ef4a74e201
Currently boots on board and can connect to REPL, but does not appear as mountable drive in OS. Starting REPL gives the following error message: ``` You are running in safe mode which means something unanticipated happened. Looks like our core CircuitPython code crashed hard. Whoops! Please file an issue at https://github.com/adafruit/circuitpython/issues with the contents of your CIRCUITPY drive and this message: Crash into the HardFault_Handler. ```
38 lines
1.1 KiB
C
38 lines
1.1 KiB
C
#define MICROPY_HW_BOARD_NAME "Adafruit Pybadge"
|
|
#define MICROPY_HW_MCU_NAME "samd51j19"
|
|
|
|
#define CIRCUITPY_MCU_FAMILY samd51
|
|
|
|
// This is for Rev B
|
|
#define MICROPY_HW_LED_STATUS (&pin_PA22)
|
|
|
|
// These are pins not to reset.
|
|
// QSPI Data pins
|
|
#define MICROPY_PORT_A (PORT_PA08 | PORT_PA09 | PORT_PA10 | PORT_PA11)
|
|
// DotStar pins, QSPI CS, and QSPI SCK
|
|
#define MICROPY_PORT_B (PORT_PB10 | PORT_PB11)
|
|
#define MICROPY_PORT_C (0)
|
|
#define MICROPY_PORT_D (0)
|
|
|
|
#define AUTORESET_DELAY_MS 500
|
|
|
|
// If you change this, then make sure to update the linker scripts as well to
|
|
// make sure you don't overwrite code
|
|
#define CIRCUITPY_INTERNAL_NVM_SIZE 8192
|
|
|
|
#define BOARD_FLASH_SIZE (FLASH_SIZE - 0x4000 - CIRCUITPY_INTERNAL_NVM_SIZE)
|
|
|
|
#define DEFAULT_I2C_BUS_SCL (&pin_PA13)
|
|
#define DEFAULT_I2C_BUS_SDA (&pin_PA12)
|
|
|
|
#define DEFAULT_SPI_BUS_SCK (&pin_PA17)
|
|
#define DEFAULT_SPI_BUS_MOSI (&pin_PB23)
|
|
#define DEFAULT_SPI_BUS_MISO (&pin_PB22)
|
|
|
|
#define DEFAULT_UART_BUS_RX (&pin_PB17)
|
|
#define DEFAULT_UART_BUS_TX (&pin_PB16)
|
|
|
|
// USB is always used internally so skip the pin objects for it.
|
|
#define IGNORE_PIN_PA24 1
|
|
#define IGNORE_PIN_PA25 1
|