652 lines
18 KiB
Makefile
652 lines
18 KiB
Makefile
# Select the board to build for: if not given on the command line,
|
|
# then default to PYBV10.
|
|
BOARD ?= PYBV10
|
|
|
|
# If the build directory is not given, make it reflect the board name.
|
|
BUILD ?= build-$(BOARD)
|
|
|
|
BOARD_DIR ?= boards/$(BOARD)
|
|
ifeq ($(wildcard $(BOARD_DIR)/.),)
|
|
$(error Invalid BOARD specified: $(BOARD_DIR))
|
|
endif
|
|
|
|
include ../../py/mkenv.mk
|
|
-include mpconfigport.mk
|
|
include $(BOARD_DIR)/mpconfigboard.mk
|
|
|
|
# qstr definitions (must come before including py.mk)
|
|
QSTR_DEFS = qstrdefsport.h $(BUILD)/pins_qstr.h $(BUILD)/modstm_qstr.h
|
|
QSTR_GLOBAL_DEPENDENCIES = mpconfigboard_common.h $(BOARD_DIR)/mpconfigboard.h
|
|
|
|
# File containing description of content to be frozen into firmware.
|
|
FROZEN_MANIFEST ?= boards/manifest.py
|
|
|
|
# include py core make definitions
|
|
include $(TOP)/py/py.mk
|
|
|
|
GIT_SUBMODULES = lib/lwip lib/mbedtls lib/mynewt-nimble lib/stm32lib
|
|
|
|
MCU_SERIES_UPPER = $(shell echo $(MCU_SERIES) | tr '[:lower:]' '[:upper:]')
|
|
CMSIS_MCU_LOWER = $(shell echo $(CMSIS_MCU) | tr '[:upper:]' '[:lower:]')
|
|
|
|
LD_DIR=boards
|
|
CMSIS_DIR=$(TOP)/lib/stm32lib/CMSIS/STM32$(MCU_SERIES_UPPER)xx/Include
|
|
HAL_DIR=lib/stm32lib/STM32$(MCU_SERIES_UPPER)xx_HAL_Driver
|
|
USBDEV_DIR=usbdev
|
|
#USBHOST_DIR=usbhost
|
|
FATFS_DIR=lib/oofatfs
|
|
DFU=$(TOP)/tools/dfu.py
|
|
# may need to prefix dfu-util with sudo
|
|
USE_PYDFU ?= 1
|
|
PYDFU ?= $(TOP)/tools/pydfu.py
|
|
DFU_UTIL ?= dfu-util
|
|
DEVICE=0483:df11
|
|
STFLASH ?= st-flash
|
|
OPENOCD ?= openocd
|
|
OPENOCD_CONFIG ?= boards/openocd_stm32f4.cfg
|
|
STARTUP_FILE ?= lib/stm32lib/CMSIS/STM32$(MCU_SERIES_UPPER)xx/Source/Templates/gcc/startup_$(CMSIS_MCU_LOWER).o
|
|
SYSTEM_FILE ?= lib/stm32lib/CMSIS/STM32$(MCU_SERIES_UPPER)xx/Source/Templates/system_stm32$(MCU_SERIES)xx.o
|
|
|
|
# Select the cross compile prefix
|
|
CROSS_COMPILE ?= arm-none-eabi-
|
|
|
|
INC += -I.
|
|
INC += -I$(TOP)
|
|
INC += -I$(BUILD)
|
|
INC += -I$(TOP)/lib/cmsis/inc
|
|
INC += -I$(CMSIS_DIR)/
|
|
INC += -I$(TOP)/$(HAL_DIR)/Inc
|
|
INC += -I$(USBDEV_DIR)/core/inc -I$(USBDEV_DIR)/class/inc
|
|
#INC += -I$(USBHOST_DIR)
|
|
INC += -Ilwip_inc
|
|
|
|
# Basic Cortex-M flags
|
|
CFLAGS_CORTEX_M = -mthumb
|
|
|
|
# Select hardware floating-point support
|
|
ifeq ($(CMSIS_MCU),$(filter $(CMSIS_MCU),STM32F765xx STM32F767xx STM32F769xx STM32H743xx))
|
|
CFLAGS_CORTEX_M += -mfpu=fpv5-d16 -mfloat-abi=hard
|
|
else
|
|
ifeq ($(MCU_SERIES),$(filter $(MCU_SERIES),f0 l0))
|
|
CFLAGS_CORTEX_M += -msoft-float
|
|
else
|
|
CFLAGS_CORTEX_M += -mfpu=fpv4-sp-d16 -mfloat-abi=hard
|
|
endif
|
|
endif
|
|
|
|
# Options for particular MCU series
|
|
CFLAGS_MCU_f0 = $(CFLAGS_CORTEX_M) -mtune=cortex-m0 -mcpu=cortex-m0
|
|
CFLAGS_MCU_f4 = $(CFLAGS_CORTEX_M) -mtune=cortex-m4 -mcpu=cortex-m4
|
|
CFLAGS_MCU_f7 = $(CFLAGS_CORTEX_M) -mtune=cortex-m7 -mcpu=cortex-m7
|
|
CFLAGS_MCU_l0 = $(CFLAGS_CORTEX_M) -mtune=cortex-m0plus -mcpu=cortex-m0plus
|
|
CFLAGS_MCU_l4 = $(CFLAGS_CORTEX_M) -mtune=cortex-m4 -mcpu=cortex-m4
|
|
CFLAGS_MCU_h7 = $(CFLAGS_CORTEX_M) -mtune=cortex-m7 -mcpu=cortex-m7
|
|
CFLAGS_MCU_wb = $(CFLAGS_CORTEX_M) -mtune=cortex-m4 -mcpu=cortex-m4
|
|
|
|
CFLAGS = $(INC) -Wall -Wpointer-arith -Werror -std=gnu99 -nostdlib $(CFLAGS_MOD) $(CFLAGS_EXTRA)
|
|
CFLAGS += -D$(CMSIS_MCU)
|
|
CFLAGS += $(CFLAGS_MCU_$(MCU_SERIES))
|
|
CFLAGS += $(COPT)
|
|
CFLAGS += -I$(BOARD_DIR)
|
|
CFLAGS += -DSTM32_HAL_H='<stm32$(MCU_SERIES)xx_hal.h>'
|
|
CFLAGS += -DMICROPY_HW_VTOR=$(TEXT0_ADDR)
|
|
|
|
ifeq ($(MICROPY_FLOAT_IMPL),double)
|
|
CFLAGS += -DMICROPY_FLOAT_IMPL=MICROPY_FLOAT_IMPL_DOUBLE
|
|
else
|
|
ifeq ($(MICROPY_FLOAT_IMPL),none)
|
|
CFLAGS += -DMICROPY_FLOAT_IMPL=MICROPY_FLOAT_IMPL_NONE
|
|
else
|
|
CFLAGS += -DMICROPY_FLOAT_IMPL=MICROPY_FLOAT_IMPL_FLOAT
|
|
CFLAGS += -fsingle-precision-constant -Wdouble-promotion
|
|
endif
|
|
endif
|
|
|
|
LDFLAGS = -nostdlib -L $(LD_DIR) $(addprefix -T,$(LD_FILES)) -Map=$(@:.elf=.map) --cref
|
|
LDFLAGS += --defsym=_estack_reserve=8
|
|
LIBS = $(shell $(CC) $(CFLAGS) -print-libgcc-file-name)
|
|
|
|
# Remove uncalled code from the final image.
|
|
CFLAGS += -fdata-sections -ffunction-sections
|
|
LDFLAGS += --gc-sections
|
|
|
|
# Debugging/Optimization
|
|
ifeq ($(DEBUG), 1)
|
|
CFLAGS += -g -DPENDSV_DEBUG
|
|
COPT = -O0
|
|
else
|
|
COPT += -Os -DNDEBUG
|
|
endif
|
|
|
|
# Options for mpy-cross
|
|
MPY_CROSS_FLAGS += -march=armv7m
|
|
|
|
SRC_LIB = $(addprefix lib/,\
|
|
libc/string0.c \
|
|
oofatfs/ff.c \
|
|
oofatfs/ffunicode.c \
|
|
mp-readline/readline.c \
|
|
netutils/netutils.c \
|
|
netutils/trace.c \
|
|
netutils/dhcpserver.c \
|
|
timeutils/timeutils.c \
|
|
utils/pyexec.c \
|
|
utils/interrupt_char.c \
|
|
utils/sys_stdio_mphal.c \
|
|
utils/mpirq.c \
|
|
)
|
|
|
|
ifeq ($(MICROPY_FLOAT_IMPL),double)
|
|
SRC_LIBM = $(addprefix lib/libm_dbl/,\
|
|
__cos.c \
|
|
__expo2.c \
|
|
__fpclassify.c \
|
|
__rem_pio2.c \
|
|
__rem_pio2_large.c \
|
|
__signbit.c \
|
|
__sin.c \
|
|
__tan.c \
|
|
acos.c \
|
|
acosh.c \
|
|
asin.c \
|
|
asinh.c \
|
|
atan.c \
|
|
atan2.c \
|
|
atanh.c \
|
|
ceil.c \
|
|
cos.c \
|
|
cosh.c \
|
|
copysign.c \
|
|
erf.c \
|
|
exp.c \
|
|
expm1.c \
|
|
floor.c \
|
|
fmod.c \
|
|
frexp.c \
|
|
ldexp.c \
|
|
lgamma.c \
|
|
log.c \
|
|
log10.c \
|
|
log1p.c \
|
|
modf.c \
|
|
nearbyint.c \
|
|
pow.c \
|
|
rint.c \
|
|
scalbn.c \
|
|
sin.c \
|
|
sinh.c \
|
|
tan.c \
|
|
tanh.c \
|
|
tgamma.c \
|
|
trunc.c \
|
|
)
|
|
ifeq ($(MCU_SERIES),$(filter $(MCU_SERIES),f7 h7))
|
|
SRC_LIBM += lib/libm_dbl/thumb_vfp_sqrt.c
|
|
else
|
|
SRC_LIBM += lib/libm_dbl/sqrt.c
|
|
endif
|
|
else
|
|
SRC_LIBM = $(addprefix lib/libm/,\
|
|
math.c \
|
|
acoshf.c \
|
|
asinfacosf.c \
|
|
asinhf.c \
|
|
atan2f.c \
|
|
atanf.c \
|
|
atanhf.c \
|
|
ef_rem_pio2.c \
|
|
erf_lgamma.c \
|
|
fmodf.c \
|
|
kf_cos.c \
|
|
kf_rem_pio2.c \
|
|
kf_sin.c \
|
|
kf_tan.c \
|
|
log1pf.c \
|
|
nearbyintf.c \
|
|
sf_cos.c \
|
|
sf_erf.c \
|
|
sf_frexp.c \
|
|
sf_ldexp.c \
|
|
sf_modf.c \
|
|
sf_sin.c \
|
|
sf_tan.c \
|
|
wf_lgamma.c \
|
|
wf_tgamma.c \
|
|
)
|
|
ifeq ($(MCU_SERIES),$(filter $(MCU_SERIES),f0 l0))
|
|
SRC_LIBM += lib/libm/ef_sqrt.c
|
|
else
|
|
SRC_LIBM += lib/libm/thumb_vfp_sqrtf.c
|
|
endif
|
|
endif
|
|
|
|
EXTMOD_SRC_C = $(addprefix extmod/,\
|
|
modonewire.c \
|
|
)
|
|
|
|
DRIVERS_SRC_C = $(addprefix drivers/,\
|
|
bus/softspi.c \
|
|
bus/softqspi.c \
|
|
memory/spiflash.c \
|
|
dht/dht.c \
|
|
)
|
|
|
|
SRC_C = \
|
|
main.c \
|
|
stm32_it.c \
|
|
usbd_conf.c \
|
|
usbd_desc.c \
|
|
usbd_cdc_interface.c \
|
|
usbd_hid_interface.c \
|
|
usbd_msc_interface.c \
|
|
mphalport.c \
|
|
mpthreadport.c \
|
|
irq.c \
|
|
pendsv.c \
|
|
systick.c \
|
|
powerctrl.c \
|
|
powerctrlboot.c \
|
|
pybthread.c \
|
|
factoryreset.c \
|
|
timer.c \
|
|
led.c \
|
|
pin.c \
|
|
pin_defs_stm32.c \
|
|
pin_named_pins.c \
|
|
bufhelper.c \
|
|
dma.c \
|
|
i2c.c \
|
|
pyb_i2c.c \
|
|
spi.c \
|
|
pyb_spi.c \
|
|
qspi.c \
|
|
uart.c \
|
|
can.c \
|
|
fdcan.c \
|
|
pyb_can.c \
|
|
usb.c \
|
|
wdt.c \
|
|
eth.c \
|
|
gccollect.c \
|
|
help.c \
|
|
machine_adc.c \
|
|
machine_i2c.c \
|
|
machine_spi.c \
|
|
machine_uart.c \
|
|
modmachine.c \
|
|
modpyb.c \
|
|
modstm.c \
|
|
moduos.c \
|
|
modutime.c \
|
|
modusocket.c \
|
|
network_lan.c \
|
|
modnetwork.c \
|
|
extint.c \
|
|
usrsw.c \
|
|
rng.c \
|
|
rtc.c \
|
|
flash.c \
|
|
flashbdev.c \
|
|
spibdev.c \
|
|
storage.c \
|
|
sdcard.c \
|
|
sdram.c \
|
|
fatfs_port.c \
|
|
lcd.c \
|
|
accel.c \
|
|
servo.c \
|
|
dac.c \
|
|
adc.c \
|
|
$(wildcard $(BOARD_DIR)/*.c)
|
|
|
|
SRC_O = \
|
|
$(STARTUP_FILE) \
|
|
$(SYSTEM_FILE)
|
|
|
|
ifeq ($(MCU_SERIES),f0)
|
|
SRC_O += \
|
|
resethandler_m0.o \
|
|
lib/utils/gchelper_m0.o
|
|
else
|
|
ifeq ($(MCU_SERIES),l0)
|
|
CSUPEROPT = -Os # save some code space
|
|
SRC_O += \
|
|
resethandler_m0.o \
|
|
lib/utils/gchelper_m0.o
|
|
else
|
|
SRC_O += \
|
|
system_stm32.o \
|
|
resethandler.o \
|
|
lib/utils/gchelper_m3.o
|
|
endif
|
|
endif
|
|
|
|
SRC_HAL = $(addprefix $(HAL_DIR)/Src/stm32$(MCU_SERIES)xx_,\
|
|
hal.c \
|
|
hal_adc.c \
|
|
hal_adc_ex.c \
|
|
hal_cortex.c \
|
|
hal_dma.c \
|
|
hal_flash.c \
|
|
hal_flash_ex.c \
|
|
hal_gpio.c \
|
|
hal_i2c.c \
|
|
hal_pcd.c \
|
|
hal_pcd_ex.c \
|
|
hal_pwr.c \
|
|
hal_pwr_ex.c \
|
|
hal_rcc.c \
|
|
hal_rcc_ex.c \
|
|
hal_rtc.c \
|
|
hal_rtc_ex.c \
|
|
hal_spi.c \
|
|
hal_tim.c \
|
|
hal_tim_ex.c \
|
|
hal_uart.c \
|
|
)
|
|
|
|
ifeq ($(MCU_SERIES),$(filter $(MCU_SERIES),f4 f7 h7 l0 l4 wb))
|
|
SRC_HAL += $(addprefix $(HAL_DIR)/Src/stm32$(MCU_SERIES)xx_,\
|
|
ll_usb.c \
|
|
)
|
|
endif
|
|
|
|
ifeq ($(MCU_SERIES),$(filter $(MCU_SERIES),f4 f7 h7 l4))
|
|
SRC_HAL += $(addprefix $(HAL_DIR)/Src/stm32$(MCU_SERIES)xx_,\
|
|
hal_sd.c \
|
|
ll_sdmmc.c \
|
|
ll_fmc.c \
|
|
)
|
|
endif
|
|
|
|
ifeq ($(MCU_SERIES),$(filter $(MCU_SERIES),f4 f7 h7))
|
|
SRC_HAL += $(addprefix $(HAL_DIR)/Src/stm32$(MCU_SERIES)xx_,\
|
|
hal_mmc.c \
|
|
hal_sdram.c \
|
|
hal_dma_ex.c \
|
|
hal_dcmi.c \
|
|
)
|
|
endif
|
|
|
|
ifeq ($(CMSIS_MCU),$(filter $(CMSIS_MCU),STM32H743xx))
|
|
SRC_HAL += $(addprefix $(HAL_DIR)/Src/stm32$(MCU_SERIES)xx_, hal_fdcan.c)
|
|
else
|
|
ifeq ($(MCU_SERIES),$(filter $(MCU_SERIES),f0 f4 f7 h7 l4))
|
|
SRC_HAL += $(addprefix $(HAL_DIR)/Src/stm32$(MCU_SERIES)xx_, hal_can.c)
|
|
endif
|
|
endif
|
|
|
|
SRC_USBDEV = $(addprefix $(USBDEV_DIR)/,\
|
|
core/src/usbd_core.c \
|
|
core/src/usbd_ctlreq.c \
|
|
core/src/usbd_ioreq.c \
|
|
class/src/usbd_cdc_msc_hid.c \
|
|
class/src/usbd_msc_bot.c \
|
|
class/src/usbd_msc_scsi.c \
|
|
)
|
|
|
|
ifeq ($(MICROPY_PY_BLUETOOTH),1)
|
|
CFLAGS_MOD += -DMICROPY_PY_BLUETOOTH=1
|
|
CFLAGS_MOD += -DMICROPY_PY_BLUETOOTH_ENABLE_CENTRAL_MODE=1
|
|
CFLAGS_MOD += -DMICROPY_PY_BLUETOOTH_GATTS_ON_READ_CALLBACK=1
|
|
endif
|
|
|
|
ifeq ($(MICROPY_PY_NETWORK_CYW43),1)
|
|
CFLAGS_MOD += -DMICROPY_PY_NETWORK_CYW43=1
|
|
SRC_C += sdio.c
|
|
EXTMOD_SRC_C += extmod/network_cyw43.c
|
|
DRIVERS_SRC_C += drivers/cyw43/cyw43_ctrl.c drivers/cyw43/cyw43_lwip.c
|
|
LIBS += $(TOP)/drivers/cyw43/libcyw43.a
|
|
endif
|
|
|
|
ifneq ($(MICROPY_PY_WIZNET5K),0)
|
|
WIZNET5K_DIR=drivers/wiznet5k
|
|
INC += -I$(TOP)/$(WIZNET5K_DIR)
|
|
CFLAGS_MOD += -DMICROPY_PY_WIZNET5K=$(MICROPY_PY_WIZNET5K) -D_WIZCHIP_=$(MICROPY_PY_WIZNET5K)
|
|
SRC_MOD += network_wiznet5k.c modnwwiznet5k.c
|
|
SRC_MOD += $(addprefix $(WIZNET5K_DIR)/,\
|
|
ethernet/w$(MICROPY_PY_WIZNET5K)/w$(MICROPY_PY_WIZNET5K).c \
|
|
ethernet/wizchip_conf.c \
|
|
ethernet/socket.c \
|
|
internet/dns/dns.c \
|
|
)
|
|
endif
|
|
|
|
# for CC3000 module
|
|
ifeq ($(MICROPY_PY_CC3K),1)
|
|
CC3000_DIR=drivers/cc3000
|
|
INC += -I$(TOP)/$(CC3000_DIR)/inc
|
|
CFLAGS_MOD += -DMICROPY_PY_CC3K=1
|
|
SRC_MOD += modnwcc3k.c
|
|
SRC_MOD += $(addprefix $(CC3000_DIR)/src/,\
|
|
cc3000_common.c \
|
|
evnt_handler.c \
|
|
hci.c \
|
|
netapp.c \
|
|
nvmem.c \
|
|
security.c \
|
|
socket.c \
|
|
wlan.c \
|
|
ccspi.c \
|
|
inet_ntop.c \
|
|
inet_pton.c \
|
|
patch.c \
|
|
patch_prog.c \
|
|
)
|
|
endif
|
|
|
|
ifeq ($(MICROPY_SSL_MBEDTLS),1)
|
|
CFLAGS_MOD += -DMBEDTLS_CONFIG_FILE='"mbedtls/mbedtls_config.h"'
|
|
SRC_MOD += mbedtls/mbedtls_port.c
|
|
endif
|
|
|
|
ifeq ($(MICROPY_BLUETOOTH_NIMBLE),1)
|
|
include $(TOP)/extmod/nimble/nimble.mk
|
|
SRC_C += nimble.c
|
|
SRC_C += nimble_hci_uart.c
|
|
EXTMOD_SRC_C += extmod/modbluetooth_nimble.c
|
|
ifeq ($(MICROPY_PY_NETWORK_CYW43),1)
|
|
DRIVERS_SRC_C += drivers/cyw43/cywbt.c
|
|
endif
|
|
endif
|
|
|
|
OBJ =
|
|
OBJ += $(PY_O)
|
|
OBJ += $(addprefix $(BUILD)/, $(SRC_LIB:.c=.o))
|
|
OBJ += $(addprefix $(BUILD)/, $(SRC_LIBM:.c=.o))
|
|
OBJ += $(addprefix $(BUILD)/, $(EXTMOD_SRC_C:.c=.o))
|
|
OBJ += $(addprefix $(BUILD)/, $(DRIVERS_SRC_C:.c=.o))
|
|
OBJ += $(addprefix $(BUILD)/, $(SRC_C:.c=.o))
|
|
OBJ += $(addprefix $(BUILD)/, $(SRC_O))
|
|
OBJ += $(addprefix $(BUILD)/, $(SRC_HAL:.c=.o))
|
|
OBJ += $(addprefix $(BUILD)/, $(SRC_USBDEV:.c=.o))
|
|
OBJ += $(addprefix $(BUILD)/, $(SRC_MOD:.c=.o))
|
|
OBJ += $(BUILD)/pins_$(BOARD).o
|
|
|
|
# This file contains performance critical functions so turn up the optimisation
|
|
# level. It doesn't add much to the code size and improves performance a bit.
|
|
# Don't use -O3 with this file because gcc tries to optimise memset in terms of itself.
|
|
$(BUILD)/lib/libc/string0.o: COPT += -O2
|
|
|
|
# We put several files into the first 16K section with the ISRs.
|
|
# If we compile these using -O0 then it won't fit. So if you really want these
|
|
# to be compiled with -O0, then edit boards/common.ld (in the .isr_vector section)
|
|
# and comment out the following lines.
|
|
$(BUILD)/$(FATFS_DIR)/ff.o: COPT += -Os
|
|
$(filter $(PY_BUILD)/../extmod/vfs_fat_%.o, $(PY_O)): COPT += -Os
|
|
$(PY_BUILD)/formatfloat.o: COPT += -Os
|
|
$(PY_BUILD)/parsenum.o: COPT += -Os
|
|
$(PY_BUILD)/mpprint.o: COPT += -Os
|
|
|
|
all: $(TOP)/lib/stm32lib/README.md $(BUILD)/firmware.dfu $(BUILD)/firmware.hex
|
|
|
|
# For convenience, automatically fetch required submodules if they don't exist
|
|
$(TOP)/lib/stm32lib/README.md:
|
|
$(ECHO) "stm32lib submodule not found, fetching it now..."
|
|
(cd $(TOP) && git submodule update --init lib/stm32lib)
|
|
|
|
ifneq ($(FROZEN_MANIFEST)$(FROZEN_DIR),)
|
|
# To use frozen source modules, put your .py files in a subdirectory (eg scripts/)
|
|
# and then invoke make with FROZEN_DIR=scripts (be sure to build from scratch).
|
|
CFLAGS += -DMICROPY_MODULE_FROZEN_STR
|
|
endif
|
|
|
|
ifneq ($(FROZEN_MANIFEST)$(FROZEN_MPY_DIR),)
|
|
# To use frozen bytecode, put your .py files in a subdirectory (eg frozen/) and
|
|
# then invoke make with FROZEN_MPY_DIR=frozen (be sure to build from scratch).
|
|
CFLAGS += -DMICROPY_QSTR_EXTRA_POOL=mp_qstr_frozen_const_pool
|
|
CFLAGS += -DMICROPY_MODULE_FROZEN_MPY
|
|
endif
|
|
|
|
.PHONY: deploy
|
|
|
|
deploy: $(BUILD)/firmware.dfu
|
|
$(ECHO) "Writing $< to the board"
|
|
ifeq ($(USE_PYDFU),1)
|
|
$(Q)$(PYTHON) $(PYDFU) -u $<
|
|
else
|
|
$(Q)$(DFU_UTIL) -a 0 -d $(DEVICE) -D $<
|
|
endif
|
|
|
|
# A board should specify TEXT0_ADDR if to use a different location than the
|
|
# default for the firmware memory location. A board can also optionally define
|
|
# TEXT1_ADDR to split the firmware into two sections; see below for details.
|
|
TEXT0_ADDR ?= 0x08000000
|
|
|
|
ifeq ($(TEXT1_ADDR),)
|
|
# No TEXT1_ADDR given so put all firmware at TEXT0_ADDR location
|
|
|
|
TEXT0_SECTIONS ?= .isr_vector .text .data
|
|
|
|
deploy-stlink: $(BUILD)/firmware.dfu
|
|
$(ECHO) "Writing $(BUILD)/firmware.bin to the board via ST-LINK"
|
|
$(Q)$(STFLASH) write $(BUILD)/firmware.bin $(TEXT0_ADDR)
|
|
|
|
deploy-openocd: $(BUILD)/firmware.dfu
|
|
$(ECHO) "Writing $(BUILD)/firmware.bin to the board via ST-LINK using OpenOCD"
|
|
$(Q)$(OPENOCD) -f $(OPENOCD_CONFIG) -c "stm_flash $(BUILD)/firmware.bin $(TEXT0_ADDR)"
|
|
|
|
$(BUILD)/firmware.dfu: $(BUILD)/firmware.elf
|
|
$(ECHO) "Create $@"
|
|
$(Q)$(OBJCOPY) -O binary $(addprefix -j ,$(TEXT0_SECTIONS)) $^ $(BUILD)/firmware.bin
|
|
$(Q)$(PYTHON) $(DFU) -b $(TEXT0_ADDR):$(BUILD)/firmware.bin $@
|
|
|
|
else
|
|
# TEXT0_ADDR and TEXT1_ADDR are specified so split firmware between these locations
|
|
|
|
TEXT0_SECTIONS ?= .isr_vector
|
|
TEXT1_SECTIONS ?= .text .data
|
|
|
|
deploy-stlink: $(BUILD)/firmware.dfu
|
|
$(ECHO) "Writing $(BUILD)/firmware0.bin to the board via ST-LINK"
|
|
$(Q)$(STFLASH) write $(BUILD)/firmware0.bin $(TEXT0_ADDR)
|
|
$(ECHO) "Writing $(BUILD)/firmware1.bin to the board via ST-LINK"
|
|
$(Q)$(STFLASH) --reset write $(BUILD)/firmware1.bin $(TEXT1_ADDR)
|
|
|
|
deploy-openocd: $(BUILD)/firmware.dfu
|
|
$(ECHO) "Writing $(BUILD)/firmware{0,1}.bin to the board via ST-LINK using OpenOCD"
|
|
$(Q)$(OPENOCD) -f $(OPENOCD_CONFIG) -c "stm_flash $(BUILD)/firmware0.bin $(TEXT0_ADDR) $(BUILD)/firmware1.bin $(TEXT1_ADDR)"
|
|
|
|
$(BUILD)/firmware.dfu: $(BUILD)/firmware.elf
|
|
$(ECHO) "GEN $@"
|
|
$(Q)$(OBJCOPY) -O binary $(addprefix -j ,$(TEXT0_SECTIONS)) $^ $(BUILD)/firmware0.bin
|
|
$(Q)$(OBJCOPY) -O binary $(addprefix -j ,$(TEXT1_SECTIONS)) $^ $(BUILD)/firmware1.bin
|
|
$(Q)$(PYTHON) $(DFU) -b $(TEXT0_ADDR):$(BUILD)/firmware0.bin -b $(TEXT1_ADDR):$(BUILD)/firmware1.bin $@
|
|
|
|
endif
|
|
|
|
$(BUILD)/firmware.hex: $(BUILD)/firmware.elf
|
|
$(ECHO) "GEN $@"
|
|
$(Q)$(OBJCOPY) -O ihex $< $@
|
|
|
|
$(BUILD)/firmware.elf: $(OBJ)
|
|
$(ECHO) "LINK $@"
|
|
$(Q)$(LD) $(LDFLAGS) -o $@ $^ $(LDFLAGS_MOD) $(LIBS)
|
|
$(Q)$(SIZE) $@
|
|
ifneq ($(TEXT0_ADDR),0x08000000)
|
|
$(ECHO) "INFO: this build requires mboot to be installed first"
|
|
endif
|
|
ifeq ($(TEXT1_ADDR),0x90000000)
|
|
$(ECHO) "INFO: this build places firmware in external QSPI flash"
|
|
endif
|
|
|
|
PLLVALUES = boards/pllvalues.py
|
|
MAKE_PINS = boards/make-pins.py
|
|
BOARD_PINS = $(BOARD_DIR)/pins.csv
|
|
PREFIX_FILE = boards/stm32f4xx_prefix.c
|
|
GEN_PINS_SRC = $(BUILD)/pins_$(BOARD).c
|
|
GEN_PINS_HDR = $(HEADER_BUILD)/pins.h
|
|
GEN_PINS_QSTR = $(BUILD)/pins_qstr.h
|
|
GEN_PINS_AF_CONST = $(HEADER_BUILD)/pins_af_const.h
|
|
GEN_PINS_AF_DEFS = $(HEADER_BUILD)/pins_af_defs.h
|
|
GEN_PINS_AF_PY = $(BUILD)/pins_af.py
|
|
|
|
INSERT_USB_IDS = $(TOP)/tools/insert-usb-ids.py
|
|
FILE2H = $(TOP)/tools/file2h.py
|
|
|
|
USB_IDS_FILE = usb.h
|
|
CDCINF_TEMPLATE = pybcdc.inf_template
|
|
GEN_CDCINF_FILE = $(HEADER_BUILD)/pybcdc.inf
|
|
GEN_CDCINF_HEADER = $(HEADER_BUILD)/pybcdc_inf.h
|
|
|
|
# List of sources for qstr extraction
|
|
SRC_QSTR += $(SRC_C) $(SRC_MOD) $(SRC_LIB) $(EXTMOD_SRC_C)
|
|
# Append any auto-generated sources that are needed by sources listed in
|
|
# SRC_QSTR
|
|
SRC_QSTR_AUTO_DEPS += $(GEN_CDCINF_HEADER)
|
|
|
|
# Making OBJ use an order-only depenedency on the generated pins.h file
|
|
# has the side effect of making the pins.h file before we actually compile
|
|
# any of the objects. The normal dependency generation will deal with the
|
|
# case when pins.h is modified. But when it doesn't exist, we don't know
|
|
# which source files might need it.
|
|
$(OBJ): | $(GEN_PINS_HDR)
|
|
|
|
# With conditional pins, we may need to regenerate qstrdefs.h when config
|
|
# options change.
|
|
$(HEADER_BUILD)/qstrdefs.generated.h: $(BOARD_DIR)/mpconfigboard.h
|
|
|
|
# main.c can't be even preprocessed without $(GEN_CDCINF_HEADER)
|
|
main.c: $(GEN_CDCINF_HEADER)
|
|
|
|
# Use a pattern rule here so that make will only call make-pins.py once to make
|
|
# both pins_$(BOARD).c and pins.h
|
|
$(BUILD)/%_$(BOARD).c $(HEADER_BUILD)/%.h $(HEADER_BUILD)/%_af_const.h $(HEADER_BUILD)/%_af_defs.h $(BUILD)/%_qstr.h: $(BOARD_DIR)/%.csv $(MAKE_PINS) $(AF_FILE) $(PREFIX_FILE) | $(HEADER_BUILD)
|
|
$(ECHO) "GEN $@"
|
|
$(Q)$(PYTHON) $(MAKE_PINS) --board $(BOARD_PINS) --af $(AF_FILE) \
|
|
--prefix $(PREFIX_FILE) --hdr $(GEN_PINS_HDR) --hdr-obj-decls \
|
|
--qstr $(GEN_PINS_QSTR) --af-const $(GEN_PINS_AF_CONST) \
|
|
--af-defs $(GEN_PINS_AF_DEFS) --af-defs-cmp-strings \
|
|
--af-py $(GEN_PINS_AF_PY) > $(GEN_PINS_SRC)
|
|
|
|
$(BUILD)/pins_$(BOARD).o: $(BUILD)/pins_$(BOARD).c
|
|
$(call compile_c)
|
|
|
|
GEN_PLLFREQTABLE_HDR = $(HEADER_BUILD)/pllfreqtable.h
|
|
GEN_STMCONST_HDR = $(HEADER_BUILD)/modstm_const.h
|
|
GEN_STMCONST_QSTR = $(BUILD)/modstm_qstr.h
|
|
GEN_STMCONST_MPZ = $(HEADER_BUILD)/modstm_mpz.h
|
|
CMSIS_MCU_HDR = $(CMSIS_DIR)/$(CMSIS_MCU_LOWER).h
|
|
|
|
modmachine.c: $(GEN_PLLFREQTABLE_HDR)
|
|
$(GEN_PLLFREQTABLE_HDR): $(PLLVALUES) | $(HEADER_BUILD)
|
|
$(ECHO) "GEN $@"
|
|
$(Q)$(PYTHON) $(PLLVALUES) -c $(if $(filter $(MCU_SERIES),f7),--relax-pll48,) file:$(BOARD_DIR)/stm32$(MCU_SERIES)xx_hal_conf.h > $@
|
|
|
|
$(BUILD)/modstm.o: $(GEN_STMCONST_HDR)
|
|
# Use a pattern rule here so that make will only call make-stmconst.py once to
|
|
# make both modstm_const.h and modstm_qstr.h
|
|
$(HEADER_BUILD)/%_const.h $(BUILD)/%_qstr.h: $(CMSIS_MCU_HDR) make-stmconst.py | $(HEADER_BUILD)
|
|
$(ECHO) "GEN stmconst $@"
|
|
$(Q)$(PYTHON) make-stmconst.py --qstr $(GEN_STMCONST_QSTR) --mpz $(GEN_STMCONST_MPZ) $(CMSIS_MCU_HDR) > $(GEN_STMCONST_HDR)
|
|
|
|
$(GEN_CDCINF_HEADER): $(GEN_CDCINF_FILE) $(FILE2H) | $(HEADER_BUILD)
|
|
$(ECHO) "GEN $@"
|
|
$(Q)$(PYTHON) $(FILE2H) $< > $@
|
|
|
|
$(GEN_CDCINF_FILE): $(CDCINF_TEMPLATE) $(INSERT_USB_IDS) $(USB_IDS_FILE) | $(HEADER_BUILD)
|
|
$(ECHO) "GEN $@"
|
|
$(Q)$(PYTHON) $(INSERT_USB_IDS) $(USB_IDS_FILE) $< > $@
|
|
|
|
include $(TOP)/py/mkrules.mk
|