circuitpython/ports/litex/supervisor/port.c

140 lines
3.6 KiB
C

/*
* This file is part of the MicroPython project, http://micropython.org/
*
* The MIT License (MIT)
*
* Copyright (c) 2017 Scott Shawcroft for Adafruit Industries
* Copyright (c) 2019 Lucian Copeland for Adafruit Industries
*
* Permission is hereby granted, free of charge, to any person obtaining a copy
* of this software and associated documentation files (the "Software"), to deal
* in the Software without restriction, including without limitation the rights
* to use, copy, modify, merge, publish, distribute, sublicense, and/or sell
* copies of the Software, and to permit persons to whom the Software is
* furnished to do so, subject to the following conditions:
*
* The above copyright notice and this permission notice shall be included in
* all copies or substantial portions of the Software.
*
* THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
* IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
* FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE
* AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER
* LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM,
* OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN
* THE SOFTWARE.
*/
#include <stdint.h>
#include "supervisor/port.h"
#include "supervisor/shared/tick.h"
#include "boards/board.h"
#include "irq.h"
#include "csr.h"
// Global millisecond tick count. 1024 per second because most RTCs are clocked with 32.768khz
// crystals.
volatile uint64_t raw_ticks = 0;
volatile int subsecond = 0;
__attribute__((section(".ramtext")))
void SysTick_Handler(void) {
timer0_ev_pending_write(1);
raw_ticks += 1;
subsecond += 1;
// We track subsecond ticks so that we can increment raw_ticks one extra every 40 ms. We do this
// every 40 except 0 to make it 24 increments and not 25.
if (subsecond == 1000) {
subsecond = 0;
} else if (subsecond % 40 == 0) {
raw_ticks += 1;
}
supervisor_tick();
}
static void tick_init(void) {
int t;
timer0_en_write(0);
t = CONFIG_CLOCK_FREQUENCY / 1000; // 1000 kHz tick
timer0_reload_write(t);
timer0_load_write(t);
timer0_en_write(1);
timer0_ev_enable_write(1);
timer0_ev_pending_write(1);
irq_setmask(irq_getmask() | (1 << TIMER0_INTERRUPT));
}
safe_mode_t port_init(void) {
irq_setmask(0);
irq_setie(1);
tick_init();
return NO_SAFE_MODE;
}
extern uint32_t _ebss;
extern uint32_t _heap_start;
extern uint32_t _estack;
void reset_port(void) {
// reset_all_pins();
// i2c_reset();
// spi_reset();
// uart_reset();
// pwmout_reset();
}
void reset_to_bootloader(void) {
reboot_ctrl_write(0xac);
}
void reset_cpu(void) {
}
supervisor_allocation* port_fixed_stack(void) {
return NULL;
}
uint32_t *port_heap_get_bottom(void) {
return port_stack_get_limit();
}
uint32_t *port_heap_get_top(void) {
return port_stack_get_top();
}
uint32_t *port_stack_get_limit(void) {
return &_ebss;
}
uint32_t *port_stack_get_top(void) {
return &_estack;
}
// Place the word to save just after our BSS section that gets blanked.
void port_set_saved_word(uint32_t value) {
_ebss = value;
}
uint32_t port_get_saved_word(void) {
return _ebss;
}
uint64_t port_get_raw_ticks(uint8_t* subticks) {
return raw_ticks;
}
// Enable 1/1024 second tick.
void port_enable_tick(void) {
}
// Disable 1/1024 second tick.
void port_disable_tick(void) {
}
void port_interrupt_after_ticks(uint32_t ticks) {
}
// TODO: Add sleep support if the SoC supports sleep.
void port_sleep_until_interrupt(void) {
}