66 lines
2.2 KiB
C
66 lines
2.2 KiB
C
#define MICROPY_HW_BOARD_NAME "HalloWing M0 Express"
|
|
#define MICROPY_HW_MCU_NAME "samd21g18"
|
|
|
|
#define MICROPY_HW_NEOPIXEL (&pin_PA12)
|
|
|
|
// Clock rates are off: Saleae reads 12MHz which is the limit even though we set it to the safer 8MHz.
|
|
#define SPI_FLASH_BAUDRATE (8000000)
|
|
|
|
#define SPI_FLASH_MOSI_PIN PIN_PB10
|
|
#define SPI_FLASH_MISO_PIN PIN_PA13
|
|
#define SPI_FLASH_SCK_PIN PIN_PB11
|
|
#define SPI_FLASH_CS_PIN PIN_PA07
|
|
#define SPI_FLASH_MOSI_PIN_FUNCTION PINMUX_PB10D_SERCOM4_PAD2
|
|
#define SPI_FLASH_MISO_PIN_FUNCTION PINMUX_PA13D_SERCOM4_PAD1
|
|
#define SPI_FLASH_SCK_PIN_FUNCTION PINMUX_PB11D_SERCOM4_PAD3
|
|
#define SPI_FLASH_SERCOM SERCOM4
|
|
#define SPI_FLASH_SERCOM_INDEX 4
|
|
#define SPI_FLASH_MOSI_PAD 2
|
|
#define SPI_FLASH_MISO_PAD 1
|
|
#define SPI_FLASH_SCK_PAD 3
|
|
// <o> Transmit Data Pinout
|
|
// <0x0=>PAD[0,1]_DO_SCK
|
|
// <0x1=>PAD[2,3]_DO_SCK
|
|
// <0x2=>PAD[3,1]_DO_SCK
|
|
// <0x3=>PAD[0,3]_DO_SCK
|
|
#define SPI_FLASH_DOPO 0x1
|
|
#define SPI_FLASH_DIPO 1 // same as MISO pad
|
|
|
|
// These are pins not to reset.
|
|
#define MICROPY_PORT_A ( PORT_PA01 | PORT_PA07 | PORT_PA12 | PORT_PA13 | PORT_PA24 | PORT_PA25 | PORT_PA27 | PORT_PA28)
|
|
#define MICROPY_PORT_B ( PORT_PB10 | PORT_PB11 | PORT_PB22 | PORT_PB23 )
|
|
#define MICROPY_PORT_C ( 0 )
|
|
|
|
#include "external_flash/external_flash.h"
|
|
|
|
// If you change this, then make sure to update the linker scripts as well to
|
|
// make sure you don't overwrite code.
|
|
#define CIRCUITPY_INTERNAL_NVM_SIZE 256
|
|
|
|
#define BOARD_FLASH_SIZE (0x00040000 - 0x2000 - CIRCUITPY_INTERNAL_NVM_SIZE)
|
|
|
|
#include "external_flash/devices.h"
|
|
|
|
#define EXTERNAL_FLASH_DEVICE_COUNT 2
|
|
|
|
#define EXTERNAL_FLASH_DEVICES W25Q64JV_IQ, \
|
|
GD25Q64C
|
|
|
|
#include "external_flash/external_flash.h"
|
|
|
|
#define DEFAULT_I2C_BUS_SCL (&pin_PA17)
|
|
#define DEFAULT_I2C_BUS_SDA (&pin_PA16)
|
|
|
|
#define DEFAULT_SPI_BUS_SCK (&pin_PB23)
|
|
#define DEFAULT_SPI_BUS_MOSI (&pin_PB22)
|
|
#define DEFAULT_SPI_BUS_MISO (&pin_PB03)
|
|
|
|
#define DEFAULT_UART_BUS_RX (&pin_PA09)
|
|
#define DEFAULT_UART_BUS_TX (&pin_PA10)
|
|
|
|
// USB is always used internally so skip the pin objects for it.
|
|
#define IGNORE_PIN_PA24 1
|
|
#define IGNORE_PIN_PA25 1
|
|
|
|
#define CIRCUITPY_DISPLAYIO (1)
|