94 lines
2.8 KiB
ReStructuredText
94 lines
2.8 KiB
ReStructuredText
.. currentmodule:: network
|
|
.. _network.LAN:
|
|
|
|
class LAN -- control an Ethernet module
|
|
=======================================
|
|
|
|
This class allows you to control the Ethernet interface. The PHY hardware type is board-specific.
|
|
|
|
Example usage::
|
|
|
|
import network
|
|
nic = network.LAN(0)
|
|
print(nic.ifconfig())
|
|
|
|
# now use socket as usual
|
|
...
|
|
|
|
|
|
Constructors
|
|
------------
|
|
|
|
.. class:: LAN(id, *, phy_type=<board_default>, phy_addr=<board_default>, phy_clock=<board_default>)
|
|
|
|
Create a LAN driver object, initialise the LAN module using the given
|
|
PHY driver name, and return the LAN object.
|
|
|
|
Arguments are:
|
|
|
|
- *id* is the number of the Ethernet port, either 0 or 1.
|
|
- *phy_type* is the name of the PHY driver. For most board the on-board PHY has to be used and
|
|
is the default. Suitable values are port specific.
|
|
- *phy_addr* specifies the address of the PHY interface. As with *phy_type*, the hardwired value has
|
|
to be used for most boards and that value is the default.
|
|
- *phy_clock* specifies, whether the data clock is provided by the Ethernet controller or the PYH interface.
|
|
The default value is the one that matches the board. If set to ``True``, the clock is driven by the
|
|
Ethernet controller, otherwise by the PHY interface.
|
|
|
|
For example, with the Seeed Arch Mix board you can use::
|
|
|
|
nic = LAN(0, phy_type=LAN.PHY_LAN8720, phy_addr=2, phy_clock=False)
|
|
|
|
Methods
|
|
-------
|
|
|
|
.. method:: LAN.active([state])
|
|
|
|
With a parameter, it sets the interface active if *state* is true, otherwise it
|
|
sets it inactive.
|
|
Without a parameter, it returns the state.
|
|
|
|
.. method:: LAN.isconnected()
|
|
|
|
Returns ``True`` if the physical Ethernet link is connected and up.
|
|
Returns ``False`` otherwise.
|
|
|
|
.. method:: LAN.status()
|
|
|
|
Returns the LAN status.
|
|
|
|
.. method:: LAN.ifconfig([(ip, subnet, gateway, dns)])
|
|
|
|
Get/set IP address, subnet mask, gateway and DNS.
|
|
|
|
When called with no arguments, this method returns a 4-tuple with the above information.
|
|
|
|
To set the above values, pass a 4-tuple with the required information. For example::
|
|
|
|
nic.ifconfig(('192.168.0.4', '255.255.255.0', '192.168.0.1', '8.8.8.8'))
|
|
|
|
.. method:: LAN.config(config_parameters)
|
|
|
|
Sets or gets parameters of the LAN interface. The only parameter that can be
|
|
retrieved is the MAC address, using::
|
|
|
|
mac = LAN.config("mac")
|
|
|
|
The parameters that can be set are:
|
|
|
|
- ``trace=n`` sets trace levels; suitable values are:
|
|
|
|
- 2: trace TX
|
|
- 4: trace RX
|
|
- 8: full trace
|
|
|
|
- ``low_power=bool`` sets or clears low power mode, valid values being ``False``
|
|
or ``True``.
|
|
|
|
|
|
Specific LAN class implementations
|
|
----------------------------------
|
|
|
|
On the mimxrt port, suitable values for the *phy_type* constructor argument are:
|
|
``PHY_KSZ8081``, ``PHY_DP83825``, ``PHY_DP83848``, ``PHY_LAN8720``, ``PHY_RTL8211F``.
|