46 lines
1.4 KiB
C
46 lines
1.4 KiB
C
#define NETDUINO_PLUS_2
|
|
|
|
#define MICROPY_HW_BOARD_NAME "NetduinoPlus2"
|
|
|
|
#define MICROPY_HW_HAS_SWITCH (1)
|
|
|
|
// On the netuino, the sdcard appears to be wired up as a 1-bit
|
|
// SPI, so the driver needs to be converted to support that before
|
|
// we can turn this on.
|
|
#define MICROPY_HW_HAS_SDCARD (0)
|
|
#define MICROPY_HW_HAS_MMA7660 (0)
|
|
#define MICROPY_HW_HAS_LIS3DSH (0)
|
|
#define MICROPY_HW_HAS_LCD (0)
|
|
#define MICROPY_HW_HAS_WLAN (0)
|
|
#define MICROPY_HW_ENABLE_RNG (1)
|
|
#define MICROPY_HW_ENABLE_RTC (0)
|
|
#define MICROPY_HW_ENABLE_TIMER (1)
|
|
#define MICROPY_HW_ENABLE_SERVO (1)
|
|
#define MICROPY_HW_ENABLE_AUDIO (0)
|
|
|
|
// USRSW is pulled low. Pressing the button makes the input go high.
|
|
#define USRSW_PIN (pin_B11)
|
|
#define USRSW_PUPD (GPIO_PuPd_NOPULL)
|
|
#define USRSW_EXTI_EDGE (EXTI_Trigger_Rising)
|
|
#define USRSW_PRESSED (1)
|
|
|
|
/* LED */
|
|
#define PYB_LED1_PORT (GPIOA) // Blue LED
|
|
#define PYB_LED1_PIN (GPIO_Pin_10)
|
|
|
|
#define PYB_LED2_PORT (GPIOC) // White LED (aka Power)
|
|
#define PYB_LED2_PIN (GPIO_Pin_13)
|
|
|
|
#define PYB_LED3_PORT (GPIOA) // Same as Led(1)
|
|
#define PYB_LED3_PIN (GPIO_Pin_10)
|
|
|
|
#define PYB_LED4_PORT (GPIOC) // Same as Led(2)
|
|
#define PYB_LED4_PIN (GPIO_Pin_13)
|
|
|
|
#define PYB_OTYPE (GPIO_OType_PP)
|
|
|
|
#define PYB_LED_ON(port, pin) (port->BSRRL = pin)
|
|
#define PYB_LED_OFF(port, pin) (port->BSRRH = pin)
|
|
|
|
#define HSE_VALUE (25000000)
|