d02f089058
Pin defines are: - For Pico define board pins and the default LED pin (WL_GPIO25). - For Pico-W define board pins, external pins and the default LED pin (WL_GPIO0). - For the Nano-RP2040, define board pins, external pins and the default LED pin (GPIO25) - For all other boards, the pins.csv defines the LED pin (if any) for backwards compatibility with code that assumes there's always an LED pin. |
||
|---|---|---|
| .. | ||
| modules | ||
| board.json | ||
| deploy.md | ||
| manifest.py | ||
| mpconfigboard.cmake | ||
| mpconfigboard.h | ||
| pins.csv | ||
| README.md | ||
| weactstudio_2mb.h | ||
| weactstudio_4mb.h | ||
| weactstudio_8mb.h | ||
| weactstudio_16mb.h | ||
| weactstudio_common.h | ||
WeAct Studio RP2040
The WeAct Studio RP2040 Board is based on the Raspberry Pi RP2040 and can be purchased with 2/4/8/16 MiB of flash.
These boards are available from a number of resellers and often have the name "Pico Board RP2040". WeAct maintain the WeActStudio.RP2040CoreBoard repository containing information on the board.
Build notes
Builds can be configured with the BOARD_VARIANT parameter. Valid variants
can be displayed with the query-variant target. An example:
> cd ports/rp2
> make BOARD=WEACTSTUDIO query-variants
VARIANTS: flash_2mb flash_4mb flash_8mb flash_16mb
> make BOARD=WEACTSTUDIO BOARD_VARIANT=flash_8mb submodules all # Build the 8 MiB variant
flash_16mb is the default if BOARD_VARIANT is not supplied.
Board-specific modules
The board module contains definitions for the onboard LED and user button.
Example:
> import board
> board.led.toggle() # Toggles the state of the on-board LED
> board.key.value() # Returns 0 or 1 corresponding to the state of the user key