1866ed7e2e
This commit implements 10/100 Mbit Ethernet support in the mimxrt port. The following boards are configured without ETH network: - MIMXRT1010_EVK - Teensy 4.0 The following boards are configured with ETH network: - MIMXRT1020_EVK - MIMXRT1050_EVK - MIMXRT1060_EVK - MIMXRT1064_EVK - Teensy 4.1 Ethernet support tested with TEENSY 4.1, MIMRTX1020_EVK and MIMXRT1050_EVK. Build tested with Teensy 4.0 and MIMXRT1010_EVK to be still working. Compiles and builds properly for MIMXRT1060_EVK and MIMXRT1064_EVK, but not tested lacking suitable boards. Tested functions are: - ping works bothway - simple UDP transfer works bothway - ntptime works - the ftp server works - secure socker works - telnet and webrepl works The MAC address is 0x02 plus 5 bytes from the manifacturing info field, which can be considered as unique per device. Some boards do not wire the RESET and INT pin of the PHY transceiver. For operation, these are not required. If they are defined, they will be used.
141 lines
6.2 KiB
C
141 lines
6.2 KiB
C
#define MICROPY_HW_BOARD_NAME "i.MX RT1020 EVK"
|
|
#define MICROPY_HW_MCU_NAME "MIMXRT1021DAG5A"
|
|
|
|
// i.MX RT1020 EVK has 1 board LED
|
|
// Todo: think about replacing the define with searching in the generated pins?
|
|
#define MICROPY_HW_LED1_PIN (pin_GPIO_AD_B0_05)
|
|
#define MICROPY_HW_LED_ON(pin) (mp_hal_pin_low(pin))
|
|
#define MICROPY_HW_LED_OFF(pin) (mp_hal_pin_high(pin))
|
|
|
|
#define MICROPY_HW_NUM_PIN_IRQS (3 * 32)
|
|
|
|
// Define mapping logical UART # to hardware UART #
|
|
// RX/TX HW-UART Logical UART
|
|
// D3/D5 LPUART1 Not usable, Since D3 is blocked.
|
|
// D0/D1 LPUART2 -> 1
|
|
// D6/D9 LPUART3 -> 2
|
|
// D10/D12 LPUART5 -> 3
|
|
// D14/D15 LPUART8 -> 4
|
|
// A0/A1 LPUART4 -> 5
|
|
|
|
#define MICROPY_HW_UART_NUM (sizeof(uart_index_table) / sizeof(uart_index_table)[0])
|
|
#define MICROPY_HW_UART_INDEX { 0, 2, 3, 5, 8, 4 }
|
|
|
|
#define IOMUX_TABLE_UART \
|
|
{ IOMUXC_GPIO_AD_B0_06_LPUART1_TX }, { IOMUXC_GPIO_AD_B0_07_LPUART1_RX }, \
|
|
{ IOMUXC_GPIO_AD_B1_08_LPUART2_TX }, { IOMUXC_GPIO_AD_B1_09_LPUART2_RX }, \
|
|
{ IOMUXC_GPIO_AD_B0_14_LPUART3_TX }, { IOMUXC_GPIO_AD_B0_15_LPUART3_RX }, \
|
|
{ IOMUXC_GPIO_AD_B1_10_LPUART4_TX }, { IOMUXC_GPIO_AD_B1_11_LPUART4_RX }, \
|
|
{ IOMUXC_GPIO_AD_B0_10_LPUART5_TX }, { IOMUXC_GPIO_AD_B0_11_LPUART5_RX }, \
|
|
{ 0 }, { 0 }, \
|
|
{ 0 }, { 0 }, \
|
|
{ IOMUXC_GPIO_SD_B1_02_LPUART8_TX }, { IOMUXC_GPIO_SD_B1_03_LPUART8_RX },
|
|
|
|
#define MICROPY_HW_SPI_INDEX { 1, 3 }
|
|
|
|
#define IOMUX_TABLE_SPI \
|
|
{ IOMUXC_GPIO_AD_B0_10_LPSPI1_SCK }, { IOMUXC_GPIO_AD_B0_11_LPSPI1_PCS0 }, \
|
|
{ IOMUXC_GPIO_AD_B0_12_LPSPI1_SDO }, { IOMUXC_GPIO_AD_B0_13_LPSPI1_SDI }, \
|
|
{ 0 }, { 0 }, \
|
|
{ 0 }, { 0 }, \
|
|
{ IOMUXC_GPIO_AD_B1_12_LPSPI3_SCK }, { IOMUXC_GPIO_AD_B1_13_LPSPI3_PCS0 }, \
|
|
{ IOMUXC_GPIO_AD_B1_14_LPSPI3_SDO }, { IOMUXC_GPIO_AD_B1_15_LPSPI3_SDI },
|
|
|
|
#define DMA_REQ_SRC_RX { 0, kDmaRequestMuxLPSPI1Rx, kDmaRequestMuxLPSPI2Rx, \
|
|
kDmaRequestMuxLPSPI3Rx, kDmaRequestMuxLPSPI4Rx }
|
|
|
|
#define DMA_REQ_SRC_TX { 0, kDmaRequestMuxLPSPI1Tx, kDmaRequestMuxLPSPI2Tx, \
|
|
kDmaRequestMuxLPSPI3Tx, kDmaRequestMuxLPSPI4Tx }
|
|
|
|
// Define mapping hardware I2C # to logical I2C #
|
|
// SDA/SCL HW-I2C Logical I2C
|
|
// D14/D15 LPI2C4 -> 0
|
|
// A4/A5 LPI2C1 -> 1
|
|
// D0/D1 LPI2C2 -> 2
|
|
|
|
#define MICROPY_HW_I2C_INDEX { 4, 1, 2 }
|
|
|
|
#define IOMUX_TABLE_I2C \
|
|
{ IOMUXC_GPIO_AD_B1_14_LPI2C1_SCL }, { IOMUXC_GPIO_AD_B1_15_LPI2C1_SDA }, \
|
|
{ IOMUXC_GPIO_AD_B1_08_LPI2C2_SCL }, { IOMUXC_GPIO_AD_B1_09_LPI2C2_SDA }, \
|
|
{ 0 }, { 0 }, \
|
|
{ IOMUXC_GPIO_SD_B1_02_LPI2C4_SCL }, { IOMUXC_GPIO_SD_B1_03_LPI2C4_SDA },
|
|
|
|
#define USDHC_DUMMY_PIN NULL, 0
|
|
#define MICROPY_USDHC1 \
|
|
{ \
|
|
.cmd = {GPIO_SD_B0_02_USDHC1_CMD}, \
|
|
.clk = { GPIO_SD_B0_03_USDHC1_CLK }, \
|
|
.cd_b = { GPIO_SD_B0_06_USDHC1_CD_B }, \
|
|
.data0 = { GPIO_SD_B0_04_USDHC1_DATA0 }, \
|
|
.data1 = { GPIO_SD_B0_05_USDHC1_DATA1 }, \
|
|
.data2 = { GPIO_SD_B0_00_USDHC1_DATA2 }, \
|
|
.data3 = { GPIO_SD_B0_01_USDHC1_DATA3 }, \
|
|
}
|
|
|
|
// --- SEMC --- //
|
|
#define MIMXRT_IOMUXC_SEMC_DATA00 IOMUXC_GPIO_EMC_00_SEMC_DATA00
|
|
#define MIMXRT_IOMUXC_SEMC_DATA01 IOMUXC_GPIO_EMC_01_SEMC_DATA01
|
|
#define MIMXRT_IOMUXC_SEMC_DATA02 IOMUXC_GPIO_EMC_02_SEMC_DATA02
|
|
#define MIMXRT_IOMUXC_SEMC_DATA03 IOMUXC_GPIO_EMC_03_SEMC_DATA03
|
|
#define MIMXRT_IOMUXC_SEMC_DATA04 IOMUXC_GPIO_EMC_04_SEMC_DATA04
|
|
#define MIMXRT_IOMUXC_SEMC_DATA05 IOMUXC_GPIO_EMC_05_SEMC_DATA05
|
|
#define MIMXRT_IOMUXC_SEMC_DATA06 IOMUXC_GPIO_EMC_06_SEMC_DATA06
|
|
#define MIMXRT_IOMUXC_SEMC_DATA07 IOMUXC_GPIO_EMC_07_SEMC_DATA07
|
|
#define MIMXRT_IOMUXC_SEMC_DATA08 IOMUXC_GPIO_EMC_32_SEMC_DATA08
|
|
#define MIMXRT_IOMUXC_SEMC_DATA09 IOMUXC_GPIO_EMC_33_SEMC_DATA09
|
|
#define MIMXRT_IOMUXC_SEMC_DATA10 IOMUXC_GPIO_EMC_34_SEMC_DATA10
|
|
#define MIMXRT_IOMUXC_SEMC_DATA11 IOMUXC_GPIO_EMC_35_SEMC_DATA11
|
|
#define MIMXRT_IOMUXC_SEMC_DATA12 IOMUXC_GPIO_EMC_36_SEMC_DATA12
|
|
#define MIMXRT_IOMUXC_SEMC_DATA13 IOMUXC_GPIO_EMC_37_SEMC_DATA13
|
|
#define MIMXRT_IOMUXC_SEMC_DATA14 IOMUXC_GPIO_EMC_38_SEMC_DATA14
|
|
#define MIMXRT_IOMUXC_SEMC_DATA15 IOMUXC_GPIO_EMC_39_SEMC_DATA15
|
|
|
|
#define MIMXRT_IOMUXC_SEMC_ADDR00 IOMUXC_GPIO_EMC_16_SEMC_ADDR00
|
|
#define MIMXRT_IOMUXC_SEMC_ADDR01 IOMUXC_GPIO_EMC_17_SEMC_ADDR01
|
|
#define MIMXRT_IOMUXC_SEMC_ADDR02 IOMUXC_GPIO_EMC_18_SEMC_ADDR02
|
|
#define MIMXRT_IOMUXC_SEMC_ADDR03 IOMUXC_GPIO_EMC_19_SEMC_ADDR03
|
|
#define MIMXRT_IOMUXC_SEMC_ADDR04 IOMUXC_GPIO_EMC_20_SEMC_ADDR04
|
|
#define MIMXRT_IOMUXC_SEMC_ADDR05 IOMUXC_GPIO_EMC_21_SEMC_ADDR05
|
|
#define MIMXRT_IOMUXC_SEMC_ADDR06 IOMUXC_GPIO_EMC_22_SEMC_ADDR06
|
|
#define MIMXRT_IOMUXC_SEMC_ADDR07 IOMUXC_GPIO_EMC_23_SEMC_ADDR07
|
|
#define MIMXRT_IOMUXC_SEMC_ADDR08 IOMUXC_GPIO_EMC_24_SEMC_ADDR08
|
|
#define MIMXRT_IOMUXC_SEMC_ADDR09 IOMUXC_GPIO_EMC_25_SEMC_ADDR09
|
|
#define MIMXRT_IOMUXC_SEMC_ADDR10 IOMUXC_GPIO_EMC_15_SEMC_ADDR10
|
|
#define MIMXRT_IOMUXC_SEMC_ADDR11 IOMUXC_GPIO_EMC_26_SEMC_ADDR11
|
|
#define MIMXRT_IOMUXC_SEMC_ADDR12 IOMUXC_GPIO_EMC_27_SEMC_ADDR12
|
|
|
|
#define MIMXRT_IOMUXC_SEMC_BA0 IOMUXC_GPIO_EMC_13_SEMC_BA0
|
|
#define MIMXRT_IOMUXC_SEMC_BA1 IOMUXC_GPIO_EMC_14_SEMC_BA1
|
|
#define MIMXRT_IOMUXC_SEMC_CAS IOMUXC_GPIO_EMC_10_SEMC_CAS
|
|
#define MIMXRT_IOMUXC_SEMC_CKE IOMUXC_GPIO_EMC_29_SEMC_CKE
|
|
#define MIMXRT_IOMUXC_SEMC_CLK IOMUXC_GPIO_EMC_30_SEMC_CLK
|
|
#define MIMXRT_IOMUXC_SEMC_DM00 IOMUXC_GPIO_EMC_08_SEMC_DM00
|
|
#define MIMXRT_IOMUXC_SEMC_DM01 IOMUXC_GPIO_EMC_31_SEMC_DM01
|
|
#define MIMXRT_IOMUXC_SEMC_DQS IOMUXC_GPIO_EMC_28_SEMC_DQS
|
|
#define MIMXRT_IOMUXC_SEMC_RAS IOMUXC_GPIO_EMC_11_SEMC_RAS
|
|
#define MIMXRT_IOMUXC_SEMC_WE IOMUXC_GPIO_EMC_09_SEMC_WE
|
|
|
|
#define MIMXRT_IOMUXC_SEMC_CS0 IOMUXC_GPIO_EMC_12_SEMC_CS0
|
|
|
|
// Network definitions
|
|
// Transceiver Phy Address
|
|
#define ENET_PHY_ADDRESS (2)
|
|
#define ENET_PHY_OPS phyksz8081_ops
|
|
|
|
// Etherner PIN definitions
|
|
#define ENET_RESET_PIN pin_GPIO_AD_B0_04
|
|
#define ENET_INT_PIN pin_GPIO_AD_B1_06
|
|
|
|
#define IOMUX_TABLE_ENET \
|
|
{ IOMUXC_GPIO_AD_B0_08_ENET_REF_CLK1, 1, 0xB0E9u }, \
|
|
{ IOMUXC_GPIO_AD_B0_09_ENET_RDATA01, 0, 0xB0E9u }, \
|
|
{ IOMUXC_GPIO_AD_B0_10_ENET_RDATA00, 0, 0xB0E9u }, \
|
|
{ IOMUXC_GPIO_AD_B0_11_ENET_RX_EN, 0, 0xB0E9u }, \
|
|
{ IOMUXC_GPIO_AD_B0_12_ENET_RX_ER, 0, 0xB0E9u }, \
|
|
{ IOMUXC_GPIO_AD_B0_13_ENET_TX_EN, 0, 0xB0E9u }, \
|
|
{ IOMUXC_GPIO_AD_B0_14_ENET_TDATA00, 0, 0xB0E9u }, \
|
|
{ IOMUXC_GPIO_AD_B0_15_ENET_TDATA01, 0, 0xB0E9u }, \
|
|
{ IOMUXC_GPIO_EMC_40_ENET_MDIO, 0, 0xB0E9u }, \
|
|
{ IOMUXC_GPIO_EMC_41_ENET_MDC, 0, 0xB0E9u },
|