# Project Overview
This is my first pass at building myself a small, portable, decent sounding digital audio player based around a raspberry pi zero and some additional hardware along with a 3d printed case.

My goal is to build myself a music player I can carry as my primary listening device that sounds good, can carry a large portion of my music library, has a simple user interface, has a more powerful backend interface, and does not cost a fortune.

For this first iteration, I have selected three HATs - a display hat with d-pad and utility buttons, a digital audio board, and an uninterruptible power supply board with battery. The selections of the hardware chosen was based more on availability at the time of ordering than any in-depth research in to the pros and cons of each device amongst its peers. As it turns out, there are a few GPIO pin assignments that two or more of the HATs will be trying to use for their own devices (ha) so I'll have to bodge that wire when I get to it.

The other hardware consists of a raspberry pi zero w board, a 32gb micro sd card, a micro-usb to usb-a plug cable, and a 256gb usb flash drive. The flash drive will be the music library storage and will be externally accessibly, should I want to remove it to modify the library contents on a system with a faster storage bus going for it. also, I could carry around a tiny fake pleather cassette carrying case that had a couple dozen usb flash drives in it and have literally terabytes of high quality music at my disposable. tres chic!

# installation and dev log
*TODO*: clean up log entries, flesh out details for readers

*TODO*: add project goals, features, BoM, relevant links

*TODO*: set up repo directory structure

*TODO*: move all these todos into issues or something i dunno

## initial setup
wrote raspbian image to sd card

added empty file `/boot/ssh`

added file `/boot/wpa_supplicant.conf`:

```
country=US
ctrl_interface=DIR=/var/run/wpa_supplicant GROUP=netdev
update_config=1

network={
    ssid="WIFI_SSID"
    scan_ssid=1
    psk="WIFI_PASSWORD"
    key_mgmt=WPA-PSK
}
```

booted pi

logged in via ssh

changed passwd

`sudo raspi-config` 

- set up locale

- disable wait for network at boot

- resize filesystem in advanced

reboot

logged in via ssh

confirmed filesystem resize

`sudo apt update && sudo apt upgrade -y && sudo apt install tmux usbmount vim`

`sudo vim /etc/hostname`

changed to soundslab

shutdown -h now

## install and configure DAC hat
added hat to pi zero

booted pi

`sudo wget -O - script.raspiaudio.com | bash`

reboot

## install and configure display hat
https://www.waveshare.com/wiki/Libraries_Installation_for_RPi

## install and configure UPS hat

## install musikcube from github
https://github.com/clangen/musikcube/wiki/raspberry-pi

## install UI script from gitea
*TODO*: write this script!

## install startup scripts from gitea
*TODO*: write these scripts!

## reboot into soundslab!