specified magnet |
![magnets](tests/png/magnets.png)
<a href="#top">Top</a>
---

29
tests/magnets.scad Normal file
View File

@ -0,0 +1,29 @@
//
// NopSCADlib Copyright Chris Palmer 2020
// nop.head@gmail.com
// hydraraptor.blogspot.com
//
// This file is part of NopSCADlib.
//
// NopSCADlib is free software: you can redistribute it and/or modify it under the terms of the
// GNU General Public License as published by the Free Software Foundation, either version 3 of
// the License, or (at your option) any later version.
//
// NopSCADlib is distributed in the hope that it will be useful, but WITHOUT ANY WARRANTY;
// without even the implied warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.
// See the GNU General Public License for more details.
//
// You should have received a copy of the GNU General Public License along with NopSCADlib.
// If not, see <https://www.gnu.org/licenses/>.
//
include <../core.scad>
use <../utils/layout.scad>
include <../vitamins/magnets.scad>
module magnets()
layout([for(m = magnets) magnet_od(m)], 5)
magnet(magnets[$i]);
if($preview)
magnets();

BIN
tests/png/magnets.png Normal file

Binary file not shown.

After

Width:  |  Height:  |  Size: 42 KiB

49
vitamins/magnet.scad Normal file
View File

@ -0,0 +1,49 @@
//
// NopSCADlib Copyright Chris Palmer 2020
// nop.head@gmail.com
// hydraraptor.blogspot.com
//
// This file is part of NopSCADlib.
//
// NopSCADlib is free software: you can redistribute it and/or modify it under the terms of the
// GNU General Public License as published by the Free Software Foundation, either version 3 of
// the License, or (at your option) any later version.
//
// NopSCADlib is distributed in the hope that it will be useful, but WITHOUT ANY WARRANTY;
// without even the implied warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.
// See the GNU General Public License for more details.
//
// You should have received a copy of the GNU General Public License along with NopSCADlib.
// If not, see <https://www.gnu.org/licenses/>.
//
//
//! Cylindrical and ring magnets.
//
include <../utils/core/core.scad>
function magnet_od(type) = type[1]; //! Outer diameter
function magnet_id(type) = type[2]; //! Inside diameter if a ring
function magnet_h(type) = type[3]; //! Height
function magnet_r(type) = type[4]; //! Corner radius
module magnet(type) { //! Draw specified magnet
od = magnet_od(type);
id = magnet_id(type);
h = magnet_h(type);
r = magnet_r(type);
//vitamin(str("magnet(", type[0], "): Magnet ", od, "mm diameter, ", h, "mm high", id ? str(", ", id, "mm bore") : "" ));
or = od / 2;
ir = id / 2;
color(silver)
rotate_extrude()
union() {
translate([ir, 0])
rounded_square([or - ir, h], r, center = false);
if(!ir)
square([r, h]);
}
}

30
vitamins/magnets.scad Normal file
View File

@ -0,0 +1,30 @@
//
// NopSCADlib Copyright Chris Palmer 2020
// nop.head@gmail.com
// hydraraptor.blogspot.com
//
// This file is part of NopSCADlib.
//
// NopSCADlib is free software: you can redistribute it and/or modify it under the terms of the
// GNU General Public License as published by the Free Software Foundation, either version 3 of
// the License, or (at your option) any later version.
//
// NopSCADlib is distributed in the hope that it will be useful, but WITHOUT ANY WARRANTY;
// without even the implied warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.
// See the GNU General Public License for more details.
//
// You should have received a copy of the GNU General Public License along with NopSCADlib.
// If not, see <https://www.gnu.org/licenses/>.
//
//
//! Cylindrical and ring magnets.
//
// od, id, h, r
MAG8x4x4p2 = ["MAG8x4x4p2", 8, 4.2, 4, 0.5];
MAG484 = ["MAG484", inch(1/4), inch(1/8), inch(1/4), 0.5];
MAG5x8 = ["MAG484", 8, 0, 5, 0.5];
magnets = [MAG8x4x4p2, MAG484, MAG5x8];
use <magnet.scad>