circuitpython/cc3200/hal/i2s.h
danicampora 8785645a95 cc3200: Add cc3200 port of MicroPython.
The port currently implements support for GPIO, RTC, ExtInt and the WiFi
subsystem. A small file system is available in the serial flash. A
bootloader which makes OTA updates possible, is also part of this initial
implementation.
2015-02-06 22:10:11 +00:00

203 lines
8.0 KiB
C

//*****************************************************************************
//
// i2s.h
//
// Defines and Macros for the I2S.
//
// Copyright (C) 2014 Texas Instruments Incorporated - http://www.ti.com/
//
//
// Redistribution and use in source and binary forms, with or without
// modification, are permitted provided that the following conditions
// are met:
//
// Redistributions of source code must retain the above copyright
// notice, this list of conditions and the following disclaimer.
//
// Redistributions in binary form must reproduce the above copyright
// notice, this list of conditions and the following disclaimer in the
// documentation and/or other materials provided with the
// distribution.
//
// Neither the name of Texas Instruments Incorporated nor the names of
// its contributors may be used to endorse or promote products derived
// from this software without specific prior written permission.
//
// THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
// "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
// LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR
// A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT
// OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
// SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT
// LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
// DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY
// THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
// (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
// OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
//
//*****************************************************************************
#ifndef __I2S_H__
#define __I2S_H__
//*****************************************************************************
//
// If building with a C++ compiler, make all of the definitions in this header
// have a C binding.
//
//*****************************************************************************
#ifdef __cplusplus
extern "C"
{
#endif
//*****************************************************************************
//
// I2S DMA ports.
//
//*****************************************************************************
#define I2S_TX_DMA_PORT 0x4401E200
#define I2S_RX_DMA_PORT 0x4401E280
//*****************************************************************************
//
// Values that can be passed to I2SConfigSetExpClk() as the ulConfig parameter.
//
//*****************************************************************************
#define I2S_SLOT_SIZE_24 0x00B200B4
#define I2S_SLOT_SIZE_16 0x00700074
#define I2S_PORT_CPU 0x00000008
#define I2S_PORT_DMA 0x00000000
//*****************************************************************************
//
// Values that can be passed as ulDataLine parameter.
//
//*****************************************************************************
#define I2S_DATA_LINE_0 0x00000001
#define I2S_DATA_LINE_1 0x00000002
//*****************************************************************************
//
// Values that can be passed to I2SSerializerConfig() as the ulSerMode
// parameter.
//
//*****************************************************************************
#define I2S_SER_MODE_TX 0x00000001
#define I2S_SER_MODE_RX 0x00000002
#define I2S_SER_MODE_DISABLE 0x00000000
//*****************************************************************************
//
// Values that can be passed to I2SSerializerConfig() as the ulInActState
// parameter.
//
//*****************************************************************************
#define I2S_INACT_TRI_STATE 0x00000000
#define I2S_INACT_LOW_LEVEL 0x00000008
#define I2S_INACT_HIGH_LEVEL 0x0000000C
//*****************************************************************************
//
// Values that can be passed to I2SIntEnable() and I2SIntDisable() as the
// ulIntFlags parameter.
//
//*****************************************************************************
#define I2S_INT_XUNDRN 0x00000001
#define I2S_INT_XSYNCERR 0x00000002
#define I2S_INT_XLAST 0x00000010
#define I2S_INT_XDATA 0x00000020
#define I2S_INT_XSTAFRM 0x00000080
#define I2S_INT_XDMA 0x80000000
#define I2S_INT_ROVRN 0x00010000
#define I2S_INT_RSYNCERR 0x00020000
#define I2S_INT_RLAST 0x00100000
#define I2S_INT_RDATA 0x00200000
#define I2S_INT_RSTAFRM 0x00800000
#define I2S_INT_RDMA 0x40000000
//*****************************************************************************
//
// Values that can be passed to I2SIntClear() as the
// ulIntFlags parameter and returned from I2SIntStatus().
//
//*****************************************************************************
#define I2S_STS_XERR 0x00000100
#define I2S_STS_XDMAERR 0x00000080
#define I2S_STS_XSTAFRM 0x00000040
#define I2S_STS_XDATA 0x00000020
#define I2S_STS_XLAST 0x00000010
#define I2S_STS_XSYNCERR 0x00000002
#define I2S_STS_XUNDRN 0x00000001
#define I2S_STS_XDMA 0x80000000
#define I2S_STS_RERR 0x01000000
#define I2S_STS_RDMAERR 0x00800000
#define I2S_STS_RSTAFRM 0x00400000
#define I2S_STS_RDATA 0x00200000
#define I2S_STS_RLAST 0x00100000
#define I2S_STS_RSYNCERR 0x00020000
#define I2S_STS_ROVERN 0x00010000
#define I2S_STS_RDMA 0x40000000
//*****************************************************************************
//
// Values that can be passed to I2SEnable() as the ulMode parameter.
//
//*****************************************************************************
#define I2S_MODE_TX_ONLY 0x00000001
#define I2S_MODE_TX_RX_SYNC 0x00000003
//*****************************************************************************
//
// API Function prototypes
//
//*****************************************************************************
extern void I2SEnable(unsigned long ulBase, unsigned long ulMode);
extern void I2SDisable(unsigned long ulBase);
extern void I2SDataPut(unsigned long ulBase, unsigned long ulDataLine,
unsigned long ulData);
extern long I2SDataPutNonBlocking(unsigned long ulBase,
unsigned long ulDataLine, unsigned long ulData);
extern void I2SDataGet(unsigned long ulBase, unsigned long ulDataLine,
unsigned long *pulData);
extern long I2SDataGetNonBlocking(unsigned long ulBase,
unsigned long ulDataLine, unsigned long *pulData);
extern void I2SConfigSetExpClk(unsigned long ulBase, unsigned long ulI2SClk,
unsigned long ulBitClk, unsigned long ulConfig);
extern void I2STxFIFOEnable(unsigned long ulBase, unsigned long ulTxLevel,
unsigned long ulWordsPerTransfer);
extern void I2STxFIFODisable(unsigned long ulBase);
extern void I2SRxFIFOEnable(unsigned long ulBase, unsigned long ulRxLevel,
unsigned long ulWordsPerTransfer);
extern void I2SRxFIFODisable(unsigned long ulBase);
extern unsigned long I2STxFIFOStatusGet(unsigned long ulBase);
extern unsigned long I2SRxFIFOStatusGet(unsigned long ulBase);
extern void I2SSerializerConfig(unsigned long ulBase, unsigned long ulDataLine,
unsigned long ulSerMode, unsigned long ulInActState);
extern void I2SIntEnable(unsigned long ulBase, unsigned long ulIntFlags);
extern void I2SIntDisable(unsigned long ulBase, unsigned long ulIntFlags);
extern unsigned long I2SIntStatus(unsigned long ulBase);
extern void I2SIntClear(unsigned long ulBase, unsigned long ulIntFlags);
extern void I2SIntRegister(unsigned long ulBase, void (*pfnHandler)(void));
extern void I2SIntUnregister(unsigned long ulBase);
//*****************************************************************************
//
// Mark the end of the C bindings section for C++ compilers.
//
//*****************************************************************************
#ifdef __cplusplus
}
#endif
#endif //__I2S_H__