diff --git a/docker/Almalinux.Dockerfile b/docker/Almalinux.Dockerfile
new file mode 100644
index 00000000..cb74752d
--- /dev/null
+++ b/docker/Almalinux.Dockerfile
@@ -0,0 +1,51 @@
+FROM    almalinux:9.1 AS base
+
+ENV container docker
+RUN     dnf -y install libgomp && \
+        dnf clean all;
+
+RUN (cd /lib/systemd/system/sysinit.target.wants/; for i in *; do [ $i == \
+systemd-tmpfiles-setup.service ] || rm -f $i; done); \
+rm -f /lib/systemd/system/multi-user.target.wants/*;\
+rm -f /etc/systemd/system/*.wants/*;\
+rm -f /lib/systemd/system/local-fs.target.wants/*; \
+rm -f /lib/systemd/system/sockets.target.wants/*udev*; \
+rm -f /lib/systemd/system/sockets.target.wants/*initctl*; \
+rm -f /lib/systemd/system/basic.target.wants/*;\
+rm -f /lib/systemd/system/anaconda.target.wants/*;
+
+
+
+FROM        base
+
+ARG FFPLAYOUT_VERSION=0.17.1
+
+ENV LD_LIBRARY_PATH=/usr/local/lib64:/usr/local/lib
+
+ADD ./overide.conf /etc/systemd/system/ffplayout.service.d/overide.conf
+
+
+RUN dnf install -y epel-release && \
+    dnf install -y 'dnf-command(config-manager)' && \
+    dnf config-manager --set-enabled crb && \
+    dnf install -y --nogpgcheck https://mirrors.rpmfusion.org/free/el/rpmfusion-free-release-$(rpm -E %rhel).noarch.rpm && \
+    dnf install -y --nogpgcheck https://mirrors.rpmfusion.org/nonfree/el/rpmfusion-nonfree-release-$(rpm -E %rhel).noarch.rpm && \
+    dnf install -y ffmpeg ffmpeg-devel
+
+RUN \
+    dnf update -y \
+    && dnf install -y wget dejavu-sans-fonts sudo \
+    && wget -q -O /tmp/ffplayout_${FFPLAYOUT_VERSION}.x86_64.rpm "https://github.com/ffplayout/ffplayout/releases/download/v${VERSION}/ffplayout-${FFPLAYOUT_VERSION}-1.x86_64.rpm" \
+    && yum install -y /tmp/ffplayout_${FFPLAYOUT_VERSION}.x86_64.rpm \
+    && dnf clean all \
+    && rm /tmp/ffplayout-${FFPLAYOUT_VERSION}.x86_64.rpm \
+    && mkdir -p /home/ffpu && chown -R ffpu: /home/ffpu \
+    && systemctl enable ffplayout \
+    && systemctl enable ffpapi \
+    && ffpapi -u admin -p admin -m contact@example.com
+
+EXPOSE 8787
+
+VOLUME [ "/sys/fs/cgroup" ]
+
+CMD ["/usr/sbin/init"]
\ No newline at end of file
diff --git a/docker/Dockerfile b/docker/Dockerfile
index 04bfd817..632c75cb 100644
--- a/docker/Dockerfile
+++ b/docker/Dockerfile
@@ -22,54 +22,15 @@ WORKDIR     /tmp/workdir
 
 ENV    FFMPEG_VERSION=5.1.2 \
     AOM_VERSION=v1.0.0 \
-    CHROMAPRINT_VERSION=1.5.0 \
-    FDKAAC_VERSION=0.1.5 \
-    FONTCONFIG_VERSION=2.12.4 \
+    LIBASS_VERSION=0.13.7 \
     FREETYPE_VERSION=2.10.4 \
     FRIBIDI_VERSION=0.19.7 \
-    KVAZAAR_VERSION=2.0.0 \
-    LAME_VERSION=3.100 \
-    LIBASS_VERSION=0.13.7 \
-    LIBPTHREAD_STUBS_VERSION=0.4 \
-    LIBVIDSTAB_VERSION=1.1.0 \
-    LIBXCB_VERSION=1.13.1 \
-    XCBPROTO_VERSION=1.13 \
-    OGG_VERSION=1.3.2 \
-    OPENCOREAMR_VERSION=0.1.5 \
-    OPUS_VERSION=1.2 \
-    OPENJPEG_VERSION=2.1.2 \
-    THEORA_VERSION=1.1.1 \
-    VORBIS_VERSION=1.3.5 \
-    VPX_VERSION=1.8.0 \
-    WEBP_VERSION=1.0.2 \
-    X264_VERSION=20170226-2245-stable \
-    X265_VERSION=3.4 \
-    XAU_VERSION=1.0.9 \
-    XORG_MACROS_VERSION=1.19.2 \
-    XPROTO_VERSION=7.0.31 \
-    XVID_VERSION=1.3.4 \
-    LIBXML2_VERSION=2.9.12 \
-    LIBBLURAY_VERSION=1.1.2 \
-    LIBZMQ_VERSION=4.3.2 \
-    LIBSRT_VERSION=1.4.1 \
-    LIBARIBB24_VERSION=1.0.3 \
-    LIBPNG_VERSION=1.6.9 \
-    LIBVMAF_VERSION=2.1.1 \
+    FONTCONFIG_VERSION=2.12.4 \
     SRC=/usr/local
 
+ARG         LIBASS_SHA256SUM="8fadf294bf701300d4605e6f1d92929304187fca4b8d8a47889315526adbafd7 0.13.7.tar.gz"
 ARG         FREETYPE_SHA256SUM="5eab795ebb23ac77001cfb68b7d4d50b5d6c7469247b0b01b2c953269f658dac freetype-2.10.4.tar.gz"
 ARG         FRIBIDI_SHA256SUM="3fc96fa9473bd31dcb5500bdf1aa78b337ba13eb8c301e7c28923fea982453a8 0.19.7.tar.gz"
-ARG         LIBASS_SHA256SUM="8fadf294bf701300d4605e6f1d92929304187fca4b8d8a47889315526adbafd7 0.13.7.tar.gz"
-ARG         LIBVIDSTAB_SHA256SUM="14d2a053e56edad4f397be0cb3ef8eb1ec3150404ce99a426c4eb641861dc0bb v1.1.0.tar.gz"
-ARG         OGG_SHA256SUM="e19ee34711d7af328cb26287f4137e70630e7261b17cbe3cd41011d73a654692 libogg-1.3.2.tar.gz"
-ARG         OPUS_SHA256SUM="77db45a87b51578fbc49555ef1b10926179861d854eb2613207dc79d9ec0a9a9 opus-1.2.tar.gz"
-ARG         THEORA_SHA256SUM="40952956c47811928d1e7922cda3bc1f427eb75680c3c37249c91e949054916b libtheora-1.1.1.tar.gz"
-ARG         VORBIS_SHA256SUM="6efbcecdd3e5dfbf090341b485da9d176eb250d893e3eb378c428a2db38301ce libvorbis-1.3.5.tar.gz"
-ARG         XVID_SHA256SUM="4e9fd62728885855bc5007fe1be58df42e5e274497591fec37249e1052ae316f xvidcore-1.3.4.tar.gz"
-ARG         LIBBLURAY_SHA256SUM="a3dd452239b100dc9da0d01b30e1692693e2a332a7d29917bf84bb10ea7c0b42 libbluray-1.1.2.tar.bz2"
-ARG         LIBZMQ_SHA256SUM="02ecc88466ae38cf2c8d79f09cfd2675ba299a439680b64ade733e26a349edeb v4.3.2.tar.gz"
-ARG         LIBARIBB24_SHA256SUM="f61560738926e57f9173510389634d8c06cabedfa857db4b28fb7704707ff128 v1.0.3.tar.gz"
-
 
 ARG         LD_LIBRARY_PATH=/opt/ffmpeg/lib
 ARG         MAKEFLAGS="-j2"
@@ -136,204 +97,20 @@ RUN     buildDeps="autoconf \
         yum history undo $(yum history info | grep 'Transaction ID' | awk -F: '{print$2}' | tr -d ' ') -y && \
         yum autoremove -y
 
-## libvmaf https://github.com/Netflix/vmaf
-RUN \
-        if which meson || false; then \
-        echo "Building VMAF." && \
-        DIR=/tmp/vmaf && \
-        mkdir -p ${DIR} && \
-        cd ${DIR} && \
-        curl -sLO https://github.com/Netflix/vmaf/archive/v${LIBVMAF_VERSION}.tar.gz && \
-        tar -xz --strip-components=1 -f v${LIBVMAF_VERSION}.tar.gz && \
-        cd /tmp/vmaf/libvmaf && \
-        meson build --buildtype release --prefix=${PREFIX} && \
-        ninja -vC build && \
-        ninja -vC build install && \
-        mkdir -p ${PREFIX}/share/model/ && \
-        cp -r /tmp/vmaf/model/* ${PREFIX}/share/model/ && \
-        rm -rf ${DIR}; \
-        else \
-        echo "VMAF skipped."; \
-        fi
 
-## opencore-amr https://sourceforge.net/projects/opencore-amr/
-RUN \
-        DIR=/tmp/opencore-amr && \
-        mkdir -p ${DIR} && \
-        cd ${DIR} && \
-        curl -sL https://sourceforge.net/projects/opencore-amr/files/opencore-amr/opencore-amr-${OPENCOREAMR_VERSION}.tar.gz/download | \
-        tar -zx --strip-components=1 && \
-        ./configure --prefix="${PREFIX}" --enable-shared  && \
-        make -j $(nproc | awk '{print $1 / 2}') && \
-        make install && \
-        rm -rf ${DIR}
-## x264 http://www.videolan.org/developers/x264.html
-RUN \
-        DIR=/tmp/x264 && \
-        mkdir -p ${DIR} && \
-        cd ${DIR} && \
-        curl -sL https://download.videolan.org/pub/videolan/x264/snapshots/x264-snapshot-${X264_VERSION}.tar.bz2 | \
-        tar -jx --strip-components=1 && \
-        ./configure --prefix="${PREFIX}" --enable-shared --enable-pic --disable-cli && \
-        make -j $(nproc | awk '{print $1 / 2}') && \
-        make install && \
-        rm -rf ${DIR}
-### x265 http://x265.org/
-RUN \
-        DIR=/tmp/x265 && \
-        mkdir -p ${DIR} && \
-        cd ${DIR} && \
-        curl -sL https://github.com/videolan/x265/archive/refs/tags/${X265_VERSION}.tar.gz | \
-        tar -zx && \
-        cd x265-${X265_VERSION}/build/linux && \
-        sed -i "/-DEXTRA_LIB/ s/$/ -DCMAKE_INSTALL_PREFIX=\${PREFIX}/" multilib.sh && \
-        sed -i "/^cmake/ s/$/ -DENABLE_CLI=OFF/" multilib.sh && \
-        ./multilib.sh && \
-        make -C 8bit install && \
-        rm -rf ${DIR}
-### libogg https://www.xiph.org/ogg/
-RUN \
-        DIR=/tmp/ogg && \
-        mkdir -p ${DIR} && \
-        cd ${DIR} && \
-        curl -sLO http://downloads.xiph.org/releases/ogg/libogg-${OGG_VERSION}.tar.gz && \
-        echo ${OGG_SHA256SUM} | sha256sum --check && \
-        tar -zx --strip-components=1 -f libogg-${OGG_VERSION}.tar.gz && \
-        ./configure --prefix="${PREFIX}" --enable-shared  && \
-        make -j $(nproc | awk '{print $1 / 2}') && \
-        make install && \
-        rm -rf ${DIR}
-### libopus https://www.opus-codec.org/
-RUN \
-        DIR=/tmp/opus && \
-        mkdir -p ${DIR} && \
-        cd ${DIR} && \
-        curl -sLO https://archive.mozilla.org/pub/opus/opus-${OPUS_VERSION}.tar.gz && \
-        echo ${OPUS_SHA256SUM} | sha256sum --check && \
-        tar -zx --strip-components=1 -f opus-${OPUS_VERSION}.tar.gz && \
-        autoreconf -fiv && \
-        ./configure --prefix="${PREFIX}" --enable-shared && \
-        make -j $(nproc | awk '{print $1 / 2}') && \
-        make install && \
-        rm -rf ${DIR}
-### libvorbis https://xiph.org/vorbis/
-RUN \
-        DIR=/tmp/vorbis && \
-        mkdir -p ${DIR} && \
-        cd ${DIR} && \
-        curl -sLO http://downloads.xiph.org/releases/vorbis/libvorbis-${VORBIS_VERSION}.tar.gz && \
-        echo ${VORBIS_SHA256SUM} | sha256sum --check && \
-        tar -zx --strip-components=1 -f libvorbis-${VORBIS_VERSION}.tar.gz && \
-        ./configure --prefix="${PREFIX}" --with-ogg="${PREFIX}" --enable-shared && \
-        make -j $(nproc | awk '{print $1 / 2}') && \
-        make install && \
-        rm -rf ${DIR}
-### libtheora http://www.theora.org/
-RUN \
-        DIR=/tmp/theora && \
-        mkdir -p ${DIR} && \
-        cd ${DIR} && \
-        curl -sLO http://downloads.xiph.org/releases/theora/libtheora-${THEORA_VERSION}.tar.gz && \
-        echo ${THEORA_SHA256SUM} | sha256sum --check && \
-        tar -zx --strip-components=1 -f libtheora-${THEORA_VERSION}.tar.gz && \
-        ./configure --prefix="${PREFIX}" --with-ogg="${PREFIX}" --enable-shared && \
-        make -j $(nproc | awk '{print $1 / 2}') && \
-        make install && \
-        rm -rf ${DIR}
-### libvpx https://www.webmproject.org/code/
-RUN \
-        DIR=/tmp/vpx && \
-        mkdir -p ${DIR} && \
-        cd ${DIR} && \
-        curl -sL https://codeload.github.com/webmproject/libvpx/tar.gz/v${VPX_VERSION} | \
-        tar -zx --strip-components=1 && \
-        ./configure --prefix="${PREFIX}" --enable-vp8 --enable-vp9 --enable-vp9-highbitdepth --enable-pic --enable-shared \
-        --disable-debug --disable-examples --disable-docs --disable-install-bins  && \
-        make -j $(nproc | awk '{print $1 / 2}') && \
-        make install && \
-        rm -rf ${DIR}
-### libwebp https://developers.google.com/speed/webp/
-RUN \
-        DIR=/tmp/vebp && \
-        mkdir -p ${DIR} && \
-        cd ${DIR} && \
-        curl -sL https://storage.googleapis.com/downloads.webmproject.org/releases/webp/libwebp-${WEBP_VERSION}.tar.gz | \
-        tar -zx --strip-components=1 && \
-        ./configure --prefix="${PREFIX}" --enable-shared  && \
-        make -j $(nproc | awk '{print $1 / 2}') && \
-        make install && \
-        rm -rf ${DIR}
-### libmp3lame http://lame.sourceforge.net/
-RUN \
-        DIR=/tmp/lame && \
-        mkdir -p ${DIR} && \
-        cd ${DIR} && \
-        curl -sL https://sourceforge.net/projects/lame/files/lame/${LAME_VERSION}/lame-${LAME_VERSION}.tar.gz/download | \
-        tar -zx --strip-components=1 && \
-        ./configure --prefix="${PREFIX}" --bindir="${PREFIX}/bin" --enable-shared --enable-nasm --disable-frontend && \
-        make -j $(nproc | awk '{print $1 / 2}') && \
-        make install && \
-        rm -rf ${DIR}
-### xvid https://www.xvid.com/
-RUN \
-        DIR=/tmp/xvid && \
-        mkdir -p ${DIR} && \
-        cd ${DIR} && \
-        curl -sLO http://downloads.xvid.org/downloads/xvidcore-${XVID_VERSION}.tar.gz && \
-        echo ${XVID_SHA256SUM} | sha256sum --check && \
-        tar -zx -f xvidcore-${XVID_VERSION}.tar.gz && \
-        cd xvidcore/build/generic && \
-        ./configure --prefix="${PREFIX}" --bindir="${PREFIX}/bin" && \
-        make -j $(nproc | awk '{print $1 / 2}') && \
-        make install && \
-        rm -rf ${DIR}
-### fdk-aac https://github.com/mstorsjo/fdk-aac
-RUN \
-        DIR=/tmp/fdk-aac && \
-        mkdir -p ${DIR} && \
-        cd ${DIR} && \
-        curl -sL https://github.com/mstorsjo/fdk-aac/archive/v${FDKAAC_VERSION}.tar.gz | \
-        tar -zx --strip-components=1 && \
-        autoreconf -fiv && \
-        ./configure --prefix="${PREFIX}" --enable-shared --datadir="${DIR}" && \
-        make -j $(nproc | awk '{print $1 / 2}') && \
-        make install && \
-        rm -rf ${DIR}
-## openjpeg https://github.com/uclouvain/openjpeg
-RUN \
-        DIR=/tmp/openjpeg && \
-        mkdir -p ${DIR} && \
-        cd ${DIR} && \
-        curl -sL https://github.com/uclouvain/openjpeg/archive/v${OPENJPEG_VERSION}.tar.gz | \
-        tar -zx --strip-components=1 && \
-        cmake -DBUILD_THIRDPARTY:BOOL=ON -DCMAKE_INSTALL_PREFIX="${PREFIX}" . && \
-        make -j $(nproc | awk '{print $1 / 2}') && \
-        make install && \
-        rm -rf ${DIR}
-## freetype https://www.freetype.org/
-RUN  \
-        DIR=/tmp/freetype && \
-        mkdir -p ${DIR} && \
-        cd ${DIR} && \
-        curl -sLO https://download.savannah.gnu.org/releases/freetype/freetype-${FREETYPE_VERSION}.tar.gz && \
-        echo ${FREETYPE_SHA256SUM} | sha256sum --check && \
-        tar -zx --strip-components=1 -f freetype-${FREETYPE_VERSION}.tar.gz && \
-        ./configure --prefix="${PREFIX}" --disable-static --enable-shared && \
-        make -j $(nproc | awk '{print $1 / 2}') && \
-        make install && \
-        rm -rf ${DIR}
-## libvstab https://github.com/georgmartius/vid.stab
-RUN  \
-        DIR=/tmp/vid.stab && \
-        mkdir -p ${DIR} && \
-        cd ${DIR} && \
-        curl -sLO https://github.com/georgmartius/vid.stab/archive/v${LIBVIDSTAB_VERSION}.tar.gz && \
-        echo ${LIBVIDSTAB_SHA256SUM} | sha256sum --check &&  \
-        tar -zx --strip-components=1 -f v${LIBVIDSTAB_VERSION}.tar.gz && \
-        cmake -DCMAKE_INSTALL_PREFIX="${PREFIX}" . && \
-        make -j $(nproc | awk '{print $1 / 2}') && \
-        make install && \
-        rm -rf ${DIR}
+RUN yum -y install \
+    lame-libs \
+    openjpeg-libs \
+    opus \
+    srt-libs \
+    libvorbis \
+    libvpx \
+    libwebp \
+    libogg \
+    x264-libs \
+    x265-libs \
+    zeromq
+
 ## fridibi https://www.fribidi.org/
 RUN  \
         DIR=/tmp/fribidi && \
@@ -348,6 +125,19 @@ RUN  \
         make -j1 && \
         make install && \
         rm -rf ${DIR}
+
+## freetype https://www.freetype.org/
+RUN  \
+        DIR=/tmp/freetype && \
+        mkdir -p ${DIR} && \
+        cd ${DIR} && \
+        curl -sLO https://download.savannah.gnu.org/releases/freetype/freetype-${FREETYPE_VERSION}.tar.gz && \
+        echo ${FREETYPE_SHA256SUM} | sha256sum --check && \
+        tar -zx --strip-components=1 -f freetype-${FREETYPE_VERSION}.tar.gz && \
+        ./configure --prefix="${PREFIX}" --disable-static --enable-shared && \
+        make -j $(nproc | awk '{print $1 / 2}') && \
+        make install && \
+        rm -rf ${DIR}
 ## fontconfig https://www.freedesktop.org/wiki/Software/fontconfig/
 RUN  \
         DIR=/tmp/fontconfig && \
@@ -372,18 +162,6 @@ RUN  \
         make -j $(nproc | awk '{print $1 / 2}') && \
         make install && \
         rm -rf ${DIR}
-## kvazaar https://github.com/ultravideo/kvazaar
-RUN \
-        DIR=/tmp/kvazaar && \
-        mkdir -p ${DIR} && \
-        cd ${DIR} && \
-        curl -sLO https://github.com/ultravideo/kvazaar/archive/v${KVAZAAR_VERSION}.tar.gz && \
-        tar -zx --strip-components=1 -f v${KVAZAAR_VERSION}.tar.gz && \
-        ./autogen.sh && \
-        ./configure --prefix="${PREFIX}" --disable-static --enable-shared && \
-        make -j $(nproc | awk '{print $1 / 2}') && \
-        make install && \
-        rm -rf ${DIR}
 
 RUN \
         DIR=/tmp/aom && \
@@ -397,153 +175,6 @@ RUN \
         make install ; \
         rm -rf ${DIR}
 
-## libxcb (and supporting libraries) for screen capture https://xcb.freedesktop.org/
-RUN \
-        DIR=/tmp/xorg-macros && \
-        mkdir -p ${DIR} && \
-        cd ${DIR} && \
-        curl -sLO https://www.x.org/archive//individual/util/util-macros-${XORG_MACROS_VERSION}.tar.gz && \
-        tar -zx --strip-components=1 -f util-macros-${XORG_MACROS_VERSION}.tar.gz && \
-        ./configure --srcdir=${DIR} --prefix="${PREFIX}" && \
-        make -j $(nproc | awk '{print $1 / 2}') && \
-        make install && \
-        rm -rf ${DIR}
-
-RUN \
-        DIR=/tmp/xproto && \
-        mkdir -p ${DIR} && \
-        cd ${DIR} && \
-        curl -sLO https://www.x.org/archive/individual/proto/xproto-${XPROTO_VERSION}.tar.gz && \
-        tar -zx --strip-components=1 -f xproto-${XPROTO_VERSION}.tar.gz && \
-        ./configure --srcdir=${DIR} --prefix="${PREFIX}" && \
-        make -j $(nproc | awk '{print $1 / 2}') && \
-        make install && \
-        rm -rf ${DIR}
-
-RUN \
-        DIR=/tmp/libXau && \
-        mkdir -p ${DIR} && \
-        cd ${DIR} && \
-        curl -sLO https://www.x.org/archive/individual/lib/libXau-${XAU_VERSION}.tar.gz && \
-        tar -zx --strip-components=1 -f libXau-${XAU_VERSION}.tar.gz && \
-        ./configure --srcdir=${DIR} --prefix="${PREFIX}" && \
-        make -j $(nproc | awk '{print $1 / 2}') && \
-        make install && \
-        rm -rf ${DIR}
-
-RUN \
-        DIR=/tmp/libpthread-stubs && \
-        mkdir -p ${DIR} && \
-        cd ${DIR} && \
-        curl -sLO https://xcb.freedesktop.org/dist/libpthread-stubs-${LIBPTHREAD_STUBS_VERSION}.tar.gz && \
-        tar -zx --strip-components=1 -f libpthread-stubs-${LIBPTHREAD_STUBS_VERSION}.tar.gz && \
-        ./configure --prefix="${PREFIX}" && \
-        make -j $(nproc | awk '{print $1 / 2}') && \
-        make install && \
-        rm -rf ${DIR}
-
-RUN \
-        DIR=/tmp/libxcb-proto && \
-        mkdir -p ${DIR} && \
-        cd ${DIR} && \
-        curl -sLO https://xcb.freedesktop.org/dist/xcb-proto-${XCBPROTO_VERSION}.tar.gz && \
-        tar -zx --strip-components=1 -f xcb-proto-${XCBPROTO_VERSION}.tar.gz && \
-        ACLOCAL_PATH="${PREFIX}/share/aclocal" ./autogen.sh && \
-        ./configure --prefix="${PREFIX}" && \
-        make -j $(nproc | awk '{print $1 / 2}') && \
-        make install && \
-        rm -rf ${DIR}
-
-RUN \
-        DIR=/tmp/libxcb && \
-        mkdir -p ${DIR} && \
-        cd ${DIR} && \
-        curl -sLO https://xcb.freedesktop.org/dist/libxcb-${LIBXCB_VERSION}.tar.gz && \
-        tar -zx --strip-components=1 -f libxcb-${LIBXCB_VERSION}.tar.gz && \
-        ACLOCAL_PATH="${PREFIX}/share/aclocal" ./autogen.sh && \
-        ./configure --prefix="${PREFIX}" --disable-static --enable-shared && \
-        make -j $(nproc | awk '{print $1 / 2}') && \
-        make install && \
-        rm -rf ${DIR}
-
-## libxml2 - for libbluray
-RUN \
-        DIR=/tmp/libxml2 && \
-        mkdir -p ${DIR} && \
-        cd ${DIR} && \
-        curl -sL https://github.com/GNOME/libxml2/archive/refs/tags/v${LIBXML2_VERSION}.tar.gz | \
-        tar -xz --strip-components=1 && \
-        ./autogen.sh --prefix="${PREFIX}" --with-ftp=no --with-http=no --with-python=no && \
-        make -j $(nproc | awk '{print $1 / 2}') && \
-        make install && \
-        rm -rf ${DIR}
-
-## libbluray - Requires libxml, freetype, and fontconfig
-RUN \
-        DIR=/tmp/libbluray && \
-        mkdir -p ${DIR} && \
-        cd ${DIR} && \
-        curl -sLO https://download.videolan.org/pub/videolan/libbluray/${LIBBLURAY_VERSION}/libbluray-${LIBBLURAY_VERSION}.tar.bz2 && \
-        echo ${LIBBLURAY_SHA256SUM} | sha256sum --check && \
-        tar -jx --strip-components=1 -f libbluray-${LIBBLURAY_VERSION}.tar.bz2 && \
-        ./configure --prefix="${PREFIX}" --disable-examples --disable-bdjava-jar --disable-static --enable-shared && \
-        make -j $(nproc | awk '{print $1 / 2}') && \
-        make install && \
-        rm -rf ${DIR}
-
-## libzmq https://github.com/zeromq/libzmq/
-RUN \
-        DIR=/tmp/libzmq && \
-        mkdir -p ${DIR} && \
-        cd ${DIR} && \
-        curl -sLO https://github.com/zeromq/libzmq/archive/v${LIBZMQ_VERSION}.tar.gz && \
-        echo ${LIBZMQ_SHA256SUM} | sha256sum --check && \
-        tar -xz --strip-components=1 -f v${LIBZMQ_VERSION}.tar.gz && \
-        ./autogen.sh && \
-        ./configure --prefix="${PREFIX}" && \
-        make -j $(nproc | awk '{print $1 / 2}') && \
-        make check && \
-        make install && \
-        rm -rf ${DIR}
-
-## libsrt https://github.com/Haivision/srt
-RUN \
-        DIR=/tmp/srt && \
-        mkdir -p ${DIR} && \
-        cd ${DIR} && \
-        curl -sLO https://github.com/Haivision/srt/archive/v${LIBSRT_VERSION}.tar.gz && \
-        tar -xz --strip-components=1 -f v${LIBSRT_VERSION}.tar.gz && \
-        cmake -DCMAKE_INSTALL_PREFIX="${PREFIX}" . && \
-        make -j $(nproc | awk '{print $1 / 2}') && \
-        make install && \
-        rm -rf ${DIR}
-
-## libpng
-RUN \
-        DIR=/tmp/png && \
-        mkdir -p ${DIR} && \
-        cd ${DIR} && \
-        git clone https://git.code.sf.net/p/libpng/code ${DIR} -b v${LIBPNG_VERSION} --depth 1 && \
-        ./autogen.sh && \
-        ./configure --prefix="${PREFIX}" && \
-        make check && \
-        make install && \
-        rm -rf ${DIR}
-
-## libaribb24
-RUN \
-        DIR=/tmp/b24 && \
-        mkdir -p ${DIR} && \
-        cd ${DIR} && \
-        curl -sLO https://github.com/nkoriyama/aribb24/archive/v${LIBARIBB24_VERSION}.tar.gz && \
-        echo ${LIBARIBB24_SHA256SUM} | sha256sum --check && \
-        tar -xz --strip-components=1 -f v${LIBARIBB24_VERSION}.tar.gz && \
-        autoreconf -fiv && \
-        ./configure CFLAGS="-I${PREFIX}/include -fPIC" --prefix="${PREFIX}" && \
-        make -j $(nproc | awk '{print $1 / 2}') && \
-        make install && \
-        rm -rf ${DIR}
-
 ## Download ffmpeg https://ffmpeg.org/
 RUN  \
         DIR=/tmp/ffmpeg && mkdir -p ${DIR} && cd ${DIR} && \
@@ -561,26 +192,17 @@ RUN  \
         --disable-ffplay \
         --enable-gpl \
         --enable-libaom \
-        --enable-libaribb24 \
         --enable-libass \
-        --enable-libbluray \
-        --enable-libfdk_aac \
         --enable-libfreetype \
         --enable-libmp3lame \
-        --enable-libopencore-amrnb \
-        --enable-libopencore-amrwb \
         --enable-libopenjpeg \
         --enable-libopus \
         --enable-libsrt \
-        --enable-libtheora \
-        --enable-libvidstab \
         --enable-libvorbis \
         --enable-libvpx \
         --enable-libwebp \
         --enable-libx264 \
         --enable-libx265 \
-        --enable-libxcb \
-        --enable-libxvid \
         --enable-libzmq \
         --enable-nonfree \
         --enable-fontconfig \
@@ -615,7 +237,7 @@ RUN \
 
 FROM        base
 
-ARG FFPLAYOUT_VERSION=0.16.7
+ARG FFPLAYOUT_VERSION=0.17.1
 
 ENV LD_LIBRARY_PATH=/usr/local/lib64:/usr/local/lib
 
@@ -633,7 +255,7 @@ RUN \
     && mkdir -p /home/ffpu && chown -R ffpu: /home/ffpu \
     && systemctl enable ffplayout \
     && systemctl enable ffpapi \
-    && ffpapi -u admin -p admin -m contact@example.com \
+    && ffpapi -u admin -p admin -m contact@example.com
 
 EXPOSE 8787
 
diff --git a/docker/README.md b/docker/README.md
index 8fcc6b3d..6e832755 100644
--- a/docker/README.md
+++ b/docker/README.md
@@ -31,7 +31,9 @@ It may be useful to create/link volume for those folders/files.
 ## Docker
 
 How to build the image  
-`docker build -t ffplayout-image .`
+`docker build -t ffplayout-image .`  
+`docker build -f fromSource.Dockerfile -t ffplayout-image:from-source .`  
+`docker build -f Almalinux.Dockerfile -t ffplayout-image:almalinux .`
 
 example of command to start the container:
 
@@ -90,7 +92,7 @@ spec:
         hostPath:
           path: '/sys/fs/cgroup'
           type: Directory
-	  - name: database-volume
+      - name: database-volume
         ephemeral:
           volumeClaimTemplate:
             metadata:
diff --git a/docker/fromSource.Dockerfile b/docker/fromSource.Dockerfile
new file mode 100644
index 00000000..d166e2f7
--- /dev/null
+++ b/docker/fromSource.Dockerfile
@@ -0,0 +1,448 @@
+FROM    centos:7 AS base
+
+ENV container docker
+RUN     yum -y install libgomp && \
+        yum clean all;
+
+RUN (cd /lib/systemd/system/sysinit.target.wants/; for i in *; do [ $i == \
+systemd-tmpfiles-setup.service ] || rm -f $i; done); \
+rm -f /lib/systemd/system/multi-user.target.wants/*;\
+rm -f /etc/systemd/system/*.wants/*;\
+rm -f /lib/systemd/system/local-fs.target.wants/*; \
+rm -f /lib/systemd/system/sockets.target.wants/*udev*; \
+rm -f /lib/systemd/system/sockets.target.wants/*initctl*; \
+rm -f /lib/systemd/system/basic.target.wants/*;\
+rm -f /lib/systemd/system/anaconda.target.wants/*;
+
+
+FROM        base AS build
+
+WORKDIR     /tmp/workdir
+
+
+ENV    FFMPEG_VERSION=5.1.2 \
+    AOM_VERSION=v1.0.0 \
+    FDKAAC_VERSION=0.1.5 \
+    FONTCONFIG_VERSION=2.12.4 \
+    FREETYPE_VERSION=2.10.4 \
+    FRIBIDI_VERSION=0.19.7 \
+    KVAZAAR_VERSION=2.0.0 \
+    LAME_VERSION=3.100 \
+    LIBASS_VERSION=0.13.7 \
+    LIBPTHREAD_STUBS_VERSION=0.4 \
+    OGG_VERSION=1.3.2 \
+    OPUS_VERSION=1.2 \
+    OPENJPEG_VERSION=2.1.2 \
+    VORBIS_VERSION=1.3.5 \
+    VPX_VERSION=1.8.0 \
+    WEBP_VERSION=1.0.2 \
+    X264_VERSION=20170226-2245-stable \
+    X265_VERSION=3.4 \
+    LIBZMQ_VERSION=4.3.2 \
+    LIBSRT_VERSION=1.4.1 \
+    LIBPNG_VERSION=1.6.9 \
+    SRC=/usr/local
+
+ARG         FREETYPE_SHA256SUM="5eab795ebb23ac77001cfb68b7d4d50b5d6c7469247b0b01b2c953269f658dac freetype-2.10.4.tar.gz"
+ARG         FRIBIDI_SHA256SUM="3fc96fa9473bd31dcb5500bdf1aa78b337ba13eb8c301e7c28923fea982453a8 0.19.7.tar.gz"
+ARG         LIBASS_SHA256SUM="8fadf294bf701300d4605e6f1d92929304187fca4b8d8a47889315526adbafd7 0.13.7.tar.gz"
+ARG         OGG_SHA256SUM="e19ee34711d7af328cb26287f4137e70630e7261b17cbe3cd41011d73a654692 libogg-1.3.2.tar.gz"
+ARG         OPUS_SHA256SUM="77db45a87b51578fbc49555ef1b10926179861d854eb2613207dc79d9ec0a9a9 opus-1.2.tar.gz"
+ARG         VORBIS_SHA256SUM="6efbcecdd3e5dfbf090341b485da9d176eb250d893e3eb378c428a2db38301ce libvorbis-1.3.5.tar.gz"
+ARG         LIBZMQ_SHA256SUM="02ecc88466ae38cf2c8d79f09cfd2675ba299a439680b64ade733e26a349edeb v4.3.2.tar.gz"
+
+ARG         LD_LIBRARY_PATH=/opt/ffmpeg/lib
+ARG         MAKEFLAGS="-j2"
+ARG         PKG_CONFIG_PATH="/opt/ffmpeg/share/pkgconfig:/opt/ffmpeg/lib/pkgconfig:/opt/ffmpeg/lib64/pkgconfig"
+ARG         PREFIX=/opt/ffmpeg
+ARG         LD_LIBRARY_PATH="/opt/ffmpeg/lib:/opt/ffmpeg/lib64"
+
+
+RUN     buildDeps="autoconf \
+                   automake \
+                   bzip2 \
+                   cmake3 \
+                   diffutils \
+                   expat-devel \
+                   file \
+                   gcc \
+                   gcc-c++ \
+                   git \
+                   gperf \
+                   libtool \
+                   make \
+                   perl \
+                   python3 \
+                   openssl-devel \
+                   tar \
+                   yasm \
+                   which \
+                   zlib-devel" && \
+        echo "${SRC}/lib" > /etc/ld.so.conf.d/libc.conf && \
+        yum --enablerepo=extras install -y epel-release && \
+        yum --enablerepo=epel install -y ${buildDeps} && \
+        alternatives --install /usr/bin/cmake cmake /usr/bin/cmake3 0 && \
+        # Install the tools required to build nasm 2.14.02 \
+        nasmDeps="asciidoc \
+                  perl-Font-TTF \
+                  perl-Sort-Versions \
+                  xmlto" && \
+        yum --enablerepo=epel install -y ${nasmDeps} && \
+        # Compile and install nasm 2.14.02 \
+        DIR=/tmp/nasm && \
+        mkdir -p ${DIR} && \
+        curl -LSs https://www.nasm.us/pub/nasm/releasebuilds/2.14.02/nasm-2.14.02.tar.gz | \
+        tar xzC ${DIR} --strip-components=1 && \
+        pushd ${DIR} && \
+        ./configure --host=x86_64-redhat-linux-gnu \
+                    --build=x86_64-redhat-linux-gnu \
+                    --prefix=/usr/local \
+                    --exec-prefix=/usr/local \
+                    --bindir=/usr/local/bin \
+                    --sbindir=/usr/local/sbin \
+                    --sysconfdir=/usr/local/etc \
+                    --datadir=/usr/local/share \
+                    --includedir=/usr/local/include \
+                    --libdir=/usr/local/lib \
+                    --libexecdir=/usr/local/libexec \
+                    --enable-sections && \
+        make all && \
+        make install && \
+        make install_rdf && \
+        popd && rm -rf ${DIR} && \
+        alternatives --install /usr/bin/nasm nasm /usr/local/bin/nasm 0 && \
+        # Now that we have a modern nasm build and available, we can undo the last \
+        # yum transaction as none of those packages are required for the rest of the build \
+        yum history undo $(yum history info | grep 'Transaction ID' | awk -F: '{print$2}' | tr -d ' ') -y && \
+        yum autoremove -y
+## x264 http://www.videolan.org/developers/x264.html
+RUN \
+        DIR=/tmp/x264 && \
+        mkdir -p ${DIR} && \
+        cd ${DIR} && \
+        curl -sL https://download.videolan.org/pub/videolan/x264/snapshots/x264-snapshot-${X264_VERSION}.tar.bz2 | \
+        tar -jx --strip-components=1 && \
+        ./configure --prefix="${PREFIX}" --enable-shared --enable-pic --disable-cli && \
+        make -j $(nproc | awk '{print $1 / 2}') && \
+        make install && \
+        rm -rf ${DIR}
+### x265 http://x265.org/
+RUN \
+        DIR=/tmp/x265 && \
+        mkdir -p ${DIR} && \
+        cd ${DIR} && \
+        curl -sL https://github.com/videolan/x265/archive/refs/tags/${X265_VERSION}.tar.gz | \
+        tar -zx && \
+        cd x265-${X265_VERSION}/build/linux && \
+        sed -i "/-DEXTRA_LIB/ s/$/ -DCMAKE_INSTALL_PREFIX=\${PREFIX}/" multilib.sh && \
+        sed -i "/^cmake/ s/$/ -DENABLE_CLI=OFF/" multilib.sh && \
+        ./multilib.sh && \
+        make -C 8bit install && \
+        rm -rf ${DIR}
+### libogg https://www.xiph.org/ogg/
+RUN \
+        DIR=/tmp/ogg && \
+        mkdir -p ${DIR} && \
+        cd ${DIR} && \
+        curl -sLO http://downloads.xiph.org/releases/ogg/libogg-${OGG_VERSION}.tar.gz && \
+        echo ${OGG_SHA256SUM} | sha256sum --check && \
+        tar -zx --strip-components=1 -f libogg-${OGG_VERSION}.tar.gz && \
+        ./configure --prefix="${PREFIX}" --enable-shared  && \
+        make -j $(nproc | awk '{print $1 / 2}') && \
+        make install && \
+        rm -rf ${DIR}
+### libopus https://www.opus-codec.org/
+RUN \
+        DIR=/tmp/opus && \
+        mkdir -p ${DIR} && \
+        cd ${DIR} && \
+        curl -sLO https://archive.mozilla.org/pub/opus/opus-${OPUS_VERSION}.tar.gz && \
+        echo ${OPUS_SHA256SUM} | sha256sum --check && \
+        tar -zx --strip-components=1 -f opus-${OPUS_VERSION}.tar.gz && \
+        autoreconf -fiv && \
+        ./configure --prefix="${PREFIX}" --enable-shared && \
+        make -j $(nproc | awk '{print $1 / 2}') && \
+        make install && \
+        rm -rf ${DIR}
+### libvorbis https://xiph.org/vorbis/
+RUN \
+        DIR=/tmp/vorbis && \
+        mkdir -p ${DIR} && \
+        cd ${DIR} && \
+        curl -sLO http://downloads.xiph.org/releases/vorbis/libvorbis-${VORBIS_VERSION}.tar.gz && \
+        echo ${VORBIS_SHA256SUM} | sha256sum --check && \
+        tar -zx --strip-components=1 -f libvorbis-${VORBIS_VERSION}.tar.gz && \
+        ./configure --prefix="${PREFIX}" --with-ogg="${PREFIX}" --enable-shared && \
+        make -j $(nproc | awk '{print $1 / 2}') && \
+        make install && \
+        rm -rf ${DIR}
+### libvpx https://www.webmproject.org/code/
+RUN \
+        DIR=/tmp/vpx && \
+        mkdir -p ${DIR} && \
+        cd ${DIR} && \
+        curl -sL https://codeload.github.com/webmproject/libvpx/tar.gz/v${VPX_VERSION} | \
+        tar -zx --strip-components=1 && \
+        ./configure --prefix="${PREFIX}" --enable-vp8 --enable-vp9 --enable-vp9-highbitdepth --enable-pic --enable-shared \
+        --disable-debug --disable-examples --disable-docs --disable-install-bins  && \
+        make -j $(nproc | awk '{print $1 / 2}') && \
+        make install && \
+        rm -rf ${DIR}
+### libwebp https://developers.google.com/speed/webp/
+RUN \
+        DIR=/tmp/vebp && \
+        mkdir -p ${DIR} && \
+        cd ${DIR} && \
+        curl -sL https://storage.googleapis.com/downloads.webmproject.org/releases/webp/libwebp-${WEBP_VERSION}.tar.gz | \
+        tar -zx --strip-components=1 && \
+        ./configure --prefix="${PREFIX}" --enable-shared  && \
+        make -j $(nproc | awk '{print $1 / 2}') && \
+        make install && \
+        rm -rf ${DIR}
+### libmp3lame http://lame.sourceforge.net/
+RUN \
+        DIR=/tmp/lame && \
+        mkdir -p ${DIR} && \
+        cd ${DIR} && \
+        curl -sL https://sourceforge.net/projects/lame/files/lame/${LAME_VERSION}/lame-${LAME_VERSION}.tar.gz/download | \
+        tar -zx --strip-components=1 && \
+        ./configure --prefix="${PREFIX}" --bindir="${PREFIX}/bin" --enable-shared --enable-nasm --disable-frontend && \
+        make -j $(nproc | awk '{print $1 / 2}') && \
+        make install && \
+        rm -rf ${DIR}
+### fdk-aac https://github.com/mstorsjo/fdk-aac
+RUN \
+        DIR=/tmp/fdk-aac && \
+        mkdir -p ${DIR} && \
+        cd ${DIR} && \
+        curl -sL https://github.com/mstorsjo/fdk-aac/archive/v${FDKAAC_VERSION}.tar.gz | \
+        tar -zx --strip-components=1 && \
+        autoreconf -fiv && \
+        ./configure --prefix="${PREFIX}" --enable-shared --datadir="${DIR}" && \
+        make -j $(nproc | awk '{print $1 / 2}') && \
+        make install && \
+        rm -rf ${DIR}
+## openjpeg https://github.com/uclouvain/openjpeg
+RUN \
+        DIR=/tmp/openjpeg && \
+        mkdir -p ${DIR} && \
+        cd ${DIR} && \
+        curl -sL https://github.com/uclouvain/openjpeg/archive/v${OPENJPEG_VERSION}.tar.gz | \
+        tar -zx --strip-components=1 && \
+        cmake -DBUILD_THIRDPARTY:BOOL=ON -DCMAKE_INSTALL_PREFIX="${PREFIX}" . && \
+        make -j $(nproc | awk '{print $1 / 2}') && \
+        make install && \
+        rm -rf ${DIR}
+## freetype https://www.freetype.org/
+RUN  \
+        DIR=/tmp/freetype && \
+        mkdir -p ${DIR} && \
+        cd ${DIR} && \
+        curl -sLO https://download.savannah.gnu.org/releases/freetype/freetype-${FREETYPE_VERSION}.tar.gz && \
+        echo ${FREETYPE_SHA256SUM} | sha256sum --check && \
+        tar -zx --strip-components=1 -f freetype-${FREETYPE_VERSION}.tar.gz && \
+        ./configure --prefix="${PREFIX}" --disable-static --enable-shared && \
+        make -j $(nproc | awk '{print $1 / 2}') && \
+        make install && \
+        rm -rf ${DIR}
+## fridibi https://www.fribidi.org/
+RUN  \
+        DIR=/tmp/fribidi && \
+        mkdir -p ${DIR} && \
+        cd ${DIR} && \
+        curl -sLO https://github.com/fribidi/fribidi/archive/${FRIBIDI_VERSION}.tar.gz && \
+        echo ${FRIBIDI_SHA256SUM} | sha256sum --check && \
+        tar -zx --strip-components=1 -f ${FRIBIDI_VERSION}.tar.gz && \
+        sed -i 's/^SUBDIRS =.*/SUBDIRS=gen.tab charset lib bin/' Makefile.am && \
+        ./bootstrap --no-config --auto && \
+        ./configure --prefix="${PREFIX}" --disable-static --enable-shared && \
+        make -j1 && \
+        make install && \
+        rm -rf ${DIR}
+## fontconfig https://www.freedesktop.org/wiki/Software/fontconfig/
+RUN  \
+        DIR=/tmp/fontconfig && \
+        mkdir -p ${DIR} && \
+        cd ${DIR} && \
+        curl -sLO https://www.freedesktop.org/software/fontconfig/release/fontconfig-${FONTCONFIG_VERSION}.tar.bz2 && \
+        tar -jx --strip-components=1 -f fontconfig-${FONTCONFIG_VERSION}.tar.bz2 && \
+        ./configure --prefix="${PREFIX}" --disable-static --enable-shared && \
+        make -j $(nproc | awk '{print $1 / 2}') && \
+        make install && \
+        rm -rf ${DIR}
+## libass https://github.com/libass/libass
+RUN  \
+        DIR=/tmp/libass && \
+        mkdir -p ${DIR} && \
+        cd ${DIR} && \
+        curl -sLO https://github.com/libass/libass/archive/${LIBASS_VERSION}.tar.gz && \
+        echo ${LIBASS_SHA256SUM} | sha256sum --check && \
+        tar -zx --strip-components=1 -f ${LIBASS_VERSION}.tar.gz && \
+        ./autogen.sh && \
+        ./configure --prefix="${PREFIX}" --disable-static --enable-shared && \
+        make -j $(nproc | awk '{print $1 / 2}') && \
+        make install && \
+        rm -rf ${DIR}
+## kvazaar https://github.com/ultravideo/kvazaar
+RUN \
+        DIR=/tmp/kvazaar && \
+        mkdir -p ${DIR} && \
+        cd ${DIR} && \
+        curl -sLO https://github.com/ultravideo/kvazaar/archive/v${KVAZAAR_VERSION}.tar.gz && \
+        tar -zx --strip-components=1 -f v${KVAZAAR_VERSION}.tar.gz && \
+        ./autogen.sh && \
+        ./configure --prefix="${PREFIX}" --disable-static --enable-shared && \
+        make -j $(nproc | awk '{print $1 / 2}') && \
+        make install && \
+        rm -rf ${DIR}
+
+RUN \
+        DIR=/tmp/aom && \
+        git clone --branch ${AOM_VERSION} --depth 1 https://aomedia.googlesource.com/aom ${DIR} ; \
+        cd ${DIR} ; \
+        rm -rf CMakeCache.txt CMakeFiles ; \
+        mkdir -p ./aom_build ; \
+        cd ./aom_build ; \
+        cmake -DCMAKE_INSTALL_PREFIX="${PREFIX}" -DBUILD_SHARED_LIBS=1 ..; \
+        make ; \
+        make install ; \
+        rm -rf ${DIR}
+
+RUN \
+        DIR=/tmp/libpthread-stubs && \
+        mkdir -p ${DIR} && \
+        cd ${DIR} && \
+        curl -sLO https://xcb.freedesktop.org/dist/libpthread-stubs-${LIBPTHREAD_STUBS_VERSION}.tar.gz && \
+        tar -zx --strip-components=1 -f libpthread-stubs-${LIBPTHREAD_STUBS_VERSION}.tar.gz && \
+        ./configure --prefix="${PREFIX}" && \
+        make -j $(nproc | awk '{print $1 / 2}') && \
+        make install && \
+        rm -rf ${DIR}
+
+## libzmq https://github.com/zeromq/libzmq/
+RUN \
+        DIR=/tmp/libzmq && \
+        mkdir -p ${DIR} && \
+        cd ${DIR} && \
+        curl -sLO https://github.com/zeromq/libzmq/archive/v${LIBZMQ_VERSION}.tar.gz && \
+        echo ${LIBZMQ_SHA256SUM} | sha256sum --check && \
+        tar -xz --strip-components=1 -f v${LIBZMQ_VERSION}.tar.gz && \
+        ./autogen.sh && \
+        ./configure --prefix="${PREFIX}" && \
+        make -j $(nproc | awk '{print $1 / 2}') && \
+        make check && \
+        make install && \
+        rm -rf ${DIR}
+
+## libsrt https://github.com/Haivision/srt
+RUN \
+        DIR=/tmp/srt && \
+        mkdir -p ${DIR} && \
+        cd ${DIR} && \
+        curl -sLO https://github.com/Haivision/srt/archive/v${LIBSRT_VERSION}.tar.gz && \
+        tar -xz --strip-components=1 -f v${LIBSRT_VERSION}.tar.gz && \
+        cmake -DCMAKE_INSTALL_PREFIX="${PREFIX}" . && \
+        make -j $(nproc | awk '{print $1 / 2}') && \
+        make install && \
+        rm -rf ${DIR}
+
+## libpng
+RUN \
+        DIR=/tmp/png && \
+        mkdir -p ${DIR} && \
+        cd ${DIR} && \
+        git clone https://git.code.sf.net/p/libpng/code ${DIR} -b v${LIBPNG_VERSION} --depth 1 && \
+        ./autogen.sh && \
+        ./configure --prefix="${PREFIX}" && \
+        make check && \
+        make install && \
+        rm -rf ${DIR}
+
+## Download ffmpeg https://ffmpeg.org/
+RUN  \
+        DIR=/tmp/ffmpeg && mkdir -p ${DIR} && cd ${DIR} && \
+        curl -sLO https://ffmpeg.org/releases/ffmpeg-${FFMPEG_VERSION}.tar.bz2 && \
+        tar -jx --strip-components=1 -f ffmpeg-${FFMPEG_VERSION}.tar.bz2 && \
+        ./configure     --disable-debug  --disable-doc    --disable-ffplay   --enable-shared --enable-gpl  --extra-libs=-ldl && \
+        make ;  make install
+
+## Build ffmpeg https://ffmpeg.org/
+RUN  \
+        DIR=/tmp/ffmpeg && cd ${DIR} && \
+        ./configure \
+        --disable-debug \
+        --disable-doc \
+        --disable-ffplay \
+        --enable-gpl \
+        --enable-libaom \
+        --enable-libass \
+        --enable-libfdk_aac \
+        --enable-libfreetype \
+        --enable-libmp3lame \
+        --enable-libopenjpeg \
+        --enable-libopus \
+        --enable-libsrt \
+        --enable-libvorbis \
+        --enable-libvpx \
+        --enable-libwebp \
+        --enable-libx264 \
+        --enable-libx265 \
+        --enable-libzmq \
+        --enable-nonfree \
+        --enable-fontconfig \
+        --enable-postproc \
+        --enable-shared \
+        --enable-version3 \
+        --extra-cflags="-I${PREFIX}/include" \
+        --extra-ldflags="-L${PREFIX}/lib" \
+        --extra-libs=-ldl \
+        --extra-libs=-lpthread \
+        --prefix="${PREFIX}" && \
+        make clean && \
+        make -j $(nproc | awk '{print $1 / 2}') && \
+        make install && \
+        make tools/zmqsend && cp tools/zmqsend ${PREFIX}/bin/ && \
+        make distclean && \
+        hash -r && \
+        cd tools && \
+        make qt-faststart && cp qt-faststart ${PREFIX}/bin/
+
+RUN \
+        ldd ${PREFIX}/bin/ffmpeg | grep opt/ffmpeg | cut -d ' ' -f 3 | xargs -i cp {} /usr/local/lib64/ && \
+        for lib in /usr/local/lib64/*.so.*; do ln -s "${lib##*/}" "${lib%%.so.*}".so; done && \
+        cp ${PREFIX}/bin/* /usr/local/bin/ && \
+        cp -r ${PREFIX}/share/ffmpeg /usr/local/share/ && \
+        LD_LIBRARY_PATH=/usr/local/lib64:/usr/local/lib ffmpeg -buildconf && \
+        cp -r ${PREFIX}/include/libav* ${PREFIX}/include/libpostproc ${PREFIX}/include/libsw* /usr/local/include && \
+        mkdir -p /usr/local/lib64/pkgconfig && \
+        for pc in ${PREFIX}/lib/pkgconfig/libav*.pc ${PREFIX}/lib/pkgconfig/libpostproc.pc ${PREFIX}/lib/pkgconfig/libsw*.pc; do \
+          sed "s:${PREFIX}:/usr/local:g" <"$pc" >/usr/local/lib64/pkgconfig/"${pc##*/}"; \
+        done
+
+FROM        base
+
+ARG FFPLAYOUT_VERSION=0.17.1
+
+ENV LD_LIBRARY_PATH=/usr/local/lib64:/usr/local/lib
+
+COPY --from=build /usr/local/ /usr/local/
+
+ADD ./overide.conf /etc/systemd/system/ffplayout.service.d/overide.conf
+
+RUN \
+    yum update -y \
+    && yum install -y wget dejavu-sans-fonts sudo \
+    && wget -q -O /tmp/ffplayout_${FFPLAYOUT_VERSION}.x86_64.rpm "https://github.com/ffplayout/ffplayout/releases/download/v${VERSION}/ffplayout-${FFPLAYOUT_VERSION}-1.x86_64.rpm" \
+    && yum install -y /tmp/ffplayout_${FFPLAYOUT_VERSION}.x86_64.rpm \
+    && yum clean all \
+    && rm /tmp/ffplayout-${FFPLAYOUT_VERSION}.x86_64.rpm \
+    && mkdir -p /home/ffpu && chown -R ffpu: /home/ffpu \
+    && systemctl enable ffplayout \
+    && systemctl enable ffpapi \
+    && ffpapi -u admin -p admin -m contact@example.com
+
+EXPOSE 8787
+
+VOLUME [ "/sys/fs/cgroup" ]
+
+CMD ["/usr/sbin/init"]
\ No newline at end of file