361 lines
13 KiB
C
361 lines
13 KiB
C
/**
|
|
******************************************************************************
|
|
* @file stm32f2xx_hal_flash.h
|
|
* @author MCD Application Team
|
|
* @version V1.0.1
|
|
* @date 25-March-2014
|
|
* @brief Header file of FLASH HAL module.
|
|
******************************************************************************
|
|
* @attention
|
|
*
|
|
* <h2><center>© COPYRIGHT(c) 2014 STMicroelectronics</center></h2>
|
|
*
|
|
* Redistribution and use in source and binary forms, with or without modification,
|
|
* are permitted provided that the following conditions are met:
|
|
* 1. Redistributions of source code must retain the above copyright notice,
|
|
* this list of conditions and the following disclaimer.
|
|
* 2. Redistributions in binary form must reproduce the above copyright notice,
|
|
* this list of conditions and the following disclaimer in the documentation
|
|
* and/or other materials provided with the distribution.
|
|
* 3. Neither the name of STMicroelectronics nor the names of its contributors
|
|
* may be used to endorse or promote products derived from this software
|
|
* without specific prior written permission.
|
|
*
|
|
* THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
|
|
* AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
|
|
* IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
|
|
* DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE
|
|
* FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
|
|
* DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
|
|
* SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
|
|
* CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
|
|
* OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
|
|
* OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
|
|
*
|
|
******************************************************************************
|
|
*/
|
|
|
|
/* Define to prevent recursive inclusion -------------------------------------*/
|
|
#ifndef __STM32F2xx_HAL_FLASH_H
|
|
#define __STM32F2xx_HAL_FLASH_H
|
|
|
|
#ifdef __cplusplus
|
|
extern "C" {
|
|
#endif
|
|
|
|
/* Includes ------------------------------------------------------------------*/
|
|
#include "stm32f2xx_hal_def.h"
|
|
|
|
/** @addtogroup STM32F2xx_HAL_Driver
|
|
* @{
|
|
*/
|
|
|
|
/** @addtogroup FLASH
|
|
* @{
|
|
*/
|
|
|
|
/* Exported types ------------------------------------------------------------*/
|
|
/**
|
|
* @brief FLASH Error structure definition
|
|
*/
|
|
typedef enum
|
|
{
|
|
FLASH_ERROR_RD = 0x01,
|
|
FLASH_ERROR_PGS = 0x02,
|
|
FLASH_ERROR_PGP = 0x04,
|
|
FLASH_ERROR_PGA = 0x08,
|
|
FLASH_ERROR_WRP = 0x10,
|
|
FLASH_ERROR_OPERATION = 0x20
|
|
}FLASH_ErrorTypeDef;
|
|
|
|
/**
|
|
* @brief FLASH Procedure structure definition
|
|
*/
|
|
typedef enum
|
|
{
|
|
FLASH_PROC_NONE = 0,
|
|
FLASH_PROC_SECTERASE,
|
|
FLASH_PROC_MASSERASE,
|
|
FLASH_PROC_PROGRAM
|
|
} FLASH_ProcedureTypeDef;
|
|
|
|
|
|
/**
|
|
* @brief FLASH handle Structure definition
|
|
*/
|
|
typedef struct
|
|
{
|
|
__IO FLASH_ProcedureTypeDef ProcedureOnGoing; /*Internal variable to indicate which procedure is ongoing or not in IT context*/
|
|
|
|
__IO uint32_t NbSectorsToErase; /*Internal variable to save the remaining sectors to erase in IT context*/
|
|
|
|
__IO uint8_t VoltageForErase; /*Internal variable to provide voltange range selected by user in IT context*/
|
|
|
|
__IO uint32_t Sector; /*Internal variable to define the current sector which is erasing*/
|
|
|
|
__IO uint32_t Address; /*Internal variable to save address selected for program*/
|
|
|
|
HAL_LockTypeDef Lock; /* FLASH locking object */
|
|
|
|
__IO FLASH_ErrorTypeDef ErrorCode; /* FLASH error code */
|
|
|
|
}FLASH_ProcessTypeDef;
|
|
|
|
/**
|
|
* @brief FLASH Error source
|
|
*/
|
|
/* Exported constants --------------------------------------------------------*/
|
|
|
|
/** @defgroup FLASH_Exported_Constants FLASH Exported Constants
|
|
* @{
|
|
*/
|
|
|
|
|
|
|
|
/** @defgroup FLASH_Type_Program FLASH Type Program
|
|
* @{
|
|
*/
|
|
#define TYPEPROGRAM_BYTE ((uint32_t)0x00) /*!< Program byte (8-bit) at a specified address */
|
|
#define TYPEPROGRAM_HALFWORD ((uint32_t)0x01) /*!< Program a half-word (16-bit) at a specified address */
|
|
#define TYPEPROGRAM_WORD ((uint32_t)0x02) /*!< Program a word (32-bit) at a specified address */
|
|
#define TYPEPROGRAM_DOUBLEWORD ((uint32_t)0x03) /*!< Program a double word (64-bit) at a specified address */
|
|
|
|
#define IS_TYPEPROGRAM(VALUE)(((VALUE) == TYPEPROGRAM_BYTE) || \
|
|
((VALUE) == TYPEPROGRAM_HALFWORD) || \
|
|
((VALUE) == TYPEPROGRAM_WORD) || \
|
|
((VALUE) == TYPEPROGRAM_DOUBLEWORD))
|
|
|
|
/**
|
|
* @}
|
|
*/
|
|
|
|
/** @defgroup FLASH_Flag_definition FLASH Flag definition
|
|
* @brief Flag definition
|
|
* @{
|
|
*/
|
|
#define FLASH_FLAG_EOP FLASH_SR_EOP /*!< FLASH End of Operation flag */
|
|
#define FLASH_FLAG_OPERR FLASH_SR_SOP /*!< FLASH operation Error flag */
|
|
#define FLASH_FLAG_WRPERR FLASH_SR_WRPERR /*!< FLASH Write protected error flag */
|
|
#define FLASH_FLAG_PGAERR FLASH_SR_PGAERR /*!< FLASH Programming Alignment error flag */
|
|
#define FLASH_FLAG_PGPERR FLASH_SR_PGPERR /*!< FLASH Programming Parallelism error flag */
|
|
#define FLASH_FLAG_PGSERR FLASH_SR_PGSERR /*!< FLASH Programming Sequence error flag */
|
|
#define FLASH_FLAG_RDERR ((uint32_t)0x00000100) /*!< Read Protection error flag (PCROP) */
|
|
#define FLASH_FLAG_BSY FLASH_SR_BSY /*!< FLASH Busy flag */
|
|
|
|
/**
|
|
* @}
|
|
*/
|
|
|
|
/** @defgroup FLASH_Interrupt_definition FLASH Interrupt definition
|
|
* @brief FLASH Interrupt definition
|
|
* @{
|
|
*/
|
|
#define FLASH_IT_EOP FLASH_CR_EOPIE /*!< End of FLASH Operation Interrupt source */
|
|
#define FLASH_IT_ERR ((uint32_t)0x02000000) /*!< Error Interrupt source */
|
|
|
|
/**
|
|
* @}
|
|
*/
|
|
|
|
/** @defgroup FLASH_Program_Parallelism FLASH Program Parallelism
|
|
* @{
|
|
*/
|
|
#define FLASH_PSIZE_BYTE ((uint32_t)0x00000000)
|
|
#define FLASH_PSIZE_HALF_WORD ((uint32_t)0x00000100)
|
|
#define FLASH_PSIZE_WORD ((uint32_t)0x00000200)
|
|
#define FLASH_PSIZE_DOUBLE_WORD ((uint32_t)0x00000300)
|
|
#define CR_PSIZE_MASK ((uint32_t)0xFFFFFCFF)
|
|
/**
|
|
* @}
|
|
*/
|
|
|
|
/** @defgroup FLASH_Keys FLASH Keys
|
|
* @{
|
|
*/
|
|
#define RDP_KEY ((uint16_t)0x00A5)
|
|
#define FLASH_KEY1 ((uint32_t)0x45670123)
|
|
#define FLASH_KEY2 ((uint32_t)0xCDEF89AB)
|
|
#define FLASH_OPT_KEY1 ((uint32_t)0x08192A3B)
|
|
#define FLASH_OPT_KEY2 ((uint32_t)0x4C5D6E7F)
|
|
/**
|
|
* @}
|
|
*/
|
|
|
|
/**
|
|
* @brief ACR register byte 0 (Bits[7:0]) base address
|
|
*/
|
|
#define ACR_BYTE0_ADDRESS ((uint32_t)0x40023C00)
|
|
/**
|
|
* @brief OPTCR register byte 0 (Bits[7:0]) base address
|
|
*/
|
|
#define OPTCR_BYTE0_ADDRESS ((uint32_t)0x40023C14)
|
|
/**
|
|
* @brief OPTCR register byte 1 (Bits[15:8]) base address
|
|
*/
|
|
#define OPTCR_BYTE1_ADDRESS ((uint32_t)0x40023C15)
|
|
/**
|
|
* @brief OPTCR register byte 2 (Bits[23:16]) base address
|
|
*/
|
|
#define OPTCR_BYTE2_ADDRESS ((uint32_t)0x40023C16)
|
|
/**
|
|
* @brief OPTCR register byte 3 (Bits[31:24]) base address
|
|
*/
|
|
#define OPTCR_BYTE3_ADDRESS ((uint32_t)0x40023C17)
|
|
|
|
/**
|
|
* @}
|
|
*/
|
|
|
|
/* Exported macro ------------------------------------------------------------*/
|
|
|
|
/**
|
|
* @brief Set the FLASH Latency.
|
|
* @param __LATENCY__: FLASH Latency
|
|
* The value of this parameter depend on device used within the same series
|
|
* @retval none
|
|
*/
|
|
#define __HAL_FLASH_SET_LATENCY(__LATENCY__) (*(__IO uint8_t *)ACR_BYTE0_ADDRESS = (uint8_t)(__LATENCY__))
|
|
|
|
/**
|
|
* @brief Enable the FLASH prefetch buffer.
|
|
* @retval none
|
|
*/
|
|
#define __HAL_FLASH_PREFETCH_BUFFER_ENABLE() (FLASH->ACR |= FLASH_ACR_PRFTEN)
|
|
|
|
/**
|
|
* @brief Disable the FLASH prefetch buffer.
|
|
* @retval none
|
|
*/
|
|
#define __HAL_FLASH_PREFETCH_BUFFER_DISABLE() (FLASH->ACR &= (~FLASH_ACR_PRFTEN))
|
|
|
|
/**
|
|
* @brief Enable the FLASH instruction cache.
|
|
* @retval none
|
|
*/
|
|
#define __HAL_FLASH_INSTRUCTION_CACHE_ENABLE() (FLASH->ACR |= FLASH_ACR_ICEN)
|
|
|
|
/**
|
|
* @brief Disable the FLASH instruction cache.
|
|
* @retval none
|
|
*/
|
|
#define __HAL_FLASH_INSTRUCTION_CACHE_DISABLE() (FLASH->ACR &= (~FLASH_ACR_ICEN))
|
|
|
|
/**
|
|
* @brief Enable the FLASH data cache.
|
|
* @retval none
|
|
*/
|
|
#define __HAL_FLASH_DATA_CACHE_ENABLE() (FLASH->ACR |= FLASH_ACR_DCEN)
|
|
|
|
/**
|
|
* @brief Disable the FLASH data cache.
|
|
* @retval none
|
|
*/
|
|
#define __HAL_FLASH_DATA_CACHE_DISABLE() (FLASH->ACR &= (~FLASH_ACR_DCEN))
|
|
|
|
/**
|
|
* @brief Resets the FLASH instruction Cache.
|
|
* @note This function must be used only when the Instruction Cache is disabled.
|
|
* @retval None
|
|
*/
|
|
#define __HAL_FLASH_INSTRUCTION_CACHE_RESET() (FLASH->ACR |= FLASH_ACR_ICRST)
|
|
|
|
/**
|
|
* @brief Resets the FLASH data Cache.
|
|
* @note This function must be used only when the data Cache is disabled.
|
|
* @retval None
|
|
*/
|
|
#define __HAL_FLASH_DATA_CACHE_RESET() (FLASH->ACR |= FLASH_ACR_DCRST)
|
|
|
|
/**
|
|
* @brief Enable the specified FLASH interrupt.
|
|
* @param __INTERRUPT__ : FLASH interrupt
|
|
* This parameter can be any combination of the following values:
|
|
* @arg FLASH_IT_EOP: End of FLASH Operation Interrupt
|
|
* @arg FLASH_IT_ERR: Error Interrupt
|
|
* @retval none
|
|
*/
|
|
#define __HAL_FLASH_ENABLE_IT(__INTERRUPT__) (FLASH->CR |= (__INTERRUPT__))
|
|
|
|
/**
|
|
* @brief Disable the specified FLASH interrupt.
|
|
* @param __INTERRUPT__ : FLASH interrupt
|
|
* This parameter can be any combination of the following values:
|
|
* @arg FLASH_IT_EOP: End of FLASH Operation Interrupt
|
|
* @arg FLASH_IT_ERR: Error Interrupt
|
|
* @retval none
|
|
*/
|
|
#define __HAL_FLASH_DISABLE_IT(__INTERRUPT__) (FLASH->CR &= ~(uint32_t)(__INTERRUPT__))
|
|
|
|
/**
|
|
* @brief Get the specified FLASH flag status.
|
|
* @param __FLAG__: specifies the FLASH flag to check.
|
|
* This parameter can be one of the following values:
|
|
* @arg FLASH_FLAG_EOP : FLASH End of Operation flag
|
|
* @arg FLASH_FLAG_OPERR : FLASH operation Error flag
|
|
* @arg FLASH_FLAG_WRPERR: FLASH Write protected error flag
|
|
* @arg FLASH_FLAG_PGAERR: FLASH Programming Alignment error flag
|
|
* @arg FLASH_FLAG_PGPERR: FLASH Programming Parallelism error flag
|
|
* @arg FLASH_FLAG_PGSERR: FLASH Programming Sequence error flag
|
|
* @arg FLASH_FLAG_RDERR : FLASH Read Protection error flag (PCROP)
|
|
* @arg FLASH_FLAG_BSY : FLASH Busy flag
|
|
* @retval The new state of __FLAG__ (SET or RESET).
|
|
*/
|
|
#define __HAL_FLASH_GET_FLAG(__FLAG__) ((FLASH->SR & (__FLAG__)))
|
|
|
|
/**
|
|
* @brief Clear the specified FLASH flag.
|
|
* @param __FLAG__: specifies the FLASH flags to clear.
|
|
* This parameter can be any combination of the following values:
|
|
* @arg FLASH_FLAG_EOP : FLASH End of Operation flag
|
|
* @arg FLASH_FLAG_OPERR : FLASH operation Error flag
|
|
* @arg FLASH_FLAG_WRPERR: FLASH Write protected error flag
|
|
* @arg FLASH_FLAG_PGAERR: FLASH Programming Alignment error flag
|
|
* @arg FLASH_FLAG_PGPERR: FLASH Programming Parallelism error flag
|
|
* @arg FLASH_FLAG_PGSERR: FLASH Programming Sequence error flag
|
|
* @arg FLASH_FLAG_RDERR : FLASH Read Protection error flag (PCROP)
|
|
* @retval none
|
|
*/
|
|
#define __HAL_FLASH_CLEAR_FLAG(__FLAG__) (FLASH->SR = (__FLAG__))
|
|
|
|
/* Include FLASH HAL Extension module */
|
|
#include "stm32f2xx_hal_flash_ex.h"
|
|
|
|
/* Exported functions --------------------------------------------------------*/
|
|
/* Program operation functions ***********************************************/
|
|
HAL_StatusTypeDef HAL_FLASH_Program(uint32_t TypeProgram, uint32_t Address, uint64_t Data);
|
|
HAL_StatusTypeDef HAL_FLASH_Program_IT(uint32_t TypeProgram, uint32_t Address, uint64_t Data);
|
|
/* FLASH IRQ handler method */
|
|
void HAL_FLASH_IRQHandler(void);
|
|
/* Callbacks in non blocking modes */
|
|
void HAL_FLASH_EndOfOperationCallback(uint32_t ReturnValue);
|
|
void HAL_FLASH_OperationErrorCallback(uint32_t ReturnValue);
|
|
|
|
/* Peripheral Control functions **********************************************/
|
|
HAL_StatusTypeDef HAL_FLASH_Unlock(void);
|
|
HAL_StatusTypeDef HAL_FLASH_Lock(void);
|
|
HAL_StatusTypeDef HAL_FLASH_OB_Unlock(void);
|
|
HAL_StatusTypeDef HAL_FLASH_OB_Lock(void);
|
|
/* Option bytes control */
|
|
HAL_StatusTypeDef HAL_FLASH_OB_Launch(void);
|
|
|
|
/* Peripheral State functions ************************************************/
|
|
FLASH_ErrorTypeDef HAL_FLASH_GetError(void);
|
|
|
|
HAL_StatusTypeDef FLASH_WaitForLastOperation(uint32_t Timeout);
|
|
|
|
/**
|
|
* @}
|
|
*/
|
|
|
|
/**
|
|
* @}
|
|
*/
|
|
|
|
#ifdef __cplusplus
|
|
}
|
|
#endif
|
|
|
|
#endif /* __STM32F2xx_HAL_FLASH_H */
|
|
|
|
/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/
|