circuitpython/ports/mimxrt10xx/common-hal/digitalio/DigitalInOut.c

/*
 * This file is part of the MicroPython project, http://micropython.org/
 *
 * The MIT License (MIT)
 *
 * Copyright (c) 2017 Scott Shawcroft for Adafruit Industries
 * Copyright (c) 2019 Artur Pacholec
 *
 * Permission is hereby granted, free of charge, to any person obtaining a copy
 * of this software and associated documentation files (the "Software"), to deal
 * in the Software without restriction, including without limitation the rights
 * to use, copy, modify, merge, publish, distribute, sublicense, and/or sell
 * copies of the Software, and to permit persons to whom the Software is
 * furnished to do so, subject to the following conditions:
 *
 * The above copyright notice and this permission notice shall be included in
 * all copies or substantial portions of the Software.
 *
 * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
 * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
 * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE
 * AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER
 * LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM,
 * OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN
 * THE SOFTWARE.
 */

#include <stdint.h>
#include <string.h>
#include <stdio.h>

#include "py/runtime.h"
#include "py/mphal.h"

#include "fsl_gpio.h"

#include "shared-bindings/microcontroller/Pin.h"
#include "shared-bindings/digitalio/DigitalInOut.h"
#include "supervisor/shared/translate.h"

#define IOMUXC_SW_MUX_CTL_PAD_MUX_MODE_ALT5 5U

void pin_config(const mcu_pin_obj_t *pin, bool open_drain, digitalio_pull_t pull)
{
    IOMUXC_SetPinConfig(0, 0, 0, 0, pin->cfg_reg,
        IOMUXC_SW_PAD_CTL_PAD_HYS(1)
            | IOMUXC_SW_PAD_CTL_PAD_PUS((pull == PULL_UP) ? 2 : 0)
            | IOMUXC_SW_PAD_CTL_PAD_PUE(pull != PULL_NONE)
            | IOMUXC_SW_PAD_CTL_PAD_PKE(1)
            | IOMUXC_SW_PAD_CTL_PAD_ODE(open_drain)
            | IOMUXC_SW_PAD_CTL_PAD_SPEED(2)
            | IOMUXC_SW_PAD_CTL_PAD_DSE(1)
            | IOMUXC_SW_PAD_CTL_PAD_SRE(0));
}

digitalinout_result_t common_hal_digitalio_digitalinout_construct(
        digitalio_digitalinout_obj_t* self, const mcu_pin_obj_t* pin) {
    claim_pin(pin);
    self->pin = pin;
    self->output = false;
    self->open_drain = false;
    self->pull = PULL_NONE;

    // GPIO is always IOMUXC_SW_MUX_CTL_PAD_MUX_MODE_ALT5 until proven otherwise
    IOMUXC_SetPinMux(pin->mux_reg, IOMUXC_SW_MUX_CTL_PAD_MUX_MODE_ALT5, 0, 0, 0, 0);

    pin_config(pin, self->open_drain, self->pull);

    const gpio_pin_config_t config = { kGPIO_DigitalInput, 0, kGPIO_NoIntmode };
    GPIO_PinInit(self->pin->gpio, self->pin->number, &config);

    return DIGITALINOUT_OK;
}

void common_hal_digitalio_digitalinout_never_reset(
        digitalio_digitalinout_obj_t *self) {
    common_hal_never_reset_pin(self->pin);
}

bool common_hal_digitalio_digitalinout_deinited(digitalio_digitalinout_obj_t* self) {
    return self->pin == NULL;
}

void common_hal_digitalio_digitalinout_deinit(digitalio_digitalinout_obj_t* self) {
    if (common_hal_digitalio_digitalinout_deinited(self)) {
        return;
    }
    common_hal_reset_pin(self->pin);
    self->pin = NULL;
}

void common_hal_digitalio_digitalinout_switch_to_input(
        digitalio_digitalinout_obj_t* self, digitalio_pull_t pull) {
    self->output = false;

    // This also sets direction to input.
    common_hal_digitalio_digitalinout_set_pull(self, pull);
}

digitalinout_result_t common_hal_digitalio_digitalinout_switch_to_output(
        digitalio_digitalinout_obj_t* self, bool value,
        digitalio_drive_mode_t drive_mode) {
    self->output = true;
    self->open_drain = drive_mode == DRIVE_MODE_OPEN_DRAIN;
    self->pull = PULL_NONE;

    pin_config(self->pin, self->open_drain, self->pull);

    const gpio_pin_config_t config = { kGPIO_DigitalOutput, value, kGPIO_NoIntmode };
    GPIO_PinInit(self->pin->gpio, self->pin->number, &config);
    return DIGITALINOUT_OK;
}

digitalio_direction_t common_hal_digitalio_digitalinout_get_direction(
        digitalio_digitalinout_obj_t* self) {
    return self->output ? DIRECTION_OUTPUT : DIRECTION_INPUT;
}

void common_hal_digitalio_digitalinout_set_value(
        digitalio_digitalinout_obj_t* self, bool value) {
    GPIO_PinWrite(self->pin->gpio, self->pin->number, value);
}

bool common_hal_digitalio_digitalinout_get_value(
        digitalio_digitalinout_obj_t* self) {
    return GPIO_PinRead(self->pin->gpio, self->pin->number);
}

digitalinout_result_t common_hal_digitalio_digitalinout_set_drive_mode(
        digitalio_digitalinout_obj_t* self,
        digitalio_drive_mode_t drive_mode) {
    bool value = common_hal_digitalio_digitalinout_get_value(self);
    self->open_drain = drive_mode == DRIVE_MODE_OPEN_DRAIN;

    pin_config(self->pin, self->open_drain, self->pull);

    // True is implemented differently between modes so reset the value to make
    // sure it's correct for the new mode.
    if (value) {
        common_hal_digitalio_digitalinout_set_value(self, value);
    }
    return DIGITALINOUT_OK;
}

digitalio_drive_mode_t common_hal_digitalio_digitalinout_get_drive_mode(
        digitalio_digitalinout_obj_t* self) {
    if (self->open_drain) {
        return DRIVE_MODE_OPEN_DRAIN;
    } else {
        return DRIVE_MODE_PUSH_PULL;
    }
}

void common_hal_digitalio_digitalinout_set_pull(
        digitalio_digitalinout_obj_t* self, digitalio_pull_t pull) {
    self->pull = pull;

    pin_config(self->pin, self->open_drain, self->pull);

    const gpio_pin_config_t config = { kGPIO_DigitalInput, 0, kGPIO_NoIntmode };
    GPIO_PinInit(self->pin->gpio, self->pin->number, &config);
}

digitalio_pull_t common_hal_digitalio_digitalinout_get_pull(
        digitalio_digitalinout_obj_t* self) {
    if (self->output) {
        mp_raise_AttributeError(translate("Cannot get pull while in output mode"));
        return PULL_NONE;
    } else {
        return self->pull;
    }
}