circuitpython/boards at d7e2ac4a6ae8d11f108a526c7ad356154d0d2a43 - circuitpython - Gitea

djsundog/circuitpython

History

Damien George 47550ef2cd stm32: For MCUs that have PLLSAI allow to set SYSCLK at 2MHz increments.

MCUs that have a PLLSAI can use it to generate a 48MHz clock for USB, SDIO
and RNG peripherals.  In such cases the SYSCLK is not restricted to values
that allow the system PLL to generate 48MHz, but can be any frequency.
This patch allows such configurability for F7 MCUs, allowing the SYSCLK to
be set in 2MHz increments via machine.freq().  PLLSAI will only be enabled
if needed, and consumes about 1mA extra.  This fine grained control of
frequency is useful to get accurate SPI baudrates, for example.

2018-09-11 16:42:57 +10:00

..

stm32/Makefile: Allow a board to config either 1 or 2 firmware sections.

2018-03-27 21:24:15 +11:00

stm32/boards: Update pins.csv to include USB pins where needed.

2018-05-01 17:38:51 +10:00

stm32/Makefile: Allow a board to config either 1 or 2 firmware sections.

2018-03-27 21:24:15 +11:00

stm32/Makefile: Allow a board to config either 1 or 2 firmware sections.

2018-03-27 21:24:15 +11:00

stm32/Makefile: Allow a board to config either 1 or 2 firmware sections.

2018-03-27 21:24:15 +11:00

NETDUINO_PLUS_2

stm32/boards: Update pins.csv to include USB pins where needed.

2018-05-01 17:38:51 +10:00

stm32/boards/NUCLEO_F091RC: Fix TICK_INT_PRIORITY so it is highest prio.

2018-06-20 12:24:18 +10:00

stm32/Makefile: Allow a board to config either 1 or 2 firmware sections.

2018-03-27 21:24:15 +11:00

stm32/Makefile: Allow a board to config either 1 or 2 firmware sections.

2018-03-27 21:24:15 +11:00

stm32/can: Allow CAN pins to be configured per board.

2018-04-11 16:35:24 +10:00

stm32/Makefile: Allow a board to config either 1 or 2 firmware sections.

2018-03-27 21:24:15 +11:00

stm32/boards: Update pins.csv to include USB pins where needed.

2018-05-01 17:38:51 +10:00

stm32/boards: Ensure USB OTG power is off for NUCLEO_F767ZI.

2018-05-30 09:51:19 +10:00

stm32/boards: Ensure USB OTG power is off for NUCLEO_F767ZI.

2018-05-30 09:51:19 +10:00

stm32/Makefile: Allow a board to config either 1 or 2 firmware sections.

2018-03-27 21:24:15 +11:00

stm32/boards: Update pins.csv to include USB pins where needed.

2018-05-01 17:38:51 +10:00

stm32/Makefile: Allow a board to config either 1 or 2 firmware sections.

2018-03-27 21:24:15 +11:00

stm32/boards: Update pins.csv to include USB pins where needed.

2018-05-01 17:38:51 +10:00

stm32/can: Allow CAN pins to be configured per board.

2018-04-11 16:35:24 +10:00

stm32/can: Allow CAN pins to be configured per board.

2018-04-11 16:35:24 +10:00

stm32/can: Allow CAN pins to be configured per board.

2018-04-11 16:35:24 +10:00

stm32/boards: Update pins.csv to include USB pins where needed.

2018-05-01 17:38:51 +10:00

stm32/boards/STM32F7DISC: Enable onboard SDRAM.

2018-08-14 16:04:10 +10:00

stm32/boards: Update pins.csv to include USB pins where needed.

2018-05-01 17:38:51 +10:00

stm32/boards/STM32F429DISC: Add burst len and autorefresh to SDRAM cfg.

2018-08-14 16:03:13 +10:00

stm32/can: Allow CAN pins to be configured per board.

2018-04-11 16:35:24 +10:00

stm32/can: Allow CAN pins to be configured per board.

2018-04-11 16:35:24 +10:00

stm32/boards/STM32L476DISC: Enable external RTC xtal to get RTC working.

2018-09-11 15:23:19 +10:00

stm32/boards: Add config files for new board, STM32L496GDISC.

2018-05-18 22:39:49 +10:00

common_basic.ld

stm32/boards: Add common_basic.ld for a board to have a single section.

2018-03-27 21:29:45 +11:00

common_bl.ld

stm32/boards: Add common_bl.ld for boards that need a bootloader.

2018-03-27 21:30:45 +11:00

common_ifs.ld

stm32/boards: Allow boards to have finer control over the linker script.

2018-03-27 21:17:48 +11:00

make-pins.py

stm32: Add method for statically configuring pin alternate function.

2018-07-20 14:03:21 +10:00

openocd_stm32f4.cfg

ports: Make new ports/ sub-directory and move all ports there.

2017-09-06 13:40:51 +10:00

openocd_stm32f7.cfg

ports: Make new ports/ sub-directory and move all ports there.

2017-09-06 13:40:51 +10:00

openocd_stm32l4.cfg

ports: Make new ports/ sub-directory and move all ports there.

2017-09-06 13:40:51 +10:00

pllvalues.py

stm32: For MCUs that have PLLSAI allow to set SYSCLK at 2MHz increments.

2018-09-11 16:42:57 +10:00

startup_stm32f0.s

stm32/boards: Add startup_stm32f0.s for STM32F0 MCUs.

2018-05-28 21:49:49 +10:00

startup_stm32f4.s

stm32: Enable UART7/8 on F4 series that have these peripherals.

2018-05-16 11:55:07 +10:00

startup_stm32f7.s

stm32/boards: Add startup_stm32f7.s for F7 series specific startup.

2018-03-09 15:13:56 +11:00

startup_stm32h7.s

stm32/boards: Add startup_stm32h7.s for H7 series specific startup.

2018-03-09 15:13:13 +11:00

startup_stm32l4.s

stm32: Add support for STM32L496 MCU.

2018-05-18 22:37:30 +10:00

stm32f4xx_prefix.c

stm32/pin: In pin AF object, remove union of periph ptr types.

2018-04-11 16:14:58 +10:00

stm32f091_af.csv

stm32/boards/stm32f091_af.csv: Split labels that are multiple funcs.

2018-06-18 13:05:24 +10:00

stm32f091xc.ld

stm32/boards: Add alt-func CSV list and linker script for STM32F091.

2018-05-28 21:49:49 +10:00

stm32f401_af.csv

stm32/boards: Split combined alt-func labels and fix some other errors.

2018-05-29 21:37:49 +10:00

stm32f401xd.ld

stm32/boards: Allow boards to have finer control over the linker script.

2018-03-27 21:17:48 +11:00

stm32f401xe.ld

stm32/boards: Allow boards to have finer control over the linker script.

2018-03-27 21:17:48 +11:00

stm32f405_af.csv

stm32/boards/*_af.csv: Make consistent use of JTMS, JTCK, SWDIO, SWCLK.

2017-12-01 14:51:36 +11:00

stm32f405.ld

stm32/boards: Allow boards to have finer control over the linker script.

2018-03-27 21:17:48 +11:00

stm32f411_af.csv

stm32/boards: Split combined alt-func labels and fix some other errors.

2018-05-29 21:37:49 +10:00

stm32f411.ld

stm32/boards: Allow boards to have finer control over the linker script.

2018-03-27 21:17:48 +11:00

stm32f429_af.csv

stm32/boards/*_af.csv: Make consistent use of JTMS, JTCK, SWDIO, SWCLK.

2017-12-01 14:51:36 +11:00

stm32f429.ld

stm32/boards: Allow boards to have finer control over the linker script.

2018-03-27 21:17:48 +11:00

stm32f439_af.csv

stm32: Enable UART7/8 on F4 series that have these peripherals.

2018-05-16 11:55:07 +10:00

stm32f439.ld

stm32/boards: Allow boards to have finer control over the linker script.

2018-03-27 21:17:48 +11:00

stm32f722_af.csv

stm32/boards: Add .ld and af.csv files for STM32F722.

2018-06-22 15:39:10 +10:00

stm32f722.ld

stm32/boards: Add .ld and af.csv files for STM32F722.

2018-06-22 15:39:10 +10:00

stm32f746_af.csv

stm32/boards/stm32f746_af.csv: Fix typos in AF table.

2017-11-20 14:19:12 +11:00

stm32f746.ld

stm32/boards: Allow boards to have finer control over the linker script.

2018-03-27 21:17:48 +11:00

stm32f767_af.csv

stm32/boards/stm32f767_af.csv: Add ADC column to pin capability list.

2018-03-07 18:40:06 +11:00

stm32f767.ld

stm32/boards/stm32f767.ld: Add definition of FLASH_APP.

2018-03-27 21:35:03 +11:00

stm32f769.ld

stm32/boards: Allow boards to have finer control over the linker script.

2018-03-27 21:17:48 +11:00

stm32h743_af.csv

stm32/boards: Split combined alt-func labels and fix some other errors.

2018-05-29 21:37:49 +10:00

stm32h743.ld

stm32/boards/stm32h743.ld: Remove include of common.ld.

2018-03-28 13:20:07 +11:00

stm32l476_af.csv

stm32/boards: Split combined alt-func labels and fix some other errors.

2018-05-29 21:37:49 +10:00

stm32l476xe.ld

stm32/flashbdev: Fix bug with L4 block cache, dereferencing block size.

2018-07-19 12:15:34 +10:00

stm32l476xg.ld

stm32/flashbdev: Fix bug with L4 block cache, dereferencing block size.

2018-07-19 12:15:34 +10:00

stm32l496_af.csv

stm32/boards: Split combined alt-func labels and fix some other errors.

2018-05-29 21:37:49 +10:00

stm32l496xg.ld

stm32/flashbdev: Fix bug with L4 block cache, dereferencing block size.

2018-07-19 12:15:34 +10:00