29b5879613
Previous to this patch pyboard.py would open a new serial connection to the target for each script that was run, and for any command that was run. Apart from being inefficient, this meant that the board was soft-reset between scripts/commands, which precludes scripts from accessing variables set in a previous one. This patch changes the behaviour of pyboard.py so that the connection to the target is created only once, and it's not reset between scripts or any command that is sent with the -c option.
351 lines
12 KiB
Python
Executable File
351 lines
12 KiB
Python
Executable File
#!/usr/bin/env python
|
|
|
|
"""
|
|
pyboard interface
|
|
|
|
This module provides the Pyboard class, used to communicate with and
|
|
control the pyboard over a serial USB connection.
|
|
|
|
Example usage:
|
|
|
|
import pyboard
|
|
pyb = pyboard.Pyboard('/dev/ttyACM0')
|
|
|
|
Or:
|
|
|
|
pyb = pyboard.Pyboard('192.168.1.1')
|
|
|
|
Then:
|
|
|
|
pyb.enter_raw_repl()
|
|
pyb.exec('pyb.LED(1).on()')
|
|
pyb.exit_raw_repl()
|
|
|
|
Note: if using Python2 then pyb.exec must be written as pyb.exec_.
|
|
To run a script from the local machine on the board and print out the results:
|
|
|
|
import pyboard
|
|
pyboard.execfile('test.py', device='/dev/ttyACM0')
|
|
|
|
This script can also be run directly. To execute a local script, use:
|
|
|
|
./pyboard.py test.py
|
|
|
|
Or:
|
|
|
|
python pyboard.py test.py
|
|
|
|
"""
|
|
|
|
import sys
|
|
import time
|
|
|
|
try:
|
|
stdout = sys.stdout.buffer
|
|
except AttributeError:
|
|
# Python2 doesn't have buffer attr
|
|
stdout = sys.stdout
|
|
|
|
def stdout_write_bytes(b):
|
|
b = b.replace(b"\x04", b"")
|
|
stdout.write(b)
|
|
stdout.flush()
|
|
|
|
class PyboardError(BaseException):
|
|
pass
|
|
|
|
class TelnetToSerial:
|
|
def __init__(self, ip, user, password, read_timeout=None):
|
|
import telnetlib
|
|
self.tn = telnetlib.Telnet(ip, timeout=15)
|
|
self.read_timeout = read_timeout
|
|
if b'Login as:' in self.tn.read_until(b'Login as:', timeout=read_timeout):
|
|
self.tn.write(bytes(user, 'ascii') + b"\r\n")
|
|
|
|
if b'Password:' in self.tn.read_until(b'Password:', timeout=read_timeout):
|
|
# needed because of internal implementation details of the telnet server
|
|
time.sleep(0.2)
|
|
self.tn.write(bytes(password, 'ascii') + b"\r\n")
|
|
|
|
if b'for more information.' in self.tn.read_until(b'Type "help()" for more information.', timeout=read_timeout):
|
|
# login succesful
|
|
from collections import deque
|
|
self.fifo = deque()
|
|
return
|
|
|
|
raise PyboardError('Failed to establish a telnet connection with the board')
|
|
|
|
def __del__(self):
|
|
self.close()
|
|
|
|
def close(self):
|
|
try:
|
|
self.tn.close()
|
|
except:
|
|
# the telnet object might not exist yet, so ignore this one
|
|
pass
|
|
|
|
def read(self, size=1):
|
|
while len(self.fifo) < size:
|
|
timeout_count = 0
|
|
data = self.tn.read_eager()
|
|
if len(data):
|
|
self.fifo.extend(data)
|
|
timeout_count = 0
|
|
else:
|
|
time.sleep(0.25)
|
|
if self.read_timeout is not None and timeout_count > 4 * self.read_timeout:
|
|
break
|
|
timeout_count += 1
|
|
|
|
data = b''
|
|
while len(data) < size and len(self.fifo) > 0:
|
|
data += bytes([self.fifo.popleft()])
|
|
return data
|
|
|
|
def write(self, data):
|
|
self.tn.write(data)
|
|
return len(data)
|
|
|
|
def inWaiting(self):
|
|
n_waiting = len(self.fifo)
|
|
if not n_waiting:
|
|
data = self.tn.read_eager()
|
|
self.fifo.extend(data)
|
|
return len(data)
|
|
else:
|
|
return n_waiting
|
|
|
|
class Pyboard:
|
|
def __init__(self, device, baudrate=115200, user='micro', password='python', wait=0):
|
|
if device and device[0].isdigit() and device[-1].isdigit() and device.count('.') == 3:
|
|
# device looks like an IP address
|
|
self.serial = TelnetToSerial(device, user, password, read_timeout=10)
|
|
else:
|
|
import serial
|
|
delayed = False
|
|
for attempt in range(wait + 1):
|
|
try:
|
|
self.serial = serial.Serial(device, baudrate=baudrate, interCharTimeout=1)
|
|
break
|
|
except (OSError, IOError): # Py2 and Py3 have different errors
|
|
if wait == 0:
|
|
continue
|
|
if attempt == 0:
|
|
sys.stdout.write('Waiting {} seconds for pyboard '.format(wait))
|
|
delayed = True
|
|
time.sleep(1)
|
|
sys.stdout.write('.')
|
|
sys.stdout.flush()
|
|
else:
|
|
if delayed:
|
|
print('')
|
|
raise PyboardError('failed to access ' + device)
|
|
if delayed:
|
|
print('')
|
|
|
|
def close(self):
|
|
self.serial.close()
|
|
|
|
def read_until(self, min_num_bytes, ending, timeout=10, data_consumer=None):
|
|
data = self.serial.read(min_num_bytes)
|
|
if data_consumer:
|
|
data_consumer(data)
|
|
timeout_count = 0
|
|
while True:
|
|
if data.endswith(ending):
|
|
break
|
|
elif self.serial.inWaiting() > 0:
|
|
new_data = self.serial.read(1)
|
|
data = data + new_data
|
|
if data_consumer:
|
|
data_consumer(new_data)
|
|
timeout_count = 0
|
|
else:
|
|
timeout_count += 1
|
|
if timeout is not None and timeout_count >= 100 * timeout:
|
|
break
|
|
time.sleep(0.01)
|
|
return data
|
|
|
|
def enter_raw_repl(self):
|
|
self.serial.write(b'\r\x03\x03') # ctrl-C twice: interrupt any running program
|
|
|
|
# flush input (without relying on serial.flushInput())
|
|
n = self.serial.inWaiting()
|
|
while n > 0:
|
|
self.serial.read(n)
|
|
n = self.serial.inWaiting()
|
|
|
|
self.serial.write(b'\r\x01') # ctrl-A: enter raw REPL
|
|
data = self.read_until(1, b'raw REPL; CTRL-B to exit\r\n>')
|
|
if not data.endswith(b'raw REPL; CTRL-B to exit\r\n>'):
|
|
print(data)
|
|
raise PyboardError('could not enter raw repl')
|
|
|
|
self.serial.write(b'\x04') # ctrl-D: soft reset
|
|
data = self.read_until(1, b'soft reboot\r\n')
|
|
if not data.endswith(b'soft reboot\r\n'):
|
|
print(data)
|
|
raise PyboardError('could not enter raw repl')
|
|
# By splitting this into 2 reads, it allows boot.py to print stuff,
|
|
# which will show up after the soft reboot and before the raw REPL.
|
|
data = self.read_until(1, b'raw REPL; CTRL-B to exit\r\n')
|
|
if not data.endswith(b'raw REPL; CTRL-B to exit\r\n'):
|
|
print(data)
|
|
raise PyboardError('could not enter raw repl')
|
|
|
|
def exit_raw_repl(self):
|
|
self.serial.write(b'\r\x02') # ctrl-B: enter friendly REPL
|
|
|
|
def follow(self, timeout, data_consumer=None):
|
|
# wait for normal output
|
|
data = self.read_until(1, b'\x04', timeout=timeout, data_consumer=data_consumer)
|
|
if not data.endswith(b'\x04'):
|
|
raise PyboardError('timeout waiting for first EOF reception')
|
|
data = data[:-1]
|
|
|
|
# wait for error output
|
|
data_err = self.read_until(1, b'\x04', timeout=timeout)
|
|
if not data_err.endswith(b'\x04'):
|
|
raise PyboardError('timeout waiting for second EOF reception')
|
|
data_err = data_err[:-1]
|
|
|
|
# return normal and error output
|
|
return data, data_err
|
|
|
|
def exec_raw_no_follow(self, command):
|
|
if isinstance(command, bytes):
|
|
command_bytes = command
|
|
else:
|
|
command_bytes = bytes(command, encoding='utf8')
|
|
|
|
# check we have a prompt
|
|
data = self.read_until(1, b'>')
|
|
if not data.endswith(b'>'):
|
|
raise PyboardError('could not enter raw repl')
|
|
|
|
# write command
|
|
for i in range(0, len(command_bytes), 256):
|
|
self.serial.write(command_bytes[i:min(i + 256, len(command_bytes))])
|
|
time.sleep(0.01)
|
|
self.serial.write(b'\x04')
|
|
|
|
# check if we could exec command
|
|
data = self.serial.read(2)
|
|
if data != b'OK':
|
|
raise PyboardError('could not exec command')
|
|
|
|
def exec_raw(self, command, timeout=10, data_consumer=None):
|
|
self.exec_raw_no_follow(command);
|
|
return self.follow(timeout, data_consumer)
|
|
|
|
def eval(self, expression):
|
|
ret = self.exec_('print({})'.format(expression))
|
|
ret = ret.strip()
|
|
return ret
|
|
|
|
def exec_(self, command):
|
|
ret, ret_err = self.exec_raw(command)
|
|
if ret_err:
|
|
raise PyboardError('exception', ret, ret_err)
|
|
return ret
|
|
|
|
def execfile(self, filename):
|
|
with open(filename, 'rb') as f:
|
|
pyfile = f.read()
|
|
return self.exec_(pyfile)
|
|
|
|
def get_time(self):
|
|
t = str(self.eval('pyb.RTC().datetime()'), encoding='utf8')[1:-1].split(', ')
|
|
return int(t[4]) * 3600 + int(t[5]) * 60 + int(t[6])
|
|
|
|
# in Python2 exec is a keyword so one must use "exec_"
|
|
# but for Python3 we want to provide the nicer version "exec"
|
|
setattr(Pyboard, "exec", Pyboard.exec_)
|
|
|
|
def execfile(filename, device='/dev/ttyACM0', baudrate=115200, user='micro', password='python'):
|
|
pyb = Pyboard(device, baudrate, user, password)
|
|
pyb.enter_raw_repl()
|
|
output = pyb.execfile(filename)
|
|
stdout_write_bytes(output)
|
|
pyb.exit_raw_repl()
|
|
pyb.close()
|
|
|
|
def main():
|
|
import argparse
|
|
cmd_parser = argparse.ArgumentParser(description='Run scripts on the pyboard.')
|
|
cmd_parser.add_argument('--device', default='/dev/ttyACM0', help='the serial device or the IP address of the pyboard')
|
|
cmd_parser.add_argument('-b', '--baudrate', default=115200, help='the baud rate of the serial device')
|
|
cmd_parser.add_argument('-u', '--user', default='micro', help='the telnet login username')
|
|
cmd_parser.add_argument('-p', '--password', default='python', help='the telnet login password')
|
|
cmd_parser.add_argument('-c', '--command', help='program passed in as string')
|
|
cmd_parser.add_argument('-w', '--wait', default=0, type=int, help='seconds to wait for USB connected board to become available')
|
|
cmd_parser.add_argument('--follow', action='store_true', help='follow the output after running the scripts [default if no scripts given]')
|
|
cmd_parser.add_argument('files', nargs='*', help='input files')
|
|
args = cmd_parser.parse_args()
|
|
|
|
# open the connection to the pyboard
|
|
try:
|
|
pyb = Pyboard(args.device, args.baudrate, args.user, args.password, args.wait)
|
|
except PyboardError as er:
|
|
print(er)
|
|
sys.exit(1)
|
|
|
|
# run any command or file(s)
|
|
if args.command is not None or len(args.files):
|
|
# we must enter raw-REPL mode to execute commands
|
|
# this will do a soft-reset of the board
|
|
try:
|
|
pyb.enter_raw_repl()
|
|
except PyboardError as er:
|
|
print(er)
|
|
sys.exit(1)
|
|
|
|
def execbuffer(buf):
|
|
try:
|
|
ret, ret_err = pyb.exec_raw(buf, timeout=None, data_consumer=stdout_write_bytes)
|
|
except PyboardError as er:
|
|
print(er)
|
|
sys.exit(1)
|
|
except KeyboardInterrupt:
|
|
sys.exit(1)
|
|
if ret_err:
|
|
pyb.exit_raw_repl()
|
|
pyb.close()
|
|
stdout_write_bytes(ret_err)
|
|
sys.exit(1)
|
|
|
|
# run the command, if given
|
|
if args.command is not None:
|
|
execbuffer(args.command.encode('utf-8'))
|
|
|
|
# run any files
|
|
for filename in args.files:
|
|
with open(filename, 'rb') as f:
|
|
pyfile = f.read()
|
|
execbuffer(pyfile)
|
|
|
|
# exiting raw-REPL just drops to friendly-REPL mode
|
|
pyb.exit_raw_repl()
|
|
|
|
# if asked explicitly, or no files given, then follow the output
|
|
if args.follow or (args.command is None and len(args.files) == 0):
|
|
try:
|
|
ret, ret_err = pyb.follow(timeout=None, data_consumer=stdout_write_bytes)
|
|
except PyboardError as er:
|
|
print(er)
|
|
sys.exit(1)
|
|
except KeyboardInterrupt:
|
|
sys.exit(1)
|
|
if ret_err:
|
|
pyb.close()
|
|
stdout_write_bytes(ret_err)
|
|
sys.exit(1)
|
|
|
|
# close the connection to the pyboard
|
|
pyb.close()
|
|
|
|
if __name__ == "__main__":
|
|
main()
|