circuitpython/locale/ru.po

4642 lines
127 KiB
Plaintext
Raw Blame History

This file contains ambiguous Unicode characters

This file contains Unicode characters that might be confused with other characters. If you think that this is intentional, you can safely ignore this warning. Use the Escape button to reveal them.

# SOME DESCRIPTIVE TITLE.
# Copyright (C) YEAR THE PACKAGE'S COPYRIGHT HOLDER
# This file is distributed under the same license as the PACKAGE package.
# FIRST AUTHOR <EMAIL@ADDRESS>, YEAR.
#
msgid ""
msgstr ""
"Project-Id-Version: PACKAGE VERSION\n"
"Report-Msgid-Bugs-To: \n"
"PO-Revision-Date: 2022-04-06 13:37+0000\n"
"Last-Translator: Jeff Epler <jepler@gmail.com>\n"
"Language-Team: none\n"
"Language: ru\n"
"MIME-Version: 1.0\n"
"Content-Type: text/plain; charset=UTF-8\n"
"Content-Transfer-Encoding: 8bit\n"
"Plural-Forms: nplurals=3; plural=n%10==1 && n%100!=11 ? 0 : n%10>=2 && n"
"%10<=4 && (n%100<10 || n%100>=20) ? 1 : 2;\n"
"X-Generator: Weblate 4.12-dev\n"
#: main.c
msgid ""
"\n"
"Code done running.\n"
msgstr ""
"\n"
"Программа закончила выполнение.\n"
#: main.c
msgid ""
"\n"
"Code stopped by auto-reload. Reloading soon.\n"
msgstr ""
#: supervisor/shared/safe_mode.c
msgid ""
"\n"
"Please file an issue with the contents of your CIRCUITPY drive at \n"
"https://github.com/adafruit/circuitpython/issues\n"
msgstr ""
"\n"
"Пожалуйста, сообщите о проблеме, приложив содержимое вашего диска CIRCUITPY "
"на\n"
"https://github.com/adafruit/circuitpython/issues\n"
#: py/obj.c
msgid " File \"%q\""
msgstr " Файл \"%q\""
#: py/obj.c
msgid " File \"%q\", line %d"
msgstr " Файл \"%q\", строка %d"
#: py/builtinhelp.c
msgid " is of type %q\n"
msgstr " имеет тип %q\n"
#: main.c
msgid " not found.\n"
msgstr " не найден.\n"
#: main.c
msgid " output:\n"
msgstr " вывод:\n"
#: py/objstr.c
#, c-format
msgid "%%c requires int or char"
msgstr "%%c требует int или char"
#: shared-bindings/rgbmatrix/RGBMatrix.c
#, c-format
msgid ""
"%d address pins, %d rgb pins and %d tiles indicate a height of %d, not %d"
msgstr "%d адресные пины, %d rgb пины и %d плитки указывают высоту %d а не %d"
#: ports/cxd56/common-hal/analogio/AnalogOut.c ports/cxd56/common-hal/rtc/RTC.c
#: ports/espressif/common-hal/rtc/RTC.c
#: ports/mimxrt10xx/common-hal/analogio/AnalogOut.c
#: ports/mimxrt10xx/common-hal/rtc/RTC.c
#: ports/nrf/common-hal/analogio/AnalogOut.c ports/nrf/common-hal/rtc/RTC.c
#: ports/raspberrypi/common-hal/analogio/AnalogOut.c
#: ports/raspberrypi/common-hal/rtc/RTC.c ports/stm/common-hal/rtc/RTC.c
msgid "%q"
msgstr ""
#: shared-bindings/microcontroller/Pin.c
msgid "%q and %q contain duplicate pins"
msgstr "%q и %q содержат пины-дупликаты"
#: ports/atmel-samd/common-hal/audioio/AudioOut.c
msgid "%q and %q must be different"
msgstr ""
#: shared-bindings/microcontroller/Pin.c
msgid "%q contains duplicate pins"
msgstr "%q содержит пины-дупликаты"
#: ports/atmel-samd/common-hal/sdioio/SDCard.c
msgid "%q failure: %d"
msgstr "%q сбой: %d"
#: shared-bindings/microcontroller/Pin.c
msgid "%q in use"
msgstr "%q используется"
#: py/obj.c py/objstr.c py/objstrunicode.c
msgid "%q index out of range"
msgstr "Индекс %q вне диапазона"
#: py/obj.c
msgid "%q indices must be integers, not %s"
msgstr "Индексы %q должны быть целыми числами, а не %s"
#: shared-module/bitbangio/SPI.c
msgid "%q init failed"
msgstr ""
#: py/argcheck.c
msgid "%q length must be %d"
msgstr ""
#: py/argcheck.c
msgid "%q length must be %d-%d"
msgstr "Длинна %q должна быть %d-%d"
#: py/argcheck.c
msgid "%q length must be <= %d"
msgstr ""
#: py/argcheck.c
msgid "%q length must be >= %d"
msgstr ""
#: shared-bindings/busio/I2C.c
msgid "%q length must be >= 1"
msgstr "Длинна %q должна быть >= 1"
#: py/argcheck.c
msgid "%q must be %d"
msgstr ""
#: py/argcheck.c
msgid "%q must be %d-%d"
msgstr "%q должен быть %d-%d"
#: shared-bindings/displayio/Display.c
msgid "%q must be 1 when %q is True"
msgstr ""
#: py/argcheck.c shared-bindings/gifio/GifWriter.c
msgid "%q must be <= %d"
msgstr "%q должен быть <= %d"
#: py/argcheck.c
msgid "%q must be >= %d"
msgstr "%q должен быть >= %d"
#: py/argcheck.c
msgid "%q must be >= 0"
msgstr "%q должен быть >= 0"
#: shared-bindings/vectorio/Circle.c shared-bindings/vectorio/Rectangle.c
msgid "%q must be >= 1"
msgstr "%q должен быть >= 1"
#: py/argcheck.c
msgid "%q must be a string"
msgstr "%q должен быть строкой"
#: py/argcheck.c
msgid "%q must be an int"
msgstr ""
#: py/argcheck.c
msgid "%q must be of type %q"
msgstr "%q должен быть типа %q"
#: shared-bindings/digitalio/Pull.c
msgid "%q must be of type %q or None"
msgstr ""
#: ports/atmel-samd/common-hal/busio/UART.c
msgid "%q must be power of 2"
msgstr "%q должен быть во 2-й степени"
#: shared-bindings/wifi/Monitor.c
msgid "%q out of bounds"
msgstr "%q за пределом"
#: ports/atmel-samd/common-hal/pulseio/PulseIn.c
#: ports/cxd56/common-hal/pulseio/PulseIn.c
#: ports/nrf/common-hal/pulseio/PulseIn.c
#: ports/raspberrypi/common-hal/rp2pio/StateMachine.c
#: ports/stm/common-hal/pulseio/PulseIn.c py/argcheck.c
#: shared-bindings/canio/Match.c
msgid "%q out of range"
msgstr "%q вне диапазона"
#: ports/atmel-samd/common-hal/microcontroller/Pin.c
msgid "%q pin invalid"
msgstr "Пин %q не допустим"
#: shared-bindings/usb_hid/Device.c
msgid "%q with a report ID of 0 must be of length 1"
msgstr "%q с идентификатором отчёта 0 должен иметь длину 1"
#: py/bc.c py/objnamedtuple.c
msgid "%q() takes %d positional arguments but %d were given"
msgstr "%q() принимает %d позиционных аргументов, но было передано %d"
#: shared-bindings/usb_hid/Device.c
msgid "%q, %q, and %q must all be the same length"
msgstr "%q, %q, и %q должны быть одной длинны"
#: py/objint.c
msgid "%q=%q"
msgstr ""
#: ports/espressif/common-hal/espidf/__init__.c ports/espressif/esp_error.c
#, c-format
msgid "%s error 0x%x"
msgstr "%s ошибка 0x%x"
#: py/argcheck.c
msgid "'%q' argument required"
msgstr "Требуется аргумент '%q'"
#: py/proto.c
msgid "'%q' object does not support '%q'"
msgstr "Объект '%q' не поддерживает '%q'"
#: py/runtime.c
msgid "'%q' object is not an iterator"
msgstr "Объект '%q' не является итератором"
#: py/objtype.c py/runtime.c shared-module/atexit/__init__.c
msgid "'%q' object is not callable"
msgstr "Объект '%q' не является вызываемым"
#: py/runtime.c
msgid "'%q' object is not iterable"
msgstr "Объект '%q' не является итерируемым"
#: py/emitinlinethumb.c py/emitinlinextensa.c
#, c-format
msgid "'%s' expects a label"
msgstr "'%s' ожидает метку"
#: py/emitinlinethumb.c py/emitinlinextensa.c
#, c-format
msgid "'%s' expects a register"
msgstr "'%s' ожидает регистр"
#: py/emitinlinethumb.c
#, c-format
msgid "'%s' expects a special register"
msgstr "'%s' ожидает специальный регистр"
#: py/emitinlinethumb.c
#, c-format
msgid "'%s' expects an FPU register"
msgstr "'%s' ожидает регистр FPU"
#: py/emitinlinethumb.c
#, c-format
msgid "'%s' expects an address of the form [a, b]"
msgstr "'%s' ожидает адрес в формате [a, b]"
#: py/emitinlinethumb.c py/emitinlinextensa.c
#, c-format
msgid "'%s' expects an integer"
msgstr "'%s' ожидает целое число"
#: py/emitinlinethumb.c
#, c-format
msgid "'%s' expects at most r%d"
msgstr "'%s' ожидает не более r%d"
#: py/emitinlinethumb.c
#, c-format
msgid "'%s' expects {r0, r1, ...}"
msgstr "'%s' ожидает {r0, r1, ...}"
#: py/emitinlinextensa.c
#, c-format
msgid "'%s' integer %d isn't within range %d..%d"
msgstr "'%s' целое число %d не находится в пределах диапазона %d..%d"
#: py/emitinlinethumb.c
#, c-format
msgid "'%s' integer 0x%x doesn't fit in mask 0x%x"
msgstr "'%s' целое число 0x%x не помещается в маску 0x%x"
#: py/obj.c
#, c-format
msgid "'%s' object doesn't support item assignment"
msgstr "Объект '%s' не поддерживает присвоение элементов"
#: py/obj.c
#, c-format
msgid "'%s' object doesn't support item deletion"
msgstr "Объект '%s' не поддерживает удаление элементов"
#: py/runtime.c
msgid "'%s' object has no attribute '%q'"
msgstr "Объект '%s' не имеет атрибута '%q'"
#: py/obj.c
#, c-format
msgid "'%s' object isn't subscriptable"
msgstr "Объект '%s' не может быть подписан"
#: py/objstr.c
msgid "'=' alignment not allowed in string format specifier"
msgstr "Выравнивание '=' недопустимо в спецификаторе формата строки"
#: shared-module/struct/__init__.c
msgid "'S' and 'O' are not supported format types"
msgstr "'S' и 'O' не являются поддерживаемыми типами форматов"
#: py/compile.c
msgid "'align' requires 1 argument"
msgstr "'align' требует 1 аргумент"
#: py/compile.c
msgid "'await' outside function"
msgstr "'await' вне функции"
#: py/compile.c
msgid "'await', 'async for' or 'async with' outside async function"
msgstr "'await', 'async for' или 'async with' вне асинхронной функции"
#: py/compile.c
msgid "'break' outside loop"
msgstr "'break' вне цикла"
#: py/compile.c
msgid "'continue' outside loop"
msgstr "'continue' вне цикла"
#: py/objgenerator.c
msgid "'coroutine' object is not an iterator"
msgstr "Объект 'coroutine' не является итератором"
#: py/compile.c
msgid "'data' requires at least 2 arguments"
msgstr "'data' требует как минимум 2 аргумента"
#: py/compile.c
msgid "'data' requires integer arguments"
msgstr "'data' требует целочисленных аргументов"
#: py/compile.c
msgid "'label' requires 1 argument"
msgstr "'label' требует 1 аргумент"
#: py/compile.c
msgid "'return' outside function"
msgstr "'return' вне функции"
#: py/compile.c
msgid "'yield from' inside async function"
msgstr "'yield from' внутри асинхронной функции"
#: py/compile.c
msgid "'yield' outside function"
msgstr "'yield' вне функции"
#: py/compile.c
msgid "*x must be assignment target"
msgstr "*x должно быть целью назначения"
#: py/obj.c
msgid ", in %q\n"
msgstr ", в %q\n"
#: py/objcomplex.c
msgid "0.0 to a complex power"
msgstr "0.0 в комплексную степень"
#: py/modbuiltins.c
msgid "3-arg pow() not supported"
msgstr "3-аргументный pow() не поддерживается"
#: shared-module/msgpack/__init__.c
msgid "64 bit types"
msgstr "64-битные типы"
#: ports/atmel-samd/common-hal/alarm/pin/PinAlarm.c
#: ports/atmel-samd/common-hal/countio/Counter.c
#: ports/atmel-samd/common-hal/rotaryio/IncrementalEncoder.c
msgid "A hardware interrupt channel is already in use"
msgstr "Канал аппаратного прерывания уже используется"
#: ports/espressif/common-hal/analogio/AnalogIn.c
msgid "ADC2 is being used by WiFi"
msgstr "ADC2 используется WiFi"
#: shared-bindings/_bleio/Address.c shared-bindings/ipaddress/IPv4Address.c
#, c-format
msgid "Address must be %d bytes long"
msgstr "Адрес должен быть длиной %d байт"
#: ports/espressif/common-hal/canio/CAN.c
msgid "All CAN peripherals are in use"
msgstr "Все периферийные устройства CAN уже используются"
#: ports/espressif/common-hal/busio/I2C.c ports/nrf/common-hal/busio/I2C.c
msgid "All I2C peripherals are in use"
msgstr "Все периферийные устройства I2C уже используются"
#: ports/espressif/common-hal/i2ctarget/I2CTarget.c
msgid "All I2C targets are in use"
msgstr ""
#: ports/espressif/common-hal/countio/Counter.c
#: ports/espressif/common-hal/frequencyio/FrequencyIn.c
#: ports/espressif/common-hal/rotaryio/IncrementalEncoder.c
msgid "All PCNT units in use"
msgstr "Все блоки PCNT уже используются"
#: ports/atmel-samd/common-hal/canio/Listener.c
#: ports/espressif/common-hal/canio/Listener.c
#: ports/stm/common-hal/canio/Listener.c
msgid "All RX FIFOs in use"
msgstr "Все RX FIFO уже используются"
#: ports/espressif/common-hal/busio/SPI.c ports/nrf/common-hal/busio/SPI.c
msgid "All SPI peripherals are in use"
msgstr "Все периферийные устройства SPI уже используются"
#: ports/espressif/common-hal/busio/UART.c ports/nrf/common-hal/busio/UART.c
#: ports/raspberrypi/common-hal/busio/UART.c
msgid "All UART peripherals are in use"
msgstr "Все периферийные устройства UART уже используются"
#: ports/nrf/common-hal/countio/Counter.c
#: ports/nrf/common-hal/pulseio/PulseIn.c
#: ports/nrf/common-hal/rotaryio/IncrementalEncoder.c
#: shared-bindings/pwmio/PWMOut.c
msgid "All channels in use"
msgstr "Все каналы уже используются"
#: ports/atmel-samd/common-hal/audioio/AudioOut.c
msgid "All event channels in use"
msgstr "Все каналы событий уже используются"
#: ports/raspberrypi/common-hal/rp2pio/StateMachine.c
msgid "All state machines in use"
msgstr "Все машины состояний уже используются"
#: ports/atmel-samd/audio_dma.c
msgid "All sync event channels in use"
msgstr "Все каналы событий синхронизации уже используются"
#: shared-bindings/pwmio/PWMOut.c
msgid "All timers for this pin are in use"
msgstr "Все таймеры для этого пина уже используются"
#: ports/atmel-samd/common-hal/_pew/PewPew.c
#: ports/atmel-samd/common-hal/audioio/AudioOut.c
#: ports/atmel-samd/common-hal/frequencyio/FrequencyIn.c
#: ports/atmel-samd/common-hal/pulseio/PulseIn.c
#: ports/atmel-samd/common-hal/pulseio/PulseOut.c
#: ports/cxd56/common-hal/pulseio/PulseOut.c
#: ports/espressif/common-hal/frequencyio/FrequencyIn.c
#: ports/espressif/common-hal/neopixel_write/__init__.c
#: ports/espressif/common-hal/pulseio/PulseIn.c
#: ports/espressif/common-hal/pulseio/PulseOut.c
#: ports/nrf/common-hal/audiopwmio/PWMAudioOut.c
#: ports/nrf/common-hal/pulseio/PulseIn.c ports/nrf/peripherals/nrf/timers.c
#: ports/raspberrypi/common-hal/audiopwmio/PWMAudioOut.c
#: ports/stm/peripherals/timers.c shared-bindings/pwmio/PWMOut.c
msgid "All timers in use"
msgstr "Все таймеры уже используются"
#: ports/espressif/common-hal/_bleio/Adapter.c
#: ports/nrf/common-hal/_bleio/Adapter.c
msgid "Already advertising."
msgstr "Уже объявляемся (advertising)."
#: ports/atmel-samd/common-hal/canio/Listener.c
msgid "Already have all-matches listener"
msgstr "Уже есть универсальный слушатель"
#: shared-module/memorymonitor/AllocationAlarm.c
#: shared-module/memorymonitor/AllocationSize.c
msgid "Already running"
msgstr "Уже запущен"
#: ports/espressif/common-hal/wifi/Radio.c
msgid "Already scanning for wifi networks"
msgstr "Поиск сетей wifi уже происходит"
#: ports/stm/common-hal/audiopwmio/PWMAudioOut.c
msgid "Another PWMAudioOut is already active"
msgstr "Другой PWMAudioOut уже активен"
#: ports/atmel-samd/common-hal/pulseio/PulseOut.c
#: ports/cxd56/common-hal/pulseio/PulseOut.c
msgid "Another send is already active"
msgstr "Другая передача уже активна"
#: shared-bindings/pulseio/PulseOut.c
msgid "Array must contain halfwords (type 'H')"
msgstr "Массив должен содержать полуслова (тип 'H')"
#: shared-bindings/alarm/SleepMemory.c shared-bindings/nvm/ByteArray.c
msgid "Array values should be single bytes."
msgstr "Значения массива должны быть однобайтовыми."
#: shared-bindings/microcontroller/Pin.c
msgid "At most %d %q may be specified (not %d)"
msgstr "Может быть указано не более %d %q (не %d)"
#: shared-module/memorymonitor/AllocationAlarm.c
#, c-format
msgid "Attempt to allocate %d blocks"
msgstr "Попытка выделения %d блоков"
#: supervisor/shared/safe_mode.c
msgid "Attempted heap allocation when VM not running."
msgstr "Попытка выделения heap пока виртуальная машина не запущена."
#: ports/raspberrypi/audio_dma.c
msgid "Audio conversion not implemented"
msgstr "Преобразование звука не реализовано"
#: shared-bindings/wifi/Radio.c
msgid "AuthMode.OPEN is not used with password"
msgstr "AuthMode.OPEN не используется с паролем"
#: shared-bindings/wifi/Radio.c supervisor/shared/web_workflow/web_workflow.c
msgid "Authentication failure"
msgstr "Ошибка аутентификации"
#: main.c
msgid "Auto-reload is off.\n"
msgstr "Автоматическая перезагрузка отключена.\n"
#: main.c
msgid ""
"Auto-reload is on. Simply save files over USB to run them or enter REPL to "
"disable.\n"
msgstr ""
"Автоматическая перезагрузка включена. Просто сохрани файл по USB или зайди в "
"REPL чтобы отключить.\n"
#: ports/espressif/common-hal/canio/CAN.c
msgid "Baudrate not supported by peripheral"
msgstr ""
"Скорость обмена данными (Baudrate) не поддерживается периферийным устройством"
#: shared-module/displayio/Display.c
#: shared-module/framebufferio/FramebufferDisplay.c
msgid "Below minimum frame rate"
msgstr "Ниже минимальной частоты кадров"
#: ports/raspberrypi/common-hal/audiobusio/I2SOut.c
msgid "Bit clock and word select must be sequential pins"
msgstr ""
"Битовый тактовый генератор и выбор слова должны быть последовательными пинами"
#: ports/atmel-samd/common-hal/audiobusio/I2SOut.c
msgid "Bit clock and word select must share a clock unit"
msgstr ""
"Битовый тактовый генератор и выбор слова должны использовать один источник "
"тактирования"
#: shared-bindings/audiobusio/PDMIn.c
msgid "Bit depth must be multiple of 8."
msgstr "Битовая глубина должна быть кратна 8."
#: shared-bindings/bitmaptools/__init__.c
msgid "Bitmap size and bits per value must match"
msgstr "Размер bitmap и количество бит-на-значение должны совпадать"
#: supervisor/shared/safe_mode.c
msgid "Boot device must be first device (interface #0)."
msgstr "Загрузочное устройство должно быть первым устройством (интерфейс #0)."
#: ports/mimxrt10xx/common-hal/busio/UART.c
msgid "Both RX and TX required for flow control"
msgstr "Для управления потоком требуется как RX, так и TX"
#: ports/atmel-samd/common-hal/rotaryio/IncrementalEncoder.c
msgid "Both pins must support hardware interrupts"
msgstr "Оба пина должны поддерживать аппаратные прерывания"
#: shared-bindings/displayio/Display.c
#: shared-bindings/framebufferio/FramebufferDisplay.c
#: shared-bindings/is31fl3741/FrameBuffer.c
#: shared-bindings/rgbmatrix/RGBMatrix.c
msgid "Brightness must be 0-1.0"
msgstr "Яркость должна быть в диапазоне от 0 до 1.0"
#: shared-bindings/displayio/Display.c
#: shared-bindings/framebufferio/FramebufferDisplay.c
msgid "Brightness not adjustable"
msgstr "Яркость не регулируется"
#: shared-bindings/_bleio/UUID.c
#, c-format
msgid "Buffer + offset too small %d %d %d"
msgstr "Буфер + сдвиг слишком малы %d %d %d"
#: ports/raspberrypi/bindings/rp2pio/StateMachine.c
msgid "Buffer elements must be 4 bytes long or less"
msgstr "Элементы буфера должны иметь длину не более 4 байт"
#: shared-bindings/framebufferio/FramebufferDisplay.c
msgid "Buffer is not a bytearray."
msgstr "Буфер не является байтовым массивом (bytearray)."
#: ports/cxd56/common-hal/camera/Camera.c shared-bindings/displayio/Display.c
#: shared-bindings/framebufferio/FramebufferDisplay.c
msgid "Buffer is too small"
msgstr "Буфер слишком мал"
#: ports/stm/common-hal/audiopwmio/PWMAudioOut.c
#, c-format
msgid "Buffer length %d too big. It must be less than %d"
msgstr "Размер буфера %d слишком большой. Он должен быть меньше чем %d"
#: ports/atmel-samd/common-hal/sdioio/SDCard.c
#: ports/cxd56/common-hal/sdioio/SDCard.c shared-module/sdcardio/SDCard.c
msgid "Buffer length must be a multiple of 512"
msgstr "Размер буфера должен быть кратен 512"
#: ports/stm/common-hal/sdioio/SDCard.c shared-bindings/floppyio/__init__.c
msgid "Buffer must be a multiple of 512 bytes"
msgstr "Буфер должен быть кратен 512"
#: shared-bindings/_bleio/PacketBuffer.c
#, c-format
msgid "Buffer too short by %d bytes"
msgstr "Буфер слишком короткий на %d байт"
#: ports/espressif/common-hal/imagecapture/ParallelImageCapture.c
msgid "Buffers must be same size"
msgstr "Буферы должны быть одинакового размера"
#: ports/atmel-samd/common-hal/paralleldisplay/ParallelBus.c
#: ports/espressif/common-hal/paralleldisplay/ParallelBus.c
#: ports/nrf/common-hal/paralleldisplay/ParallelBus.c
#: ports/raspberrypi/common-hal/paralleldisplay/ParallelBus.c
#, c-format
msgid "Bus pin %d is already in use"
msgstr "Пин шины %d уже используется"
#: shared-bindings/_bleio/UUID.c
msgid "Byte buffer must be 16 bytes."
msgstr "Буфер байтов должен быть размером 16 байтам."
#: shared-bindings/aesio/aes.c
msgid "CBC blocks must be multiples of 16 bytes"
msgstr "Блоки CBC должны быть кратны 16 байтам"
#: supervisor/shared/safe_mode.c
msgid "CIRCUITPY drive could not be found or created."
msgstr ""
#: ports/espressif/common-hal/espidf/__init__.c ports/espressif/esp_error.c
msgid "CRC or checksum was invalid"
msgstr "CRC или контрольная сумма неправильная"
#: py/objtype.c
msgid "Call super().__init__() before accessing native object."
msgstr "Вызовите super().__init__() перед обращением к родному объекту."
#: ports/cxd56/common-hal/camera/Camera.c
msgid "Camera init"
msgstr ""
#: ports/espressif/common-hal/alarm/pin/PinAlarm.c
msgid "Can only alarm on RTC IO from deep sleep."
msgstr "Сигнал из глубокого сна может подаваться только на пине RTC IO."
#: ports/espressif/common-hal/alarm/pin/PinAlarm.c
msgid "Can only alarm on one low pin while others alarm high from deep sleep."
msgstr ""
"Сигнал из глубокого сна может подаваться по низкому уровню только на одном "
"пане, пока остальные подают сигнал по высокому уровню."
#: ports/espressif/common-hal/alarm/pin/PinAlarm.c
msgid "Can only alarm on two low pins from deep sleep."
msgstr ""
"Сигнал из глубокого сна может подаваться только на двух пинах по низкому "
"уровню."
#: ports/espressif/common-hal/_bleio/Characteristic.c
#: ports/nrf/common-hal/_bleio/Characteristic.c
msgid "Can't set CCCD on local Characteristic"
msgstr "Невозможно установить CCCD на локальную Characteristic"
#: shared-bindings/storage/__init__.c shared-bindings/usb_cdc/__init__.c
#: shared-bindings/usb_hid/__init__.c shared-bindings/usb_midi/__init__.c
msgid "Cannot change USB devices now"
msgstr "Сейчас невозможно изменить USB-устройства"
#: shared-bindings/_bleio/Adapter.c
msgid "Cannot create a new Adapter; use _bleio.adapter;"
msgstr "Невозможно создать новый Adapter; используйте _bleio.adapter;"
#: shared-bindings/displayio/Bitmap.c
#: shared-bindings/memorymonitor/AllocationSize.c
#: shared-bindings/pulseio/PulseIn.c
msgid "Cannot delete values"
msgstr "Невозможно удалить значения"
#: ports/atmel-samd/common-hal/digitalio/DigitalInOut.c
#: ports/mimxrt10xx/common-hal/digitalio/DigitalInOut.c
#: ports/nrf/common-hal/digitalio/DigitalInOut.c
#: ports/raspberrypi/common-hal/digitalio/DigitalInOut.c
msgid "Cannot get pull while in output mode"
msgstr "Невозможно установить подтяжку в режиме output"
#: ports/nrf/common-hal/microcontroller/Processor.c
msgid "Cannot get temperature"
msgstr "Невозможно получить температуру"
#: shared-bindings/_bleio/Adapter.c
msgid "Cannot have scan responses for extended, connectable advertisements."
msgstr ""
"Невозможно иметь ответы сканирования для расширенных, подключаемых "
"объявлений (advertisements)."
#: ports/espressif/common-hal/alarm/pin/PinAlarm.c
msgid "Cannot pull on input-only pin."
msgstr ""
"Невозможно установить подтяжку на пине, предназначенном только для ввода."
#: shared-bindings/audiobusio/PDMIn.c
msgid "Cannot record to a file"
msgstr "Невозможно записать в файл"
#: shared-module/storage/__init__.c
msgid "Cannot remount '/' when visible via USB."
msgstr "Невозможно перемонтировать '/' пока он виден через USB."
#: ports/atmel-samd/common-hal/microcontroller/__init__.c
#: ports/cxd56/common-hal/microcontroller/__init__.c
#: ports/mimxrt10xx/common-hal/microcontroller/__init__.c
msgid "Cannot reset into bootloader because no bootloader is present"
msgstr ""
#: ports/espressif/common-hal/socketpool/Socket.c
msgid "Cannot set socket options"
msgstr "Невозможно установить параметры сокета"
#: shared-bindings/digitalio/DigitalInOut.c
msgid "Cannot set value when direction is input."
msgstr "Невозможно установить значение в режиме input."
#: ports/espressif/common-hal/busio/UART.c
#: ports/mimxrt10xx/common-hal/busio/UART.c
msgid "Cannot specify RTS or CTS in RS485 mode"
msgstr "Невозможно указать RTS или CTS в режиме RS485"
#: py/objslice.c
msgid "Cannot subclass slice"
msgstr "Срез субкласса невозможен"
#: shared-module/bitbangio/SPI.c
msgid "Cannot transfer without MOSI and MISO pins"
msgstr ""
#: shared-bindings/pwmio/PWMOut.c
msgid "Cannot vary frequency on a timer that is already in use"
msgstr "Невозможно изменить частоту на таймере, который уже используется"
#: ports/nrf/common-hal/alarm/pin/PinAlarm.c
msgid "Cannot wake on pin edge, only level"
msgstr ""
#: ports/espressif/common-hal/alarm/pin/PinAlarm.c
msgid "Cannot wake on pin edge. Only level."
msgstr "Невозможно проснуться по спаду/росту на пине. Только по уровню."
#: shared-bindings/_bleio/CharacteristicBuffer.c
msgid "CharacteristicBuffer writing not provided"
msgstr "Запись в CharacteristicBuffer не предусмотрена"
#: supervisor/shared/safe_mode.c
msgid "CircuitPython core code crashed hard. Whoops!\n"
msgstr "Код ядра CircuitPython сильно крашнулся. Упс!\n"
#: supervisor/shared/safe_mode.c
msgid "CircuitPython was unable to allocate the heap."
msgstr "CircuitPython не смог выделить heap."
#: shared-module/bitbangio/I2C.c
msgid "Clock stretch too long"
msgstr "Длинна такта слишком велика"
#: ports/atmel-samd/common-hal/audiobusio/I2SOut.c
msgid "Clock unit in use"
msgstr "Источник тактирования уже используется"
#: shared-bindings/_bleio/Connection.c
msgid ""
"Connection has been disconnected and can no longer be used. Create a new "
"connection."
msgstr ""
"Соединение было отключено и больше не может использоваться. Создайте новое "
"соединение."
#: py/persistentcode.c
msgid "Corrupt .mpy file"
msgstr "Файл .mpy поврежден"
#: ports/espressif/common-hal/neopixel_write/__init__.c
msgid "Could not retrieve clock"
msgstr "Не удалось извлечь тактирование"
#: shared-bindings/_bleio/Adapter.c
msgid "Could not set address"
msgstr "Не удалось задать адрес"
#: shared-bindings/pwmio/PWMOut.c
msgid "Could not start PWM"
msgstr "Не удалось запустить ШИМ"
#: ports/stm/common-hal/busio/UART.c
msgid "Could not start interrupt, RX busy"
msgstr "Не удалось запустить прерывание, RX занят"
#: shared-module/audiomp3/MP3Decoder.c
msgid "Couldn't allocate decoder"
msgstr "Не удалось выделить место для декодера"
#: supervisor/shared/safe_mode.c
msgid "Crash into the HardFault_Handler."
msgstr "Крашнулся в HardFault_Handler."
#: ports/stm/common-hal/analogio/AnalogOut.c
msgid "DAC Channel Init Error"
msgstr "Ошибка инициализации канала ЦАП"
#: ports/stm/common-hal/analogio/AnalogOut.c
msgid "DAC Device Init Error"
msgstr "Ошибка инициализации устройства ЦАП"
#: ports/atmel-samd/common-hal/audioio/AudioOut.c
msgid "DAC already in use"
msgstr "ЦАП уже используется"
#: ports/atmel-samd/common-hal/paralleldisplay/ParallelBus.c
#: ports/nrf/common-hal/paralleldisplay/ParallelBus.c
msgid "Data 0 pin must be byte aligned"
msgstr "Пин data 0 должен быть байтово выровнен"
#: shared-module/audiocore/WaveFile.c
msgid "Data chunk must follow fmt chunk"
msgstr "Блок данных должен следовать за блоком fmt"
#: ports/espressif/common-hal/_bleio/Adapter.c
#: ports/nrf/common-hal/_bleio/Adapter.c
msgid "Data not supported with directed advertising"
msgstr "Данные не поддерживаются направленным объявлением"
#: ports/espressif/common-hal/_bleio/Adapter.c
#: ports/nrf/common-hal/_bleio/Adapter.c
msgid "Data too large for advertisement packet"
msgstr "Данные слишком велики для пакета объявления"
#: ports/stm/common-hal/alarm/pin/PinAlarm.c
msgid "Deep sleep pins must use a rising edge with pulldown"
msgstr ""
"Выводы глубокого сна должны использовать сигнал по возрастанию с подтяжкой к "
"земле"
#: shared-bindings/audiobusio/PDMIn.c
msgid "Destination capacity is smaller than destination_length."
msgstr "Емкость destination меньше, чем destination_length."
#: ports/nrf/common-hal/audiobusio/I2SOut.c
msgid "Device in use"
msgstr "Устройство используется"
#: shared-bindings/displayio/Display.c
#: shared-bindings/framebufferio/FramebufferDisplay.c
msgid "Display must have a 16 bit colorspace."
msgstr "Дисплей должен иметь 16-битное цветовое пространство."
#: shared-bindings/displayio/Display.c
#: shared-bindings/displayio/EPaperDisplay.c
#: shared-bindings/framebufferio/FramebufferDisplay.c
msgid "Display rotation must be in 90 degree increments"
msgstr "Поворот дисплея должен осуществляться с шагом 90 градусов"
#: main.c
msgid "Done"
msgstr ""
#: shared-bindings/digitalio/DigitalInOut.c
msgid "Drive mode not used when direction is input."
msgstr "Drive mode не используется, когда направление является входным."
#: shared-bindings/aesio/aes.c
msgid "ECB only operates on 16 bytes at a time"
msgstr "ECB работает только с 16 байтами за раз"
#: ports/espressif/common-hal/busio/SPI.c
#: ports/espressif/common-hal/canio/CAN.c
msgid "ESP-IDF memory allocation failed"
msgstr "Ошибка выделения памяти ESP-IDF"
#: ports/atmel-samd/common-hal/frequencyio/FrequencyIn.c
#: ports/atmel-samd/common-hal/ps2io/Ps2.c
#: ports/atmel-samd/common-hal/pulseio/PulseIn.c
#: ports/cxd56/common-hal/pulseio/PulseIn.c
msgid "EXTINT channel already in use"
msgstr "Канал EXTINT уже используется"
#: shared-module/synthio/MidiTrack.c
#, c-format
msgid "Error in MIDI stream at position %d"
msgstr "Ошибка в MIDI-потоке на позиции %d"
#: extmod/modure.c
msgid "Error in regex"
msgstr "Ошибка в регулярном выражении(regex)"
#: shared-bindings/socketpool/Socket.c shared-bindings/ssl/SSLSocket.c
msgid "Error: Failure to bind"
msgstr "Ошибка: Сбой привязки"
#: ports/raspberrypi/bindings/rp2pio/StateMachine.c py/enum.c
#: shared-bindings/_bleio/__init__.c shared-bindings/aesio/aes.c
#: shared-bindings/busio/SPI.c shared-bindings/microcontroller/Pin.c
#: shared-bindings/neopixel_write/__init__.c
msgid "Expected a %q"
msgstr "Ожидалось(ся) %q"
#: shared-bindings/alarm/__init__.c
msgid "Expected an alarm"
msgstr "Ожидался сигнал"
#: ports/espressif/common-hal/_bleio/Adapter.c
#: ports/nrf/common-hal/_bleio/Adapter.c
msgid "Extended advertisements with scan response not supported."
msgstr "Расширенные объявления с ответом сканирования не поддерживаются."
#: extmod/ulab/code/numpy/fft/fft_tools.c
msgid "FFT is defined for ndarrays only"
msgstr "БПФ определено только для ndarrays"
#: extmod/ulab/code/numpy/fft/fft_tools.c
msgid "FFT is implemented for linear arrays only"
msgstr "БПФ реализовано только для линейных массивов"
#: ports/espressif/common-hal/ssl/SSLSocket.c
msgid "Failed SSL handshake"
msgstr "Не удался SSL handshake"
#: shared-bindings/ps2io/Ps2.c
msgid "Failed sending command."
msgstr "Не удалось отправить команду."
#: ports/nrf/sd_mutex.c
#, c-format
msgid "Failed to acquire mutex, err 0x%04x"
msgstr "Не удалось получить mutex, ошибка 0x%04x"
#: shared-module/rgbmatrix/RGBMatrix.c
msgid "Failed to allocate %q buffer"
msgstr ""
#: ports/espressif/common-hal/wifi/__init__.c
msgid "Failed to allocate Wifi memory"
msgstr "Не удалось выделить память Wifi"
#: ports/espressif/common-hal/wifi/ScannedNetworks.c
msgid "Failed to allocate wifi scan memory"
msgstr "Не удалось выделить память для сканирования wifi"
#: ports/stm/common-hal/audiopwmio/PWMAudioOut.c
msgid "Failed to buffer the sample"
msgstr "Не удалось выполнить буферизацию образца"
#: ports/espressif/common-hal/_bleio/Adapter.c
#: ports/nrf/common-hal/_bleio/Adapter.c
msgid "Failed to connect: internal error"
msgstr "Не удалось подключиться: внутренняя ошибка"
#: ports/nrf/common-hal/_bleio/Adapter.c
msgid "Failed to connect: timeout"
msgstr "Не удалось подключиться: тайм-аут"
#: shared-module/audiomp3/MP3Decoder.c
msgid "Failed to parse MP3 file"
msgstr "Не удалось распарсить файл MP3"
#: ports/nrf/sd_mutex.c
#, c-format
msgid "Failed to release mutex, err 0x%04x"
msgstr "Не удалось освободить mutex, ошибка 0x%04x"
#: supervisor/shared/safe_mode.c
msgid "Failed to write internal flash."
msgstr "Не удалось записать внутреннюю флэш-память."
#: supervisor/shared/safe_mode.c
msgid "Fatal error."
msgstr "Фатальная ошибка."
#: py/moduerrno.c
msgid "File exists"
msgstr "Файл существует"
#: ports/atmel-samd/common-hal/canio/Listener.c
#: ports/espressif/common-hal/canio/Listener.c
#: ports/stm/common-hal/canio/Listener.c
msgid "Filters too complex"
msgstr "Фильтры слишком сложные"
#: ports/espressif/common-hal/dualbank/__init__.c
msgid "Firmware image is invalid"
msgstr "Образ прошивки неправильный"
#: shared-bindings/bitmaptools/__init__.c
msgid "For L8 colorspace, input bitmap must have 8 bits per pixel"
msgstr ""
"Для цветового пространства L8 входной bitmap должен иметь 8 бит на пиксель"
#: shared-bindings/bitmaptools/__init__.c
msgid "For RGB colorspaces, input bitmap must have 16 bits per pixel"
msgstr ""
"Для цветового пространства RGB входной bitmap должен иметь 16 бит на пиксель"
#: ports/cxd56/common-hal/camera/Camera.c
msgid "Format not supported"
msgstr "Формат не поддерживается"
#: ports/mimxrt10xx/common-hal/microcontroller/Processor.c
msgid ""
"Frequency must be 24, 150, 396, 450, 528, 600, 720, 816, 912, 960 or 1008 Mhz"
msgstr ""
#: shared-bindings/pwmio/PWMOut.c
msgid "Frequency must match existing PWMOut using this timer"
msgstr ""
"Частота должна соответствовать существующему PWMOut, использующему этот "
"таймер"
#: shared-bindings/bitbangio/I2C.c shared-bindings/bitbangio/SPI.c
#: shared-bindings/busio/I2C.c shared-bindings/busio/SPI.c
msgid "Function requires lock"
msgstr "Функция требует блокировки"
#: ports/cxd56/common-hal/gnss/GNSS.c
msgid "GNSS init"
msgstr ""
#: ports/espressif/common-hal/espidf/__init__.c ports/espressif/esp_error.c
msgid "Generic Failure"
msgstr "Общий сбой"
#: shared-bindings/displayio/Display.c
#: shared-bindings/displayio/EPaperDisplay.c
#: shared-bindings/framebufferio/FramebufferDisplay.c
msgid "Group already used"
msgstr "Группа уже используется"
#: ports/atmel-samd/common-hal/busio/SPI.c ports/cxd56/common-hal/busio/SPI.c
#: ports/espressif/common-hal/busio/SPI.c
#: ports/mimxrt10xx/common-hal/busio/SPI.c ports/nrf/common-hal/busio/SPI.c
#: ports/raspberrypi/common-hal/busio/SPI.c
msgid "Half duplex SPI is not implemented"
msgstr ""
#: ports/mimxrt10xx/common-hal/busio/SPI.c ports/stm/common-hal/busio/I2C.c
#: ports/stm/common-hal/busio/SPI.c ports/stm/common-hal/canio/CAN.c
#: ports/stm/common-hal/sdioio/SDCard.c
msgid "Hardware busy, try alternative pins"
msgstr "Оборудование занято, попробуйте использовать другие пины"
#: ports/mimxrt10xx/common-hal/busio/UART.c ports/stm/common-hal/busio/UART.c
msgid "Hardware in use, try alternative pins"
msgstr "Оборудование используется, попробуйте использовать другие пины"
#: extmod/vfs_posix_file.c py/objstringio.c
msgid "I/O operation on closed file"
msgstr "Операция ввода-вывода на закрытом файле"
#: ports/stm/common-hal/busio/I2C.c
msgid "I2C init error"
msgstr ""
#: ports/raspberrypi/common-hal/busio/I2C.c
msgid "I2C peripheral in use"
msgstr "Периферийное устройство I2C уже используется"
#: shared-bindings/audiobusio/I2SOut.c
msgid "I2SOut not available"
msgstr "I2SOut недоступен"
#: shared-bindings/aesio/aes.c
#, c-format
msgid "IV must be %d bytes long"
msgstr "IV должен быть длиной %d байт"
#: ports/raspberrypi/bindings/rp2pio/StateMachine.c
msgid "In-buffer elements must be <= 4 bytes long"
msgstr "Элементы буфера должны быть длиной <= 4 байта"
#: py/persistentcode.c
msgid ""
"Incompatible .mpy file. Please update all .mpy files. See http://adafru.it/"
"mpy-update for more info."
msgstr ""
"Несовместимый файл .mpy. Пожалуйста, обновите все файлы .mpy. См. http://"
"adafru.it/mpy-update для получения дополнительной информации."
#: shared-bindings/_pew/PewPew.c
msgid "Incorrect buffer size"
msgstr "Неправильный размер буфера"
#: ports/raspberrypi/bindings/rp2pio/StateMachine.c
msgid "Init program size invalid"
msgstr "Неверный размер программы инициализации"
#: ports/raspberrypi/common-hal/rp2pio/StateMachine.c
msgid "Initial set pin direction conflicts with initial out pin direction"
msgstr ""
"Начальное направление пина set конфликтует с начальным направлением пина out"
#: ports/raspberrypi/common-hal/rp2pio/StateMachine.c
msgid "Initial set pin state conflicts with initial out pin state"
msgstr ""
"Начальное состояние пина set конфликтует с начальным состоянием пина out"
#: ports/espressif/common-hal/watchdog/WatchDogTimer.c
msgid "Initialization failed due to lack of memory"
msgstr "Инициализация не удалась из-за нехватки памяти"
#: shared-bindings/bitops/__init__.c
#, c-format
msgid "Input buffer length (%d) must be a multiple of the strand count (%d)"
msgstr "Длина входного буфера (%d) должна быть кратна количеству strand (%d)"
#: ports/atmel-samd/common-hal/pulseio/PulseIn.c
msgid "Input taking too long"
msgstr "Ввод занимает слишком много времени"
#: ports/espressif/common-hal/neopixel_write/__init__.c py/moduerrno.c
msgid "Input/output error"
msgstr "Ошибка ввода/вывода"
#: ports/raspberrypi/common-hal/rp2pio/StateMachine.c
#, c-format
msgid "Instruction %d shifts in more bits than pin count"
msgstr ""
"Инструкция %d вводит (shifts in) большее количество бит, чем количество пинов"
#: ports/raspberrypi/common-hal/rp2pio/StateMachine.c
#, c-format
msgid "Instruction %d shifts out more bits than pin count"
msgstr ""
"Инструкция %d выводит (shifts out) большее количество бит, чем количество "
"пинов"
#: ports/raspberrypi/common-hal/rp2pio/StateMachine.c
#, c-format
msgid "Instruction %d uses extra pin"
msgstr "Инструкция %d использует дополнительный пин"
#: ports/raspberrypi/common-hal/rp2pio/StateMachine.c
#, c-format
msgid "Instruction %d waits on input outside of count"
msgstr "Инструкция %d ожидает ввода за пределами count"
#: ports/nrf/common-hal/_bleio/__init__.c
msgid "Insufficient authentication"
msgstr "Неполная аутентификация"
#: ports/nrf/common-hal/_bleio/__init__.c
msgid "Insufficient encryption"
msgstr "Недостаточное шифрование"
#: ports/espressif/common-hal/wifi/Radio.c
msgid "Interface must be started"
msgstr "Интерфейс должен быть запущен"
#: ports/atmel-samd/audio_dma.c ports/raspberrypi/audio_dma.c
msgid "Internal audio buffer too small"
msgstr "Внутренний звуковой буфер слишком мал"
#: ports/stm/common-hal/busio/UART.c
msgid "Internal define error"
msgstr "Внутренняя ошибка определения"
#: ports/espressif/common-hal/paralleldisplay/ParallelBus.c
msgid "Internal error"
msgstr "Внутренняя ошибка"
#: shared-module/rgbmatrix/RGBMatrix.c
#, c-format
msgid "Internal error #%d"
msgstr "Внутренняя ошибка #%d"
#: supervisor/shared/safe_mode.c
msgid "Internal watchdog timer expired."
msgstr ""
#: py/argcheck.c
msgid "Invalid %q"
msgstr "Недопустимый %q"
#: shared-bindings/microcontroller/Pin.c
msgid "Invalid %q pin"
msgstr "Недопустимый пин %q"
#: ports/stm/common-hal/analogio/AnalogIn.c
msgid "Invalid ADC Unit value"
msgstr "Недопустимое значение единицы АЦП"
#: ports/espressif/common-hal/_bleio/__init__.c
#: ports/nrf/common-hal/_bleio/__init__.c
msgid "Invalid BLE parameter"
msgstr "Недопустимый параметр BLE"
#: shared-bindings/wifi/Radio.c
msgid "Invalid BSSID"
msgstr "Неверный BSSID"
#: shared-bindings/wifi/Radio.c
msgid "Invalid MAC address"
msgstr "Неверный MAC-адрес"
#: ports/espressif/common-hal/espidf/__init__.c ports/espressif/esp_error.c
#: py/moduerrno.c
msgid "Invalid argument"
msgstr "Недопустимый аргумент"
#: shared-module/displayio/Bitmap.c
msgid "Invalid bits per value"
msgstr "Недопустимое бит-на-значение"
#: ports/atmel-samd/common-hal/imagecapture/ParallelImageCapture.c
#, c-format
msgid "Invalid data_pins[%d]"
msgstr "Неверный data_pins[%d]"
#: shared-module/audiocore/WaveFile.c
msgid "Invalid format chunk size"
msgstr "Неверный размер блока формата"
#: supervisor/shared/safe_mode.c
msgid "Invalid memory access."
msgstr "Неправильный доступ к памяти."
#: ports/espressif/common-hal/wifi/Radio.c
msgid "Invalid multicast MAC address"
msgstr "Неверный MAC-адрес multicast"
#: shared-bindings/busio/UART.c
msgid "Invalid pins"
msgstr "Недопустимые пины"
#: ports/espressif/common-hal/espidf/__init__.c ports/espressif/esp_error.c
msgid "Invalid size"
msgstr "Неверный размер"
#: ports/espressif/common-hal/ssl/SSLContext.c
msgid "Invalid socket for TLS"
msgstr "Неверный сокет для TLS"
#: ports/espressif/common-hal/espidf/__init__.c ports/espressif/esp_error.c
msgid "Invalid state"
msgstr "Неверное состояние"
#: shared-bindings/aesio/aes.c
msgid "Key must be 16, 24, or 32 bytes long"
msgstr "Ключ должен быть длинной 16, 24 или 32 байта"
#: shared-module/is31fl3741/FrameBuffer.c
msgid "LED mappings must match display size"
msgstr ""
#: py/compile.c
msgid "LHS of keyword arg must be an id"
msgstr "LHS ключевого слова arg должен быть идентификатором(id)"
#: shared-module/displayio/Group.c
msgid "Layer already in a group"
msgstr ""
#: shared-module/displayio/Group.c
msgid "Layer must be a Group or TileGrid subclass"
msgstr ""
#: ports/espressif/common-hal/espidf/__init__.c ports/espressif/esp_error.c
msgid "MAC address was invalid"
msgstr "MAC адрес был недействительным"
#: shared-bindings/is31fl3741/IS31FL3741.c
msgid "Mapping must be a tuple"
msgstr ""
#: shared-module/displayio/Shape.c
#, c-format
msgid "Maximum x value when mirrored is %d"
msgstr "Максимальное значение x при зеркальном отображении - %d"
#: shared-bindings/audiobusio/PDMIn.c
msgid "Microphone startup delay must be in range 0.0 to 1.0"
msgstr "Задержка включения микрофона должна быть в диапазоне от 0.0 до 1.0"
#: ports/raspberrypi/bindings/rp2pio/StateMachine.c
#: ports/raspberrypi/common-hal/rp2pio/StateMachine.c
msgid "Mismatched data size"
msgstr ""
#: ports/raspberrypi/common-hal/rp2pio/StateMachine.c
msgid "Mismatched swap flag"
msgstr ""
#: ports/mimxrt10xx/common-hal/busio/SPI.c
msgid "Missing MISO or MOSI Pin"
msgstr "Отсутствует пин MISO или MOSI"
#: ports/stm/common-hal/busio/SPI.c
msgid "Missing MISO or MOSI pin"
msgstr ""
#: ports/raspberrypi/common-hal/rp2pio/StateMachine.c
#, c-format
msgid "Missing first_in_pin. Instruction %d reads pin(s)"
msgstr "Отсутствует first_in_pin. Инструкция %d читает состояние пина (-ов)"
#: ports/raspberrypi/common-hal/rp2pio/StateMachine.c
#, c-format
msgid "Missing first_in_pin. Instruction %d shifts in from pin(s)"
msgstr "Отсутствует first_out_pin. Инструкция %d вводит (shifts out) на пин(ы)"
#: ports/raspberrypi/common-hal/rp2pio/StateMachine.c
#, c-format
msgid "Missing first_in_pin. Instruction %d waits based on pin"
msgstr "Отсутствует first_in_pin. Инструкция %d ожидает на основе пина"
#: ports/raspberrypi/common-hal/rp2pio/StateMachine.c
#, c-format
msgid "Missing first_out_pin. Instruction %d shifts out to pin(s)"
msgstr ""
"Отсутствует first_out_pin. Инструкция %d выводит (shifts out) на пин(ы)"
#: ports/raspberrypi/common-hal/rp2pio/StateMachine.c
#, c-format
msgid "Missing first_out_pin. Instruction %d writes pin(s)"
msgstr "Отсутствует first_out_pin. Инструкция %d записывает пин(ы)"
#: ports/raspberrypi/common-hal/rp2pio/StateMachine.c
#, c-format
msgid "Missing first_set_pin. Instruction %d sets pin(s)"
msgstr "Отсутствует first_set_pin. Инструкция %d устанавливает пин(ы)"
#: ports/raspberrypi/common-hal/rp2pio/StateMachine.c
#, c-format
msgid "Missing jmp_pin. Instruction %d jumps on pin"
msgstr "Отсутствует jmp_pin. Инструкция %d перепрыгивает на пин"
#: shared-bindings/busio/UART.c shared-bindings/displayio/Group.c
msgid "Must be a %q subclass."
msgstr "Должен быть субклассом %q."
#: ports/mimxrt10xx/common-hal/busio/SPI.c shared-bindings/busio/SPI.c
msgid "Must provide MISO or MOSI pin"
msgstr "Пин MISO или MOSI должен быть предоставлен"
#: shared-bindings/rgbmatrix/RGBMatrix.c
#, c-format
msgid "Must use a multiple of 6 rgb pins, not %d"
msgstr "Количество используемых rgb-пинов должно быть кратно 6, а не %d"
#: supervisor/shared/safe_mode.c
msgid "NLR jump failed. Likely memory corruption."
msgstr "Не удалось выполнить NLR jump. Вероятно, повреждение памяти."
#: ports/espressif/common-hal/nvm/ByteArray.c
msgid "NVS Error"
msgstr "Ошибка NVS"
#: py/qstr.c
msgid "Name too long"
msgstr "Имя слишком длинное"
#: shared-bindings/displayio/TileGrid.c
msgid "New bitmap must be same size as old bitmap"
msgstr ""
#: ports/espressif/common-hal/_bleio/__init__.c
msgid "Nimble out of memory"
msgstr ""
#: ports/espressif/common-hal/_bleio/Characteristic.c
#: ports/nrf/common-hal/_bleio/Characteristic.c
msgid "No CCCD for this Characteristic"
msgstr "Нет CCCD для этой Characteristic"
#: ports/atmel-samd/common-hal/analogio/AnalogOut.c
#: ports/stm/common-hal/analogio/AnalogOut.c
msgid "No DAC on chip"
msgstr "ЦАП отсутствует на чипе"
#: ports/atmel-samd/common-hal/audiobusio/I2SOut.c
#: ports/atmel-samd/common-hal/audioio/AudioOut.c
#: ports/raspberrypi/common-hal/audiobusio/I2SOut.c
#: ports/raspberrypi/common-hal/audiopwmio/PWMAudioOut.c
msgid "No DMA channel found"
msgstr "Канал DMA не найден"
#: ports/raspberrypi/common-hal/audiopwmio/PWMAudioOut.c
msgid "No DMA pacing timer found"
msgstr ""
#: shared-module/adafruit_bus_device/i2c_device/I2CDevice.c
#, c-format
msgid "No I2C device at address: 0x%x"
msgstr ""
#: supervisor/shared/web_workflow/web_workflow.c
msgid "No IP"
msgstr ""
#: ports/espressif/common-hal/busio/SPI.c
#: ports/mimxrt10xx/common-hal/busio/SPI.c
msgid "No MISO Pin"
msgstr "Нет пина MISO"
#: ports/stm/common-hal/busio/SPI.c shared-module/bitbangio/SPI.c
msgid "No MISO pin"
msgstr ""
#: ports/espressif/common-hal/busio/SPI.c
#: ports/mimxrt10xx/common-hal/busio/SPI.c
msgid "No MOSI Pin"
msgstr "Нет пина MOSI"
#: ports/stm/common-hal/busio/SPI.c shared-module/bitbangio/SPI.c
msgid "No MOSI pin"
msgstr ""
#: ports/atmel-samd/common-hal/busio/UART.c
#: ports/espressif/common-hal/busio/UART.c
#: ports/mimxrt10xx/common-hal/busio/UART.c ports/nrf/common-hal/busio/UART.c
#: ports/raspberrypi/common-hal/busio/UART.c ports/stm/common-hal/busio/UART.c
msgid "No RX pin"
msgstr "Нет пина RX"
#: ports/atmel-samd/common-hal/busio/UART.c
#: ports/espressif/common-hal/busio/UART.c
#: ports/mimxrt10xx/common-hal/busio/UART.c ports/nrf/common-hal/busio/UART.c
#: ports/raspberrypi/common-hal/busio/UART.c ports/stm/common-hal/busio/UART.c
msgid "No TX pin"
msgstr "Нет пина TX"
#: ports/atmel-samd/common-hal/frequencyio/FrequencyIn.c
msgid "No available clocks"
msgstr ""
#: ports/espressif/common-hal/imagecapture/ParallelImageCapture.c
msgid "No capture in progress"
msgstr "Захват не ведется"
#: shared-bindings/_bleio/PacketBuffer.c
msgid "No connection: length cannot be determined"
msgstr "Нет соединения: длина не может быть определена"
#: shared-bindings/board/__init__.c
msgid "No default %q bus"
msgstr "Нет шины %q по умолчанию"
#: ports/atmel-samd/common-hal/touchio/TouchIn.c
msgid "No free GCLKs"
msgstr "Свободные GCLK отсутствуют"
#: shared-bindings/os/__init__.c
msgid "No hardware random available"
msgstr "Отсутствует аппаратный генератор случайных чисел"
#: ports/raspberrypi/common-hal/rp2pio/StateMachine.c
msgid "No in in program"
msgstr "Нет in в программе"
#: ports/raspberrypi/common-hal/rp2pio/StateMachine.c
msgid "No in or out in program"
msgstr "В программе отсутствует ввод или вывод"
#: shared-bindings/aesio/aes.c
msgid "No key was specified"
msgstr "Ключ не был указан"
#: shared-bindings/time/__init__.c
msgid "No long integer support"
msgstr "Нет поддержки длинных целых чисел (long integer)"
#: shared-module/usb_hid/__init__.c
#, c-format
msgid "No more than %d HID devices allowed"
msgstr "Допускается не более %d HID устройств"
#: shared-bindings/wifi/Radio.c
msgid "No network with that ssid"
msgstr "Нет сети с этим ssid"
#: ports/raspberrypi/common-hal/rp2pio/StateMachine.c
msgid "No out in program"
msgstr "В программе отсутствует вывод"
#: ports/atmel-samd/common-hal/busio/I2C.c
#: ports/espressif/common-hal/busio/I2C.c
#: ports/mimxrt10xx/common-hal/busio/I2C.c ports/nrf/common-hal/busio/I2C.c
#: ports/raspberrypi/common-hal/busio/I2C.c
msgid "No pull up found on SDA or SCL; check your wiring"
msgstr ""
"Подтяжка на выводах SDA или SCL не обнаружена; проверь схему подключения"
#: shared-module/touchio/TouchIn.c
msgid "No pulldown on pin; 1Mohm recommended"
msgstr "Отсутствует подтяжка к земле на пине; Рекомендуется 1 Мегаом"
#: py/moduerrno.c
msgid "No space left on device"
msgstr "На устройстве не осталось свободного места"
#: py/moduerrno.c
msgid "No such device"
msgstr ""
#: py/moduerrno.c
msgid "No such file/directory"
msgstr "Файл/директория не существует"
#: shared-module/rgbmatrix/RGBMatrix.c
msgid "No timer available"
msgstr "Нет доступного таймера"
#: supervisor/shared/safe_mode.c
msgid "Nordic system firmware failure assertion."
msgstr ""
#: ports/nrf/common-hal/_bleio/__init__.c
msgid "Nordic system firmware out of memory"
msgstr ""
#: shared-bindings/ipaddress/IPv4Address.c shared-bindings/ipaddress/__init__.c
msgid "Not a valid IP string"
msgstr "Недействительная строка IP"
#: ports/espressif/common-hal/_bleio/__init__.c
#: ports/nrf/common-hal/_bleio/__init__.c
#: shared-bindings/_bleio/CharacteristicBuffer.c
msgid "Not connected"
msgstr "Не подключено"
#: shared-bindings/audiobusio/I2SOut.c shared-bindings/audioio/AudioOut.c
#: shared-bindings/audiopwmio/PWMAudioOut.c
msgid "Not playing"
msgstr "Не играет"
#: shared-bindings/_bleio/__init__.c
msgid "Not settable"
msgstr "Не устанавливается"
#: ports/espressif/common-hal/paralleldisplay/ParallelBus.c
#, c-format
msgid "Number of data_pins must be 8 or 16, not %d"
msgstr "Количество data_pins должно быть 8 или 16, а не %d"
#: shared-bindings/util.c
msgid ""
"Object has been deinitialized and can no longer be used. Create a new object."
msgstr ""
"Объект был деинициализирован и больше не может быть использован. Создайте "
"новый объект."
#: ports/nrf/common-hal/busio/UART.c
msgid "Odd parity is not supported"
msgstr ""
#: supervisor/shared/bluetooth/bluetooth.c
msgid "Off"
msgstr ""
#: supervisor/shared/bluetooth/bluetooth.c
msgid "Ok"
msgstr ""
#: ports/atmel-samd/common-hal/audiobusio/PDMIn.c
#: ports/raspberrypi/common-hal/audiobusio/PDMIn.c
msgid "Only 8 or 16 bit mono with "
msgstr "Только 8- или 16-битное моно с "
#: ports/espressif/common-hal/wifi/__init__.c
msgid "Only IPv4 addresses supported"
msgstr "Поддерживаются только адреса IPv4"
#: ports/espressif/common-hal/socketpool/Socket.c
msgid "Only IPv4 sockets supported"
msgstr "Поддерживаются только сокеты IPv4"
#: shared-module/displayio/OnDiskBitmap.c
#, c-format
msgid ""
"Only Windows format, uncompressed BMP supported: given header size is %d"
msgstr ""
"Поддерживается только формат Windows, несжатый BMP: заданный размер "
"заголовка - %d"
#: shared-bindings/_bleio/Adapter.c
msgid "Only connectable advertisements can be directed"
msgstr ""
#: ports/stm/common-hal/alarm/pin/PinAlarm.c
msgid "Only edge detection is available on this hardware"
msgstr ""
#: shared-bindings/ipaddress/__init__.c
msgid "Only int or string supported for ip"
msgstr ""
#: shared-module/displayio/OnDiskBitmap.c
#, c-format
msgid ""
"Only monochrome, indexed 4bpp or 8bpp, and 16bpp or greater BMPs supported: "
"%d bpp given"
msgstr ""
#: ports/espressif/common-hal/alarm/touch/TouchAlarm.c
msgid "Only one TouchAlarm can be set in deep sleep."
msgstr ""
#: ports/espressif/common-hal/i2ctarget/I2CTarget.c
msgid "Only one address is allowed"
msgstr ""
#: ports/atmel-samd/common-hal/alarm/time/TimeAlarm.c
#: ports/nrf/common-hal/alarm/time/TimeAlarm.c
#: ports/stm/common-hal/alarm/time/TimeAlarm.c
msgid "Only one alarm.time alarm can be set"
msgstr ""
#: ports/espressif/common-hal/alarm/time/TimeAlarm.c
#: ports/raspberrypi/common-hal/alarm/time/TimeAlarm.c
msgid "Only one alarm.time alarm can be set."
msgstr ""
#: shared-module/displayio/ColorConverter.c
msgid "Only one color can be transparent at a time"
msgstr ""
#: py/moduerrno.c
msgid "Operation not permitted"
msgstr ""
#: ports/espressif/common-hal/espidf/__init__.c ports/espressif/esp_error.c
msgid "Operation or feature not supported"
msgstr ""
#: ports/espressif/common-hal/espidf/__init__.c ports/espressif/esp_error.c
msgid "Operation timed out"
msgstr ""
#: ports/espressif/common-hal/espidf/__init__.c ports/espressif/esp_error.c
msgid "Out of memory"
msgstr ""
#: ports/espressif/common-hal/socketpool/Socket.c
msgid "Out of sockets"
msgstr ""
#: ports/raspberrypi/bindings/rp2pio/StateMachine.c
msgid "Out-buffer elements must be <= 4 bytes long"
msgstr ""
#: shared-bindings/audiobusio/PDMIn.c
msgid "Oversample must be multiple of 8."
msgstr ""
#: shared-bindings/audiobusio/PDMIn.c
msgid "PDMIn not available"
msgstr ""
#: shared-bindings/pwmio/PWMOut.c
msgid ""
"PWM frequency not writable when variable_frequency is False on construction."
msgstr ""
#: ports/stm/common-hal/pwmio/PWMOut.c
msgid "PWM restart"
msgstr ""
#: ports/raspberrypi/common-hal/countio/Counter.c
msgid "PWM slice already in use"
msgstr ""
#: ports/raspberrypi/common-hal/countio/Counter.c
msgid "PWM slice channel A already in use"
msgstr ""
#: ports/espressif/common-hal/audiobusio/__init__.c
msgid "Peripheral in use"
msgstr ""
#: py/moduerrno.c
msgid "Permission denied"
msgstr ""
#: ports/stm/common-hal/alarm/pin/PinAlarm.c
msgid "Pin cannot wake from Deep Sleep"
msgstr "Пин не может вывести из глубокого сна"
#: ports/raspberrypi/common-hal/rp2pio/StateMachine.c
msgid "Pin count too large"
msgstr "Слишком большое количество пинов"
#: ports/stm/common-hal/alarm/pin/PinAlarm.c
#: ports/stm/common-hal/pulseio/PulseIn.c
msgid "Pin interrupt already in use"
msgstr "Прерывание пина уже используется"
#: shared-bindings/adafruit_bus_device/spi_device/SPIDevice.c
#: shared-bindings/digitalio/DigitalInOut.c
msgid "Pin is input only"
msgstr "Пин является только входом"
#: ports/raspberrypi/common-hal/countio/Counter.c
msgid "Pin must be on PWM Channel B"
msgstr "Пин должен быть на канале ШИМ B"
#: ports/atmel-samd/common-hal/countio/Counter.c
msgid "Pin must support hardware interrupts"
msgstr "Пин должен поддерживать аппаратные прерывания"
#: shared-bindings/rgbmatrix/RGBMatrix.c
#, c-format
msgid ""
"Pinout uses %d bytes per element, which consumes more than the ideal %d "
"bytes. If this cannot be avoided, pass allow_inefficient=True to the "
"constructor"
msgstr ""
"Pinout использует %d байт на элемент, что потребляет больше, чем идеальные "
"%d байт. Если этого нельзя избежать, передайте allow_inefficient=True в "
"конструктор"
#: ports/raspberrypi/common-hal/imagecapture/ParallelImageCapture.c
msgid "Pins must be sequential"
msgstr "Пины должны быть последовательными"
#: ports/raspberrypi/common-hal/rotaryio/IncrementalEncoder.c
msgid "Pins must be sequential GPIO pins"
msgstr "Пины должны быть последовательными выводами GPIO"
#: ports/raspberrypi/common-hal/audiopwmio/PWMAudioOut.c
msgid "Pins must share PWM slice"
msgstr "Пины должны иметь общий срез ШИМ"
#: py/builtinhelp.c
msgid "Plus any modules on the filesystem\n"
msgstr ""
#: shared-module/vectorio/Polygon.c
msgid "Polygon needs at least 3 points"
msgstr ""
#: shared-bindings/_bleio/Adapter.c
msgid "Prefix buffer must be on the heap"
msgstr ""
#: main.c
msgid "Press any key to enter the REPL. Use CTRL-D to reload.\n"
msgstr ""
"Нажмите любую клавишу чтобы зайти в REPL. Используйте CTRL-D для "
"перезагрузки.\n"
#: main.c
msgid "Pretending to deep sleep until alarm, CTRL-C or file write.\n"
msgstr "Притворяюсь глубоко спать до сигнала, CTRL-C или запись в файл.\n"
#: ports/raspberrypi/common-hal/rp2pio/StateMachine.c
msgid "Program does IN without loading ISR"
msgstr ""
#: ports/raspberrypi/common-hal/rp2pio/StateMachine.c
msgid "Program does OUT without loading OSR"
msgstr ""
#: ports/raspberrypi/bindings/rp2pio/StateMachine.c
msgid "Program size invalid"
msgstr ""
#: shared-bindings/digitalio/DigitalInOut.c
msgid "Pull not used when direction is output."
msgstr ""
#: ports/atmel-samd/common-hal/watchdog/WatchDogTimer.c
#: ports/raspberrypi/common-hal/watchdog/WatchDogTimer.c
msgid "RAISE mode is not implemented"
msgstr ""
#: ports/raspberrypi/common-hal/countio/Counter.c
msgid "RISE_AND_FALL not available on this chip"
msgstr ""
#: ports/stm/common-hal/os/__init__.c
msgid "RNG DeInit Error"
msgstr ""
#: ports/stm/common-hal/os/__init__.c
msgid "RNG Init Error"
msgstr ""
#: ports/atmel-samd/common-hal/busio/UART.c ports/cxd56/common-hal/busio/UART.c
#: ports/nrf/common-hal/busio/UART.c ports/stm/common-hal/busio/UART.c
msgid "RS485"
msgstr ""
#: ports/espressif/common-hal/busio/UART.c
#: ports/mimxrt10xx/common-hal/busio/UART.c
msgid "RS485 inversion specified when not in RS485 mode"
msgstr ""
#: shared-bindings/alarm/time/TimeAlarm.c shared-bindings/time/__init__.c
msgid "RTC is not supported on this board"
msgstr ""
#: ports/stm/common-hal/os/__init__.c
msgid "Random number generation error"
msgstr ""
#: shared-bindings/memorymonitor/AllocationSize.c
#: shared-bindings/pulseio/PulseIn.c
msgid "Read-only"
msgstr ""
#: extmod/vfs_fat.c py/moduerrno.c
msgid "Read-only filesystem"
msgstr ""
#: shared-module/displayio/Bitmap.c
msgid "Read-only object"
msgstr ""
#: ports/espressif/common-hal/espidf/__init__.c ports/espressif/esp_error.c
msgid "Received response was invalid"
msgstr ""
#: supervisor/shared/bluetooth/bluetooth.c
msgid "Reconnecting"
msgstr ""
#: shared-bindings/displayio/EPaperDisplay.c
msgid "Refresh too soon"
msgstr ""
#: shared-bindings/canio/RemoteTransmissionRequest.c
msgid "RemoteTransmissionRequests limited to 8 bytes"
msgstr ""
#: shared-bindings/aesio/aes.c
msgid "Requested AES mode is unsupported"
msgstr ""
#: ports/espressif/common-hal/espidf/__init__.c ports/espressif/esp_error.c
msgid "Requested resource not found"
msgstr ""
#: ports/atmel-samd/common-hal/audioio/AudioOut.c
msgid "Right channel unsupported"
msgstr ""
#: main.c
msgid "Running in safe mode! Not running saved code.\n"
msgstr ""
#: shared-module/sdcardio/SDCard.c
msgid "SD card CSD format not supported"
msgstr ""
#: ports/cxd56/common-hal/sdioio/SDCard.c
msgid "SDCard init"
msgstr ""
#: ports/stm/common-hal/sdioio/SDCard.c
#, c-format
msgid "SDIO GetCardInfo Error %d"
msgstr ""
#: ports/stm/common-hal/sdioio/SDCard.c
#, c-format
msgid "SDIO Init Error %d"
msgstr ""
#: ports/espressif/common-hal/busio/SPI.c
msgid "SPI configuration failed"
msgstr ""
#: ports/stm/common-hal/busio/SPI.c
msgid "SPI init error"
msgstr ""
#: ports/raspberrypi/common-hal/busio/SPI.c
msgid "SPI peripheral in use"
msgstr ""
#: ports/stm/common-hal/busio/SPI.c
msgid "SPI re-init"
msgstr ""
#: shared-bindings/is31fl3741/FrameBuffer.c
msgid "Scale dimensions must divide by 3"
msgstr ""
#: ports/espressif/common-hal/_bleio/Adapter.c
#: ports/nrf/common-hal/_bleio/Adapter.c
msgid "Scan already in progess. Stop with stop_scan."
msgstr ""
#: ports/atmel-samd/common-hal/audiobusio/I2SOut.c
#: ports/atmel-samd/common-hal/audiobusio/PDMIn.c
msgid "Serializer in use"
msgstr ""
#: shared-bindings/ssl/SSLContext.c
msgid "Server side context cannot have hostname"
msgstr ""
#: ports/cxd56/common-hal/camera/Camera.c
msgid "Size not supported"
msgstr ""
#: ports/raspberrypi/common-hal/alarm/SleepMemory.c
msgid "Sleep Memory not available"
msgstr ""
#: shared-bindings/alarm/SleepMemory.c shared-bindings/nvm/ByteArray.c
msgid "Slice and value different lengths."
msgstr ""
#: shared-bindings/displayio/Bitmap.c shared-bindings/displayio/Group.c
#: shared-bindings/displayio/TileGrid.c
#: shared-bindings/memorymonitor/AllocationSize.c
#: shared-bindings/pulseio/PulseIn.c
msgid "Slices not supported"
msgstr ""
#: ports/espressif/common-hal/socketpool/SocketPool.c
msgid "SocketPool can only be used with wifi.radio"
msgstr ""
#: shared-bindings/aesio/aes.c
msgid "Source and destination buffers must be the same length"
msgstr ""
#: shared-bindings/paralleldisplay/ParallelBus.c
msgid "Specify exactly one of data0 or data_pins"
msgstr "Укажите точно один из data0 или data_pins"
#: extmod/modure.c
msgid "Splitting with sub-captures"
msgstr ""
#: ports/raspberrypi/common-hal/audiopwmio/PWMAudioOut.c
msgid "Stereo left must be on PWM channel A"
msgstr ""
#: ports/raspberrypi/common-hal/audiopwmio/PWMAudioOut.c
msgid "Stereo right must be on PWM channel B"
msgstr ""
#: shared-bindings/multiterminal/__init__.c
msgid "Stream missing readinto() or write() method."
msgstr ""
#: ports/mimxrt10xx/common-hal/busio/UART.c ports/stm/common-hal/busio/UART.c
msgid "Supply at least one UART pin"
msgstr "Предоставьте хотяб один пин UART"
#: shared-bindings/alarm/time/TimeAlarm.c
msgid "Supply one of monotonic_time or epoch_time"
msgstr ""
#: shared-bindings/gnss/GNSS.c
msgid "System entry must be gnss.SatelliteSystem"
msgstr ""
#: ports/stm/common-hal/microcontroller/Processor.c
msgid "Temperature read timed out"
msgstr ""
#: supervisor/shared/safe_mode.c
msgid ""
"The CircuitPython heap was corrupted because the stack was too small.\n"
"Increase the stack size if you know how. If not:"
msgstr ""
#: supervisor/shared/safe_mode.c
msgid ""
"The `microcontroller` module was used to boot into safe mode. Press reset to "
"exit safe mode."
msgstr ""
#: shared-bindings/rgbmatrix/RGBMatrix.c
msgid "The length of rgb_pins must be 6, 12, 18, 24, or 30"
msgstr "Длина rgb_pins должна быть 6, 12, 18, 24 или 30"
#: supervisor/shared/safe_mode.c
msgid ""
"The microcontroller's power dipped. Make sure your power supply provides\n"
"enough power for the whole circuit and press reset (after ejecting "
"CIRCUITPY)."
msgstr ""
#: shared-module/audiomixer/MixerVoice.c
msgid "The sample's bits_per_sample does not match the mixer's"
msgstr ""
#: shared-module/audiomixer/MixerVoice.c
msgid "The sample's channel count does not match the mixer's"
msgstr ""
#: shared-module/audiomixer/MixerVoice.c
msgid "The sample's sample rate does not match the mixer's"
msgstr ""
#: shared-module/audiomixer/MixerVoice.c
msgid "The sample's signedness does not match the mixer's"
msgstr ""
#: shared-module/imagecapture/ParallelImageCapture.c
msgid "This microcontroller does not support continuous capture."
msgstr ""
#: shared-module/paralleldisplay/ParallelBus.c
msgid ""
"This microcontroller only supports data0=, not data_pins=, because it "
"requires contiguous pins."
msgstr ""
"Этот микроконтроллер поддерживает только data0=, а не data_pins=, поскольку "
"для него требуются смежные выводы."
#: shared-bindings/displayio/TileGrid.c
msgid "Tile height must exactly divide bitmap height"
msgstr ""
#: shared-bindings/displayio/TileGrid.c shared-module/displayio/TileGrid.c
msgid "Tile index out of bounds"
msgstr ""
#: shared-bindings/displayio/TileGrid.c
msgid "Tile width must exactly divide bitmap width"
msgstr ""
#: shared-bindings/alarm/time/TimeAlarm.c
msgid "Time is in the past."
msgstr ""
#: ports/espressif/common-hal/_bleio/Adapter.c
#: ports/nrf/common-hal/_bleio/Adapter.c
#, c-format
msgid "Timeout is too long: Maximum timeout length is %d seconds"
msgstr ""
#: supervisor/shared/safe_mode.c
msgid "To exit, please reset the board without "
msgstr ""
#: ports/atmel-samd/common-hal/audiobusio/I2SOut.c
msgid "Too many channels in sample"
msgstr ""
#: ports/raspberrypi/common-hal/audiobusio/I2SOut.c
msgid "Too many channels in sample."
msgstr ""
#: shared-module/displayio/__init__.c
msgid "Too many display busses"
msgstr ""
#: shared-module/displayio/__init__.c
msgid "Too many displays"
msgstr ""
#: ports/espressif/common-hal/_bleio/PacketBuffer.c
#: ports/nrf/common-hal/_bleio/PacketBuffer.c
msgid "Total data to write is larger than %q"
msgstr ""
#: ports/atmel-samd/common-hal/alarm/touch/TouchAlarm.c
#: ports/raspberrypi/common-hal/alarm/touch/TouchAlarm.c
#: ports/stm/common-hal/alarm/touch/TouchAlarm.c
msgid "Touch alarms not available"
msgstr ""
#: py/obj.c
msgid "Traceback (most recent call last):\n"
msgstr ""
#: shared-bindings/time/__init__.c
msgid "Tuple or struct_time argument required"
msgstr ""
#: ports/stm/common-hal/busio/UART.c
msgid "UART de-init"
msgstr ""
#: ports/atmel-samd/common-hal/busio/UART.c ports/cxd56/common-hal/busio/UART.c
#: ports/espressif/common-hal/busio/UART.c ports/stm/common-hal/busio/UART.c
msgid "UART init"
msgstr ""
#: ports/stm/common-hal/busio/UART.c
msgid "UART re-init"
msgstr ""
#: ports/stm/common-hal/busio/UART.c
msgid "UART write"
msgstr ""
#: shared-module/usb_hid/Device.c
msgid "USB busy"
msgstr ""
#: supervisor/shared/safe_mode.c
msgid "USB devices need more endpoints than are available."
msgstr ""
#: supervisor/shared/safe_mode.c
msgid "USB devices specify too many interface names."
msgstr ""
#: shared-module/usb_hid/Device.c
msgid "USB error"
msgstr ""
#: shared-bindings/_bleio/UUID.c
msgid "UUID integer value must be 0-0xffff"
msgstr ""
#: shared-bindings/_bleio/UUID.c
msgid "UUID string not 'xxxxxxxx-xxxx-xxxx-xxxx-xxxxxxxxxxxx'"
msgstr ""
#: shared-bindings/_bleio/UUID.c
msgid "UUID value is not str, int or byte buffer"
msgstr ""
#: ports/atmel-samd/common-hal/audiobusio/I2SOut.c
#: ports/atmel-samd/common-hal/audioio/AudioOut.c
#: ports/raspberrypi/common-hal/audiobusio/I2SOut.c
#: ports/raspberrypi/common-hal/audiopwmio/PWMAudioOut.c
msgid "Unable to allocate buffers for signed conversion"
msgstr ""
#: ports/espressif/common-hal/busio/I2C.c
msgid "Unable to create lock"
msgstr ""
#: shared-module/displayio/I2CDisplay.c shared-module/is31fl3741/IS31FL3741.c
#, c-format
msgid "Unable to find I2C Display at %x"
msgstr ""
#: ports/atmel-samd/common-hal/audiobusio/I2SOut.c
#: ports/atmel-samd/common-hal/audiobusio/PDMIn.c
msgid "Unable to find free GCLK"
msgstr ""
#: py/parse.c
msgid "Unable to init parser"
msgstr ""
#: shared-module/displayio/OnDiskBitmap.c
msgid "Unable to read color palette data"
msgstr ""
#: ports/espressif/common-hal/mdns/Server.c
msgid "Unable to start mDNS query"
msgstr ""
#: shared-bindings/nvm/ByteArray.c
msgid "Unable to write to nvm."
msgstr ""
#: shared-bindings/alarm/SleepMemory.c
msgid "Unable to write to sleep_memory."
msgstr ""
#: ports/nrf/common-hal/_bleio/UUID.c
msgid "Unexpected nrfx uuid type"
msgstr ""
#: ports/espressif/common-hal/ssl/SSLSocket.c
#, c-format
msgid "Unhandled ESP TLS error %d %d %x %d"
msgstr ""
#: ports/espressif/common-hal/_bleio/__init__.c
#, c-format
msgid "Unknown BLE error at %s:%d: %d"
msgstr ""
#: ports/espressif/common-hal/_bleio/__init__.c
#, c-format
msgid "Unknown BLE error: %d"
msgstr ""
#: shared-bindings/wifi/Radio.c
#, c-format
msgid "Unknown failure %d"
msgstr ""
#: ports/nrf/common-hal/_bleio/__init__.c
#, c-format
msgid "Unknown gatt error: 0x%04x"
msgstr ""
#: ports/atmel-samd/common-hal/alarm/pin/PinAlarm.c
#: supervisor/shared/safe_mode.c
msgid "Unknown reason."
msgstr ""
#: ports/nrf/common-hal/_bleio/__init__.c
#, c-format
msgid "Unknown security error: 0x%04x"
msgstr ""
#: ports/espressif/common-hal/_bleio/__init__.c
#, c-format
msgid "Unknown system firmware error at %s:%d: %d"
msgstr ""
#: ports/nrf/common-hal/_bleio/__init__.c
#, c-format
msgid "Unknown system firmware error: %04x"
msgstr ""
#: ports/espressif/common-hal/_bleio/__init__.c
#, c-format
msgid "Unknown system firmware error: %d"
msgstr ""
#: shared-bindings/adafruit_pixelbuf/PixelBuf.c
#, c-format
msgid "Unmatched number of items on RHS (expected %d, got %d)."
msgstr ""
#: ports/nrf/common-hal/_bleio/__init__.c
msgid ""
"Unspecified issue. Can be that the pairing prompt on the other device was "
"declined or ignored."
msgstr ""
#: shared-bindings/bitmaptools/__init__.c
msgid "Unsupported colorspace"
msgstr ""
#: shared-module/displayio/display_core.c
msgid "Unsupported display bus type"
msgstr ""
#: shared-module/audiocore/WaveFile.c
msgid "Unsupported format"
msgstr ""
#: shared-bindings/hashlib/__init__.c
msgid "Unsupported hash algorithm"
msgstr ""
#: ports/espressif/common-hal/dualbank/__init__.c
msgid "Update Failed"
msgstr ""
#: ports/espressif/common-hal/_bleio/Characteristic.c
#: ports/espressif/common-hal/_bleio/Descriptor.c
#: ports/nrf/common-hal/_bleio/Characteristic.c
#: ports/nrf/common-hal/_bleio/Descriptor.c
msgid "Value length != required fixed length"
msgstr ""
#: ports/espressif/common-hal/_bleio/Characteristic.c
#: ports/espressif/common-hal/_bleio/Descriptor.c
#: ports/nrf/common-hal/_bleio/Characteristic.c
#: ports/nrf/common-hal/_bleio/Descriptor.c
msgid "Value length > max_length"
msgstr ""
#: ports/espressif/common-hal/espidf/__init__.c ports/espressif/esp_error.c
msgid "Version was invalid"
msgstr ""
#: ports/stm/common-hal/microcontroller/Processor.c
msgid "Voltage read timed out"
msgstr ""
#: main.c
msgid "WARNING: Your code filename has two extensions\n"
msgstr ""
#: ports/atmel-samd/common-hal/watchdog/WatchDogTimer.c
#: ports/nrf/common-hal/watchdog/WatchDogTimer.c
#: ports/raspberrypi/common-hal/watchdog/WatchDogTimer.c
msgid "WatchDogTimer cannot be deinitialized once mode is set to RESET"
msgstr ""
#: shared-bindings/watchdog/WatchDogTimer.c
msgid "WatchDogTimer is not currently running"
msgstr ""
#: shared-bindings/watchdog/WatchDogTimer.c
msgid "WatchDogTimer.mode cannot be changed once set to WatchDogMode.RESET"
msgstr ""
#: shared-bindings/watchdog/WatchDogTimer.c
msgid "WatchDogTimer.timeout must be greater than 0"
msgstr ""
#: py/builtinhelp.c
#, c-format
msgid ""
"Welcome to Adafruit CircuitPython %s!\n"
"\n"
"Visit circuitpython.org for more information.\n"
"\n"
"To list built-in modules type `help(\"modules\")`.\n"
msgstr ""
#: supervisor/shared/web_workflow/web_workflow.c
msgid "Wi-Fi: "
msgstr ""
#: main.c
msgid "Woken up by alarm.\n"
msgstr ""
#: ports/espressif/common-hal/_bleio/PacketBuffer.c
#: ports/nrf/common-hal/_bleio/PacketBuffer.c
msgid "Writes not supported on Characteristic"
msgstr ""
#: supervisor/shared/safe_mode.c
msgid "You are in safe mode because:\n"
msgstr ""
#: supervisor/shared/safe_mode.c
msgid ""
"You pressed the reset button during boot. Press again to exit safe mode."
msgstr ""
#: supervisor/shared/safe_mode.c
msgid "You requested starting safe mode by "
msgstr ""
#: py/objtype.c
msgid "__init__() should return None"
msgstr ""
#: py/objtype.c
msgid "__init__() should return None, not '%q'"
msgstr ""
#: py/objobject.c
msgid "__new__ arg must be a user-type"
msgstr ""
#: extmod/modubinascii.c extmod/moduhashlib.c py/objarray.c
msgid "a bytes-like object is required"
msgstr ""
#: shared-bindings/i2ctarget/I2CTarget.c
msgid "address out of bounds"
msgstr ""
#: shared-bindings/i2ctarget/I2CTarget.c
msgid "addresses is empty"
msgstr ""
#: py/compile.c
msgid "annotation must be an identifier"
msgstr ""
#: py/modbuiltins.c
msgid "arg is an empty sequence"
msgstr ""
#: py/objobject.c
msgid "arg must be user-type"
msgstr ""
#: extmod/ulab/code/numpy/numerical.c
msgid "argsort argument must be an ndarray"
msgstr ""
#: extmod/ulab/code/numpy/numerical.c
msgid "argsort is not implemented for flattened arrays"
msgstr ""
#: py/runtime.c shared-bindings/supervisor/__init__.c
msgid "argument has wrong type"
msgstr ""
#: py/compile.c
msgid "argument name reused"
msgstr ""
#: py/argcheck.c shared-bindings/_stage/__init__.c
#: shared-bindings/digitalio/DigitalInOut.c
msgid "argument num/types mismatch"
msgstr ""
#: py/runtime.c
msgid "argument should be a '%q' not a '%q'"
msgstr ""
#: extmod/ulab/code/numpy/numerical.c extmod/ulab/code/numpy/transform.c
msgid "arguments must be ndarrays"
msgstr ""
#: extmod/ulab/code/ndarray.c
msgid "array and index length must be equal"
msgstr ""
#: extmod/ulab/code/numpy/io/io.c
msgid "array has too many dimensions"
msgstr ""
#: py/objarray.c shared-bindings/alarm/SleepMemory.c
#: shared-bindings/nvm/ByteArray.c
msgid "array/bytes required on right side"
msgstr ""
#: extmod/ulab/code/numpy/numerical.c
msgid "attempt to get (arg)min/(arg)max of empty sequence"
msgstr ""
#: extmod/ulab/code/numpy/numerical.c
msgid "attempt to get argmin/argmax of an empty sequence"
msgstr ""
#: py/objstr.c
msgid "attributes not supported yet"
msgstr ""
#: extmod/ulab/code/ulab_tools.c
msgid "axis is out of bounds"
msgstr ""
#: extmod/ulab/code/numpy/numerical.c extmod/ulab/code/ulab_tools.c
msgid "axis must be None, or an integer"
msgstr ""
#: extmod/ulab/code/numpy/numerical.c
msgid "axis too long"
msgstr ""
#: shared-bindings/bitmaptools/__init__.c
msgid "background value out of range of target"
msgstr ""
#: py/builtinevex.c
msgid "bad compile mode"
msgstr ""
#: py/objstr.c
msgid "bad conversion specifier"
msgstr ""
#: py/objstr.c
msgid "bad format string"
msgstr ""
#: py/binary.c py/objarray.c
msgid "bad typecode"
msgstr ""
#: py/emitnative.c
msgid "binary op %q not implemented"
msgstr ""
#: shared-bindings/bitmaptools/__init__.c
msgid "bitmap sizes must match"
msgstr ""
#: extmod/modurandom.c
msgid "bits must be 32 or less"
msgstr ""
#: shared-bindings/audiomixer/Mixer.c
msgid "bits_per_sample must be 8 or 16"
msgstr ""
#: py/emitinlinethumb.c
msgid "branch not in range"
msgstr ""
#: extmod/ulab/code/numpy/create.c extmod/ulab/code/utils/utils.c
msgid "buffer is smaller than requested size"
msgstr ""
#: extmod/ulab/code/numpy/create.c extmod/ulab/code/utils/utils.c
msgid "buffer size must be a multiple of element size"
msgstr ""
#: shared-module/struct/__init__.c
msgid "buffer size must match format"
msgstr ""
#: shared-bindings/bitbangio/SPI.c shared-bindings/busio/SPI.c
msgid "buffer slices must be of equal length"
msgstr ""
#: py/modstruct.c shared-bindings/struct/__init__.c
#: shared-module/struct/__init__.c
msgid "buffer too small"
msgstr ""
#: shared-bindings/socketpool/Socket.c shared-bindings/ssl/SSLSocket.c
msgid "buffer too small for requested bytes"
msgstr ""
#: shared-bindings/adafruit_pixelbuf/PixelBuf.c
msgid "byteorder is not a string"
msgstr ""
#: py/objarray.c
msgid "bytes length not a multiple of item size"
msgstr ""
#: py/objstr.c
msgid "bytes value out of range"
msgstr ""
#: ports/atmel-samd/bindings/samd/Clock.c
msgid "calibration is out of range"
msgstr ""
#: ports/atmel-samd/bindings/samd/Clock.c
msgid "calibration is read only"
msgstr ""
#: shared-module/vectorio/Circle.c shared-module/vectorio/Polygon.c
#: shared-module/vectorio/Rectangle.c
msgid "can only have one parent"
msgstr ""
#: py/emitinlinethumb.c
msgid "can only have up to 4 parameters to Thumb assembly"
msgstr ""
#: py/emitinlinextensa.c
msgid "can only have up to 4 parameters to Xtensa assembly"
msgstr ""
#: py/objtype.c
msgid "can't add special method to already-subclassed class"
msgstr ""
#: py/compile.c
msgid "can't assign to expression"
msgstr ""
#: extmod/moduasyncio.c
msgid "can't cancel self"
msgstr ""
#: py/obj.c py/objint.c shared-bindings/i2ctarget/I2CTarget.c
#: shared-module/adafruit_pixelbuf/PixelBuf.c
msgid "can't convert %q to %q"
msgstr ""
#: py/runtime.c
msgid "can't convert %q to int"
msgstr ""
#: py/obj.c
#, c-format
msgid "can't convert %s to complex"
msgstr ""
#: py/objstr.c
msgid "can't convert '%q' object to %q implicitly"
msgstr ""
#: extmod/ulab/code/numpy/vector.c
msgid "can't convert complex to float"
msgstr ""
#: py/obj.c
msgid "can't convert to %q"
msgstr ""
#: py/obj.c
msgid "can't convert to complex"
msgstr ""
#: py/runtime.c
msgid "can't convert to int"
msgstr ""
#: py/objstr.c
msgid "can't convert to str implicitly"
msgstr ""
#: py/compile.c
msgid "can't declare nonlocal in outer code"
msgstr ""
#: py/compile.c
msgid "can't delete expression"
msgstr ""
#: py/emitnative.c
msgid "can't do binary op between '%q' and '%q'"
msgstr ""
#: py/objcomplex.c
msgid "can't do truncated division of a complex number"
msgstr ""
#: py/compile.c
msgid "can't have multiple **x"
msgstr ""
#: py/compile.c
msgid "can't have multiple *x"
msgstr ""
#: py/emitnative.c
msgid "can't implicitly convert '%q' to 'bool'"
msgstr ""
#: py/emitnative.c
msgid "can't load from '%q'"
msgstr ""
#: py/emitnative.c
msgid "can't load with '%q' index"
msgstr ""
#: py/builtinimport.c
msgid "can't perform relative import"
msgstr ""
#: py/objgenerator.c
msgid "can't send non-None value to a just-started generator"
msgstr ""
#: shared-module/sdcardio/SDCard.c
msgid "can't set 512 block size"
msgstr ""
#: py/objnamedtuple.c
msgid "can't set attribute"
msgstr ""
#: py/emitnative.c
msgid "can't store '%q'"
msgstr ""
#: py/emitnative.c
msgid "can't store to '%q'"
msgstr ""
#: py/emitnative.c
msgid "can't store with '%q' index"
msgstr ""
#: py/objstr.c
msgid ""
"can't switch from automatic field numbering to manual field specification"
msgstr ""
#: py/objstr.c
msgid ""
"can't switch from manual field specification to automatic field numbering"
msgstr ""
#: extmod/ulab/code/ndarray.c
msgid "cannot assign new shape"
msgstr ""
#: extmod/ulab/code/ndarray_operators.c
msgid "cannot cast output with casting rule"
msgstr ""
#: extmod/ulab/code/ndarray.c
msgid "cannot convert complex to dtype"
msgstr ""
#: extmod/ulab/code/ndarray.c
msgid "cannot convert complex type"
msgstr ""
#: py/objtype.c
msgid "cannot create '%q' instances"
msgstr ""
#: py/objtype.c
msgid "cannot create instance"
msgstr ""
#: py/runtime.c
msgid "cannot import name %q"
msgstr ""
#: extmod/moductypes.c
msgid "cannot unambiguously get sizeof scalar"
msgstr ""
#: py/emitnative.c
msgid "casting"
msgstr ""
#: ports/stm/common-hal/pwmio/PWMOut.c
msgid "channel re-init"
msgstr ""
#: shared-bindings/_stage/Text.c
msgid "chars buffer too small"
msgstr ""
#: py/modbuiltins.c
msgid "chr() arg not in range(0x110000)"
msgstr ""
#: py/modbuiltins.c
msgid "chr() arg not in range(256)"
msgstr ""
#: shared-bindings/bitmaptools/__init__.c
msgid "clip point must be (x,y) tuple"
msgstr ""
#: shared-bindings/msgpack/ExtType.c
msgid "code outside range 0~127"
msgstr ""
#: shared-bindings/displayio/Palette.c
msgid "color buffer must be 3 bytes (RGB) or 4 bytes (RGB + pad byte)"
msgstr ""
#: shared-bindings/displayio/Palette.c
msgid "color buffer must be a buffer, tuple, list, or int"
msgstr ""
#: shared-bindings/displayio/Palette.c
msgid "color buffer must be a bytearray or array of type 'b' or 'B'"
msgstr ""
#: shared-bindings/displayio/Palette.c
msgid "color must be between 0x000000 and 0xffffff"
msgstr ""
#: shared-bindings/displayio/ColorConverter.c
msgid "color should be an int"
msgstr ""
#: py/emitnative.c
msgid "comparison of int and uint"
msgstr ""
#: py/objcomplex.c
msgid "complex division by zero"
msgstr ""
#: py/objfloat.c py/parsenum.c
msgid "complex values not supported"
msgstr ""
#: extmod/moduzlib.c
msgid "compression header"
msgstr ""
#: py/parse.c
msgid "constant must be an integer"
msgstr ""
#: py/emitnative.c
msgid "conversion to object"
msgstr ""
#: extmod/ulab/code/numpy/filter.c
msgid "convolve arguments must be linear arrays"
msgstr ""
#: extmod/ulab/code/numpy/filter.c
msgid "convolve arguments must be ndarrays"
msgstr ""
#: extmod/ulab/code/numpy/filter.c
msgid "convolve arguments must not be empty"
msgstr ""
#: extmod/ulab/code/numpy/io/io.c
msgid "corrupted file"
msgstr ""
#: extmod/ulab/code/numpy/poly.c
msgid "could not invert Vandermonde matrix"
msgstr ""
#: shared-module/sdcardio/SDCard.c
msgid "couldn't determine SD card version"
msgstr ""
#: extmod/ulab/code/numpy/numerical.c
msgid "cross is defined for 1D arrays of length 3"
msgstr ""
#: extmod/ulab/code/scipy/optimize/optimize.c
msgid "data must be iterable"
msgstr ""
#: extmod/ulab/code/scipy/optimize/optimize.c
msgid "data must be of equal length"
msgstr ""
#: ports/atmel-samd/common-hal/imagecapture/ParallelImageCapture.c
#, c-format
msgid "data pin #%d in use"
msgstr "data-пин #%d уже используется"
#: extmod/ulab/code/ndarray.c
msgid "data type not understood"
msgstr ""
#: py/parsenum.c
msgid "decimal numbers not supported"
msgstr ""
#: py/compile.c
msgid "default 'except' must be last"
msgstr ""
#: shared-bindings/msgpack/__init__.c
msgid "default is not a function"
msgstr ""
#: shared-bindings/audiobusio/PDMIn.c
msgid ""
"destination buffer must be a bytearray or array of type 'B' for bit_depth = 8"
msgstr ""
#: shared-bindings/audiobusio/PDMIn.c
msgid "destination buffer must be an array of type 'H' for bit_depth = 16"
msgstr ""
#: shared-bindings/audiobusio/PDMIn.c
msgid "destination_length must be an int >= 0"
msgstr ""
#: py/objdict.c
msgid "dict update sequence has wrong length"
msgstr ""
#: extmod/ulab/code/numpy/numerical.c
msgid "diff argument must be an ndarray"
msgstr ""
#: extmod/ulab/code/numpy/numerical.c
msgid "differentiation order out of range"
msgstr ""
#: extmod/ulab/code/numpy/transform.c
msgid "dimensions do not match"
msgstr ""
#: py/emitnative.c
msgid "div/mod not implemented for uint"
msgstr ""
#: py/objfloat.c py/objint_mpz.c
msgid "divide by zero"
msgstr ""
#: py/modmath.c py/objint_longlong.c py/runtime.c
#: shared-bindings/math/__init__.c
msgid "division by zero"
msgstr ""
#: extmod/ulab/code/numpy/vector.c
msgid "dtype must be float, or complex"
msgstr ""
#: py/objdeque.c
msgid "empty"
msgstr ""
#: extmod/ulab/code/numpy/io/io.c
msgid "empty file"
msgstr ""
#: extmod/moduasyncio.c extmod/moduheapq.c extmod/modutimeq.c
msgid "empty heap"
msgstr ""
#: py/objstr.c
msgid "empty separator"
msgstr ""
#: shared-bindings/random/__init__.c
msgid "empty sequence"
msgstr ""
#: py/objstr.c
msgid "end of format while looking for conversion specifier"
msgstr ""
#: shared-bindings/displayio/Shape.c
msgid "end_x should be an int"
msgstr ""
#: shared-bindings/alarm/time/TimeAlarm.c
msgid "epoch_time not supported on this board"
msgstr ""
#: ports/nrf/common-hal/busio/UART.c
#, c-format
msgid "error = 0x%08lX"
msgstr ""
#: py/runtime.c
msgid "exceptions must derive from BaseException"
msgstr ""
#: shared-bindings/canio/CAN.c
msgid "expected '%q' but got '%q'"
msgstr ""
#: shared-bindings/canio/CAN.c
msgid "expected '%q' or '%q' but got '%q'"
msgstr ""
#: py/objstr.c
msgid "expected ':' after format specifier"
msgstr ""
#: py/obj.c
msgid "expected tuple/list"
msgstr ""
#: py/modthread.c
msgid "expecting a dict for keyword args"
msgstr ""
#: py/compile.c
msgid "expecting an assembler instruction"
msgstr ""
#: py/compile.c
msgid "expecting just a value for set"
msgstr ""
#: py/compile.c
msgid "expecting key:value for dict"
msgstr ""
#: shared-bindings/msgpack/__init__.c
msgid "ext_hook is not a function"
msgstr ""
#: py/argcheck.c
msgid "extra keyword arguments given"
msgstr ""
#: py/argcheck.c
msgid "extra positional arguments given"
msgstr ""
#: shared-bindings/audiocore/WaveFile.c shared-bindings/audiomp3/MP3Decoder.c
#: shared-bindings/displayio/OnDiskBitmap.c shared-bindings/synthio/__init__.c
#: shared-module/gifio/GifWriter.c
msgid "file must be a file opened in byte mode"
msgstr ""
#: shared-bindings/traceback/__init__.c
msgid "file write is not available"
msgstr ""
#: shared-bindings/storage/__init__.c
msgid "filesystem must provide mount method"
msgstr ""
#: extmod/ulab/code/numpy/vector.c
msgid "first argument must be a callable"
msgstr ""
#: extmod/ulab/code/scipy/optimize/optimize.c
msgid "first argument must be a function"
msgstr ""
#: extmod/ulab/code/numpy/create.c
msgid "first argument must be a tuple of ndarrays"
msgstr ""
#: extmod/ulab/code/numpy/transform.c extmod/ulab/code/numpy/vector.c
msgid "first argument must be an ndarray"
msgstr ""
#: py/objtype.c
msgid "first argument to super() must be type"
msgstr ""
#: extmod/ulab/code/scipy/linalg/linalg.c
msgid "first two arguments must be ndarrays"
msgstr ""
#: extmod/ulab/code/ndarray.c
msgid "flattening order must be either 'C', or 'F'"
msgstr ""
#: extmod/ulab/code/numpy/numerical.c
msgid "flip argument must be an ndarray"
msgstr ""
#: py/objint.c
msgid "float too big"
msgstr ""
#: py/nativeglue.c
msgid "float unsupported"
msgstr ""
#: shared-bindings/_stage/Text.c
msgid "font must be 2048 bytes long"
msgstr ""
#: py/objstr.c
msgid "format requires a dict"
msgstr ""
#: shared-bindings/microcontroller/Processor.c
msgid "frequency is read-only for this board"
msgstr ""
#: py/objdeque.c
msgid "full"
msgstr ""
#: py/argcheck.c
msgid "function doesn't take keyword arguments"
msgstr ""
#: py/argcheck.c
#, c-format
msgid "function expected at most %d arguments, got %d"
msgstr ""
#: py/bc.c py/objnamedtuple.c
msgid "function got multiple values for argument '%q'"
msgstr ""
#: extmod/ulab/code/scipy/optimize/optimize.c
msgid "function has the same sign at the ends of interval"
msgstr ""
#: extmod/ulab/code/ndarray.c
msgid "function is defined for ndarrays only"
msgstr ""
#: extmod/ulab/code/numpy/carray/carray.c
msgid "function is implemented for ndarrays only"
msgstr ""
#: py/argcheck.c
#, c-format
msgid "function missing %d required positional arguments"
msgstr ""
#: py/bc.c
msgid "function missing keyword-only argument"
msgstr ""
#: py/bc.c
msgid "function missing required keyword argument '%q'"
msgstr ""
#: py/bc.c
#, c-format
msgid "function missing required positional argument #%d"
msgstr ""
#: py/argcheck.c py/bc.c py/objnamedtuple.c shared-bindings/time/__init__.c
#, c-format
msgid "function takes %d positional arguments but %d were given"
msgstr ""
#: shared-bindings/time/__init__.c
msgid "function takes exactly 9 arguments"
msgstr ""
#: py/objgenerator.c
msgid "generator already executing"
msgstr ""
#: py/objgenerator.c
msgid "generator ignored GeneratorExit"
msgstr ""
#: py/objgenerator.c py/runtime.c
msgid "generator raised StopIteration"
msgstr ""
#: shared-bindings/_stage/Layer.c
msgid "graphic must be 2048 bytes long"
msgstr ""
#: extmod/moduhashlib.c
msgid "hash is final"
msgstr ""
#: extmod/moduheapq.c
msgid "heap must be a list"
msgstr ""
#: py/compile.c
msgid "identifier redefined as global"
msgstr ""
#: py/compile.c
msgid "identifier redefined as nonlocal"
msgstr ""
#: py/compile.c
msgid "import * not at module level"
msgstr ""
#: py/persistentcode.c
msgid "incompatible native .mpy architecture"
msgstr ""
#: py/objstr.c
msgid "incomplete format"
msgstr ""
#: py/objstr.c
msgid "incomplete format key"
msgstr ""
#: extmod/modubinascii.c
msgid "incorrect padding"
msgstr ""
#: extmod/ulab/code/ndarray.c extmod/ulab/code/numpy/transform.c
msgid "index is out of bounds"
msgstr ""
#: extmod/ulab/code/numpy/numerical.c extmod/ulab/code/ulab_tools.c
#: ports/espressif/common-hal/pulseio/PulseIn.c py/obj.c
#: shared-bindings/bitmaptools/__init__.c
msgid "index out of range"
msgstr ""
#: py/obj.c
msgid "indices must be integers"
msgstr ""
#: extmod/ulab/code/ndarray.c
msgid "indices must be integers, slices, or Boolean lists"
msgstr ""
#: ports/espressif/common-hal/busio/I2C.c
msgid "init I2C"
msgstr ""
#: extmod/ulab/code/scipy/optimize/optimize.c
msgid "initial values must be iterable"
msgstr ""
#: shared-bindings/_bleio/Characteristic.c shared-bindings/_bleio/Descriptor.c
msgid "initial_value length is wrong"
msgstr ""
#: py/compile.c
msgid "inline assembler must be a function"
msgstr ""
#: extmod/ulab/code/ndarray.c
msgid "input and output shapes are not compatible"
msgstr ""
#: extmod/ulab/code/numpy/create.c
msgid "input argument must be an integer, a tuple, or a list"
msgstr ""
#: extmod/ulab/code/numpy/fft/fft_tools.c
msgid "input array length must be power of 2"
msgstr ""
#: extmod/ulab/code/numpy/create.c
msgid "input arrays are not compatible"
msgstr ""
#: extmod/ulab/code/numpy/poly.c
msgid "input data must be an iterable"
msgstr ""
#: extmod/ulab/code/numpy/vector.c
msgid "input dtype must be float or complex"
msgstr ""
#: extmod/ulab/code/numpy/linalg/linalg.c
msgid "input matrix is asymmetric"
msgstr ""
#: extmod/ulab/code/numpy/linalg/linalg.c
#: extmod/ulab/code/scipy/linalg/linalg.c
msgid "input matrix is singular"
msgstr ""
#: extmod/ulab/code/numpy/create.c
msgid "input must be 1- or 2-d"
msgstr ""
#: extmod/ulab/code/numpy/carray/carray.c
msgid "input must be a 1D ndarray"
msgstr ""
#: extmod/ulab/code/scipy/linalg/linalg.c extmod/ulab/code/user/user.c
msgid "input must be a dense ndarray"
msgstr ""
#: extmod/ulab/code/user/user.c
msgid "input must be an ndarray"
msgstr ""
#: extmod/ulab/code/numpy/carray/carray.c
msgid "input must be an ndarray, or a scalar"
msgstr ""
#: extmod/ulab/code/scipy/signal/signal.c
msgid "input must be one-dimensional"
msgstr ""
#: extmod/ulab/code/ulab_tools.c
msgid "input must be square matrix"
msgstr ""
#: extmod/ulab/code/numpy/numerical.c
msgid "input must be tuple, list, range, or ndarray"
msgstr ""
#: extmod/ulab/code/numpy/poly.c
msgid "input vectors must be of equal length"
msgstr ""
#: extmod/ulab/code/numpy/poly.c
msgid "inputs are not iterable"
msgstr ""
#: py/parsenum.c
msgid "int() arg 2 must be >= 2 and <= 36"
msgstr ""
#: extmod/ulab/code/numpy/approx.c
msgid "interp is defined for 1D iterables of equal length"
msgstr ""
#: shared-bindings/_bleio/Adapter.c
#, c-format
msgid "interval must be in range %s-%s"
msgstr ""
#: py/compile.c
msgid "invalid architecture"
msgstr ""
#: shared-bindings/bitmaptools/__init__.c
#, c-format
msgid "invalid bits_per_pixel %d, must be, 1, 2, 4, 8, 16, 24, or 32"
msgstr ""
#: shared-bindings/bitmaptools/__init__.c
#, c-format
msgid "invalid element size %d for bits_per_pixel %d\n"
msgstr ""
#: shared-bindings/bitmaptools/__init__.c
#, c-format
msgid "invalid element_size %d, must be, 1, 2, or 4"
msgstr ""
#: shared-bindings/traceback/__init__.c
msgid "invalid exception"
msgstr ""
#: extmod/modframebuf.c
msgid "invalid format"
msgstr ""
#: py/objstr.c
msgid "invalid format specifier"
msgstr ""
#: shared-bindings/wifi/Radio.c
msgid "invalid hostname"
msgstr ""
#: py/compile.c
msgid "invalid micropython decorator"
msgstr ""
#: ports/espressif/common-hal/esp32_camera/Camera.c
msgid "invalid setting"
msgstr ""
#: shared-bindings/random/__init__.c
msgid "invalid step"
msgstr ""
#: py/compile.c py/parse.c
msgid "invalid syntax"
msgstr ""
#: py/parsenum.c
msgid "invalid syntax for integer"
msgstr ""
#: py/parsenum.c
#, c-format
msgid "invalid syntax for integer with base %d"
msgstr ""
#: py/parsenum.c
msgid "invalid syntax for number"
msgstr ""
#: py/objexcept.c
msgid "invalid traceback"
msgstr ""
#: py/objtype.c
msgid "issubclass() arg 1 must be a class"
msgstr ""
#: py/objtype.c
msgid "issubclass() arg 2 must be a class or a tuple of classes"
msgstr ""
#: extmod/ulab/code/numpy/linalg/linalg.c
msgid "iterations did not converge"
msgstr ""
#: py/objstr.c
msgid "join expects a list of str/bytes objects consistent with self object"
msgstr ""
#: py/argcheck.c
msgid "keyword argument(s) not yet implemented - use normal args instead"
msgstr ""
#: py/bc.c
msgid "keywords must be strings"
msgstr ""
#: py/emitinlinethumb.c py/emitinlinextensa.c
msgid "label '%q' not defined"
msgstr ""
#: py/compile.c
msgid "label redefined"
msgstr ""
#: py/stream.c
msgid "length argument not allowed for this type"
msgstr ""
#: shared-bindings/audiomixer/MixerVoice.c
msgid "level must be between 0 and 1"
msgstr ""
#: py/objarray.c
msgid "lhs and rhs should be compatible"
msgstr ""
#: py/emitnative.c
msgid "local '%q' has type '%q' but source is '%q'"
msgstr ""
#: py/emitnative.c
msgid "local '%q' used before type known"
msgstr ""
#: py/vm.c
msgid "local variable referenced before assignment"
msgstr ""
#: py/objint.c
msgid "long int not supported in this build"
msgstr ""
#: ports/espressif/common-hal/canio/CAN.c
msgid "loopback + silent mode not supported by peripheral"
msgstr ""
#: ports/espressif/common-hal/mdns/Server.c
msgid "mDNS already initialized"
msgstr ""
#: ports/espressif/common-hal/mdns/Server.c
msgid "mDNS only works with built-in WiFi"
msgstr ""
#: py/parse.c
msgid "malformed f-string"
msgstr ""
#: shared-bindings/_stage/Layer.c
msgid "map buffer too small"
msgstr ""
#: py/modmath.c shared-bindings/math/__init__.c
msgid "math domain error"
msgstr ""
#: extmod/ulab/code/numpy/linalg/linalg.c
msgid "matrix is not positive definite"
msgstr ""
#: ports/espressif/common-hal/_bleio/Descriptor.c
#: ports/nrf/common-hal/_bleio/Characteristic.c
#: ports/nrf/common-hal/_bleio/Descriptor.c
#, c-format
msgid "max_length must be 0-%d when fixed_length is %s"
msgstr ""
#: extmod/ulab/code/ndarray.c
msgid "maximum number of dimensions is "
msgstr ""
#: py/runtime.c
msgid "maximum recursion depth exceeded"
msgstr ""
#: extmod/ulab/code/scipy/optimize/optimize.c
msgid "maxiter must be > 0"
msgstr ""
#: extmod/ulab/code/scipy/optimize/optimize.c
msgid "maxiter should be > 0"
msgstr ""
#: extmod/ulab/code/numpy/numerical.c
msgid "median argument must be an ndarray"
msgstr ""
#: py/runtime.c
#, c-format
msgid "memory allocation failed, allocating %u bytes"
msgstr ""
#: py/runtime.c
msgid "memory allocation failed, heap is locked"
msgstr ""
#: py/objarray.c
msgid "memoryview: length is not a multiple of itemsize"
msgstr ""
#: extmod/ulab/code/numpy/linalg/linalg.c
msgid "mode must be complete, or reduced"
msgstr ""
#: py/builtinimport.c
msgid "module not found"
msgstr ""
#: ports/espressif/common-hal/wifi/Monitor.c
msgid "monitor init failed"
msgstr ""
#: extmod/ulab/code/numpy/poly.c
msgid "more degrees of freedom than data points"
msgstr ""
#: py/compile.c
msgid "multiple *x in assignment"
msgstr ""
#: py/objtype.c
msgid "multiple bases have instance lay-out conflict"
msgstr ""
#: py/objtype.c
msgid "multiple inheritance not supported"
msgstr ""
#: py/emitnative.c
msgid "must raise an object"
msgstr ""
#: py/modbuiltins.c
msgid "must use keyword argument for key function"
msgstr ""
#: py/runtime.c
msgid "name '%q' is not defined"
msgstr ""
#: py/runtime.c
msgid "name not defined"
msgstr ""
#: py/asmthumb.c
msgid "native method too big"
msgstr ""
#: py/emitnative.c
msgid "native yield"
msgstr ""
#: py/runtime.c
#, c-format
msgid "need more than %d values to unpack"
msgstr ""
#: py/modmath.c
msgid "negative factorial"
msgstr ""
#: py/objint_longlong.c py/objint_mpz.c py/runtime.c
msgid "negative power with no float support"
msgstr ""
#: py/objint_mpz.c py/runtime.c
msgid "negative shift count"
msgstr ""
#: shared-module/sdcardio/SDCard.c
msgid "no SD card"
msgstr ""
#: py/vm.c
msgid "no active exception to reraise"
msgstr ""
#: py/compile.c
msgid "no binding for nonlocal found"
msgstr ""
#: shared-module/msgpack/__init__.c
msgid "no default packer"
msgstr ""
#: extmod/modurandom.c
msgid "no default seed"
msgstr ""
#: py/builtinimport.c
msgid "no module named '%q'"
msgstr ""
#: shared-bindings/displayio/FourWire.c shared-bindings/displayio/I2CDisplay.c
#: shared-bindings/paralleldisplay/ParallelBus.c
msgid "no reset pin available"
msgstr "нет доступного контакта сброса"
#: shared-module/sdcardio/SDCard.c
msgid "no response from SD card"
msgstr ""
#: ports/espressif/common-hal/esp32_camera/Camera.c py/objobject.c py/runtime.c
msgid "no such attribute"
msgstr ""
#: shared-bindings/usb_hid/__init__.c
msgid "non-Device in %q"
msgstr ""
#: ports/espressif/common-hal/_bleio/Connection.c
#: ports/nrf/common-hal/_bleio/Connection.c
msgid "non-UUID found in service_uuids_whitelist"
msgstr ""
#: py/compile.c
msgid "non-default argument follows default argument"
msgstr ""
#: extmod/modubinascii.c
msgid "non-hex digit found"
msgstr ""
#: py/compile.c
msgid "non-keyword arg after */**"
msgstr ""
#: py/compile.c
msgid "non-keyword arg after keyword arg"
msgstr ""
#: ports/nrf/common-hal/_bleio/Adapter.c
msgid "non-zero timeout must be > 0.01"
msgstr ""
#: shared-bindings/_bleio/Adapter.c
msgid "non-zero timeout must be >= interval"
msgstr ""
#: shared-bindings/_bleio/UUID.c
msgid "not a 128-bit UUID"
msgstr ""
#: py/objstr.c
msgid "not all arguments converted during string formatting"
msgstr ""
#: py/objstr.c
msgid "not enough arguments for format string"
msgstr ""
#: extmod/ulab/code/numpy/carray/carray_tools.c
msgid "not implemented for complex dtype"
msgstr ""
#: extmod/ulab/code/numpy/create.c
msgid "number of points must be at least 2"
msgstr ""
#: py/builtinhelp.c
msgid "object "
msgstr ""
#: py/obj.c
#, c-format
msgid "object '%s' isn't a tuple or list"
msgstr ""
#: py/obj.c
msgid "object doesn't support item assignment"
msgstr ""
#: py/obj.c
msgid "object doesn't support item deletion"
msgstr ""
#: py/obj.c
msgid "object has no len"
msgstr ""
#: py/obj.c
msgid "object isn't subscriptable"
msgstr ""
#: py/runtime.c
msgid "object not an iterator"
msgstr ""
#: py/objtype.c py/runtime.c
msgid "object not callable"
msgstr ""
#: py/sequence.c shared-bindings/displayio/Group.c
msgid "object not in sequence"
msgstr ""
#: py/runtime.c
msgid "object not iterable"
msgstr ""
#: py/obj.c
#, c-format
msgid "object of type '%s' has no len()"
msgstr ""
#: py/obj.c
msgid "object with buffer protocol required"
msgstr ""
#: extmod/modubinascii.c
msgid "odd-length string"
msgstr ""
#: supervisor/shared/web_workflow/web_workflow.c
msgid "off"
msgstr ""
#: extmod/ulab/code/utils/utils.c
msgid "offset is too large"
msgstr ""
#: shared-bindings/dualbank/__init__.c
msgid "offset must be >= 0"
msgstr ""
#: extmod/ulab/code/numpy/create.c
msgid "offset must be non-negative and no greater than buffer length"
msgstr ""
#: py/objstr.c py/objstrunicode.c
msgid "offset out of bounds"
msgstr ""
#: ports/nrf/common-hal/audiobusio/PDMIn.c
msgid "only bit_depth=16 is supported"
msgstr ""
#: ports/nrf/common-hal/audiobusio/PDMIn.c
msgid "only sample_rate=16000 is supported"
msgstr ""
#: py/objarray.c py/objstr.c py/objstrunicode.c py/objtuple.c
#: shared-bindings/alarm/SleepMemory.c shared-bindings/nvm/ByteArray.c
msgid "only slices with step=1 (aka None) are supported"
msgstr ""
#: py/vm.c
msgid "opcode"
msgstr ""
#: extmod/ulab/code/ndarray.c extmod/ulab/code/numpy/compare.c
#: extmod/ulab/code/numpy/vector.c
msgid "operands could not be broadcast together"
msgstr ""
#: extmod/ulab/code/numpy/linalg/linalg.c
msgid "operation is defined for 2D arrays only"
msgstr ""
#: extmod/ulab/code/numpy/linalg/linalg.c
msgid "operation is defined for ndarrays only"
msgstr ""
#: extmod/ulab/code/ndarray.c
msgid "operation is implemented for 1D Boolean arrays only"
msgstr ""
#: extmod/ulab/code/numpy/numerical.c
msgid "operation is not implemented on ndarrays"
msgstr ""
#: extmod/ulab/code/ndarray.c
msgid "operation is not supported for given type"
msgstr ""
#: py/modbuiltins.c
msgid "ord expects a character"
msgstr ""
#: py/modbuiltins.c
#, c-format
msgid "ord() expected a character, but string of length %d found"
msgstr ""
#: extmod/ulab/code/utils/utils.c
msgid "out array is too small"
msgstr ""
#: extmod/ulab/code/utils/utils.c
msgid "out must be a float dense array"
msgstr ""
#: shared-bindings/displayio/Bitmap.c
msgid "out of range of source"
msgstr ""
#: shared-bindings/bitmaptools/__init__.c shared-bindings/displayio/Bitmap.c
msgid "out of range of target"
msgstr ""
#: py/objint_mpz.c
msgid "overflow converting long int to machine word"
msgstr ""
#: py/modstruct.c
#, c-format
msgid "pack expected %d items for packing (got %d)"
msgstr ""
#: shared-bindings/_stage/Layer.c shared-bindings/_stage/Text.c
msgid "palette must be 32 bytes long"
msgstr ""
#: shared-bindings/displayio/Palette.c
msgid "palette_index should be an int"
msgstr ""
#: py/emitinlinextensa.c
msgid "parameters must be registers in sequence a2 to a5"
msgstr ""
#: py/emitinlinethumb.c
msgid "parameters must be registers in sequence r0 to r3"
msgstr ""
#: shared-bindings/bitmaptools/__init__.c shared-bindings/displayio/Bitmap.c
msgid "pixel coordinates out of bounds"
msgstr ""
#: shared-bindings/displayio/Bitmap.c
msgid "pixel value requires too many bits"
msgstr ""
#: shared-bindings/displayio/TileGrid.c shared-bindings/vectorio/VectorShape.c
msgid "pixel_shader must be displayio.Palette or displayio.ColorConverter"
msgstr ""
#: extmod/vfs_posix_file.c
msgid "poll on file not available on win32"
msgstr ""
#: ports/espressif/common-hal/pulseio/PulseIn.c
msgid "pop from an empty PulseIn"
msgstr ""
#: ports/atmel-samd/common-hal/pulseio/PulseIn.c
#: ports/cxd56/common-hal/pulseio/PulseIn.c
#: ports/nrf/common-hal/pulseio/PulseIn.c
#: ports/raspberrypi/common-hal/pulseio/PulseIn.c
#: ports/stm/common-hal/pulseio/PulseIn.c py/objdict.c py/objlist.c py/objset.c
#: shared-bindings/ps2io/Ps2.c
msgid "pop from empty %q"
msgstr ""
#: shared-bindings/socketpool/Socket.c shared-bindings/ssl/SSLSocket.c
msgid "port must be >= 0"
msgstr ""
#: py/objint_mpz.c
msgid "pow() 3rd argument cannot be 0"
msgstr ""
#: py/objint_mpz.c
msgid "pow() with 3 arguments requires integers"
msgstr ""
#: ports/espressif/boards/adafruit_qtpy_esp32_pico/mpconfigboard.h
msgid "pressing BOOT button at start up.\n"
msgstr ""
#: ports/espressif/boards/adafruit_feather_esp32_v2/mpconfigboard.h
msgid "pressing SW38 button at start up.\n"
msgstr ""
#: ports/espressif/boards/hardkernel_odroid_go/mpconfigboard.h
msgid "pressing VOLUME button at start up.\n"
msgstr ""
#: ports/espressif/boards/adafruit_qtpy_esp32c3/mpconfigboard.h
#: ports/espressif/boards/beetle-esp32-c3/mpconfigboard.h
#: ports/espressif/boards/lolin_c3_mini/mpconfigboard.h
#: supervisor/shared/safe_mode.c
msgid "pressing boot button at start up.\n"
msgstr ""
#: ports/atmel-samd/boards/circuitplayground_express/mpconfigboard.h
#: ports/atmel-samd/boards/circuitplayground_express_crickit/mpconfigboard.h
#: ports/atmel-samd/boards/circuitplayground_express_displayio/mpconfigboard.h
#: ports/atmel-samd/boards/escornabot_makech/mpconfigboard.h
#: ports/atmel-samd/boards/meowmeow/mpconfigboard.h
msgid "pressing both buttons at start up.\n"
msgstr ""
#: ports/nrf/boards/aramcon2_badge/mpconfigboard.h
msgid "pressing the left button at start up\n"
msgstr ""
#: ports/raspberrypi/common-hal/rp2pio/StateMachine.c
msgid "pull masks conflict with direction masks"
msgstr ""
#: extmod/modutimeq.c
msgid "queue overflow"
msgstr ""
#: py/parse.c
msgid "raw f-strings are not supported"
msgstr ""
#: extmod/ulab/code/numpy/fft/fft_tools.c
msgid "real and imaginary parts must be of equal length"
msgstr ""
#: py/builtinimport.c
msgid "relative import"
msgstr ""
#: py/obj.c
#, c-format
msgid "requested length %d but object has length %d"
msgstr ""
#: extmod/ulab/code/ndarray_operators.c
msgid "results cannot be cast to specified type"
msgstr ""
#: py/compile.c
msgid "return annotation must be an identifier"
msgstr ""
#: py/emitnative.c
msgid "return expected '%q' but got '%q'"
msgstr ""
#: shared-bindings/rgbmatrix/RGBMatrix.c
#, c-format
msgid "rgb_pins[%d] duplicates another pin assignment"
msgstr "rgb_pins[%d] дублирует другое назначение пинов"
#: shared-bindings/rgbmatrix/RGBMatrix.c
#, c-format
msgid "rgb_pins[%d] is not on the same port as clock"
msgstr "rgb_pins[%d] не находится на том же порту, что и clock"
#: extmod/ulab/code/numpy/numerical.c
msgid "roll argument must be an ndarray"
msgstr ""
#: py/objstr.c
msgid "rsplit(None,n)"
msgstr ""
#: shared-bindings/audiocore/RawSample.c
msgid ""
"sample_source buffer must be a bytearray or array of type 'h', 'H', 'b' or "
"'B'"
msgstr ""
#: ports/atmel-samd/common-hal/audiobusio/PDMIn.c
#: ports/raspberrypi/common-hal/audiobusio/PDMIn.c
msgid "sampling rate out of range"
msgstr ""
#: py/modmicropython.c
msgid "schedule queue full"
msgstr ""
#: py/builtinimport.c
msgid "script compilation not supported"
msgstr ""
#: py/nativeglue.c
msgid "set unsupported"
msgstr ""
#: extmod/ulab/code/ndarray.c
msgid "shape must be a tuple"
msgstr ""
#: shared-module/msgpack/__init__.c
msgid "short read"
msgstr ""
#: py/objstr.c
msgid "sign not allowed in string format specifier"
msgstr ""
#: py/objstr.c
msgid "sign not allowed with integer format specifier 'c'"
msgstr ""
#: py/objstr.c
msgid "single '}' encountered in format string"
msgstr ""
#: extmod/ulab/code/ulab_tools.c
msgid "size is defined for ndarrays only"
msgstr ""
#: shared-bindings/time/__init__.c
msgid "sleep length must be non-negative"
msgstr ""
#: extmod/ulab/code/ndarray.c
msgid "slice step can't be zero"
msgstr ""
#: py/objslice.c
msgid "slice step cannot be zero"
msgstr ""
#: py/nativeglue.c
msgid "slice unsupported"
msgstr ""
#: py/objint.c py/sequence.c
msgid "small int overflow"
msgstr ""
#: main.c
msgid "soft reboot\n"
msgstr ""
#: extmod/ulab/code/numpy/numerical.c
msgid "sort argument must be an ndarray"
msgstr ""
#: extmod/ulab/code/scipy/signal/signal.c
msgid "sos array must be of shape (n_section, 6)"
msgstr ""
#: extmod/ulab/code/scipy/signal/signal.c
msgid "sos[:, 3] should be all ones"
msgstr ""
#: extmod/ulab/code/scipy/signal/signal.c
msgid "sosfilt requires iterable arguments"
msgstr ""
#: shared-bindings/bitmaptools/__init__.c shared-bindings/displayio/Bitmap.c
msgid "source palette too large"
msgstr ""
#: shared-bindings/bitmaptools/__init__.c
msgid "source_bitmap must have value_count of 2 or 65536"
msgstr ""
#: shared-bindings/bitmaptools/__init__.c
msgid "source_bitmap must have value_count of 65536"
msgstr ""
#: shared-bindings/bitmaptools/__init__.c
msgid "source_bitmap must have value_count of 8"
msgstr ""
#: py/objstr.c
msgid "start/end indices"
msgstr ""
#: shared-bindings/displayio/Shape.c
msgid "start_x should be an int"
msgstr ""
#: shared-bindings/random/__init__.c
msgid "step must be non-zero"
msgstr ""
#: shared-bindings/random/__init__.c
msgid "stop not reachable from start"
msgstr ""
#: py/stream.c shared-bindings/getpass/__init__.c
msgid "stream operation not supported"
msgstr ""
#: py/objstrunicode.c
msgid "string indices must be integers, not %q"
msgstr ""
#: py/stream.c
msgid "string not supported; use bytes or bytearray"
msgstr ""
#: extmod/moductypes.c
msgid "struct: can't index"
msgstr ""
#: extmod/moductypes.c
msgid "struct: index out of range"
msgstr ""
#: extmod/moductypes.c
msgid "struct: no fields"
msgstr ""
#: py/objarray.c py/objstr.c
msgid "substring not found"
msgstr ""
#: py/compile.c
msgid "super() can't find self"
msgstr ""
#: extmod/modujson.c
msgid "syntax error in JSON"
msgstr ""
#: extmod/moductypes.c
msgid "syntax error in uctypes descriptor"
msgstr ""
#: shared-bindings/touchio/TouchIn.c
msgid "threshold must be in the range 0-65536"
msgstr ""
#: shared-bindings/time/__init__.c
msgid "time.struct_time() takes a 9-sequence"
msgstr ""
#: ports/atmel-samd/common-hal/watchdog/WatchDogTimer.c
#: ports/espressif/common-hal/watchdog/WatchDogTimer.c
#: ports/nrf/common-hal/watchdog/WatchDogTimer.c
#: ports/raspberrypi/common-hal/watchdog/WatchDogTimer.c
msgid "timeout duration exceeded the maximum supported value"
msgstr ""
#: shared-bindings/busio/UART.c
msgid "timeout must be 0.0-100.0 seconds"
msgstr ""
#: ports/nrf/common-hal/_bleio/Adapter.c
msgid "timeout must be < 655.35 secs"
msgstr ""
#: shared-module/sdcardio/SDCard.c
msgid "timeout waiting for v1 card"
msgstr ""
#: shared-module/sdcardio/SDCard.c
msgid "timeout waiting for v2 card"
msgstr ""
#: ports/stm/common-hal/pwmio/PWMOut.c
msgid "timer re-init"
msgstr ""
#: shared-bindings/time/__init__.c
msgid "timestamp out of range for platform time_t"
msgstr ""
#: extmod/ulab/code/ndarray.c
msgid "tobytes can be invoked for dense arrays only"
msgstr ""
#: shared-module/struct/__init__.c
msgid "too many arguments provided with the given format"
msgstr ""
#: extmod/ulab/code/ndarray.c extmod/ulab/code/numpy/create.c
msgid "too many dimensions"
msgstr ""
#: extmod/ulab/code/ndarray.c
msgid "too many indices"
msgstr ""
#: py/asmthumb.c
msgid "too many locals for native method"
msgstr ""
#: py/runtime.c
#, c-format
msgid "too many values to unpack (expected %d)"
msgstr ""
#: extmod/ulab/code/numpy/approx.c
msgid "trapz is defined for 1D arrays of equal length"
msgstr ""
#: extmod/ulab/code/numpy/approx.c
msgid "trapz is defined for 1D iterables"
msgstr ""
#: py/obj.c
msgid "tuple/list has wrong length"
msgstr ""
#: ports/espressif/common-hal/canio/CAN.c
#, c-format
msgid "twai_driver_install returned esp-idf error #%d"
msgstr ""
#: ports/espressif/common-hal/canio/CAN.c
#, c-format
msgid "twai_start returned esp-idf error #%d"
msgstr ""
#: ports/atmel-samd/common-hal/busio/UART.c
#: ports/espressif/common-hal/busio/UART.c ports/nrf/common-hal/busio/UART.c
#: shared-bindings/busio/UART.c shared-bindings/canio/CAN.c
msgid "tx and rx cannot both be None"
msgstr ""
#: py/objtype.c
msgid "type '%q' is not an acceptable base type"
msgstr ""
#: py/objtype.c
msgid "type is not an acceptable base type"
msgstr ""
#: py/runtime.c
msgid "type object '%q' has no attribute '%q'"
msgstr ""
#: py/objgenerator.c
msgid "type object 'generator' has no attribute '__await__'"
msgstr ""
#: py/objtype.c
msgid "type takes 1 or 3 arguments"
msgstr ""
#: py/objint_longlong.c
msgid "ulonglong too large"
msgstr ""
#: py/emitnative.c
msgid "unary op %q not implemented"
msgstr ""
#: py/parse.c
msgid "unexpected indent"
msgstr ""
#: py/bc.c
msgid "unexpected keyword argument"
msgstr ""
#: py/bc.c py/objnamedtuple.c
msgid "unexpected keyword argument '%q'"
msgstr ""
#: py/lexer.c
msgid "unicode name escapes"
msgstr ""
#: py/parse.c
msgid "unindent doesn't match any outer indent level"
msgstr ""
#: py/objstr.c
#, c-format
msgid "unknown conversion specifier %c"
msgstr ""
#: py/objstr.c
msgid "unknown format code '%c' for object of type '%q'"
msgstr ""
#: py/compile.c
msgid "unknown type"
msgstr ""
#: py/compile.c
msgid "unknown type '%q'"
msgstr ""
#: py/objstr.c
msgid "unmatched '{' in format"
msgstr ""
#: py/objtype.c py/runtime.c
msgid "unreadable attribute"
msgstr ""
#: shared-bindings/displayio/TileGrid.c shared-bindings/vectorio/VectorShape.c
#: shared-module/vectorio/Polygon.c shared-module/vectorio/VectorShape.c
msgid "unsupported %q type"
msgstr ""
#: py/emitinlinethumb.c
#, c-format
msgid "unsupported Thumb instruction '%s' with %d arguments"
msgstr ""
#: py/emitinlinextensa.c
#, c-format
msgid "unsupported Xtensa instruction '%s' with %d arguments"
msgstr ""
#: shared-module/gifio/GifWriter.c
msgid "unsupported colorspace for GifWriter"
msgstr ""
#: shared-bindings/bitmaptools/__init__.c
msgid "unsupported colorspace for dither"
msgstr ""
#: py/objstr.c
#, c-format
msgid "unsupported format character '%c' (0x%x) at index %d"
msgstr ""
#: py/runtime.c
msgid "unsupported type for %q: '%q'"
msgstr ""
#: py/runtime.c
msgid "unsupported type for operator"
msgstr ""
#: py/runtime.c
msgid "unsupported types for %q: '%q', '%q'"
msgstr ""
#: extmod/ulab/code/numpy/io/io.c
msgid "usecols is too high"
msgstr ""
#: extmod/ulab/code/numpy/io/io.c
msgid "usecols keyword must be specified"
msgstr ""
#: py/objint.c
#, c-format
msgid "value must fit in %d byte(s)"
msgstr ""
#: shared-bindings/bitmaptools/__init__.c
msgid "value out of range of target"
msgstr ""
#: shared-bindings/displayio/Bitmap.c
msgid "value_count must be > 0"
msgstr ""
#: ports/espressif/common-hal/watchdog/WatchDogTimer.c
msgid "watchdog not initialized"
msgstr ""
#: shared-bindings/watchdog/WatchDogTimer.c
msgid "watchdog timeout must be greater than 0"
msgstr ""
#: shared-bindings/is31fl3741/FrameBuffer.c
msgid "width must be greater than zero"
msgstr ""
#: ports/espressif/common-hal/wifi/Radio.c
msgid "wifi is not enabled"
msgstr ""
#: shared-bindings/_bleio/Adapter.c
msgid "window must be <= interval"
msgstr ""
#: extmod/ulab/code/numpy/numerical.c
msgid "wrong axis index"
msgstr ""
#: extmod/ulab/code/numpy/create.c
msgid "wrong axis specified"
msgstr ""
#: extmod/ulab/code/numpy/io/io.c
msgid "wrong dtype"
msgstr ""
#: extmod/ulab/code/numpy/transform.c
msgid "wrong index type"
msgstr ""
#: extmod/ulab/code/numpy/compare.c extmod/ulab/code/numpy/create.c
#: extmod/ulab/code/numpy/io/io.c extmod/ulab/code/numpy/transform.c
#: extmod/ulab/code/numpy/vector.c
msgid "wrong input type"
msgstr ""
#: extmod/ulab/code/numpy/transform.c
msgid "wrong length of condition array"
msgstr ""
#: extmod/ulab/code/numpy/transform.c
msgid "wrong length of index array"
msgstr ""
#: extmod/ulab/code/numpy/create.c py/objarray.c py/objstr.c
msgid "wrong number of arguments"
msgstr ""
#: py/runtime.c
msgid "wrong number of values to unpack"
msgstr ""
#: extmod/ulab/code/numpy/vector.c
msgid "wrong output type"
msgstr ""
#: shared-module/displayio/Shape.c
msgid "x value out of bounds"
msgstr ""
#: ports/espressif/common-hal/audiobusio/__init__.c
msgid "xTaskCreate failed"
msgstr ""
#: shared-bindings/displayio/Shape.c
msgid "y should be an int"
msgstr ""
#: shared-module/displayio/Shape.c
msgid "y value out of bounds"
msgstr ""
#: py/objrange.c
msgid "zero step"
msgstr ""
#: extmod/ulab/code/scipy/signal/signal.c
msgid "zi must be an ndarray"
msgstr ""
#: extmod/ulab/code/scipy/signal/signal.c
msgid "zi must be of float type"
msgstr "zi должно быть типа float"
#: extmod/ulab/code/scipy/signal/signal.c
msgid "zi must be of shape (n_section, 2)"
msgstr "zi должен иметь форму (n_section, 2)"
#~ msgid "Failed to init wifi"
#~ msgstr "Не удалось инициировать wifi"
#~ msgid "%q must be a tuple of length 2"
#~ msgstr "%q должен быть кортежем длинной 2"
#~ msgid "%q must be between %d and %d"
#~ msgstr "%q должен быть между %d и %d"
#~ msgid "%q should be an int"
#~ msgstr "%q должен быть int"
#~ msgid "(x,y) integers required"
#~ msgstr "Требуются целые числа (x,y)"
#~ msgid "Address type out of range"
#~ msgstr "Тип адреса вне диапазона"
#~ msgid "AnalogIn not supported on given pin"
#~ msgstr "AnalogIn не поддерживается на данном пине"
#~ msgid "AnalogOut functionality not supported"
#~ msgstr "Функциональность AnalogOut не поддерживается"
#~ msgid "AnalogOut is only 16 bits. Value must be less than 65536."
#~ msgstr "AnalogOut имеет только 16 бит. Значение должно быть меньше 65536."
#~ msgid "AnalogOut not supported on given pin"
#~ msgstr "AnalogOut не поддерживается на данном пине"
#, c-format
#~ msgid "Bit depth must be from 1 to 6 inclusive, not %d"
#~ msgstr "Битовая глубина должна быть от 1 до 6 включительно, а не %d"
#, c-format
#~ msgid "Buffer incorrect size. Should be %d bytes."
#~ msgstr "Неправильный размер буфера. Должен быть %d байт."
#~ msgid "Buffer must be at least length 1"
#~ msgstr "Буфер должен быть размером не менее 1"
#~ msgid "Bytes must be between 0 and 255."
#~ msgstr "Bytes должен быть в диапазоне от 0 до 255."
#~ msgid "Cannot output both channels on the same pin"
#~ msgstr "Невозможно вывести оба канала на один пин"
#~ msgid "Cannot read without MISO pin."
#~ msgstr "Считывание невозможно без пина MISO."
#~ msgid "Cannot reset into bootloader because no bootloader is present."
#~ msgstr "Невозможно перезагрузится в загрузчик так как он отсутствует."
#~ msgid "Cannot transfer without MOSI and MISO pins."
#~ msgstr "Передача данных невозможна без пинов MOSI и MISO."
#~ msgid "Cannot write without MOSI pin."
#~ msgstr "Запись невозможна без пина MOSI."
#~ msgid "Clock pin init failed."
#~ msgstr "Не удалось инициализировать пин Clock."
#~ msgid "Command must be an int between 0 and 255"
#~ msgstr "Команда должна быть целым числом (int) от 0 до 255"
#~ msgid "Could not initialize Camera"
#~ msgstr "Не удалось инициализировать камеру"
#~ msgid "Could not initialize GNSS"
#~ msgstr "Не удалось инициализировать GNSS"
#~ msgid "Could not initialize SDCard"
#~ msgstr "Не удалось инициализировать SD карту"
#~ msgid "Could not initialize UART"
#~ msgstr "Не удалось инициализировать UART"
#~ msgid "Could not re-init channel"
#~ msgstr "Не удалось повторно инициализировать канал"
#~ msgid "Could not re-init timer"
#~ msgstr "Не удалось повторно инициализировать таймер"
#~ msgid "Could not restart PWM"
#~ msgstr "Не удалось перезапустить ШИМ"
#~ msgid "Couldn't allocate first buffer"
#~ msgstr "Не удалось выделить первый буфер"
#~ msgid "Couldn't allocate input buffer"
#~ msgstr "Не удалось выделить входной буфер"
#~ msgid "Couldn't allocate second buffer"
#~ msgstr "Не удалось выделить второй буфер"
#~ msgid "DigitalInOut not supported on given pin"
#~ msgstr "DigitalInOut не поддерживается на данном пине"
#, c-format
#~ msgid "Expected tuple of length %d, got %d"
#~ msgstr "Ожидался кортеж длины %d, получен %d"
#~ msgid "Failed to allocate RX buffer"
#~ msgstr "Не удалось выделить буфер RX"
#, c-format
#~ msgid "Failed to allocate RX buffer of %d bytes"
#~ msgstr "Не удалось выделить буфер RX размером %d байт"
#, c-format
#~ msgid "Framebuffer requires %d bytes"
#~ msgstr "Фреймбуфер требует %d байт"
#~ msgid "Hostname must be between 1 and 253 characters"
#~ msgstr "Имя хоста должно содержать от 1 до 253 символов"
#~ msgid "I2C Init Error"
#~ msgstr "Ошибка инициализации I2C"
#~ msgid "Invalid %q pin selection"
#~ msgstr "Неверный выбор пина %q"
#~ msgid "Invalid AuthMode"
#~ msgstr "Недопустимый AuthMode"
#~ msgid "Invalid BMP file"
#~ msgstr "Неправилный файл BMP"
#~ msgid "Invalid DAC pin supplied"
#~ msgstr "Передан неверный пин ЦАП"
#~ msgid "Invalid MIDI file"
#~ msgstr "Неверный MIDI-файл"
#~ msgid "Invalid PWM frequency"
#~ msgstr "Недопустимая частота ШИМ"
#~ msgid "Invalid Pin"
#~ msgstr "Неверный пин"
#~ msgid "Invalid buffer size"
#~ msgstr "Неверный размер буфера"
#~ msgid "Invalid byteorder string"
#~ msgstr "Недействительная строка byteorder"
#~ msgid "Invalid capture period. Valid range: 1 - 500"
#~ msgstr "Неверный период захвата. Допустимый диапазон: 1 - 500"
#~ msgid "Invalid channel count"
#~ msgstr "Недействительное количество каналов"
#, c-format
#~ msgid "Invalid data_count %d"
#~ msgstr "Недействительный data_count %d"
#~ msgid "Invalid direction."
#~ msgstr "Неверное направление."
#~ msgid "Invalid file"
#~ msgstr "Неверный файл"
#~ msgid "Invalid number of bits"
#~ msgstr "Неверное количество бит"
#~ msgid "Invalid phase"
#~ msgstr "Неверная фаза"
#~ msgid "Invalid pin"
#~ msgstr "Недопустимый пин"
#~ msgid "Invalid pin for left channel"
#~ msgstr "Недопустимый пин для левого канала"
#~ msgid "Invalid pin for right channel"
#~ msgstr "Недопустимый пин для правого канала"
#~ msgid "Invalid polarity"
#~ msgstr "Неправильная полярность"
#~ msgid "Invalid properties"
#~ msgstr "Недопустимые свойства"
#~ msgid "Invalid run mode."
#~ msgstr "Неверный режим работы."
#~ msgid "Invalid security_mode"
#~ msgstr "Неверный security_mode"
#~ msgid "Invalid voice"
#~ msgstr "Неверный voice"
#~ msgid "Invalid voice count"
#~ msgstr "Неверный счетчик voice"
#~ msgid "Invalid wave file"
#~ msgstr "Неверный wave-файл"
#~ msgid "Invalid word/bit length"
#~ msgstr "Недопустимая длина слова/бита"
#~ msgid "Layer already in a group."
#~ msgstr "Слой уже в группе."
#~ msgid "Layer must be a Group or TileGrid subclass."
#~ msgstr "Слой должен быть группой (Group) или субклассом TileGrid."
#~ msgid "MISO pin init failed."
#~ msgstr "Не удалось инициализировать пин MISO."
#~ msgid "MOSI pin init failed."
#~ msgstr "Не удалось инициализировать пин MOSI."
#~ msgid "Messages limited to 8 bytes"
#~ msgstr "Сообщения ограничены 8 байтами"
#, c-format
#~ msgid "More than %d report ids not supported"
#~ msgstr "Не поддерживается более %d идентификаторов отчетов (report ids)"
#~ msgid "No hardware support on clk pin"
#~ msgstr "Отсутствует аппаратная поддержка пина clk"
#~ msgid "No hardware support on pin"
#~ msgstr "Отсутствует аппаратная поддержка на пине"
#~ msgid "Pin count must be at least 1"
#~ msgstr "Количество пинов должно быть не менее 1"
#~ msgid "Pin does not have ADC capabilities"
#~ msgstr "Пин не имеет возможности АЦП"
#~ msgid "Set pin count must be between 1 and 5"
#~ msgstr "Число Set пинов должно быть от 1 до 5"
#~ msgid ""
#~ "\n"
#~ "Code stopped by auto-reload.\n"
#~ msgstr ""
#~ "\n"
#~ "Программа остановлена автоматической перезагрузкой.\n"
#~ msgid "Brightness must be between 0 and 255"
#~ msgstr "Яркость должна быть в диапазоне от 0 до 255"
#, c-format
#~ msgid "No I2C device at address: %x"
#~ msgstr "Нет устройства I2C по адресу: %x"