efa97beb99
The firmware for Teensy 4.0, Teensy 4.1 and MIMXRT1020_EVK are created. Users of other MIMXRT10xx_EVK boards should be able to build the firmware themselves, they might need specific DEBUG settings. The Makefile had to be changed in order to build the .bin file as well.
335 lines
8.2 KiB
Makefile
335 lines
8.2 KiB
Makefile
BOARD ?= TEENSY40
|
|
BOARD_DIR ?= boards/$(BOARD)
|
|
BUILD ?= build-$(BOARD)
|
|
|
|
PORT ?= /dev/ttyACM0
|
|
|
|
CROSS_COMPILE ?= arm-none-eabi-
|
|
|
|
ifeq ($(wildcard $(BOARD_DIR)/.),)
|
|
$(error Invalid BOARD specified: $(BOARD_DIR))
|
|
endif
|
|
|
|
include ../../py/mkenv.mk
|
|
include $(BOARD_DIR)/mpconfigboard.mk
|
|
|
|
# Qstr definitions (must come before including py.mk)
|
|
QSTR_DEFS = qstrdefsport.h
|
|
QSTR_GLOBAL_DEPENDENCIES = $(BOARD_DIR)/mpconfigboard.h
|
|
|
|
# MicroPython feature configurations
|
|
FROZEN_MANIFEST ?= boards/manifest.py
|
|
MICROPY_VFS_LFS2 ?= 1
|
|
|
|
# Include py core make definitions
|
|
include $(TOP)/py/py.mk
|
|
|
|
GIT_SUBMODULES = lib/tinyusb lib/nxp_driver
|
|
|
|
MCU_DIR = lib/nxp_driver/sdk/devices/$(MCU_SERIES)
|
|
LD_FILES = boards/$(BOARD)/$(BOARD).ld boards/$(MCU_SERIES).ld boards/common.ld
|
|
|
|
MAKE_PINS = boards/make-pins.py
|
|
BOARD_PINS = $(BOARD_DIR)/pins.csv
|
|
AF_FILE = boards/$(MCU_SERIES)_af.csv
|
|
PREFIX_FILE = boards/mimxrt_prefix.c
|
|
GEN_PINS_SRC = $(BUILD)/pins_gen.c
|
|
GEN_PINS_HDR = $(HEADER_BUILD)/pins.h
|
|
GEN_PINS_QSTR = $(BUILD)/pins_qstr.h
|
|
GEN_PINS_AF_CONST = $(HEADER_BUILD)/pins_af_const.h
|
|
GEN_PINS_AF_PY = $(BUILD)/pins_af.py
|
|
|
|
# mcu driver cause following warnings
|
|
#CFLAGS += -Wno-error=float-equal -Wno-error=nested-externs
|
|
CFLAGS += -Wno-error=unused-parameter
|
|
|
|
INC += -I.
|
|
INC += -I$(TOP)
|
|
INC += -I$(BUILD)
|
|
INC += -I$(BOARD_DIR)
|
|
INC += -I$(TOP)/lib/cmsis/inc
|
|
INC += -I$(TOP)/$(MCU_DIR)
|
|
INC += -I$(TOP)/$(MCU_DIR)/drivers
|
|
INC += -I$(TOP)/$(MCU_DIR)/project_template
|
|
INC += -I$(TOP)/lib/tinyusb/src
|
|
INC += -I$(TOP)/lib/tinyusb/hw
|
|
INC += -I$(TOP)/lib/tinyusb/hw/bsp/teensy_40
|
|
|
|
CFLAGS_MCU = -mtune=cortex-m7 -mcpu=cortex-m7 -mfloat-abi=hard -mfpu=fpv5-d16
|
|
CFLAGS += $(INC) -Wall -Werror -Wdouble-promotion -Wfloat-conversion -std=c99 -nostdlib -mthumb $(CFLAGS_MCU)
|
|
CFLAGS += -DCPU_$(MCU_SERIES) -DCPU_$(MCU_VARIANT)
|
|
CFLAGS += -DXIP_EXTERNAL_FLASH=1 \
|
|
-DXIP_BOOT_HEADER_ENABLE=1 \
|
|
-DCFG_TUSB_MCU=OPT_MCU_MIMXRT10XX \
|
|
-D__STARTUP_CLEAR_BSS \
|
|
-D__STARTUP_INITIALIZE_RAMFUNCTION \
|
|
-D__START=main \
|
|
-DCPU_HEADER_H='<$(MCU_SERIES).h>'
|
|
CFLAGS += $(CFLAGS_MOD) $(CFLAGS_EXTRA)
|
|
|
|
# Configure floating point support
|
|
ifeq ($(MICROPY_FLOAT_IMPL),double)
|
|
CFLAGS += -DMICROPY_FLOAT_IMPL=MICROPY_FLOAT_IMPL_DOUBLE
|
|
else
|
|
ifeq ($(MICROPY_FLOAT_IMPL),none)
|
|
CFLAGS += -DMICROPY_FLOAT_IMPL=MICROPY_FLOAT_IMPL_NONE
|
|
else
|
|
CFLAGS += -DMICROPY_FLOAT_IMPL=MICROPY_FLOAT_IMPL_FLOAT
|
|
CFLAGS += -fsingle-precision-constant
|
|
endif
|
|
endif
|
|
|
|
SUPPORTS_HARDWARE_FP_SINGLE = 0
|
|
SUPPORTS_HARDWARE_FP_DOUBLE = 0
|
|
|
|
LDFLAGS = $(addprefix -T,$(LD_FILES)) -Map=$@.map --cref --print-memory-usage
|
|
LIBS = $(shell $(CC) $(CFLAGS) -print-libgcc-file-name)
|
|
|
|
# Tune for Debugging or Optimization
|
|
ifeq ($(DEBUG),1)
|
|
CFLAGS += -O0 -ggdb
|
|
LDFLAGS += --gc-sections
|
|
CFLAGS += -fdata-sections -ffunction-sections
|
|
else
|
|
CFLAGS += -Os -DNDEBUG
|
|
LDFLAGS += --gc-sections
|
|
CFLAGS += -fdata-sections -ffunction-sections
|
|
endif
|
|
|
|
# TinyUSB Stack source
|
|
SRC_TINYUSB_C += \
|
|
lib/tinyusb/src/tusb.c \
|
|
lib/tinyusb/src/common/tusb_fifo.c \
|
|
lib/tinyusb/src/device/usbd.c \
|
|
lib/tinyusb/src/device/usbd_control.c \
|
|
lib/tinyusb/src/class/msc/msc_device.c \
|
|
lib/tinyusb/src/class/cdc/cdc_device.c \
|
|
lib/tinyusb/src/class/dfu/dfu_rt_device.c \
|
|
lib/tinyusb/src/class/hid/hid_device.c \
|
|
lib/tinyusb/src/class/midi/midi_device.c \
|
|
lib/tinyusb/src/class/usbtmc/usbtmc_device.c \
|
|
lib/tinyusb/src/class/vendor/vendor_device.c \
|
|
lib/tinyusb/src/portable/nxp/transdimension/dcd_transdimension.c
|
|
|
|
SRC_HAL_IMX_C += \
|
|
$(MCU_DIR)/system_$(MCU_SERIES).c \
|
|
$(MCU_DIR)/xip/fsl_flexspi_nor_boot.c \
|
|
$(MCU_DIR)/project_template/clock_config.c \
|
|
$(MCU_DIR)/drivers/fsl_adc.c \
|
|
$(MCU_DIR)/drivers/fsl_cache.c \
|
|
$(MCU_DIR)/drivers/fsl_clock.c \
|
|
$(MCU_DIR)/drivers/fsl_dmamux.c \
|
|
$(MCU_DIR)/drivers/fsl_edma.c \
|
|
$(MCU_DIR)/drivers/fsl_gpio.c \
|
|
$(MCU_DIR)/drivers/fsl_gpt.c \
|
|
$(MCU_DIR)/drivers/fsl_common.c \
|
|
$(MCU_DIR)/drivers/fsl_lpspi.c \
|
|
$(MCU_DIR)/drivers/fsl_lpspi_edma.c \
|
|
$(MCU_DIR)/drivers/fsl_lpuart.c \
|
|
$(MCU_DIR)/drivers/fsl_flexram.c \
|
|
$(MCU_DIR)/drivers/fsl_flexspi.c \
|
|
$(MCU_DIR)/drivers/fsl_pit.c \
|
|
$(MCU_DIR)/drivers/fsl_snvs_lp.c \
|
|
$(MCU_DIR)/drivers/fsl_trng.c \
|
|
|
|
SRC_C = \
|
|
main.c \
|
|
led.c \
|
|
pin.c \
|
|
ticks.c \
|
|
tusb_port.c \
|
|
board_init.c \
|
|
dma_channel.c \
|
|
$(BOARD_DIR)/flash_config.c \
|
|
machine_adc.c \
|
|
machine_led.c \
|
|
machine_pin.c \
|
|
machine_rtc.c \
|
|
machine_spi.c \
|
|
machine_timer.c \
|
|
machine_uart.c \
|
|
mimxrt_flash.c \
|
|
modutime.c \
|
|
modmachine.c \
|
|
modmimxrt.c \
|
|
moduos.c \
|
|
mphalport.c \
|
|
hal/flexspi_nor_flash.c \
|
|
lib/mp-readline/readline.c \
|
|
lib/libc/string0.c \
|
|
lib/timeutils/timeutils.c \
|
|
lib/utils/gchelper_native.c \
|
|
lib/utils/mpirq.c \
|
|
lib/utils/printf.c \
|
|
lib/utils/pyexec.c \
|
|
lib/utils/stdout_helpers.c \
|
|
lib/utils/sys_stdio_mphal.c \
|
|
drivers/bus/softspi.c \
|
|
extmod/modonewire.c \
|
|
$(SRC_TINYUSB_C) \
|
|
$(SRC_HAL_IMX_C) \
|
|
|
|
ifeq ($(MICROPY_FLOAT_IMPL),double)
|
|
LIBM_SRC_C += $(addprefix lib/libm_dbl/,\
|
|
__cos.c \
|
|
__expo2.c \
|
|
__fpclassify.c \
|
|
__rem_pio2.c \
|
|
__rem_pio2_large.c \
|
|
__signbit.c \
|
|
__sin.c \
|
|
__tan.c \
|
|
acos.c \
|
|
acosh.c \
|
|
asin.c \
|
|
asinh.c \
|
|
atan.c \
|
|
atan2.c \
|
|
atanh.c \
|
|
ceil.c \
|
|
cos.c \
|
|
cosh.c \
|
|
copysign.c \
|
|
erf.c \
|
|
exp.c \
|
|
expm1.c \
|
|
floor.c \
|
|
fmod.c \
|
|
frexp.c \
|
|
ldexp.c \
|
|
lgamma.c \
|
|
log.c \
|
|
log10.c \
|
|
log1p.c \
|
|
modf.c \
|
|
nearbyint.c \
|
|
pow.c \
|
|
rint.c \
|
|
round.c \
|
|
scalbn.c \
|
|
sin.c \
|
|
sinh.c \
|
|
tan.c \
|
|
tanh.c \
|
|
tgamma.c \
|
|
trunc.c \
|
|
)
|
|
ifeq ($(SUPPORTS_HARDWARE_FP_DOUBLE),1)
|
|
LIBM_SRC_C += lib/libm_dbl/thumb_vfp_sqrt.c
|
|
else
|
|
LIBM_SRC_C += lib/libm_dbl/sqrt.c
|
|
endif
|
|
else
|
|
LIBM_SRC_C += $(addprefix lib/libm/,\
|
|
math.c \
|
|
acoshf.c \
|
|
asinfacosf.c \
|
|
asinhf.c \
|
|
atan2f.c \
|
|
atanf.c \
|
|
atanhf.c \
|
|
ef_rem_pio2.c \
|
|
erf_lgamma.c \
|
|
fmodf.c \
|
|
kf_cos.c \
|
|
kf_rem_pio2.c \
|
|
kf_sin.c \
|
|
kf_tan.c \
|
|
log1pf.c \
|
|
nearbyintf.c \
|
|
roundf.c \
|
|
sf_cos.c \
|
|
sf_erf.c \
|
|
sf_frexp.c \
|
|
sf_ldexp.c \
|
|
sf_modf.c \
|
|
sf_sin.c \
|
|
sf_tan.c \
|
|
wf_lgamma.c \
|
|
wf_tgamma.c \
|
|
)
|
|
ifeq ($(SUPPORTS_HARDWARE_FP_SINGLE),1)
|
|
LIBM_SRC_C += lib/libm/thumb_vfp_sqrtf.c
|
|
else
|
|
LIBM_SRC_C += lib/libm/ef_sqrt.c
|
|
endif
|
|
endif
|
|
|
|
LIBM_O = $(addprefix $(BUILD)/, $(LIBM_SRC_C:.c=.o))
|
|
|
|
# Too many warnings in libm_dbl, disable for now.
|
|
ifeq ($(MICROPY_FLOAT_IMPL),double)
|
|
$(LIBM_O): CFLAGS := $(filter-out -Wdouble-promotion -Wfloat-conversion, $(CFLAGS))
|
|
endif
|
|
|
|
SRC_SS = $(MCU_DIR)/gcc/startup_$(MCU_SERIES).S
|
|
|
|
SRC_S = lib/utils/gchelper_m3.s \
|
|
|
|
# List of sources for qstr extraction
|
|
SRC_QSTR += \
|
|
machine_adc.c \
|
|
machine_led.c \
|
|
machine_pin.c \
|
|
machine_rtc.c \
|
|
machine_spi.c \
|
|
machine_timer.c \
|
|
machine_uart.c \
|
|
mimxrt_flash.c \
|
|
modutime.c \
|
|
modmachine.c \
|
|
modmimxrt.c \
|
|
moduos.c \
|
|
pin.c \
|
|
lib/utils/mpirq.c \
|
|
lib/utils/sys_stdio_mphal.c \
|
|
extmod/modonewire.c \
|
|
$(GEN_PINS_SRC) \
|
|
|
|
OBJ += $(PY_O)
|
|
OBJ += $(LIBM_O)
|
|
OBJ += $(addprefix $(BUILD)/, $(SRC_C:.c=.o))
|
|
OBJ += $(addprefix $(BUILD)/, $(SRC_S:.s=.o))
|
|
OBJ += $(addprefix $(BUILD)/, $(SRC_SS:.S=.o))
|
|
OBJ += $(addprefix $(BUILD)/, $(SRC_MOD:.c=.o))
|
|
OBJ += $(BUILD)/pins_gen.o
|
|
|
|
# Workaround for bug in older gcc, warning on "static usbd_device_t _usbd_dev = { 0 };"
|
|
$(BUILD)/lib/tinyusb/src/device/usbd.o: CFLAGS += -Wno-missing-braces
|
|
|
|
all: $(BUILD)/firmware.hex $(BUILD)/firmware.bin
|
|
|
|
$(BUILD)/firmware.elf: $(OBJ)
|
|
$(ECHO) "LINK $@"
|
|
$(Q)$(LD) $(LDFLAGS) -o $@ $^ $(LIBS)
|
|
$(Q)$(SIZE) $@
|
|
|
|
$(BUILD)/firmware.bin: $(BUILD)/firmware.elf
|
|
$(Q)$(OBJCOPY) -O binary $^ $@
|
|
|
|
$(BUILD)/firmware.hex: $(BUILD)/firmware.elf
|
|
$(Q)$(OBJCOPY) -O ihex -R .eeprom $< $@
|
|
|
|
# Making OBJ use an order-only depenedency on the generated pins.h file
|
|
# has the side effect of making the pins.h file before we actually compile
|
|
# any of the objects. The normal dependency generation will deal with the
|
|
# case when pins.h is modified. But when it doesn't exist, we don't know
|
|
# which source files might need it.
|
|
$(OBJ): | $(GEN_PINS_HDR)
|
|
|
|
# With conditional pins, we may need to regenerate qstrdefs.h when config
|
|
# options change.
|
|
$(HEADER_BUILD)/qstrdefs.generated.h: $(BOARD_DIR)/mpconfigboard.h
|
|
|
|
# Use a pattern rule here so that make will only call make-pins.py once to make
|
|
# both pins_gen.c and pins.h
|
|
$(BUILD)/%_gen.c $(HEADER_BUILD)/%.h: $(BOARD_PINS) $(MAKE_PINS) $(AF_FILE) $(PREFIX_FILE) | $(HEADER_BUILD)
|
|
$(ECHO) "Create $@"
|
|
$(Q)$(PYTHON) $(MAKE_PINS) --board $(BOARD_PINS) --af $(AF_FILE)\
|
|
--prefix $(PREFIX_FILE) --hdr $(GEN_PINS_HDR) > $(GEN_PINS_SRC)
|
|
|
|
$(BUILD)/pins_gen.o: $(BUILD)/pins_gen.c
|
|
$(call compile_c)
|
|
|
|
include $(TOP)/py/mkrules.mk
|