d99b05282d
A big change. Micro Python objects are allocated as individual structs with the first element being a pointer to the type information (which is itself an object). This scheme follows CPython. Much more flexible, not necessarily slower, uses same heap memory, and can allocate objects statically. Also change name prefix, from py_ to mp_ (mp for Micro Python).
302 lines
9.9 KiB
C
302 lines
9.9 KiB
C
#include <string.h>
|
|
#include <stm32f4xx_gpio.h>
|
|
|
|
#include "nlr.h"
|
|
#include "misc.h"
|
|
#include "mpconfig.h"
|
|
#include "parse.h"
|
|
#include "compile.h"
|
|
#include "obj.h"
|
|
#include "runtime.h"
|
|
|
|
#include "systick.h"
|
|
#include "font_petme128_8x8.h"
|
|
#include "lcd.h"
|
|
|
|
#define PYB_LCD_PORT (GPIOA)
|
|
#define PYB_LCD_CS1_PIN (GPIO_Pin_0)
|
|
#define PYB_LCD_RST_PIN (GPIO_Pin_1)
|
|
#define PYB_LCD_A0_PIN (GPIO_Pin_2)
|
|
#define PYB_LCD_SCL_PIN (GPIO_Pin_3)
|
|
#define PYB_LCD_SI_PIN (GPIO_Pin_4)
|
|
|
|
#define LCD_INSTR (0)
|
|
#define LCD_DATA (1)
|
|
|
|
static void lcd_out(int instr_data, uint8_t i) {
|
|
sys_tick_delay_ms(0);
|
|
PYB_LCD_PORT->BSRRH = PYB_LCD_CS1_PIN; // CS=0; enable
|
|
if (instr_data == LCD_INSTR) {
|
|
PYB_LCD_PORT->BSRRH = PYB_LCD_A0_PIN; // A0=0; select instr reg
|
|
} else {
|
|
PYB_LCD_PORT->BSRRL = PYB_LCD_A0_PIN; // A0=1; select data reg
|
|
}
|
|
// send byte bigendian, latches on rising clock
|
|
for (uint32_t n = 0; n < 8; n++) {
|
|
sys_tick_delay_ms(0);
|
|
PYB_LCD_PORT->BSRRH = PYB_LCD_SCL_PIN; // SCL=0
|
|
if ((i & 0x80) == 0) {
|
|
PYB_LCD_PORT->BSRRH = PYB_LCD_SI_PIN; // SI=0
|
|
} else {
|
|
PYB_LCD_PORT->BSRRL = PYB_LCD_SI_PIN; // SI=1
|
|
}
|
|
i <<= 1;
|
|
sys_tick_delay_ms(0);
|
|
PYB_LCD_PORT->BSRRL = PYB_LCD_SCL_PIN; // SCL=1
|
|
}
|
|
PYB_LCD_PORT->BSRRL = PYB_LCD_CS1_PIN; // CS=1; disable
|
|
|
|
/*
|
|
in Python, native types:
|
|
CS1_PIN(const) = 0
|
|
n = int(0)
|
|
delay_ms(0)
|
|
PORT[word:BSRRH] = 1 << CS1_PIN
|
|
for n in range(0, 8):
|
|
delay_ms(0)
|
|
PORT[word:BSRRH] = 1 << SCL_PIN
|
|
if i & 0x80 == 0:
|
|
PORT[word:BSRRH] = 1 << SI_PIN
|
|
else:
|
|
PORT[word:BSRRL] = 1 << SI_PIN
|
|
i <<= 1
|
|
delay_ms(0)
|
|
PORT[word:BSRRL] = 1 << SCL_PIN
|
|
*/
|
|
}
|
|
|
|
/*
|
|
static void lcd_data_out(uint8_t i) {
|
|
delay_ms(0);
|
|
PYB_LCD_PORT->BSRRH = PYB_LCD_CS1_PIN; // CS=0; enable
|
|
PYB_LCD_PORT->BSRRL = PYB_LCD_A0_PIN; // A0=1; select data reg
|
|
// send byte bigendian, latches on rising clock
|
|
for (uint32_t n = 0; n < 8; n++) {
|
|
delay_ms(0);
|
|
PYB_LCD_PORT->BSRRH = PYB_LCD_SCL_PIN; // SCL=0
|
|
if ((i & 0x80) == 0) {
|
|
PYB_LCD_PORT->BSRRH = PYB_LCD_SI_PIN; // SI=0
|
|
} else {
|
|
PYB_LCD_PORT->BSRRL = PYB_LCD_SI_PIN; // SI=1
|
|
}
|
|
i <<= 1;
|
|
delay_ms(0);
|
|
PYB_LCD_PORT->BSRRL = PYB_LCD_SCL_PIN; // SCL=1
|
|
}
|
|
PYB_LCD_PORT->BSRRL = PYB_LCD_CS1_PIN; // CS=1; disable
|
|
}
|
|
*/
|
|
|
|
// writes 8 vertical pixels
|
|
// pos 0 is upper left, pos 1 is 8 pixels to right of that, pos 128 is 8 pixels below that
|
|
mp_obj_t lcd_draw_pixel_8(mp_obj_t mp_pos, mp_obj_t mp_val) {
|
|
int pos = mp_obj_get_int(mp_pos);
|
|
int val = mp_obj_get_int(mp_val);
|
|
int page = pos / 128;
|
|
int offset = pos - (page * 128);
|
|
lcd_out(LCD_INSTR, 0xb0 | page); // page address set
|
|
lcd_out(LCD_INSTR, 0x10 | ((offset >> 4) & 0x0f)); // column address set upper
|
|
lcd_out(LCD_INSTR, 0x00 | (offset & 0x0f)); // column address set lower
|
|
lcd_out(LCD_DATA, val); // write data
|
|
return mp_const_none;
|
|
}
|
|
|
|
#define LCD_BUF_W (16)
|
|
#define LCD_BUF_H (4)
|
|
|
|
char lcd_char_buffer[LCD_BUF_W * LCD_BUF_H];
|
|
int lcd_line;
|
|
int lcd_column;
|
|
int lcd_next_line;
|
|
|
|
#define LCD_PIX_BUF_SIZE (128 * 32 / 8)
|
|
byte lcd_pix_buf[LCD_PIX_BUF_SIZE];
|
|
byte lcd_pix_buf2[LCD_PIX_BUF_SIZE];
|
|
|
|
mp_obj_t lcd_pix_clear(void) {
|
|
memset(lcd_pix_buf, 0, LCD_PIX_BUF_SIZE);
|
|
memset(lcd_pix_buf2, 0, LCD_PIX_BUF_SIZE);
|
|
return mp_const_none;
|
|
}
|
|
|
|
mp_obj_t lcd_pix_get(mp_obj_t mp_x, mp_obj_t mp_y) {
|
|
int x = mp_obj_get_int(mp_x);
|
|
int y = mp_obj_get_int(mp_y);
|
|
if (0 <= x && x <= 127 && 0 <= y && y <= 31) {
|
|
uint byte_pos = x + 128 * ((uint)y >> 3);
|
|
if (lcd_pix_buf[byte_pos] & (1 << (y & 7))) {
|
|
return mp_obj_new_int(1);
|
|
}
|
|
}
|
|
return mp_obj_new_int(0);
|
|
}
|
|
|
|
mp_obj_t lcd_pix_set(mp_obj_t mp_x, mp_obj_t mp_y) {
|
|
int x = mp_obj_get_int(mp_x);
|
|
int y = mp_obj_get_int(mp_y);
|
|
if (0 <= x && x <= 127 && 0 <= y && y <= 31) {
|
|
uint byte_pos = x + 128 * ((uint)y >> 3);
|
|
lcd_pix_buf2[byte_pos] |= 1 << (y & 7);
|
|
}
|
|
return mp_const_none;
|
|
}
|
|
|
|
mp_obj_t lcd_pix_reset(mp_obj_t mp_x, mp_obj_t mp_y) {
|
|
int x = mp_obj_get_int(mp_x);
|
|
int y = mp_obj_get_int(mp_y);
|
|
if (0 <= x && x <= 127 && 0 <= y && y <= 31) {
|
|
uint byte_pos = x + 128 * ((uint)y >> 3);
|
|
lcd_pix_buf2[byte_pos] &= ~(1 << (y & 7));
|
|
}
|
|
return mp_const_none;
|
|
}
|
|
|
|
mp_obj_t lcd_pix_show(void) {
|
|
memcpy(lcd_pix_buf, lcd_pix_buf2, LCD_PIX_BUF_SIZE);
|
|
for (uint page = 0; page < 4; page++) {
|
|
lcd_out(LCD_INSTR, 0xb0 | page); // page address set
|
|
lcd_out(LCD_INSTR, 0x10); // column address set upper; 0
|
|
lcd_out(LCD_INSTR, 0x00); // column address set lower; 0
|
|
for (uint i = 0; i < 128; i++) {
|
|
lcd_out(LCD_DATA, lcd_pix_buf[i + 128 * page]);
|
|
}
|
|
}
|
|
return mp_const_none;
|
|
}
|
|
|
|
mp_obj_t lcd_print(mp_obj_t text) {
|
|
lcd_print_str(qstr_str(mp_obj_get_qstr(text)));
|
|
return mp_const_none;
|
|
}
|
|
|
|
void lcd_init(void) {
|
|
// set the outputs high
|
|
PYB_LCD_PORT->BSRRL = PYB_LCD_CS1_PIN;
|
|
PYB_LCD_PORT->BSRRL = PYB_LCD_RST_PIN;
|
|
PYB_LCD_PORT->BSRRL = PYB_LCD_A0_PIN;
|
|
PYB_LCD_PORT->BSRRL = PYB_LCD_SCL_PIN;
|
|
PYB_LCD_PORT->BSRRL = PYB_LCD_SI_PIN;
|
|
|
|
// make them push/pull outputs
|
|
GPIO_InitTypeDef GPIO_InitStructure;
|
|
GPIO_InitStructure.GPIO_Pin = PYB_LCD_CS1_PIN | PYB_LCD_RST_PIN | PYB_LCD_A0_PIN | PYB_LCD_SCL_PIN | PYB_LCD_SI_PIN;
|
|
GPIO_InitStructure.GPIO_Mode = GPIO_Mode_OUT;
|
|
GPIO_InitStructure.GPIO_Speed = GPIO_Speed_2MHz;
|
|
GPIO_InitStructure.GPIO_OType = GPIO_OType_PP;
|
|
GPIO_InitStructure.GPIO_PuPd = GPIO_PuPd_NOPULL;
|
|
GPIO_Init(PYB_LCD_PORT, &GPIO_InitStructure);
|
|
|
|
// init the LCD
|
|
sys_tick_delay_ms(1); // wait a bit
|
|
PYB_LCD_PORT->BSRRH = PYB_LCD_RST_PIN; // RST=0; reset
|
|
sys_tick_delay_ms(1); // wait for reset; 2us min
|
|
PYB_LCD_PORT->BSRRL = PYB_LCD_RST_PIN; // RST=1; enable
|
|
sys_tick_delay_ms(1); // wait for reset; 2us min
|
|
lcd_out(LCD_INSTR, 0xa0); // ADC select, normal
|
|
lcd_out(LCD_INSTR, 0xc8); // common output mode select, reverse
|
|
lcd_out(LCD_INSTR, 0xa2); // LCD bias set, 1/9 bias
|
|
lcd_out(LCD_INSTR, 0x2f); // power control set, 0b111=(booster on, vreg on, vfollow on)
|
|
lcd_out(LCD_INSTR, 0x21); // v0 voltage regulator internal resistor ratio set, 0b001=small
|
|
lcd_out(LCD_INSTR, 0x81); // electronic volume mode set
|
|
lcd_out(LCD_INSTR, 0x34); // electronic volume register set, 0b110100
|
|
lcd_out(LCD_INSTR, 0x40); // display start line set, 0
|
|
lcd_out(LCD_INSTR, 0xaf); // LCD display, on
|
|
|
|
// clear display
|
|
for (int page = 0; page < 4; page++) {
|
|
lcd_out(LCD_INSTR, 0xb0 | page); // page address set
|
|
lcd_out(LCD_INSTR, 0x10); // column address set upper
|
|
lcd_out(LCD_INSTR, 0x00); // column address set lower
|
|
for (int i = 0; i < 128; i++) {
|
|
lcd_out(LCD_DATA, 0x00);
|
|
}
|
|
}
|
|
|
|
for (int i = 0; i < LCD_BUF_H * LCD_BUF_W; i++) {
|
|
lcd_char_buffer[i] = ' ';
|
|
}
|
|
lcd_line = 0;
|
|
lcd_column = 0;
|
|
lcd_next_line = 0;
|
|
|
|
// Python interface
|
|
mp_obj_t m = mp_module_new();
|
|
rt_store_attr(m, qstr_from_str_static("lcd8"), rt_make_function_2(lcd_draw_pixel_8));
|
|
rt_store_attr(m, qstr_from_str_static("clear"), rt_make_function_0(lcd_pix_clear));
|
|
rt_store_attr(m, qstr_from_str_static("get"), rt_make_function_2(lcd_pix_get));
|
|
rt_store_attr(m, qstr_from_str_static("set"), rt_make_function_2(lcd_pix_set));
|
|
rt_store_attr(m, qstr_from_str_static("reset"), rt_make_function_2(lcd_pix_reset));
|
|
rt_store_attr(m, qstr_from_str_static("show"), rt_make_function_0(lcd_pix_show));
|
|
rt_store_attr(m, qstr_from_str_static("text"), rt_make_function_1(lcd_print));
|
|
rt_store_name(qstr_from_str_static("lcd"), m);
|
|
}
|
|
|
|
void lcd_print_str(const char *str) {
|
|
lcd_print_strn(str, strlen(str));
|
|
}
|
|
|
|
void lcd_print_strn(const char *str, unsigned int len) {
|
|
int redraw_min = lcd_line * LCD_BUF_W + lcd_column;
|
|
int redraw_max = redraw_min;
|
|
int did_new_line = 0;
|
|
for (; len > 0; len--, str++) {
|
|
// move to next line if needed
|
|
if (lcd_next_line) {
|
|
if (lcd_line + 1 < LCD_BUF_H) {
|
|
lcd_line += 1;
|
|
} else {
|
|
lcd_line = LCD_BUF_H - 1;
|
|
for (int i = 0; i < LCD_BUF_W * (LCD_BUF_H - 1); i++) {
|
|
lcd_char_buffer[i] = lcd_char_buffer[i + LCD_BUF_W];
|
|
}
|
|
for (int i = 0; i < LCD_BUF_W; i++) {
|
|
lcd_char_buffer[LCD_BUF_W * (LCD_BUF_H - 1) + i] = ' ';
|
|
}
|
|
redraw_min = 0;
|
|
redraw_max = LCD_BUF_W * LCD_BUF_H;
|
|
}
|
|
lcd_next_line = 0;
|
|
lcd_column = 0;
|
|
did_new_line = 1;
|
|
}
|
|
if (*str == '\n') {
|
|
lcd_next_line = 1;
|
|
} else if (lcd_column >= LCD_BUF_W) {
|
|
lcd_next_line = 1;
|
|
str -= 1;
|
|
len += 1;
|
|
} else {
|
|
lcd_char_buffer[lcd_line * LCD_BUF_W + lcd_column] = *str;
|
|
lcd_column += 1;
|
|
int max = lcd_line * LCD_BUF_W + lcd_column;
|
|
if (max > redraw_max) {
|
|
redraw_max = max;
|
|
}
|
|
}
|
|
}
|
|
|
|
int last_page = -1;
|
|
for (int i = redraw_min; i < redraw_max; i++) {
|
|
int page = i / LCD_BUF_W;
|
|
if (page != last_page) {
|
|
int offset = 8 * (i - (page * LCD_BUF_W));
|
|
lcd_out(LCD_INSTR, 0xb0 | page); // page address set
|
|
lcd_out(LCD_INSTR, 0x10 | ((offset >> 4) & 0x0f)); // column address set upper
|
|
lcd_out(LCD_INSTR, 0x00 | (offset & 0x0f)); // column address set lower
|
|
last_page = page;
|
|
}
|
|
int chr = lcd_char_buffer[i];
|
|
if (chr < 32 || chr > 126) {
|
|
chr = 127;
|
|
}
|
|
const uint8_t *chr_data = &font_petme128_8x8[(chr - 32) * 8];
|
|
for (int j = 0; j < 8; j++) {
|
|
lcd_out(LCD_DATA, chr_data[j]);
|
|
}
|
|
}
|
|
|
|
if (did_new_line) {
|
|
sys_tick_delay_ms(200);
|
|
}
|
|
}
|