circuitpython/stmhal/Makefile

378 lines
9.7 KiB
Makefile

# Select the board to build for: if not given on the command line,
# then default to PYBV10.
BOARD ?= PYBV10
ifeq ($(wildcard boards/$(BOARD)/.),)
$(error Invalid BOARD specified)
endif
# If the build directory is not given, make it reflect the board name.
BUILD ?= build-$(BOARD)
include ../py/mkenv.mk
-include mpconfigport.mk
include boards/$(BOARD)/mpconfigboard.mk
# qstr definitions (must come before including py.mk)
QSTR_DEFS = qstrdefsport.h $(BUILD)/pins_qstr.h $(BUILD)/modstm_qstr.h
# include py core make definitions
include ../py/py.mk
CMSIS_DIR=cmsis
HAL_DIR=hal/$(MCU_SERIES)
USBDEV_DIR=usbdev
#USBHOST_DIR=usbhost
FATFS_DIR=lib/fatfs
DFU=../tools/dfu.py
# may need to prefix dfu-util with sudo
USE_PYDFU ?= 1
PYDFU ?= ../tools/pydfu.py
DFU_UTIL ?= dfu-util
DEVICE=0483:df11
STFLASH ?= st-flash
OPENOCD ?= openocd
OPENOCD_CONFIG ?= boards/openocd_stm32f4.cfg
CROSS_COMPILE = arm-none-eabi-
INC += -I.
INC += -I..
INC += -I$(BUILD)
INC += -I$(CMSIS_DIR)/inc
INC += -I$(CMSIS_DIR)/devinc
INC += -I$(HAL_DIR)/inc
INC += -I$(USBDEV_DIR)/core/inc -I$(USBDEV_DIR)/class/inc
#INC += -I$(USBHOST_DIR)
INC += -I../lib/mp-readline
INC += -I../lib/netutils
INC += -I../lib/timeutils
CFLAGS_CORTEX_M = -mthumb -mabi=aapcs-linux -mfpu=fpv4-sp-d16 -mfloat-abi=hard -fsingle-precision-constant -Wdouble-promotion
CFLAGS_MCU_f4 = $(CFLAGS_CORTEX_M) -mtune=cortex-m4 -mcpu=cortex-m4 -DMCU_SERIES_F4
CFLAGS_MCU_f7 = $(CFLAGS_CORTEX_M) -mtune=cortex-m7 -mcpu=cortex-m7 -DMCU_SERIES_F7
CFLAGS = $(INC) -Wall -Wpointer-arith -Werror -ansi -std=gnu99 -nostdlib $(CFLAGS_MOD)
CFLAGS += -D$(CMSIS_MCU)
CFLAGS += $(CFLAGS_MCU_$(MCU_SERIES))
CFLAGS += $(COPT)
CFLAGS += -Iboards/$(BOARD)
CFLAGS += -DSTM32_HAL_H='<stm32$(MCU_SERIES)xx_hal.h>'
LDFLAGS = -nostdlib -T $(LD_FILE) -Map=$(@:.elf=.map) --cref
LIBS =
# Remove uncalled code from the final image.
CFLAGS += -fdata-sections -ffunction-sections
LDFLAGS += --gc-sections
# Debugging/Optimization
ifeq ($(DEBUG), 1)
CFLAGS += -g -DPENDSV_DEBUG
COPT = -O0
else
COPT += -Os -DNDEBUG
endif
# uncomment this if you want libgcc
#LIBS += $(shell $(CC) -print-libgcc-file-name)
SRC_LIB = $(addprefix lib/,\
libc/string0.c \
libm/math.c \
libm/asinfacosf.c \
libm/atanf.c \
libm/atan2f.c \
libm/fmodf.c \
libm/roundf.c \
libm/log1pf.c \
libm/acoshf.c \
libm/asinhf.c \
libm/atanhf.c \
libm/kf_rem_pio2.c \
libm/kf_sin.c \
libm/kf_cos.c \
libm/kf_tan.c \
libm/ef_rem_pio2.c \
libm/erf_lgamma.c \
libm/sf_sin.c \
libm/sf_cos.c \
libm/sf_tan.c \
libm/sf_frexp.c \
libm/sf_modf.c \
libm/sf_ldexp.c \
libm/sf_erf.c \
libm/wf_lgamma.c \
libm/wf_tgamma.c \
fatfs/ff.c \
fatfs/option/ccsbcs.c \
mp-readline/readline.c \
netutils/netutils.c \
timeutils/timeutils.c \
utils/pyexec.c \
utils/printf.c \
)
SRC_C = \
main.c \
system_stm32.c \
stm32_it.c \
usbd_conf.c \
usbd_desc.c \
usbd_cdc_interface.c \
usbd_msc_storage.c \
mphalport.c \
irq.c \
pendsv.c \
systick.c \
timer.c \
led.c \
pin.c \
pin_defs_stmhal.c \
pin_named_pins.c \
bufhelper.c \
dma.c \
i2c.c \
spi.c \
uart.c \
can.c \
usb.c \
gccollect.c \
pybstdio.c \
help.c \
input.c \
modmachine.c \
modpyb.c \
modstm.c \
moduos.c \
modutime.c \
moduselect.c \
modusocket.c \
modnetwork.c \
import.c \
lexerfatfs.c \
extint.c \
usrsw.c \
rng.c \
rtc.c \
flash.c \
storage.c \
builtin_open.c \
sdcard.c \
fatfs_port.c \
lcd.c \
accel.c \
servo.c \
dac.c \
adc.c \
$(wildcard boards/$(BOARD)/*.c)
SRC_O = \
startup_stm32.o \
gchelper.o \
SRC_HAL = $(addprefix $(HAL_DIR)/src/stm32$(MCU_SERIES)xx_,\
hal.c \
hal_adc.c \
hal_adc_ex.c \
hal_can.c \
hal_cortex.c \
hal_dac.c \
hal_dac_ex.c \
hal_dma.c \
hal_flash.c \
hal_flash_ex.c \
hal_gpio.c \
hal_i2c.c \
hal_pcd.c \
hal_pcd_ex.c \
hal_pwr.c \
hal_pwr_ex.c \
hal_rcc.c \
hal_rcc_ex.c \
hal_rng.c \
hal_rtc.c \
hal_rtc_ex.c \
hal_sd.c \
hal_spi.c \
hal_tim.c \
hal_tim_ex.c \
hal_uart.c \
ll_sdmmc.c \
ll_usb.c \
)
SRC_USBDEV = $(addprefix $(USBDEV_DIR)/,\
core/src/usbd_core.c \
core/src/usbd_ctlreq.c \
core/src/usbd_ioreq.c \
class/src/usbd_cdc_msc_hid.c \
class/src/usbd_msc_bot.c \
class/src/usbd_msc_scsi.c \
class/src/usbd_msc_data.c \
)
ifeq ($(MICROPY_PY_WIZNET5K),1)
WIZNET5K_DIR=drivers/wiznet5k
INC += -I$(TOP)/$(WIZNET5K_DIR)
CFLAGS_MOD += -DMICROPY_PY_WIZNET5K=1
SRC_MOD += modnwwiznet5k.c
SRC_MOD += $(addprefix $(WIZNET5K_DIR)/,\
ethernet/w5200/w5200.c \
ethernet/wizchip_conf.c \
ethernet/socket.c \
internet/dns/dns.c \
)
endif
# for CC3000 module
ifeq ($(MICROPY_PY_CC3K),1)
CC3000_DIR=drivers/cc3000
INC += -I$(TOP)/$(CC3000_DIR)/inc
CFLAGS_MOD += -DMICROPY_PY_CC3K=1
SRC_MOD += modnwcc3k.c
SRC_MOD += $(addprefix $(CC3000_DIR)/src/,\
cc3000_common.c \
evnt_handler.c \
hci.c \
netapp.c \
nvmem.c \
security.c \
socket.c \
wlan.c \
ccspi.c \
inet_ntop.c \
inet_pton.c \
patch.c \
patch_prog.c \
)
endif
OBJ =
OBJ += $(PY_O)
OBJ += $(addprefix $(BUILD)/, $(SRC_LIB:.c=.o))
OBJ += $(addprefix $(BUILD)/, $(SRC_C:.c=.o))
OBJ += $(addprefix $(BUILD)/, $(SRC_O))
OBJ += $(addprefix $(BUILD)/, $(SRC_HAL:.c=.o))
OBJ += $(addprefix $(BUILD)/, $(SRC_USBDEV:.c=.o))
OBJ += $(addprefix $(BUILD)/, $(SRC_MOD:.c=.o))
OBJ += $(BUILD)/pins_$(BOARD).o
# We put ff.o and stm32f4xx_hal_sd.o into the first 16K section with the ISRs.
# If we compile these using -O0 then it won't fit. So if you really want these
# to be compiled with -O0, then edit stm32f405.ld (in the .isr_vector section)
# and comment out the following 2 lines.
$(BUILD)/$(FATFS_DIR)/ff.o: COPT += -Os
$(BUILD)/$(HAL_DIR)/src/stm32$(MCU_SERIES)xx_hal_sd.o: COPT += -Os
all: $(BUILD)/firmware.dfu $(BUILD)/firmware.hex
ifneq ($(FROZEN_DIR),)
CFLAGS += -DMICROPY_MODULE_FROZEN
OBJ += $(BUILD)/frozen-files.o
MAKE_FROZEN = ../tools/make-frozen.py
$(BUILD)/frozen-files.o: $(BUILD)/frozen-files.c
$(call compile_c)
$(BUILD)/frozen-files.c: $(shell find $(FROZEN_DIR) -type f)
@$(ECHO) "Creating $@"
$(Q)$(PYTHON) $(MAKE_FROZEN) $(FROZEN_DIR) > $@
endif
.PHONY: deploy
deploy: $(BUILD)/firmware.dfu
$(ECHO) "Writing $< to the board"
ifeq ($(USE_PYDFU),1)
$(Q)$(PYTHON) $(PYDFU) -u $<
else
$(Q)$(DFU_UTIL) -a 0 -d $(DEVICE) -D $<
endif
deploy-stlink: $(BUILD)/firmware.dfu
$(ECHO) "Writing $(BUILD)/firmware0.bin to the board via ST-LINK"
$(Q)$(STFLASH) write $(BUILD)/firmware0.bin 0x08000000
$(ECHO) "Writing $(BUILD)/firmware1.bin to the board via ST-LINK"
$(Q)$(STFLASH) --reset write $(BUILD)/firmware1.bin 0x08020000
deploy-openocd: $(BUILD)/firmware.dfu
$(ECHO) "Writing $(BUILD)/firmware{0,1}.bin to the board via ST-LINK using OpenOCD"
$(Q)$(OPENOCD) -f $(OPENOCD_CONFIG) -c "stm_flash $(BUILD)/firmware0.bin $(BUILD)/firmware1.bin"
$(BUILD)/firmware.dfu: $(BUILD)/firmware.elf
$(ECHO) "Create $@"
$(Q)$(OBJCOPY) -O binary -j .isr_vector $^ $(BUILD)/firmware0.bin
$(Q)$(OBJCOPY) -O binary -j .text -j .data $^ $(BUILD)/firmware1.bin
$(Q)$(PYTHON) $(DFU) -b 0x08000000:$(BUILD)/firmware0.bin -b 0x08020000:$(BUILD)/firmware1.bin $@
$(BUILD)/firmware.hex: $(BUILD)/firmware.elf
$(ECHO) "Create $@"
$(Q)$(OBJCOPY) -O ihex $< $@
$(BUILD)/firmware.elf: $(OBJ)
$(ECHO) "LINK $@"
$(Q)$(LD) $(LDFLAGS) -o $@ $^ $(LIBS)
$(Q)$(SIZE) $@
MAKE_PINS = boards/make-pins.py
BOARD_PINS = boards/$(BOARD)/pins.csv
PREFIX_FILE = boards/stm32f4xx_prefix.c
GEN_PINS_SRC = $(BUILD)/pins_$(BOARD).c
GEN_PINS_HDR = $(HEADER_BUILD)/pins.h
GEN_PINS_QSTR = $(BUILD)/pins_qstr.h
GEN_PINS_AF_CONST = $(HEADER_BUILD)/pins_af_const.h
GEN_PINS_AF_PY = $(BUILD)/pins_af.py
INSERT_USB_IDS = ../tools/insert-usb-ids.py
FILE2H = ../tools/file2h.py
USB_IDS_FILE = usb.h
CDCINF_TEMPLATE = pybcdc.inf_template
GEN_CDCINF_FILE = $(HEADER_BUILD)/pybcdc.inf
GEN_CDCINF_HEADER = $(HEADER_BUILD)/pybcdc_inf.h
# Making OBJ use an order-only depenedency on the generated pins.h file
# has the side effect of making the pins.h file before we actually compile
# any of the objects. The normal dependency generation will deal with the
# case when pins.h is modified. But when it doesn't exist, we don't know
# which source files might need it.
$(OBJ): | $(HEADER_BUILD)/pins.h
# With conditional pins, we may need to regenerate qstrdefs.h when config
# options change.
$(HEADER_BUILD)/qstrdefs.generated.h: boards/$(BOARD)/mpconfigboard.h
$(BUILD)/main.o: $(GEN_CDCINF_HEADER)
# Use a pattern rule here so that make will only call make-pins.py once to make
# both pins_$(BOARD).c and pins.h
$(BUILD)/%_$(BOARD).c $(HEADER_BUILD)/%.h $(HEADER_BUILD)/%_af_const.h $(BUILD)/%_qstr.h: boards/$(BOARD)/%.csv $(MAKE_PINS) $(AF_FILE) $(PREFIX_FILE) | $(HEADER_BUILD)
$(ECHO) "Create $@"
$(Q)$(PYTHON) $(MAKE_PINS) --board $(BOARD_PINS) --af $(AF_FILE) --prefix $(PREFIX_FILE) --hdr $(GEN_PINS_HDR) --qstr $(GEN_PINS_QSTR) --af-const $(GEN_PINS_AF_CONST) --af-py $(GEN_PINS_AF_PY) > $(GEN_PINS_SRC)
$(BUILD)/pins_$(BOARD).o: $(BUILD)/pins_$(BOARD).c
$(call compile_c)
GEN_STMCONST_HDR = $(HEADER_BUILD)/modstm_const.h
GEN_STMCONST_QSTR = $(BUILD)/modstm_qstr.h
GEN_STMCONST_MPZ = $(HEADER_BUILD)/modstm_mpz.h
CMSIS_MCU_LOWER = $(shell echo $(CMSIS_MCU) | tr '[:upper:]' '[:lower:]')
CMSIS_MCU_HDR = cmsis/devinc/$(CMSIS_MCU_LOWER).h
$(BUILD)/modstm.o: $(GEN_STMCONST_HDR)
# Use a pattern rule here so that make will only call make-stmconst.py once to
# make both modstm_const.h and modstm_qstr.h
$(HEADER_BUILD)/%_const.h $(BUILD)/%_qstr.h: $(CMSIS_MCU_HDR) make-stmconst.py | $(HEADER_BUILD)
$(ECHO) "Create stmconst $@"
$(Q)$(PYTHON) make-stmconst.py --qstr $(GEN_STMCONST_QSTR) --mpz $(GEN_STMCONST_MPZ) $(CMSIS_MCU_HDR) > $(GEN_STMCONST_HDR)
$(GEN_CDCINF_HEADER): $(GEN_CDCINF_FILE) $(FILE2H) | $(HEADER_BUILD)
$(ECHO) "Create $@"
$(Q)$(PYTHON) $(FILE2H) $< > $@
$(GEN_CDCINF_FILE): $(CDCINF_TEMPLATE) $(INSERT_USB_IDS) $(USB_IDS_FILE) | $(HEADER_BUILD)
$(ECHO) "Create $@"
$(Q)$(PYTHON) $(INSERT_USB_IDS) $(USB_IDS_FILE) $< > $@
include ../py/mkrules.mk