circuitpython

boards

stmhal: Unify naming of HW config; make SD detect configurable.

2014-03-30 12:30:35 +01:00

cmsis

Initial checkin with STM HAL

2014-03-11 23:55:41 -07:00

fatfs

Initial checkin with STM HAL

2014-03-11 23:55:41 -07:00

hal

stmhal - More systick cleanup. Fix HAL_Delay

2014-03-13 16:17:01 -07:00

usbdev

stmhal: Implement selector for USB device mode; improve boot up.

2014-03-30 00:00:15 +00:00

usbhost

Initial checkin with STM HAL

2014-03-11 23:55:41 -07:00

accel.c

py: Remove old "run time" functions that were 1 liners.

2014-03-31 16:28:13 +01:00

accel.h

stmhal: Shuffle around some init functions in main().

2014-03-25 23:33:47 +00:00

adc.c

py: Change nlr_jump to nlr_raise, to aid in debugging.

2014-04-05 18:32:08 +01:00

adc.h

stmhal: Make pyb.ADC the ADC class (not a function).

2014-03-24 19:27:13 +00:00

autoflash

stmhal: autoflash now enters serial comms after flashing.

2014-04-05 17:16:00 +01:00

dac.c

py: Change nlr_jump to nlr_raise, to aid in debugging.

2014-04-05 18:32:08 +01:00

dac.h

stmhal: Add DAC driver.

2014-03-24 15:15:33 +00:00

diskio.c

stmhal: Unify naming of HW config; make SD detect configurable.

2014-03-30 12:30:35 +01:00

diskio.h

stmhal: Add fatfs support, working with flash and SD card.

2014-03-17 14:04:19 +00:00

exti.c

py: Change nlr_jump to nlr_raise, to aid in debugging.

2014-04-05 18:32:08 +01:00

exti.h

stmhal - add pin mapping, gpio, exti, usrsw

2014-03-14 23:41:28 -07:00

ffconf.h

stmhal: Add fatfs support, working with flash and SD card.

2014-03-17 14:04:19 +00:00

file.c

py: Replace stream_p with *stream_p in mp_obj_type_t.

2014-04-05 23:02:23 +01:00

file.h

stmhal: Add fatfs support, working with flash and SD card.

2014-03-17 14:04:19 +00:00

flash.c

stmhal: Add flash write support and flash storage driver.

2014-03-17 13:31:35 +00:00

flash.h

stmhal: Add flash write support and flash storage driver.

2014-03-17 13:31:35 +00:00

font_petme128_8x8.h

stmhal: Add LCD driver.

2014-03-19 13:11:59 +00:00

gccollect.c

REPl working on UART6 with STMHAL

2014-03-12 18:15:55 -07:00

gccollect.h

REPl working on UART6 with STMHAL

2014-03-12 18:15:55 -07:00

gchelper.s

REPl working on UART6 with STMHAL

2014-03-12 18:15:55 -07:00

gpio.c

Rename rt_* to mp_*.

2014-03-30 13:35:08 +01:00

gpio.h

stmhal - add pin mapping, gpio, exti, usrsw

2014-03-14 23:41:28 -07:00

help.c

py: Change module globals from mp_map_t* to mp_obj_dict_t*.

2014-04-05 21:53:54 +01:00

i2c.c

py: Change nlr_jump to nlr_raise, to aid in debugging.

2014-04-05 18:32:08 +01:00

i2c.h

stmhal: Add I2C support; change accel driver to use new I2C.

2014-03-25 23:26:14 +00:00

import.c

stmhal: Add accelerometer driver; fix bug with LFN.

2014-03-20 23:33:30 +00:00

input.c

py: Change nlr_jump to nlr_raise, to aid in debugging.

2014-04-05 18:32:08 +01:00

lcd.c

Rename rt_* to mp_*.

2014-03-30 13:35:08 +01:00

lcd.h

stmhal: Add LCD driver.

2014-03-19 13:11:59 +00:00

led.c

py: Change nlr_jump to nlr_raise, to aid in debugging.

2014-04-05 18:32:08 +01:00

led.h

stmhal: Make Led, Servo and Accel their class, not a function.

2014-03-24 11:48:39 +00:00

lexerfatfs.c

stmhal: Add fatfs support, working with flash and SD card.

2014-03-17 14:04:19 +00:00

lexerfatfs.h

REPl working on UART6 with STMHAL

2014-03-12 18:15:55 -07:00

main.c

stmhal: On soft reset, if in raw REPL mode, don't run main.py.

2014-04-03 22:44:08 +01:00

Makefile

stmhal: Add timer module; move servo PWM from TIM2 to TIM5.

2014-04-02 15:09:36 +01:00

malloc0.c

Improve GC finalisation code; add option to disable it.

2014-04-05 20:35:48 +01:00

math.c

stmhal: Add powf, logf, log2f, log10f.

2014-04-03 22:11:28 +01:00

modos.c

py: Change module globals from mp_map_t* to mp_obj_dict_t*.

2014-04-05 21:53:54 +01:00

modos.h

Proper support for registering builtin modules in ROM.

2014-03-25 14:18:18 +00:00

modpyb.c

py: Change module globals from mp_map_t* to mp_obj_dict_t*.

2014-04-05 21:53:54 +01:00

modpyb.h

Proper support for registering builtin modules in ROM.

2014-03-25 14:18:18 +00:00

modtime.c

py: Change module globals from mp_map_t* to mp_obj_dict_t*.

2014-04-05 21:53:54 +01:00

modtime.h

Proper support for registering builtin modules in ROM.

2014-03-25 14:18:18 +00:00

mpconfigport.h

py: Make globals and locals proper dictionary objects.

2014-04-05 22:36:42 +01:00

pendsv.c

stmhal: Get USB enumerating a CDC device.

2014-03-14 00:30:37 +00:00

pendsv.h

stmhal: Get USB enumerating a CDC device.

2014-03-14 00:30:37 +00:00

pin_map.c

py: Change nlr_jump to nlr_raise, to aid in debugging.

2014-04-05 18:32:08 +01:00

pin_named_pins.c

stmhal - add pin mapping, gpio, exti, usrsw

2014-03-14 23:41:28 -07:00

pin.c

REPl working on UART6 with STMHAL

2014-03-12 18:15:55 -07:00

pin.h

stmhal - fixed up adc stuff

2014-03-24 11:16:35 -07:00

printf.c

Enhance str.format support

2014-04-01 01:17:33 -07:00

pybcdc.inf

stmhal: Add Windows .inf file for USB CDC device.

2014-03-29 17:43:02 +00:00

pybstdio.c

stmhal: Factor out stdio and readline to separate files.

2014-03-29 14:20:05 +00:00

pybstdio.h

stmhal: Factor out stdio and readline to separate files.

2014-03-29 14:20:05 +00:00

pyexec.c

py: Add option to compiler to specify default code emitter.

2014-04-06 11:48:15 +01:00

pyexec.h

stmhal: Improve REPL CTRL commands.

2014-03-24 12:23:37 +00:00

qstrdefsport.h

py: Replace stream_p with *stream_p in mp_obj_type_t.

2014-04-05 23:02:23 +01:00

readline.c

stmhal: Add more escape seqs; add debugging output for escape seq.

2014-04-05 11:45:59 +01:00

readline.h

stmhal: Factor out stdio and readline to separate files.

2014-03-29 14:20:05 +00:00

rng.c

stmhal: Add os module with a few basic functions.

2014-03-22 14:56:32 +00:00

rng.h

stmhal: Add os module with a few basic functions.

2014-03-22 14:56:32 +00:00

rtc.c

stmhal: Get RTC working.

2014-03-15 12:54:48 +00:00

rtc.h

stmhal: Get RTC working.

2014-03-15 12:54:48 +00:00

sdcard.c

Merge map.h into obj.h.

2014-03-30 13:54:02 +01:00

sdcard.h

stmhal: Add fatfs support, working with flash and SD card.

2014-03-17 14:04:19 +00:00

servo.c

py: Change nlr_jump to nlr_raise, to aid in debugging.

2014-04-05 18:32:08 +01:00

servo.h

stmhal: Add timer module; move servo PWM from TIM2 to TIM5.

2014-04-02 15:09:36 +01:00

startup_stm32f40xx.s

Initial checkin with STM HAL

2014-03-11 23:55:41 -07:00

std.h

Initial checkin with STM HAL

2014-03-11 23:55:41 -07:00

stm32f4xx_hal_msp.c

stmhal: Add timer module; move servo PWM from TIM2 to TIM5.

2014-04-02 15:09:36 +01:00

stm32f4xx_it.c

stmhal: Add timer module; move servo PWM from TIM2 to TIM5.

2014-04-02 15:09:36 +01:00

stm32f4xx_it.h

stmhal: Get USB enumerating a CDC device.

2014-03-14 00:30:37 +00:00

stm32f405.ld

Initial checkin with STM HAL

2014-03-11 23:55:41 -07:00

storage.c

stmhal: Add flash write support and flash storage driver.

2014-03-17 13:31:35 +00:00

storage.h

stmhal: Add flash write support and flash storage driver.

2014-03-17 13:31:35 +00:00

string0.c

REPl working on UART6 with STMHAL

2014-03-12 18:15:55 -07:00

system_stm32f4xx.c

stmhal: Disable redundant SystemCoreClockUpdate function.

2014-03-15 14:45:51 +00:00

systick.c

stmhal - More systick cleanup. Fix HAL_Delay

2014-03-13 16:17:01 -07:00

systick.h

stmhal - More systick cleanup. Fix HAL_Delay

2014-03-13 16:17:01 -07:00

timer.c

py: Change nlr_jump to nlr_raise, to aid in debugging.

2014-04-05 18:32:08 +01:00

timer.h

stmhal: Add timer module; move servo PWM from TIM2 to TIM5.

2014-04-02 15:09:36 +01:00

usart.c

py: Change nlr_jump to nlr_raise, to aid in debugging.

2014-04-05 18:32:08 +01:00

usart.h

stmhal: Change Usart creation function to class make_new.

2014-03-25 23:40:54 +00:00

usb.c

stmhal: Unify naming of HW config; make SD detect configurable.

2014-03-30 12:30:35 +01:00

usb.h

stmhal: Add home/end cursor support in readline.

2014-04-03 23:30:24 +01:00

usbd_cdc_interface.c

stmhal: Implement selector for USB device mode; improve boot up.

2014-03-30 00:00:15 +00:00

usbd_cdc_interface.h

stmhal: Add timer module; move servo PWM from TIM2 to TIM5.

2014-04-02 15:09:36 +01:00

usbd_conf.c

stmhal: USB CDC and MSC device work together.

2014-03-22 12:32:54 +00:00

usbd_conf.h

stmhal: Tidy up USB device configuration. Make it use less RAM.

2014-03-22 12:46:23 +00:00

usbd_desc_cdc_msc.c

stmhal: USB CDC and MSC device work together.

2014-03-22 12:32:54 +00:00

usbd_desc.h

stmhal: Add support for USB MSC device.

2014-03-21 23:32:01 +00:00

usbd_msc_storage.c

stmhal: Unify naming of HW config; make SD detect configurable.

2014-03-30 12:30:35 +01:00

usbd_msc_storage.h

stmhal: Add support for USB MSC device.

2014-03-21 23:32:01 +00:00

usrsw.c

Rename rt_* to mp_*.

2014-03-30 13:35:08 +01:00

usrsw.h

stmhal: Implement selector for USB device mode; improve boot up.

2014-03-30 00:00:15 +00:00