djsundog
/
circuitpython
1
0
Fork 0
Code Issues Pull Requests Packages Projects Releases Wiki Activity
circuitpython/stmhal/hal/src/stm32f4xx_hal_adc_ex.c

839 lines
29 KiB
C
Raw Blame History

/**
******************************************************************************
* @file stm32f4xx_hal_adc_ex.c
* @author MCD Application Team
* @version V1.0.0
* @date 18-February-2014
* @brief This file provides firmware functions to manage the following
* functionalities of the ADC extension peripheral:
* + Extended features functions
*
@verbatim
==============================================================================
##### How to use this driver #####
==============================================================================
[..]
(#)Initialize the ADC low level resources by implementing the HAL_ADC_MspInit():
(##) Enable the ADC interface clock using __ADC_CLK_ENABLE()
(##) ADC pins configuration
(+++) Enable the clock for the ADC GPIOs using the following function:
__GPIOx_CLK_ENABLE()
(+++) Configure these ADC pins in analog mode using HAL_GPIO_Init()
(##) In case of using interrupts (e.g. HAL_ADC_Start_IT())
(+++) Configure the ADC interrupt priority using HAL_NVIC_SetPriority()
(+++) Enable the ADC IRQ handler using HAL_NVIC_EnableIRQ()
(+++) In ADC IRQ handler, call HAL_ADC_IRQHandler()
(##) In case of using DMA to control data transfer (e.g. HAL_ADC_Start_DMA())
(++) Enable the DMAx interface clock using __DMAx_CLK_ENABLE()
(++) Configure and enable two DMA streams stream for managing data
transfer from peripheral to memory (output stream)
(++) Associate the initilalized DMA handle to the CRYP DMA handle
using __HAL_LINKDMA()
(++) Configure the priority and enable the NVIC for the transfer complete
interrupt on the two DMA Streams. The output stream should have higher
priority than the input stream.
(#) Configure the ADC Prescaler, conversion resolution and data alignment
using the HAL_ADC_Init() function.
(#) Configure the ADC Injected channels group features, use HAL_ADC_Init()
and HAL_ADC_ConfigChannel() functions.
(#) Three mode of operations are available within this driver :
*** Polling mode IO operation ***
=================================
[..]
(+) Start the ADC peripheral using HAL_ADCEx_InjectedStart()
(+) Wait for end of conversion using HAL_ADC_PollForConversion(), at this stage
user can specify the value of timeout according to his end application
(+) To read the ADC converted values, use the HAL_ADCEx_InjectedGetValue() function.
(+) Stop the ADC peripheral using HAL_ADCEx_InjectedStop()
*** Interrupt mode IO operation ***
===================================
[..]
(+) Start the ADC peripheral using HAL_ADCEx_InjectedStart_IT()
(+) Use HAL_ADC_IRQHandler() called under ADC_IRQHandler() Interrupt subroutine
(+) At ADC end of conversion HAL_ADCEx_InjectedConvCpltCallback() function is executed and user can
add his own code by customization of function pointer HAL_ADCEx_InjectedConvCpltCallback
(+) In case of ADC Error, HAL_ADCEx_InjectedErrorCallback() function is executed and user can
add his own code by customization of function pointer HAL_ADCEx_InjectedErrorCallback
(+) Stop the ADC peripheral using HAL_ADCEx_InjectedStop_IT()
*** DMA mode IO operation ***
==============================
[..]
(+) Start the ADC peripheral using HAL_ADCEx_InjectedStart_DMA(), at this stage the user specify the length
of data to be transfered at each end of conversion
(+) At The end of data transfer ba HAL_ADCEx_InjectedConvCpltCallback() function is executed and user can
add his own code by customization of function pointer HAL_ADCEx_InjectedConvCpltCallback
(+) In case of transfer Error, HAL_ADCEx_InjectedErrorCallback() function is executed and user can
add his own code by customization of function pointer HAL_ADCEx_InjectedErrorCallback
(+) Stop the ADC peripheral using HAL_ADCEx_InjectedStop_DMA()
*** Multi mode ADCs Regular channels configuration ***
======================================================
[..]
(+) Select the Multi mode ADC regular channels features (dual or triple mode)
and configure the DMA mode using HAL_ADCEx_MultiModeConfigChannel() functions.
(+) Start the ADC peripheral using HAL_ADCEx_MultiModeStart_DMA(), at this stage the user specify the length
of data to be transfered at each end of conversion
(+) Read the ADCs converted values using the HAL_ADCEx_MultiModeGetValue() function.
@endverbatim
******************************************************************************
* @attention
*
* <h2><center>&copy; COPYRIGHT(c) 2014 STMicroelectronics</center></h2>
*
* Redistribution and use in source and binary forms, with or without modification,
* are permitted provided that the following conditions are met:
* 1. Redistributions of source code must retain the above copyright notice,
* this list of conditions and the following disclaimer.
* 2. Redistributions in binary form must reproduce the above copyright notice,
* this list of conditions and the following disclaimer in the documentation
* and/or other materials provided with the distribution.
* 3. Neither the name of STMicroelectronics nor the names of its contributors
* may be used to endorse or promote products derived from this software
* without specific prior written permission.
*
* THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
* AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
* IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
* DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE
* FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
* DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
* SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
* CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
* OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
* OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
*
******************************************************************************
*/
/* Includes ------------------------------------------------------------------*/
#include "stm32f4xx_hal.h"
/** @addtogroup STM32F4xx_HAL_Driver
* @{
*/
/** @defgroup ADCEx
* @brief ADC Extended driver modules
* @{
*/
#ifdef HAL_ADC_MODULE_ENABLED
/* Private typedef -----------------------------------------------------------*/
/* Private define ------------------------------------------------------------*/
/* Private macro -------------------------------------------------------------*/
/* Private variables ---------------------------------------------------------*/
/* Private function prototypes -----------------------------------------------*/
static void ADC_MultiModeDMAConvCplt(DMA_HandleTypeDef *hdma);
static void ADC_MultiModeDMAError(DMA_HandleTypeDef *hdma);
static void ADC_MultiModeDMAHalfConvCplt(DMA_HandleTypeDef *hdma);
/* Private functions ---------------------------------------------------------*/
/** @defgroup ADCEx_Private_Functions
* @{
*/
/** @defgroup ADCEx_Group1 Extended features functions
* @brief Extended features functions
*
@verbatim
===============================================================================
##### Extended features functions #####
===============================================================================
[..] This section provides functions allowing to:
(+) Start conversion of injected channel.
(+) Stop conversion of injected channel.
(+) Start multimode and enable DMA transfer.
(+) Stop multimode and disable DMA transfer.
(+) Get result of injected channel conversion.
(+) Get result of multimode conversion.
(+) Configure injected channels.
(+) Configure multimode.
@endverbatim
* @{
*/
/**
* @brief Enables the selected ADC software start conversion of the injected channels.
* @param hadc: pointer to a ADC_HandleTypeDef structure that contains
* the configuration information for the specified ADC.
* @retval HAL status
*/
HAL_StatusTypeDef HAL_ADCEx_InjectedStart(ADC_HandleTypeDef* hadc)
{
uint32_t i = 0, tmp1 = 0, tmp2 = 0;
/* Process locked */
__HAL_LOCK(hadc);
/* Check if a regular conversion is ongoing */
if(hadc->State == HAL_ADC_STATE_BUSY_REG)
{
/* Change ADC state */
hadc->State = HAL_ADC_STATE_BUSY_INJ_REG;
}
else
{
/* Change ADC state */
hadc->State = HAL_ADC_STATE_BUSY_INJ;
}
/* Check if ADC peripheral is disabled in order to enable it and wait during
Tstab time the ADC's stabilization */
if((hadc->Instance->CR2 & ADC_CR2_ADON) != ADC_CR2_ADON)
{
/* Enable the Peripheral */
__HAL_ADC_ENABLE(hadc);
/* Delay inserted to wait during Tstab time the ADC's stabilazation */
for(; i <= 540; i++)
{
__NOP();
}
}
/* Check if Multimode enabled */
if(HAL_IS_BIT_CLR(ADC->CCR, ADC_CCR_MULTI))
{
tmp1 = HAL_IS_BIT_CLR(hadc->Instance->CR2, ADC_CR2_JEXTEN);
tmp2 = HAL_IS_BIT_CLR(hadc->Instance->CR1, ADC_CR1_JAUTO);
if(tmp1 && tmp2)
{
/* Enable the selected ADC software conversion for injected group */
hadc->Instance->CR2 |= ADC_CR2_JSWSTART;
}
}
else
{
tmp1 = HAL_IS_BIT_CLR(hadc->Instance->CR2, ADC_CR2_JEXTEN);
tmp2 = HAL_IS_BIT_CLR(hadc->Instance->CR1, ADC_CR1_JAUTO);
if((hadc->Instance == ADC1) && tmp1 && tmp2)
{
/* Enable the selected ADC software conversion for injected group */
hadc->Instance->CR2 |= ADC_CR2_JSWSTART;
}
}
/* Process unlocked */
__HAL_UNLOCK(hadc);
/* Return function status */
return HAL_OK;
}
/**
* @brief Enables the interrupt and starts ADC conversion of injected channels.
* @param hadc: pointer to a ADC_HandleTypeDef structure that contains
* the configuration information for the specified ADC.
*
* @retval HAL status.
*/
HAL_StatusTypeDef HAL_ADCEx_InjectedStart_IT(ADC_HandleTypeDef* hadc)
{
uint32_t i = 0, tmp1 = 0, tmp2 =0;
/* Process locked */
__HAL_LOCK(hadc);
/* Check if a regular conversion is ongoing */
if(hadc->State == HAL_ADC_STATE_BUSY_REG)
{
/* Change ADC state */
hadc->State = HAL_ADC_STATE_BUSY_INJ_REG;
}
else
{
/* Change ADC state */
hadc->State = HAL_ADC_STATE_BUSY_INJ;
}
/* Set ADC error code to none */
hadc->ErrorCode = HAL_ADC_ERROR_NONE;
/* Check if ADC peripheral is disabled in order to enable it and wait during
Tstab time the ADC's stabilization */
if((hadc->Instance->CR2 & ADC_CR2_ADON) != ADC_CR2_ADON)
{
/* Enable the Peripheral */
__HAL_ADC_ENABLE(hadc);
/* Delay inserted to wait during Tstab time the ADC's stabilazation */
for(; i <= 540; i++)
{
__NOP();
}
}
/* Enable the ADC end of conversion interrupt for injected group */
__HAL_ADC_ENABLE_IT(hadc, ADC_IT_JEOC);
/* Enable the ADC overrun interrupt */
__HAL_ADC_ENABLE_IT(hadc, ADC_IT_OVR);
/* Check if Multimode enabled */
if(HAL_IS_BIT_CLR(ADC->CCR, ADC_CCR_MULTI))
{
tmp1 = HAL_IS_BIT_CLR(hadc->Instance->CR2, ADC_CR2_JEXTEN);
tmp2 = HAL_IS_BIT_CLR(hadc->Instance->CR1, ADC_CR1_JAUTO);
if(tmp1 && tmp2)
{
/* Enable the selected ADC software conversion for injected group */
hadc->Instance->CR2 |= ADC_CR2_JSWSTART;
}
}
else
{
tmp1 = HAL_IS_BIT_CLR(hadc->Instance->CR2, ADC_CR2_JEXTEN);
tmp2 = HAL_IS_BIT_CLR(hadc->Instance->CR1, ADC_CR1_JAUTO);
if((hadc->Instance == ADC1) && tmp1 && tmp2)
{
/* Enable the selected ADC software conversion for injected group */
hadc->Instance->CR2 |= ADC_CR2_JSWSTART;
}
}
/* Process unlocked */
__HAL_UNLOCK(hadc);
/* Return function status */
return HAL_OK;
}
/**
* @brief Disables ADC and stop conversion of injected channels.
*
* @note Caution: This function will stop also regular channels.
*
* @param hadc: pointer to a ADC_HandleTypeDef structure that contains
* the configuration information for the specified ADC.
* @retval HAL status.
*/
HAL_StatusTypeDef HAL_ADCEx_InjectedStop(ADC_HandleTypeDef* hadc)
{
/* Disable the Peripheral */
__HAL_ADC_DISABLE(hadc);
/* Change ADC state */
hadc->State = HAL_ADC_STATE_READY;
/* Return function status */
return HAL_OK;
}
/**
* @brief Poll for injected conversion complete
* @param hadc: pointer to a ADC_HandleTypeDef structure that contains
* the configuration information for the specified ADC.
* @param Timeout: Timeout value in millisecond.
* @retval HAL status
*/
HAL_StatusTypeDef HAL_ADCEx_InjectedPollForConversion(ADC_HandleTypeDef* hadc, uint32_t Timeout)
{
uint32_t timeout;
/* Get timeout */
timeout = HAL_GetTick() + Timeout;
/* Check End of conversion flag */
while(!(__HAL_ADC_GET_FLAG(hadc, ADC_FLAG_JEOC)))
{
/* Check for the Timeout */
if(Timeout != HAL_MAX_DELAY)
{
if(HAL_GetTick() >= timeout)
{
hadc->State= HAL_ADC_STATE_TIMEOUT;
/* Process unlocked */
__HAL_UNLOCK(hadc);
return HAL_TIMEOUT;
}
}
}
/* Check if a regular conversion is ready */
if(hadc->State == HAL_ADC_STATE_EOC_REG)
{
/* Change ADC state */
hadc->State = HAL_ADC_STATE_EOC_INJ_REG;
}
else
{
/* Change ADC state */
hadc->State = HAL_ADC_STATE_EOC_INJ;
}
/* Return ADC state */
return HAL_OK;
}
/**
* @brief Disables the interrupt and stop ADC conversion of injected channels.
*
* @note Caution: This function will stop also regular channels.
*
* @param hadc: pointer to a ADC_HandleTypeDef structure that contains
* the configuration information for the specified ADC.
* @retval HAL status.
*/
HAL_StatusTypeDef HAL_ADCEx_InjectedStop_IT(ADC_HandleTypeDef* hadc)
{
/* Disable the ADC end of conversion interrupt for regular group */
__HAL_ADC_DISABLE_IT(hadc, ADC_IT_EOC);
/* Disable the ADC end of conversion interrupt for injected group */
__HAL_ADC_DISABLE_IT(hadc, ADC_CR1_JEOCIE);
/* Enable the Periphral */
__HAL_ADC_DISABLE(hadc);
/* Change ADC state */
hadc->State = HAL_ADC_STATE_READY;
/* Return function status */
return HAL_OK;
}
/**
* @brief Gets the converted value from data register of injected channel.
* @param hadc: pointer to a ADC_HandleTypeDef structure that contains
* the configuration information for the specified ADC.
* @param InjectedRank: the ADC injected rank.
* This parameter can be one of the following values:
* @arg ADC_InjectedChannel_1: Injected Channel1 selected
* @arg ADC_InjectedChannel_2: Injected Channel2 selected
* @arg ADC_InjectedChannel_3: Injected Channel3 selected
* @arg ADC_InjectedChannel_4: Injected Channel4 selected
* @retval None
*/
uint32_t HAL_ADCEx_InjectedGetValue(ADC_HandleTypeDef* hadc, uint32_t InjectedRank)
{
__IO uint32_t tmp = 0;
/* Check the parameters */
assert_param(IS_ADC_INJECTED_RANK(InjectedRank));
/* Clear the ADCx's flag for injected end of conversion */
__HAL_ADC_CLEAR_FLAG(hadc,ADC_FLAG_JEOC);
/* Return the selected ADC converted value */
switch(InjectedRank)
{
case ADC_INJECTED_RANK_4:
{
tmp = hadc->Instance->JDR4;
}
break;
case ADC_INJECTED_RANK_3:
{
tmp = hadc->Instance->JDR3;
}
break;
case ADC_INJECTED_RANK_2:
{
tmp = hadc->Instance->JDR2;
}
break;
case ADC_INJECTED_RANK_1:
{
tmp = hadc->Instance->JDR1;
}
break;
default:
break;
}
return tmp;
}
/**
* @brief Enables ADC DMA request after last transfer (Multi-ADC mode) and enables ADC peripheral
*
* @note Caution: This function must be used only with the ADC master.
*
* @param hadc: pointer to a ADC_HandleTypeDef structure that contains
* the configuration information for the specified ADC.
* @param pData: Pointer to buffer in which transferred from ADC peripheral to memory will be stored.
* @param Length: The length of data to be transferred from ADC peripheral to memory.
* @retval None
*/
HAL_StatusTypeDef HAL_ADCEx_MultiModeStart_DMA(ADC_HandleTypeDef* hadc, uint32_t* pData, uint32_t Length)
{
uint16_t counter = 0;
/* Check the parameters */
assert_param(IS_FUNCTIONAL_STATE(hadc->Init.ContinuousConvMode));
assert_param(IS_ADC_EXT_TRIG_EDGE(hadc->Init.ExternalTrigConvEdge));
assert_param(IS_FUNCTIONAL_STATE(hadc->Init.DMAContinuousRequests));
/* Process locked */
__HAL_LOCK(hadc);
/* Enable ADC overrun interrupt */
__HAL_ADC_ENABLE_IT(hadc, ADC_IT_OVR);
if (hadc->Init.DMAContinuousRequests != DISABLE)
{
/* Enable the selected ADC DMA request after last transfer */
ADC->CCR |= ADC_CCR_DDS;
}
else
{
/* Disable the selected ADC EOC rising on each regular channel conversion */
ADC->CCR &= ~ADC_CCR_DDS;
}
/* Set the DMA transfer complete callback */
hadc->DMA_Handle->XferCpltCallback = ADC_MultiModeDMAConvCplt;
/* Set the DMA half transfer complete callback */
hadc->DMA_Handle->XferHalfCpltCallback = ADC_MultiModeDMAHalfConvCplt;
/* Set the DMA error callback */
hadc->DMA_Handle->XferErrorCallback = ADC_MultiModeDMAError ;
/* Enable the DMA Stream */
HAL_DMA_Start_IT(hadc->DMA_Handle, (uint32_t)&ADC->CDR, (uint32_t)pData, Length);
/* Change ADC state */
hadc->State = HAL_ADC_STATE_BUSY_REG;
/* Check if ADC peripheral is disabled in order to enable it and wait during
Tstab time the ADC's stabilization */
if((hadc->Instance->CR2 & ADC_CR2_ADON) != ADC_CR2_ADON)
{
/* Enable the Peripheral */
__HAL_ADC_ENABLE(hadc);
/* Delay inserted to wait during Tstab time the ADC's stabilazation */
for(; counter <= 540; counter++)
{
__NOP();
}
}
/* if no external trigger present enable software conversion of regular channels */
if (hadc->Init.ExternalTrigConvEdge == ADC_EXTERNALTRIGCONVEDGE_NONE)
{
/* Enable the selected ADC software conversion for regular group */
hadc->Instance->CR2 |= (uint32_t)ADC_CR2_SWSTART;
}
/* Process unlocked */
__HAL_UNLOCK(hadc);
/* Return function status */
return HAL_OK;
}
/**
* @brief Disables ADC DMA (multi-ADC mode) and disables ADC peripheral
* @param hadc: pointer to a ADC_HandleTypeDef structure that contains
* the configuration information for the specified ADC.
* @retval None
*/
HAL_StatusTypeDef HAL_ADCEx_MultiModeStop_DMA(ADC_HandleTypeDef* hadc)
{
/* Process locked */
__HAL_LOCK(hadc);
/* Enable the Peripheral */
__HAL_ADC_DISABLE(hadc);
/* Disable ADC overrun interrupt */
__HAL_ADC_DISABLE_IT(hadc, ADC_IT_OVR);
/* Disable the selected ADC DMA request after last transfer */
ADC->CCR &= ~ADC_CCR_DDS;
/* Disable the ADC DMA Stream */
HAL_DMA_Abort(hadc->DMA_Handle);
/* Change ADC state */
hadc->State = HAL_ADC_STATE_READY;
/* Process unlocked */
__HAL_UNLOCK(hadc);
/* Return function status */
return HAL_OK;
}
/**
* @brief Returns the last ADC1, ADC2 and ADC3 regular conversions results
* data in the selected multi mode.
* @param hadc: pointer to a ADC_HandleTypeDef structure that contains
* the configuration information for the specified ADC.
* @retval The converted data value.
*/
uint32_t HAL_ADCEx_MultiModeGetValue(ADC_HandleTypeDef* hadc)
{
/* Return the multi mode conversion value */
return ADC->CDR;
}
/**
* @brief Injected conversion complete callback in non blocking mode
* @param hadc: pointer to a ADC_HandleTypeDef structure that contains
* the configuration information for the specified ADC.
* @retval None
*/
__weak void HAL_ADCEx_InjectedConvCpltCallback(ADC_HandleTypeDef* hadc)
{
/* NOTE : This function Should not be modified, when the callback is needed,
the HAL_ADC_InjectedConvCpltCallback could be implemented in the user file
*/
}
/**
* @brief Configures for the selected ADC injected channel its corresponding
* rank in the sequencer and its sample time.
* @param hadc: pointer to a ADC_HandleTypeDef structure that contains
* the configuration information for the specified ADC.
* @param sConfigInjected: ADC configuration structure for injected channel.
* @retval None
*/
HAL_StatusTypeDef HAL_ADCEx_InjectedConfigChannel(ADC_HandleTypeDef* hadc, ADC_InjectionConfTypeDef* sConfigInjected)
{
#ifdef USE_FULL_ASSERT
uint32_t tmp = 0;
#endif /* USE_FULL_ASSERT */
/* Check the parameters */
assert_param(IS_ADC_CHANNEL(sConfigInjected->InjectedChannel));
assert_param(IS_ADC_INJECTED_RANK(sConfigInjected->InjectedRank));
assert_param(IS_ADC_SAMPLE_TIME(sConfigInjected->InjectedSamplingTime));
assert_param(IS_ADC_EXT_INJEC_TRIG(sConfigInjected->ExternalTrigInjecConv));
assert_param(IS_ADC_EXT_INJEC_TRIG_EDGE(sConfigInjected->ExternalTrigInjecConvEdge));
assert_param(IS_ADC_INJECTED_LENGTH(sConfigInjected->InjectedNbrOfConversion));
assert_param(IS_FUNCTIONAL_STATE(sConfigInjected->AutoInjectedConv));
assert_param(IS_FUNCTIONAL_STATE(sConfigInjected->InjectedDiscontinuousConvMode));
#ifdef USE_FULL_ASSERT
tmp = __HAL_ADC_GET_RESOLUTION(hadc);
assert_param(IS_ADC_RANGE(tmp, sConfigInjected->InjectedOffset));
#endif /* USE_FULL_ASSERT */
/* Process locked */
__HAL_LOCK(hadc);
/* if ADC_Channel_10 ... ADC_Channel_18 is selected */
if (sConfigInjected->InjectedChannel > ADC_CHANNEL_9)
{
/* Clear the old sample time */
hadc->Instance->SMPR1 &= ~__HAL_ADC_SMPR1(ADC_SMPR1_SMP10, sConfigInjected->InjectedChannel);
/* Set the new sample time */
hadc->Instance->SMPR1 |= __HAL_ADC_SMPR1(sConfigInjected->InjectedSamplingTime, sConfigInjected->InjectedChannel);
}
else /* ADC_Channel include in ADC_Channel_[0..9] */
{
/* Clear the old sample time */
hadc->Instance->SMPR2 &= ~__HAL_ADC_SMPR2(ADC_SMPR2_SMP0, sConfigInjected->InjectedChannel);
/* Set the new sample time */
hadc->Instance->SMPR2 |= __HAL_ADC_SMPR2(sConfigInjected->InjectedSamplingTime, sConfigInjected->InjectedChannel);
}
/*---------------------------- ADCx JSQR Configuration -----------------*/
hadc->Instance->JSQR &= ~(ADC_JSQR_JL);
hadc->Instance->JSQR |= __HAL_ADC_SQR1(sConfigInjected->InjectedNbrOfConversion);
/* Rank configuration */
/* Clear the old SQx bits for the selected rank */
hadc->Instance->JSQR &= ~__HAL_ADC_JSQR(ADC_JSQR_JSQ1, sConfigInjected->InjectedRank,sConfigInjected->InjectedNbrOfConversion);
/* Set the SQx bits for the selected rank */
hadc->Instance->JSQR |= __HAL_ADC_JSQR(sConfigInjected->InjectedChannel, sConfigInjected->InjectedRank,sConfigInjected->InjectedNbrOfConversion);
/* Select external trigger to start conversion */
hadc->Instance->CR2 &= ~(ADC_CR2_JEXTSEL);
hadc->Instance->CR2 |= sConfigInjected->ExternalTrigInjecConv;
/* Select external trigger polarity */
hadc->Instance->CR2 &= ~(ADC_CR2_JEXTEN);
hadc->Instance->CR2 |= sConfigInjected->ExternalTrigInjecConvEdge;
if (sConfigInjected->AutoInjectedConv != DISABLE)
{
/* Enable the selected ADC automatic injected group conversion */
hadc->Instance->CR1 |= ADC_CR1_JAUTO;
}
else
{
/* Disable the selected ADC automatic injected group conversion */
hadc->Instance->CR1 &= ~(ADC_CR1_JAUTO);
}
if (sConfigInjected->InjectedDiscontinuousConvMode != DISABLE)
{
/* Enable the selected ADC injected discontinuous mode */
hadc->Instance->CR1 |= ADC_CR1_JDISCEN;
}
else
{
/* Disable the selected ADC injected discontinuous mode */
hadc->Instance->CR1 &= ~(ADC_CR1_JDISCEN);
}
switch(sConfigInjected->InjectedRank)
{
case 1:
/* Set injected channel 1 offset */
hadc->Instance->JOFR1 &= ~(ADC_JOFR1_JOFFSET1);
hadc->Instance->JOFR1 |= sConfigInjected->InjectedOffset;
break;
case 2:
/* Set injected channel 2 offset */
hadc->Instance->JOFR2 &= ~(ADC_JOFR2_JOFFSET2);
hadc->Instance->JOFR2 |= sConfigInjected->InjectedOffset;
break;
case 3:
/* Set injected channel 3 offset */
hadc->Instance->JOFR3 &= ~(ADC_JOFR3_JOFFSET3);
hadc->Instance->JOFR3 |= sConfigInjected->InjectedOffset;
break;
default:
/* Set injected channel 4 offset */
hadc->Instance->JOFR4 &= ~(ADC_JOFR4_JOFFSET4);
hadc->Instance->JOFR4 |= sConfigInjected->InjectedOffset;
break;
}
/* if ADC1 Channel_18 is selected enable VBAT Channel */
if ((hadc->Instance == ADC1) && (sConfigInjected->InjectedChannel == ADC_CHANNEL_VBAT))
{
/* Enable the VBAT channel*/
ADC->CCR |= ADC_CCR_VBATE;
}
/* if ADC1 Channel_16 or Channel_17 is selected enable TSVREFE Channel(Temperature sensor and VREFINT) */
if ((hadc->Instance == ADC1) && ((sConfigInjected->InjectedChannel == ADC_CHANNEL_TEMPSENSOR) || (sConfigInjected->InjectedChannel == ADC_CHANNEL_VREFINT)))
{
/* Enable the TSVREFE channel*/
ADC->CCR |= ADC_CCR_TSVREFE;
}
/* Process unlocked */
__HAL_UNLOCK(hadc);
/* Return function status */
return HAL_OK;
}
/**
* @brief Configures the ADC multi-mode
* @param hadc : pointer to a ADC_HandleTypeDef structure that contains
* the configuration information for the specified ADC.
* @param multimode : pointer to an ADC_MultiModeTypeDef structure that contains
* the configuration information for multimode.
* @retval HAL status
*/
HAL_StatusTypeDef HAL_ADCEx_MultiModeConfigChannel(ADC_HandleTypeDef* hadc, ADC_MultiModeTypeDef* multimode)
{
/* Check the parameters */
assert_param(IS_ADC_MODE(multimode->Mode));
assert_param(IS_ADC_DMA_ACCESS_MODE(multimode->DMAAccessMode));
assert_param(IS_ADC_SAMPLING_DELAY(multimode->TwoSamplingDelay));
/* Process locked */
__HAL_LOCK(hadc);
/* Set ADC mode */
ADC->CCR &= ~(ADC_CCR_MULTI);
ADC->CCR |= multimode->Mode;
/* Set the ADC DMA access mode */
ADC->CCR &= ~(ADC_CCR_DMA);
ADC->CCR |= multimode->DMAAccessMode;
/* Set delay between two sampling phases */
ADC->CCR &= ~(ADC_CCR_DELAY);
ADC->CCR |= multimode->TwoSamplingDelay;
/* Process unlocked */
__HAL_UNLOCK(hadc);
/* Return function status */
return HAL_OK;
}
/**
* @}
*/
/**
* @brief DMA transfer complete callback.
* @param hdma: pointer to DMA handle.
* @retval None
*/
static void ADC_MultiModeDMAConvCplt(DMA_HandleTypeDef *hdma)
{
ADC_HandleTypeDef* hadc = ( ADC_HandleTypeDef* )((DMA_HandleTypeDef* )hdma)->Parent;
/* Check if an injected conversion is ready */
if(hadc->State == HAL_ADC_STATE_EOC_INJ)
{
/* Change ADC state */
hadc->State = HAL_ADC_STATE_EOC_INJ_REG;
}
else
{
/* Change ADC state */
hadc->State = HAL_ADC_STATE_EOC_REG;
}
HAL_ADC_ConvCpltCallback(hadc);
}
/**
* @brief DMA half transfer complete callback.
* @param hdma: pointer to DMA handle.
* @retval None
*/
static void ADC_MultiModeDMAHalfConvCplt(DMA_HandleTypeDef *hdma)
{
ADC_HandleTypeDef* hadc = ( ADC_HandleTypeDef* )((DMA_HandleTypeDef* )hdma)->Parent;
/* Conversion complete callback */
HAL_ADC_ConvHalfCpltCallback(hadc);
}
/**
* @brief DMA error callback
* @param hdma: pointer to DMA handle.
* @retval None
*/
static void ADC_MultiModeDMAError(DMA_HandleTypeDef *hdma)
{
ADC_HandleTypeDef* hadc = ( ADC_HandleTypeDef* )((DMA_HandleTypeDef* )hdma)->Parent;
hadc->State= HAL_ADC_STATE_ERROR;
/* Set ADC error code to DMA error */
hadc->ErrorCode |= HAL_ADC_ERROR_DMA;
HAL_ADC_ErrorCallback(hadc);
}
/**
* @}
*/
#endif /* HAL_ADC_MODULE_ENABLED */
/**
* @}
*/
/**
* @}
*/
/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/
Reference in New Issue View Git Blame Copy Permalink