652 lines
31 KiB
C
652 lines
31 KiB
C
/**
|
|
******************************************************************************
|
|
* @file stm32f4xx_hal_i2c.h
|
|
* @author MCD Application Team
|
|
* @version V1.5.2
|
|
* @date 22-September-2016
|
|
* @brief Header file of I2C HAL module.
|
|
******************************************************************************
|
|
* @attention
|
|
*
|
|
* <h2><center>© COPYRIGHT(c) 2016 STMicroelectronics</center></h2>
|
|
*
|
|
* Redistribution and use in source and binary forms, with or without modification,
|
|
* are permitted provided that the following conditions are met:
|
|
* 1. Redistributions of source code must retain the above copyright notice,
|
|
* this list of conditions and the following disclaimer.
|
|
* 2. Redistributions in binary form must reproduce the above copyright notice,
|
|
* this list of conditions and the following disclaimer in the documentation
|
|
* and/or other materials provided with the distribution.
|
|
* 3. Neither the name of STMicroelectronics nor the names of its contributors
|
|
* may be used to endorse or promote products derived from this software
|
|
* without specific prior written permission.
|
|
*
|
|
* THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
|
|
* AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
|
|
* IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
|
|
* DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE
|
|
* FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
|
|
* DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
|
|
* SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
|
|
* CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
|
|
* OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
|
|
* OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
|
|
*
|
|
******************************************************************************
|
|
*/
|
|
|
|
/* Define to prevent recursive inclusion -------------------------------------*/
|
|
#ifndef __STM32F4xx_HAL_I2C_H
|
|
#define __STM32F4xx_HAL_I2C_H
|
|
|
|
#ifdef __cplusplus
|
|
extern "C" {
|
|
#endif
|
|
|
|
/* Includes ------------------------------------------------------------------*/
|
|
#include "stm32f4xx_hal_def.h"
|
|
|
|
/** @addtogroup STM32F4xx_HAL_Driver
|
|
* @{
|
|
*/
|
|
|
|
/** @addtogroup I2C
|
|
* @{
|
|
*/
|
|
|
|
/* Exported types ------------------------------------------------------------*/
|
|
/** @defgroup I2C_Exported_Types I2C Exported Types
|
|
* @{
|
|
*/
|
|
|
|
/**
|
|
* @brief I2C Configuration Structure definition
|
|
*/
|
|
typedef struct
|
|
{
|
|
uint32_t ClockSpeed; /*!< Specifies the clock frequency.
|
|
This parameter must be set to a value lower than 400kHz */
|
|
|
|
uint32_t DutyCycle; /*!< Specifies the I2C fast mode duty cycle.
|
|
This parameter can be a value of @ref I2C_duty_cycle_in_fast_mode */
|
|
|
|
uint32_t OwnAddress1; /*!< Specifies the first device own address.
|
|
This parameter can be a 7-bit or 10-bit address. */
|
|
|
|
uint32_t AddressingMode; /*!< Specifies if 7-bit or 10-bit addressing mode is selected.
|
|
This parameter can be a value of @ref I2C_addressing_mode */
|
|
|
|
uint32_t DualAddressMode; /*!< Specifies if dual addressing mode is selected.
|
|
This parameter can be a value of @ref I2C_dual_addressing_mode */
|
|
|
|
uint32_t OwnAddress2; /*!< Specifies the second device own address if dual addressing mode is selected
|
|
This parameter can be a 7-bit address. */
|
|
|
|
uint32_t GeneralCallMode; /*!< Specifies if general call mode is selected.
|
|
This parameter can be a value of @ref I2C_general_call_addressing_mode */
|
|
|
|
uint32_t NoStretchMode; /*!< Specifies if nostretch mode is selected.
|
|
This parameter can be a value of @ref I2C_nostretch_mode */
|
|
|
|
}I2C_InitTypeDef;
|
|
|
|
/**
|
|
* @brief HAL State structure definition
|
|
* @note HAL I2C State value coding follow below described bitmap :
|
|
* b7-b6 Error information
|
|
* 00 : No Error
|
|
* 01 : Abort (Abort user request on going)
|
|
* 10 : Timeout
|
|
* 11 : Error
|
|
* b5 IP initilisation status
|
|
* 0 : Reset (IP not initialized)
|
|
* 1 : Init done (IP initialized and ready to use. HAL I2C Init function called)
|
|
* b4 (not used)
|
|
* x : Should be set to 0
|
|
* b3
|
|
* 0 : Ready or Busy (No Listen mode ongoing)
|
|
* 1 : Listen (IP in Address Listen Mode)
|
|
* b2 Intrinsic process state
|
|
* 0 : Ready
|
|
* 1 : Busy (IP busy with some configuration or internal operations)
|
|
* b1 Rx state
|
|
* 0 : Ready (no Rx operation ongoing)
|
|
* 1 : Busy (Rx operation ongoing)
|
|
* b0 Tx state
|
|
* 0 : Ready (no Tx operation ongoing)
|
|
* 1 : Busy (Tx operation ongoing)
|
|
*/
|
|
typedef enum
|
|
{
|
|
HAL_I2C_STATE_RESET = 0x00U, /*!< Peripheral is not yet Initialized */
|
|
HAL_I2C_STATE_READY = 0x20U, /*!< Peripheral Initialized and ready for use */
|
|
HAL_I2C_STATE_BUSY = 0x24U, /*!< An internal process is ongoing */
|
|
HAL_I2C_STATE_BUSY_TX = 0x21U, /*!< Data Transmission process is ongoing */
|
|
HAL_I2C_STATE_BUSY_RX = 0x22U, /*!< Data Reception process is ongoing */
|
|
HAL_I2C_STATE_LISTEN = 0x28U, /*!< Address Listen Mode is ongoing */
|
|
HAL_I2C_STATE_BUSY_TX_LISTEN = 0x29U, /*!< Address Listen Mode and Data Transmission
|
|
process is ongoing */
|
|
HAL_I2C_STATE_BUSY_RX_LISTEN = 0x2AU, /*!< Address Listen Mode and Data Reception
|
|
process is ongoing */
|
|
HAL_I2C_STATE_ABORT = 0x60U, /*!< Abort user request ongoing */
|
|
HAL_I2C_STATE_TIMEOUT = 0xA0U, /*!< Timeout state */
|
|
HAL_I2C_STATE_ERROR = 0xE0U /*!< Error */
|
|
|
|
}HAL_I2C_StateTypeDef;
|
|
|
|
/**
|
|
* @brief HAL Mode structure definition
|
|
* @note HAL I2C Mode value coding follow below described bitmap :
|
|
* b7 (not used)
|
|
* x : Should be set to 0
|
|
* b6
|
|
* 0 : None
|
|
* 1 : Memory (HAL I2C communication is in Memory Mode)
|
|
* b5
|
|
* 0 : None
|
|
* 1 : Slave (HAL I2C communication is in Slave Mode)
|
|
* b4
|
|
* 0 : None
|
|
* 1 : Master (HAL I2C communication is in Master Mode)
|
|
* b3-b2-b1-b0 (not used)
|
|
* xxxx : Should be set to 0000
|
|
*/
|
|
typedef enum
|
|
{
|
|
HAL_I2C_MODE_NONE = 0x00U, /*!< No I2C communication on going */
|
|
HAL_I2C_MODE_MASTER = 0x10U, /*!< I2C communication is in Master Mode */
|
|
HAL_I2C_MODE_SLAVE = 0x20U, /*!< I2C communication is in Slave Mode */
|
|
HAL_I2C_MODE_MEM = 0x40U /*!< I2C communication is in Memory Mode */
|
|
|
|
}HAL_I2C_ModeTypeDef;
|
|
|
|
/**
|
|
* @brief I2C handle Structure definition
|
|
*/
|
|
typedef struct
|
|
{
|
|
I2C_TypeDef *Instance; /*!< I2C registers base address */
|
|
|
|
I2C_InitTypeDef Init; /*!< I2C communication parameters */
|
|
|
|
uint8_t *pBuffPtr; /*!< Pointer to I2C transfer buffer */
|
|
|
|
uint16_t XferSize; /*!< I2C transfer size */
|
|
|
|
__IO uint16_t XferCount; /*!< I2C transfer counter */
|
|
|
|
__IO uint32_t XferOptions; /*!< I2C transfer options */
|
|
|
|
__IO uint32_t PreviousState; /*!< I2C communication Previous state and mode
|
|
context for internal usage */
|
|
|
|
DMA_HandleTypeDef *hdmatx; /*!< I2C Tx DMA handle parameters */
|
|
|
|
DMA_HandleTypeDef *hdmarx; /*!< I2C Rx DMA handle parameters */
|
|
|
|
HAL_LockTypeDef Lock; /*!< I2C locking object */
|
|
|
|
__IO HAL_I2C_StateTypeDef State; /*!< I2C communication state */
|
|
|
|
__IO HAL_I2C_ModeTypeDef Mode; /*!< I2C communication mode */
|
|
|
|
__IO uint32_t ErrorCode; /*!< I2C Error code */
|
|
|
|
__IO uint32_t Devaddress; /*!< I2C Target device address */
|
|
|
|
__IO uint32_t Memaddress; /*!< I2C Target memory address */
|
|
|
|
__IO uint32_t MemaddSize; /*!< I2C Target memory address size */
|
|
|
|
__IO uint32_t EventCount; /*!< I2C Event counter */
|
|
|
|
}I2C_HandleTypeDef;
|
|
|
|
/**
|
|
* @}
|
|
*/
|
|
|
|
/* Exported constants --------------------------------------------------------*/
|
|
/** @defgroup I2C_Exported_Constants I2C Exported Constants
|
|
* @{
|
|
*/
|
|
|
|
/** @defgroup I2C_Error_Code I2C Error Code
|
|
* @brief I2C Error Code
|
|
* @{
|
|
*/
|
|
#define HAL_I2C_ERROR_NONE ((uint32_t)0x00000000U) /*!< No error */
|
|
#define HAL_I2C_ERROR_BERR ((uint32_t)0x00000001U) /*!< BERR error */
|
|
#define HAL_I2C_ERROR_ARLO ((uint32_t)0x00000002U) /*!< ARLO error */
|
|
#define HAL_I2C_ERROR_AF ((uint32_t)0x00000004U) /*!< AF error */
|
|
#define HAL_I2C_ERROR_OVR ((uint32_t)0x00000008U) /*!< OVR error */
|
|
#define HAL_I2C_ERROR_DMA ((uint32_t)0x00000010U) /*!< DMA transfer error */
|
|
#define HAL_I2C_ERROR_TIMEOUT ((uint32_t)0x00000020U) /*!< Timeout Error */
|
|
/**
|
|
* @}
|
|
*/
|
|
|
|
/** @defgroup I2C_duty_cycle_in_fast_mode I2C duty cycle in fast mode
|
|
* @{
|
|
*/
|
|
#define I2C_DUTYCYCLE_2 ((uint32_t)0x00000000U)
|
|
#define I2C_DUTYCYCLE_16_9 I2C_CCR_DUTY
|
|
/**
|
|
* @}
|
|
*/
|
|
|
|
/** @defgroup I2C_addressing_mode I2C addressing mode
|
|
* @{
|
|
*/
|
|
#define I2C_ADDRESSINGMODE_7BIT ((uint32_t)0x00004000U)
|
|
#define I2C_ADDRESSINGMODE_10BIT (I2C_OAR1_ADDMODE | ((uint32_t)0x00004000U))
|
|
/**
|
|
* @}
|
|
*/
|
|
|
|
/** @defgroup I2C_dual_addressing_mode I2C dual addressing mode
|
|
* @{
|
|
*/
|
|
#define I2C_DUALADDRESS_DISABLE ((uint32_t)0x00000000U)
|
|
#define I2C_DUALADDRESS_ENABLE I2C_OAR2_ENDUAL
|
|
/**
|
|
* @}
|
|
*/
|
|
|
|
/** @defgroup I2C_general_call_addressing_mode I2C general call addressing mode
|
|
* @{
|
|
*/
|
|
#define I2C_GENERALCALL_DISABLE ((uint32_t)0x00000000U)
|
|
#define I2C_GENERALCALL_ENABLE I2C_CR1_ENGC
|
|
/**
|
|
* @}
|
|
*/
|
|
|
|
/** @defgroup I2C_nostretch_mode I2C nostretch mode
|
|
* @{
|
|
*/
|
|
#define I2C_NOSTRETCH_DISABLE ((uint32_t)0x00000000U)
|
|
#define I2C_NOSTRETCH_ENABLE I2C_CR1_NOSTRETCH
|
|
/**
|
|
* @}
|
|
*/
|
|
|
|
/** @defgroup I2C_Memory_Address_Size I2C Memory Address Size
|
|
* @{
|
|
*/
|
|
#define I2C_MEMADD_SIZE_8BIT ((uint32_t)0x00000001U)
|
|
#define I2C_MEMADD_SIZE_16BIT ((uint32_t)0x00000010U)
|
|
/**
|
|
* @}
|
|
*/
|
|
|
|
/** @defgroup I2C_XferDirection_definition I2C XferDirection definition
|
|
* @{
|
|
*/
|
|
#define I2C_DIRECTION_RECEIVE ((uint32_t)0x00000000U)
|
|
#define I2C_DIRECTION_TRANSMIT ((uint32_t)0x00000001U)
|
|
/**
|
|
* @}
|
|
*/
|
|
|
|
/** @defgroup I2C_XferOptions_definition I2C XferOptions definition
|
|
* @{
|
|
*/
|
|
#define I2C_FIRST_FRAME ((uint32_t)0x00000001U)
|
|
#define I2C_NEXT_FRAME ((uint32_t)0x00000002U)
|
|
#define I2C_FIRST_AND_LAST_FRAME ((uint32_t)0x00000004U)
|
|
#define I2C_LAST_FRAME ((uint32_t)0x00000008U)
|
|
/**
|
|
* @}
|
|
*/
|
|
|
|
/** @defgroup I2C_Interrupt_configuration_definition I2C Interrupt configuration definition
|
|
* @{
|
|
*/
|
|
#define I2C_IT_BUF I2C_CR2_ITBUFEN
|
|
#define I2C_IT_EVT I2C_CR2_ITEVTEN
|
|
#define I2C_IT_ERR I2C_CR2_ITERREN
|
|
/**
|
|
* @}
|
|
*/
|
|
|
|
/** @defgroup I2C_Flag_definition I2C Flag definition
|
|
* @{
|
|
*/
|
|
#define I2C_FLAG_SMBALERT ((uint32_t)0x00018000U)
|
|
#define I2C_FLAG_TIMEOUT ((uint32_t)0x00014000U)
|
|
#define I2C_FLAG_PECERR ((uint32_t)0x00011000U)
|
|
#define I2C_FLAG_OVR ((uint32_t)0x00010800U)
|
|
#define I2C_FLAG_AF ((uint32_t)0x00010400U)
|
|
#define I2C_FLAG_ARLO ((uint32_t)0x00010200U)
|
|
#define I2C_FLAG_BERR ((uint32_t)0x00010100U)
|
|
#define I2C_FLAG_TXE ((uint32_t)0x00010080U)
|
|
#define I2C_FLAG_RXNE ((uint32_t)0x00010040U)
|
|
#define I2C_FLAG_STOPF ((uint32_t)0x00010010U)
|
|
#define I2C_FLAG_ADD10 ((uint32_t)0x00010008U)
|
|
#define I2C_FLAG_BTF ((uint32_t)0x00010004U)
|
|
#define I2C_FLAG_ADDR ((uint32_t)0x00010002U)
|
|
#define I2C_FLAG_SB ((uint32_t)0x00010001U)
|
|
#define I2C_FLAG_DUALF ((uint32_t)0x00100080U)
|
|
#define I2C_FLAG_SMBHOST ((uint32_t)0x00100040U)
|
|
#define I2C_FLAG_SMBDEFAULT ((uint32_t)0x00100020U)
|
|
#define I2C_FLAG_GENCALL ((uint32_t)0x00100010U)
|
|
#define I2C_FLAG_TRA ((uint32_t)0x00100004U)
|
|
#define I2C_FLAG_BUSY ((uint32_t)0x00100002U)
|
|
#define I2C_FLAG_MSL ((uint32_t)0x00100001U)
|
|
/**
|
|
* @}
|
|
*/
|
|
|
|
/**
|
|
* @}
|
|
*/
|
|
|
|
/* Exported macro ------------------------------------------------------------*/
|
|
/** @defgroup I2C_Exported_Macros I2C Exported Macros
|
|
* @{
|
|
*/
|
|
|
|
/** @brief Reset I2C handle state
|
|
* @param __HANDLE__: specifies the I2C Handle.
|
|
* This parameter can be I2C where x: 1, 2, or 3 to select the I2C peripheral.
|
|
* @retval None
|
|
*/
|
|
#define __HAL_I2C_RESET_HANDLE_STATE(__HANDLE__) ((__HANDLE__)->State = HAL_I2C_STATE_RESET)
|
|
|
|
/** @brief Enable or disable the specified I2C interrupts.
|
|
* @param __HANDLE__: specifies the I2C Handle.
|
|
* This parameter can be I2C where x: 1, 2, or 3 to select the I2C peripheral.
|
|
* @param __INTERRUPT__: specifies the interrupt source to enable or disable.
|
|
* This parameter can be one of the following values:
|
|
* @arg I2C_IT_BUF: Buffer interrupt enable
|
|
* @arg I2C_IT_EVT: Event interrupt enable
|
|
* @arg I2C_IT_ERR: Error interrupt enable
|
|
* @retval None
|
|
*/
|
|
#define __HAL_I2C_ENABLE_IT(__HANDLE__, __INTERRUPT__) ((__HANDLE__)->Instance->CR2 |= (__INTERRUPT__))
|
|
#define __HAL_I2C_DISABLE_IT(__HANDLE__, __INTERRUPT__) ((__HANDLE__)->Instance->CR2 &= (~(__INTERRUPT__)))
|
|
|
|
/** @brief Checks if the specified I2C interrupt source is enabled or disabled.
|
|
* @param __HANDLE__: specifies the I2C Handle.
|
|
* This parameter can be I2C where x: 1, 2, or 3 to select the I2C peripheral.
|
|
* @param __INTERRUPT__: specifies the I2C interrupt source to check.
|
|
* This parameter can be one of the following values:
|
|
* @arg I2C_IT_BUF: Buffer interrupt enable
|
|
* @arg I2C_IT_EVT: Event interrupt enable
|
|
* @arg I2C_IT_ERR: Error interrupt enable
|
|
* @retval The new state of __INTERRUPT__ (TRUE or FALSE).
|
|
*/
|
|
#define __HAL_I2C_GET_IT_SOURCE(__HANDLE__, __INTERRUPT__) ((((__HANDLE__)->Instance->CR2 & (__INTERRUPT__)) == (__INTERRUPT__)) ? SET : RESET)
|
|
|
|
/** @brief Checks whether the specified I2C flag is set or not.
|
|
* @param __HANDLE__: specifies the I2C Handle.
|
|
* This parameter can be I2C where x: 1, 2, or 3 to select the I2C peripheral.
|
|
* @param __FLAG__: specifies the flag to check.
|
|
* This parameter can be one of the following values:
|
|
* @arg I2C_FLAG_SMBALERT: SMBus Alert flag
|
|
* @arg I2C_FLAG_TIMEOUT: Timeout or Tlow error flag
|
|
* @arg I2C_FLAG_PECERR: PEC error in reception flag
|
|
* @arg I2C_FLAG_OVR: Overrun/Underrun flag
|
|
* @arg I2C_FLAG_AF: Acknowledge failure flag
|
|
* @arg I2C_FLAG_ARLO: Arbitration lost flag
|
|
* @arg I2C_FLAG_BERR: Bus error flag
|
|
* @arg I2C_FLAG_TXE: Data register empty flag
|
|
* @arg I2C_FLAG_RXNE: Data register not empty flag
|
|
* @arg I2C_FLAG_STOPF: Stop detection flag
|
|
* @arg I2C_FLAG_ADD10: 10-bit header sent flag
|
|
* @arg I2C_FLAG_BTF: Byte transfer finished flag
|
|
* @arg I2C_FLAG_ADDR: Address sent flag
|
|
* Address matched flag
|
|
* @arg I2C_FLAG_SB: Start bit flag
|
|
* @arg I2C_FLAG_DUALF: Dual flag
|
|
* @arg I2C_FLAG_SMBHOST: SMBus host header
|
|
* @arg I2C_FLAG_SMBDEFAULT: SMBus default header
|
|
* @arg I2C_FLAG_GENCALL: General call header flag
|
|
* @arg I2C_FLAG_TRA: Transmitter/Receiver flag
|
|
* @arg I2C_FLAG_BUSY: Bus busy flag
|
|
* @arg I2C_FLAG_MSL: Master/Slave flag
|
|
* @retval The new state of __FLAG__ (TRUE or FALSE).
|
|
*/
|
|
#define __HAL_I2C_GET_FLAG(__HANDLE__, __FLAG__) ((((uint8_t)((__FLAG__) >> 16U)) == 0x01U)?((((__HANDLE__)->Instance->SR1) & ((__FLAG__) & I2C_FLAG_MASK)) == ((__FLAG__) & I2C_FLAG_MASK)): \
|
|
((((__HANDLE__)->Instance->SR2) & ((__FLAG__) & I2C_FLAG_MASK)) == ((__FLAG__) & I2C_FLAG_MASK)))
|
|
|
|
/** @brief Clears the I2C pending flags which are cleared by writing 0 in a specific bit.
|
|
* @param __HANDLE__: specifies the I2C Handle.
|
|
* This parameter can be I2C where x: 1, 2, or 3 to select the I2C peripheral.
|
|
* @param __FLAG__: specifies the flag to clear.
|
|
* This parameter can be any combination of the following values:
|
|
* @arg I2C_FLAG_SMBALERT: SMBus Alert flag
|
|
* @arg I2C_FLAG_TIMEOUT: Timeout or Tlow error flag
|
|
* @arg I2C_FLAG_PECERR: PEC error in reception flag
|
|
* @arg I2C_FLAG_OVR: Overrun/Underrun flag (Slave mode)
|
|
* @arg I2C_FLAG_AF: Acknowledge failure flag
|
|
* @arg I2C_FLAG_ARLO: Arbitration lost flag (Master mode)
|
|
* @arg I2C_FLAG_BERR: Bus error flag
|
|
* @retval None
|
|
*/
|
|
#define __HAL_I2C_CLEAR_FLAG(__HANDLE__, __FLAG__) ((__HANDLE__)->Instance->SR1 = ~((__FLAG__) & I2C_FLAG_MASK))
|
|
|
|
/** @brief Clears the I2C ADDR pending flag.
|
|
* @param __HANDLE__: specifies the I2C Handle.
|
|
* This parameter can be I2C where x: 1, 2, or 3 to select the I2C peripheral.
|
|
* @retval None
|
|
*/
|
|
#define __HAL_I2C_CLEAR_ADDRFLAG(__HANDLE__) \
|
|
do{ \
|
|
__IO uint32_t tmpreg = 0x00U; \
|
|
tmpreg = (__HANDLE__)->Instance->SR1; \
|
|
tmpreg = (__HANDLE__)->Instance->SR2; \
|
|
UNUSED(tmpreg); \
|
|
} while(0)
|
|
|
|
/** @brief Clears the I2C STOPF pending flag.
|
|
* @param __HANDLE__: specifies the I2C Handle.
|
|
* This parameter can be I2C where x: 1, 2, or 3 to select the I2C peripheral.
|
|
* @retval None
|
|
*/
|
|
#define __HAL_I2C_CLEAR_STOPFLAG(__HANDLE__) \
|
|
do{ \
|
|
__IO uint32_t tmpreg = 0x00U; \
|
|
tmpreg = (__HANDLE__)->Instance->SR1; \
|
|
(__HANDLE__)->Instance->CR1 |= I2C_CR1_PE; \
|
|
UNUSED(tmpreg); \
|
|
} while(0)
|
|
|
|
/** @brief Enable the I2C peripheral.
|
|
* @param __HANDLE__: specifies the I2C Handle.
|
|
* This parameter can be I2Cx where x: 1 or 2 to select the I2C peripheral.
|
|
* @retval None
|
|
*/
|
|
#define __HAL_I2C_ENABLE(__HANDLE__) ((__HANDLE__)->Instance->CR1 |= I2C_CR1_PE)
|
|
|
|
/** @brief Disable the I2C peripheral.
|
|
* @param __HANDLE__: specifies the I2C Handle.
|
|
* This parameter can be I2Cx where x: 1 or 2 to select the I2C peripheral.
|
|
* @retval None
|
|
*/
|
|
#define __HAL_I2C_DISABLE(__HANDLE__) ((__HANDLE__)->Instance->CR1 &= ~I2C_CR1_PE)
|
|
|
|
/**
|
|
* @}
|
|
*/
|
|
|
|
/* Include I2C HAL Extension module */
|
|
#include "stm32f4xx_hal_i2c_ex.h"
|
|
|
|
/* Exported functions --------------------------------------------------------*/
|
|
/** @addtogroup I2C_Exported_Functions
|
|
* @{
|
|
*/
|
|
|
|
/** @addtogroup I2C_Exported_Functions_Group1
|
|
* @{
|
|
*/
|
|
/* Initialization/de-initialization functions **********************************/
|
|
HAL_StatusTypeDef HAL_I2C_Init(I2C_HandleTypeDef *hi2c);
|
|
HAL_StatusTypeDef HAL_I2C_DeInit (I2C_HandleTypeDef *hi2c);
|
|
void HAL_I2C_MspInit(I2C_HandleTypeDef *hi2c);
|
|
void HAL_I2C_MspDeInit(I2C_HandleTypeDef *hi2c);
|
|
/**
|
|
* @}
|
|
*/
|
|
|
|
/** @addtogroup I2C_Exported_Functions_Group2
|
|
* @{
|
|
*/
|
|
/* I/O operation functions *****************************************************/
|
|
/******* Blocking mode: Polling */
|
|
HAL_StatusTypeDef HAL_I2C_Master_Transmit(I2C_HandleTypeDef *hi2c, uint16_t DevAddress, uint8_t *pData, uint16_t Size, uint32_t Timeout);
|
|
HAL_StatusTypeDef HAL_I2C_Master_Receive(I2C_HandleTypeDef *hi2c, uint16_t DevAddress, uint8_t *pData, uint16_t Size, uint32_t Timeout);
|
|
HAL_StatusTypeDef HAL_I2C_Slave_Transmit(I2C_HandleTypeDef *hi2c, uint8_t *pData, uint16_t Size, uint32_t Timeout);
|
|
HAL_StatusTypeDef HAL_I2C_Slave_Receive(I2C_HandleTypeDef *hi2c, uint8_t *pData, uint16_t Size, uint32_t Timeout);
|
|
HAL_StatusTypeDef HAL_I2C_Mem_Write(I2C_HandleTypeDef *hi2c, uint16_t DevAddress, uint16_t MemAddress, uint16_t MemAddSize, uint8_t *pData, uint16_t Size, uint32_t Timeout);
|
|
HAL_StatusTypeDef HAL_I2C_Mem_Read(I2C_HandleTypeDef *hi2c, uint16_t DevAddress, uint16_t MemAddress, uint16_t MemAddSize, uint8_t *pData, uint16_t Size, uint32_t Timeout);
|
|
HAL_StatusTypeDef HAL_I2C_IsDeviceReady(I2C_HandleTypeDef *hi2c, uint16_t DevAddress, uint32_t Trials, uint32_t Timeout);
|
|
|
|
/******* Non-Blocking mode: Interrupt */
|
|
HAL_StatusTypeDef HAL_I2C_Master_Transmit_IT(I2C_HandleTypeDef *hi2c, uint16_t DevAddress, uint8_t *pData, uint16_t Size);
|
|
HAL_StatusTypeDef HAL_I2C_Master_Receive_IT(I2C_HandleTypeDef *hi2c, uint16_t DevAddress, uint8_t *pData, uint16_t Size);
|
|
HAL_StatusTypeDef HAL_I2C_Slave_Transmit_IT(I2C_HandleTypeDef *hi2c, uint8_t *pData, uint16_t Size);
|
|
HAL_StatusTypeDef HAL_I2C_Slave_Receive_IT(I2C_HandleTypeDef *hi2c, uint8_t *pData, uint16_t Size);
|
|
HAL_StatusTypeDef HAL_I2C_Mem_Write_IT(I2C_HandleTypeDef *hi2c, uint16_t DevAddress, uint16_t MemAddress, uint16_t MemAddSize, uint8_t *pData, uint16_t Size);
|
|
HAL_StatusTypeDef HAL_I2C_Mem_Read_IT(I2C_HandleTypeDef *hi2c, uint16_t DevAddress, uint16_t MemAddress, uint16_t MemAddSize, uint8_t *pData, uint16_t Size);
|
|
|
|
HAL_StatusTypeDef HAL_I2C_Master_Sequential_Transmit_IT(I2C_HandleTypeDef *hi2c, uint16_t DevAddress, uint8_t *pData, uint16_t Size, uint32_t XferOptions);
|
|
HAL_StatusTypeDef HAL_I2C_Master_Sequential_Receive_IT(I2C_HandleTypeDef *hi2c, uint16_t DevAddress, uint8_t *pData, uint16_t Size, uint32_t XferOptions);
|
|
HAL_StatusTypeDef HAL_I2C_Slave_Sequential_Transmit_IT(I2C_HandleTypeDef *hi2c, uint8_t *pData, uint16_t Size, uint32_t XferOptions);
|
|
HAL_StatusTypeDef HAL_I2C_Slave_Sequential_Receive_IT(I2C_HandleTypeDef *hi2c, uint8_t *pData, uint16_t Size, uint32_t XferOptions);
|
|
HAL_StatusTypeDef HAL_I2C_Master_Abort_IT(I2C_HandleTypeDef *hi2c, uint16_t DevAddress);
|
|
HAL_StatusTypeDef HAL_I2C_EnableListen_IT(I2C_HandleTypeDef *hi2c);
|
|
HAL_StatusTypeDef HAL_I2C_DisableListen_IT(I2C_HandleTypeDef *hi2c);
|
|
|
|
/******* Non-Blocking mode: DMA */
|
|
HAL_StatusTypeDef HAL_I2C_Master_Transmit_DMA(I2C_HandleTypeDef *hi2c, uint16_t DevAddress, uint8_t *pData, uint16_t Size);
|
|
HAL_StatusTypeDef HAL_I2C_Master_Receive_DMA(I2C_HandleTypeDef *hi2c, uint16_t DevAddress, uint8_t *pData, uint16_t Size);
|
|
HAL_StatusTypeDef HAL_I2C_Slave_Transmit_DMA(I2C_HandleTypeDef *hi2c, uint8_t *pData, uint16_t Size);
|
|
HAL_StatusTypeDef HAL_I2C_Slave_Receive_DMA(I2C_HandleTypeDef *hi2c, uint8_t *pData, uint16_t Size);
|
|
HAL_StatusTypeDef HAL_I2C_Mem_Write_DMA(I2C_HandleTypeDef *hi2c, uint16_t DevAddress, uint16_t MemAddress, uint16_t MemAddSize, uint8_t *pData, uint16_t Size);
|
|
HAL_StatusTypeDef HAL_I2C_Mem_Read_DMA(I2C_HandleTypeDef *hi2c, uint16_t DevAddress, uint16_t MemAddress, uint16_t MemAddSize, uint8_t *pData, uint16_t Size);
|
|
|
|
/******* I2C IRQHandler and Callbacks used in non blocking modes (Interrupt and DMA) */
|
|
void HAL_I2C_EV_IRQHandler(I2C_HandleTypeDef *hi2c);
|
|
void HAL_I2C_ER_IRQHandler(I2C_HandleTypeDef *hi2c);
|
|
void HAL_I2C_MasterTxCpltCallback(I2C_HandleTypeDef *hi2c);
|
|
void HAL_I2C_MasterRxCpltCallback(I2C_HandleTypeDef *hi2c);
|
|
void HAL_I2C_SlaveTxCpltCallback(I2C_HandleTypeDef *hi2c);
|
|
void HAL_I2C_SlaveRxCpltCallback(I2C_HandleTypeDef *hi2c);
|
|
void HAL_I2C_AddrCallback(I2C_HandleTypeDef *hi2c, uint8_t TransferDirection, uint16_t AddrMatchCode);
|
|
void HAL_I2C_ListenCpltCallback(I2C_HandleTypeDef *hi2c);
|
|
void HAL_I2C_MemTxCpltCallback(I2C_HandleTypeDef *hi2c);
|
|
void HAL_I2C_MemRxCpltCallback(I2C_HandleTypeDef *hi2c);
|
|
void HAL_I2C_ErrorCallback(I2C_HandleTypeDef *hi2c);
|
|
void HAL_I2C_AbortCpltCallback(I2C_HandleTypeDef *hi2c);
|
|
/**
|
|
* @}
|
|
*/
|
|
|
|
/** @addtogroup I2C_Exported_Functions_Group3
|
|
* @{
|
|
*/
|
|
/* Peripheral State, Mode and Errors functions *********************************/
|
|
HAL_I2C_StateTypeDef HAL_I2C_GetState(I2C_HandleTypeDef *hi2c);
|
|
HAL_I2C_ModeTypeDef HAL_I2C_GetMode(I2C_HandleTypeDef *hi2c);
|
|
uint32_t HAL_I2C_GetError(I2C_HandleTypeDef *hi2c);
|
|
|
|
/**
|
|
* @}
|
|
*/
|
|
|
|
/**
|
|
* @}
|
|
*/
|
|
/* Private types -------------------------------------------------------------*/
|
|
/* Private variables ---------------------------------------------------------*/
|
|
/* Private constants ---------------------------------------------------------*/
|
|
/** @defgroup I2C_Private_Constants I2C Private Constants
|
|
* @{
|
|
*/
|
|
#define I2C_FLAG_MASK ((uint32_t)0x0000FFFFU)
|
|
/**
|
|
* @}
|
|
*/
|
|
|
|
/* Private macros ------------------------------------------------------------*/
|
|
/** @defgroup I2C_Private_Macros I2C Private Macros
|
|
* @{
|
|
*/
|
|
|
|
#define I2C_FREQRANGE(__PCLK__) ((__PCLK__)/1000000U)
|
|
#define I2C_RISE_TIME(__FREQRANGE__, __SPEED__) (((__SPEED__) <= 100000U) ? ((__FREQRANGE__) + 1U) : ((((__FREQRANGE__) * 300U) / 1000U) + 1U))
|
|
#define I2C_SPEED_STANDARD(__PCLK__, __SPEED__) (((((__PCLK__)/((__SPEED__) << 1U)) & I2C_CCR_CCR) < 4U)? 4U:((__PCLK__) / ((__SPEED__) << 1U)))
|
|
#define I2C_SPEED_FAST(__PCLK__, __SPEED__, __DUTYCYCLE__) (((__DUTYCYCLE__) == I2C_DUTYCYCLE_2)? ((__PCLK__) / ((__SPEED__) * 3U)) : (((__PCLK__) / ((__SPEED__) * 25U)) | I2C_DUTYCYCLE_16_9))
|
|
#define I2C_SPEED(__PCLK__, __SPEED__, __DUTYCYCLE__) (((__SPEED__) <= 100000U)? (I2C_SPEED_STANDARD((__PCLK__), (__SPEED__))) : \
|
|
((I2C_SPEED_FAST((__PCLK__), (__SPEED__), (__DUTYCYCLE__)) & I2C_CCR_CCR) == 0U)? 1U : \
|
|
((I2C_SPEED_FAST((__PCLK__), (__SPEED__), (__DUTYCYCLE__))) | I2C_CCR_FS))
|
|
|
|
#define I2C_7BIT_ADD_WRITE(__ADDRESS__) ((uint8_t)((__ADDRESS__) & (~I2C_OAR1_ADD0)))
|
|
#define I2C_7BIT_ADD_READ(__ADDRESS__) ((uint8_t)((__ADDRESS__) | I2C_OAR1_ADD0))
|
|
|
|
#define I2C_10BIT_ADDRESS(__ADDRESS__) ((uint8_t)((uint16_t)((__ADDRESS__) & (uint16_t)(0x00FFU))))
|
|
#define I2C_10BIT_HEADER_WRITE(__ADDRESS__) ((uint8_t)((uint16_t)((uint16_t)(((uint16_t)((__ADDRESS__) & (uint16_t)(0x0300U))) >> 7U) | (uint16_t)(0x00F0U))))
|
|
#define I2C_10BIT_HEADER_READ(__ADDRESS__) ((uint8_t)((uint16_t)((uint16_t)(((uint16_t)((__ADDRESS__) & (uint16_t)(0x0300U))) >> 7U) | (uint16_t)(0x00F1U))))
|
|
|
|
#define I2C_MEM_ADD_MSB(__ADDRESS__) ((uint8_t)((uint16_t)(((uint16_t)((__ADDRESS__) & (uint16_t)(0xFF00U))) >> 8U)))
|
|
#define I2C_MEM_ADD_LSB(__ADDRESS__) ((uint8_t)((uint16_t)((__ADDRESS__) & (uint16_t)(0x00FFU))))
|
|
|
|
/** @defgroup I2C_IS_RTC_Definitions I2C Private macros to check input parameters
|
|
* @{
|
|
*/
|
|
#define IS_I2C_DUTY_CYCLE(CYCLE) (((CYCLE) == I2C_DUTYCYCLE_2) || \
|
|
((CYCLE) == I2C_DUTYCYCLE_16_9))
|
|
#define IS_I2C_ADDRESSING_MODE(ADDRESS) (((ADDRESS) == I2C_ADDRESSINGMODE_7BIT) || \
|
|
((ADDRESS) == I2C_ADDRESSINGMODE_10BIT))
|
|
#define IS_I2C_DUAL_ADDRESS(ADDRESS) (((ADDRESS) == I2C_DUALADDRESS_DISABLE) || \
|
|
((ADDRESS) == I2C_DUALADDRESS_ENABLE))
|
|
#define IS_I2C_GENERAL_CALL(CALL) (((CALL) == I2C_GENERALCALL_DISABLE) || \
|
|
((CALL) == I2C_GENERALCALL_ENABLE))
|
|
#define IS_I2C_NO_STRETCH(STRETCH) (((STRETCH) == I2C_NOSTRETCH_DISABLE) || \
|
|
((STRETCH) == I2C_NOSTRETCH_ENABLE))
|
|
#define IS_I2C_MEMADD_SIZE(SIZE) (((SIZE) == I2C_MEMADD_SIZE_8BIT) || \
|
|
((SIZE) == I2C_MEMADD_SIZE_16BIT))
|
|
#define IS_I2C_CLOCK_SPEED(SPEED) (((SPEED) > 0) && ((SPEED) <= 400000U))
|
|
#define IS_I2C_OWN_ADDRESS1(ADDRESS1) (((ADDRESS1) & (uint32_t)(0xFFFFFC00U)) == 0U)
|
|
#define IS_I2C_OWN_ADDRESS2(ADDRESS2) (((ADDRESS2) & (uint32_t)(0xFFFFFF01U)) == 0U)
|
|
#define IS_I2C_TRANSFER_OPTIONS_REQUEST(REQUEST) (((REQUEST) == I2C_FIRST_FRAME) || \
|
|
((REQUEST) == I2C_NEXT_FRAME) || \
|
|
((REQUEST) == I2C_FIRST_AND_LAST_FRAME) || \
|
|
((REQUEST) == I2C_LAST_FRAME))
|
|
/**
|
|
* @}
|
|
*/
|
|
|
|
/**
|
|
* @}
|
|
*/
|
|
|
|
/* Private functions ---------------------------------------------------------*/
|
|
/** @defgroup I2C_Private_Functions I2C Private Functions
|
|
* @{
|
|
*/
|
|
|
|
/**
|
|
* @}
|
|
*/
|
|
|
|
/**
|
|
* @}
|
|
*/
|
|
|
|
/**
|
|
* @}
|
|
*/
|
|
|
|
#ifdef __cplusplus
|
|
}
|
|
#endif
|
|
|
|
|
|
#endif /* __STM32F4xx_HAL_I2C_H */
|
|
|
|
/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/
|