246 lines
8.6 KiB
C
Executable File
246 lines
8.6 KiB
C
Executable File
/*
|
|
* This file is part of the MicroPython project, http://micropython.org/
|
|
*
|
|
* The MIT License (MIT)
|
|
*
|
|
* Copyright (c) 2023 CDarius
|
|
*
|
|
* Permission is hereby granted, free of charge, to any person obtaining a copy
|
|
* of this software and associated documentation files (the "Software"), to deal
|
|
* in the Software without restriction, including without limitation the rights
|
|
* to use, copy, modify, merge, publish, distribute, sublicense, and/or sell
|
|
* copies of the Software, and to permit persons to whom the Software is
|
|
* furnished to do so, subject to the following conditions:
|
|
*
|
|
* The above copyright notice and this permission notice shall be included in
|
|
* all copies or substantial portions of the Software.
|
|
*
|
|
* THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
|
|
* IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
|
|
* FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE
|
|
* AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER
|
|
* LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM,
|
|
* OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN
|
|
* THE SOFTWARE.
|
|
*/
|
|
|
|
#include "supervisor/board.h"
|
|
#include "mpconfigboard.h"
|
|
#include "shared-bindings/busio/SPI.h"
|
|
#include "shared-bindings/busio/I2C.h"
|
|
#include "shared-bindings/displayio/FourWire.h"
|
|
#include "shared-module/displayio/__init__.h"
|
|
#include "shared-module/displayio/mipi_constants.h"
|
|
#include "shared-bindings/board/__init__.h"
|
|
#include "shared-bindings/microcontroller/Pin.h"
|
|
#include "components/driver/include/driver/gpio.h"
|
|
#include "components/hal/include/hal/gpio_hal.h"
|
|
#include "common-hal/microcontroller/Pin.h"
|
|
|
|
#include "../../pmic/axp192/axp192.h"
|
|
|
|
// display init sequence according to adafruit_st7735r.py library
|
|
uint8_t display_init_sequence[] = {
|
|
0x01,0x80,0x96, // SWRESET and Delay 150ms
|
|
0x11,0x80,0xff, // SLPOUT and Delay
|
|
0xb1,0x03,0x01,0x2C,0x2D, // _FRMCTR1
|
|
0xb2,0x03,0x01,0x2C,0x2D, // _FRMCTR2
|
|
0xb3,0x06,0x01,0x2C,0x2D,0x01,0x2C,0x2D, // _FRMCTR3
|
|
0xb4,0x01,0x07, // _INVCTR line inversion
|
|
0xc0,0x03,0xa2,0x02,0x84, // _PWCTR1 GVDD = 4.7V, 1.0uA
|
|
0xc1,0x01,0xc5, // _PWCTR2 VGH=14.7V, VGL=-7.35V
|
|
0xc2,0x02,0x0a,0x00, // _PWCTR3 Opamp current small, Boost frequency
|
|
0xc3,0x02,0x8a,0x2a,
|
|
0xc4,0x02,0x8a,0xee,
|
|
0xc5,0x01,0x0e, // _VMCTR1 VCOMH = 4V, VOML = -1.1V
|
|
0x36,0x01,0xc8, // MADCTL Rotate display
|
|
0x21,0x00, // _INVON
|
|
0x3a,0x01,0x05, // COLMOD - 16bit color
|
|
0xe0,0x10,0x02,0x1c,0x07,0x12,0x37,0x32,0x29,0x2d,0x29,0x25,0x2B,0x39,0x00,0x01,0x03,0x10, // _GMCTRP1 Gamma
|
|
0xe1,0x10,0x03,0x1d,0x07,0x06,0x2E,0x2C,0x29,0x2D,0x2E,0x2E,0x37,0x3F,0x00,0x00,0x02,0x10, // _GMCTRN1
|
|
0x13,0x80,0x0a, // _NORON
|
|
0x29,0x80,0x64 // _DISPON
|
|
};
|
|
|
|
static bool pmic_init(busio_i2c_obj_t *i2c) {
|
|
int rc;
|
|
uint8_t write_buf[2];
|
|
|
|
if (!pmic_common_init(i2c)) {
|
|
return false;
|
|
}
|
|
|
|
// Reg: 30h
|
|
// The VBUS-IPSOUT path can be selected to be opened regardless of the status of N_VBUSEN
|
|
// VBUS VHOLD pressure limit control disabled
|
|
// VBUS current limit control disabled
|
|
write_buf[0] = AXP192_VBUS_IPSOUT;
|
|
write_buf[1] = AXP192_VBUS_IPSOUT_IGNORE_VBUSEN;
|
|
rc = common_hal_busio_i2c_write(i2c, AXP192_I2C_ADDRESS, write_buf, sizeof(write_buf));
|
|
if (rc != 0) {
|
|
return false;
|
|
}
|
|
|
|
// Reg: 33h
|
|
// Charge function enable control bit, including internal and external channels
|
|
// Charging target voltage: 4.2V
|
|
// Charging end current: End charging when charging current is less than 10% setting
|
|
// Internal path charging current: 100mA
|
|
write_buf[0] = AXP192_CHARGING_CTRL1;
|
|
write_buf[1] = AXP192_CHARGING_CTRL1_ENABLE |
|
|
AXP192_CHARGING_CTRL1_VOLTAGE_4_20V |
|
|
AXP192_CHARGING_CTRL1_CURRENT_100mA;
|
|
rc = common_hal_busio_i2c_write(i2c, AXP192_I2C_ADDRESS, write_buf, sizeof(write_buf));
|
|
if (rc != 0) {
|
|
return false;
|
|
}
|
|
|
|
// Reg: 90h
|
|
// GPIO0(LDOio0) floating
|
|
write_buf[0] = AXP192_GPIO0_FUNCTION;
|
|
write_buf[1] = AXP192_GPIO0_FUNCTION_FLOATING;
|
|
rc = common_hal_busio_i2c_write(i2c, AXP192_I2C_ADDRESS, write_buf, sizeof(write_buf));
|
|
if (rc != 0) {
|
|
return false;
|
|
}
|
|
|
|
// Reg: 91h
|
|
// GPIO0(LDOio0) 2.8V
|
|
write_buf[0] = AXP192_GPIO0_LDO_VOLTAGE;
|
|
write_buf[1] = AXP192_GPIO0_LDO_VOLTAGE_2_8V;
|
|
rc = common_hal_busio_i2c_write(i2c, AXP192_I2C_ADDRESS, write_buf, sizeof(write_buf));
|
|
if (rc != 0) {
|
|
return false;
|
|
}
|
|
|
|
// Reg: 28h
|
|
// LDO2 (TFT backlight): 2.8V
|
|
// LDO3 (TFT logic): 3.0V
|
|
write_buf[0] = AXP192_LDO23_OUT_VOLTAGE;
|
|
write_buf[1] = AXP192_LDO23_OUT_VOLTAGE_LDO2_2_8V |
|
|
AXP192_LDO23_OUT_VOLTAGE_LDO3_3_0V;
|
|
rc = common_hal_busio_i2c_write(i2c, AXP192_I2C_ADDRESS, write_buf, sizeof(write_buf));
|
|
if (rc != 0) {
|
|
return false;
|
|
}
|
|
|
|
// Reg: 12h
|
|
// Enable CTRL_EXTEN, DCDC1, LDO2 and LDO3
|
|
write_buf[0] = AXP192_DCDC13_LDO23_CTRL;
|
|
write_buf[1] = AXP192_DCDC13_LDO23_CTRL_EXTEN |
|
|
AXP192_DCDC13_LDO23_CTRL_LDO3 |
|
|
AXP192_DCDC13_LDO23_CTRL_LDO2 |
|
|
AXP192_DCDC13_LDO23_CTRL_DCDC1;
|
|
rc = common_hal_busio_i2c_write(i2c, AXP192_I2C_ADDRESS, write_buf, sizeof(write_buf));
|
|
if (rc != 0) {
|
|
return false;
|
|
}
|
|
|
|
// Reg: 26h
|
|
// DCDC1 (ESP32 VDD): 3.350V
|
|
write_buf[0] = AXP192_DCDC1_OUT_VOLTAGE;
|
|
write_buf[1] = AXP192_DCDC1_OUT_VOLTAGE_3_350V;
|
|
rc = common_hal_busio_i2c_write(i2c, AXP192_I2C_ADDRESS, write_buf, sizeof(write_buf));
|
|
if (rc != 0) {
|
|
return false;
|
|
}
|
|
|
|
if (!pmic_disable_all_irq(i2c)) {
|
|
return false;
|
|
}
|
|
|
|
if (!pmic_clear_all_irq(i2c)) {
|
|
return false;
|
|
}
|
|
|
|
if (!pmic_enable_power_key_press_irq(i2c)) {
|
|
return false;
|
|
}
|
|
|
|
if (!pmic_enable_low_battery_irq(i2c)) {
|
|
return false;
|
|
}
|
|
|
|
return true;
|
|
}
|
|
|
|
static bool display_init(void) {
|
|
displayio_fourwire_obj_t *bus = &allocate_display_bus()->fourwire_bus;
|
|
busio_spi_obj_t *spi = &bus->inline_bus;
|
|
common_hal_busio_spi_construct(spi, &pin_GPIO13, &pin_GPIO15, NULL, false);
|
|
common_hal_busio_spi_never_reset(spi);
|
|
|
|
bus->base.type = &displayio_fourwire_type;
|
|
|
|
common_hal_displayio_fourwire_construct(
|
|
bus,
|
|
spi,
|
|
&pin_GPIO23, // DC
|
|
&pin_GPIO5, // CS
|
|
&pin_GPIO18, // RST
|
|
10000000, // baudrate
|
|
0, // polarity
|
|
0 // phase
|
|
);
|
|
|
|
displayio_display_obj_t *display = &allocate_display()->display;
|
|
display->base.type = &displayio_display_type;
|
|
|
|
common_hal_displayio_display_construct(
|
|
display,
|
|
bus,
|
|
80, // width (after rotation)
|
|
160, // height (after rotation)
|
|
26, // column start
|
|
1, // row start
|
|
0, // rotation
|
|
16, // color depth
|
|
false, // grayscale
|
|
false, // pixels in a byte share a row. Only valid for depths < 8
|
|
1, // bytes per cell. Only valid for depths < 8
|
|
false, // reverse_pixels_in_byte. Only valid for depths < 8
|
|
true, // reverse_pixels_in_word
|
|
MIPI_COMMAND_SET_COLUMN_ADDRESS, // set column command
|
|
MIPI_COMMAND_SET_PAGE_ADDRESS, // set row command
|
|
MIPI_COMMAND_WRITE_MEMORY_START, // write memory command
|
|
display_init_sequence,
|
|
sizeof(display_init_sequence),
|
|
NULL, // backlight pin
|
|
NO_BRIGHTNESS_COMMAND,
|
|
1.0f, // brightness
|
|
false, // single_byte_bounds
|
|
false, // data_as_commands
|
|
true, // auto_refresh
|
|
80, // native_frames_per_second
|
|
false, // backlight_on_high
|
|
false, // SH1107_addressing
|
|
50000 // backlight pwm frequency
|
|
);
|
|
|
|
return true;
|
|
}
|
|
|
|
void board_init(void) {
|
|
busio_i2c_obj_t *internal_i2c = common_hal_board_create_i2c(0);
|
|
|
|
if (!pmic_init(internal_i2c)) {
|
|
mp_printf(&mp_plat_print, "could not initialize axp192 pmic\n");
|
|
return;
|
|
}
|
|
|
|
if (!display_init()) {
|
|
mp_printf(&mp_plat_print, "could not initialize the display");
|
|
return;
|
|
}
|
|
}
|
|
|
|
bool espressif_board_reset_pin_number(gpio_num_t pin_number) {
|
|
// Set IR led gpio high to prevent power drain from the led
|
|
if (pin_number == 9) {
|
|
gpio_set_direction(pin_number, GPIO_MODE_DEF_OUTPUT);
|
|
gpio_set_level(pin_number, true);
|
|
return true;
|
|
}
|
|
return false;
|
|
}
|