djsundog
/
circuitpython
1
0
Fork 0
Code Issues Pull Requests Packages Projects Releases Wiki Activity
circuitpython/atmel-samd/Makefile

322 lines
9.4 KiB
Makefile
Raw Blame History

# Select the board to build for: if not given on the command line,
# then default to PYBV10.
BOARD ?= arduino_zero
ifeq ($(wildcard boards/$(BOARD)/.),)
$(error Invalid BOARD specified)
endif
# If the build directory is not given, make it reflect the board name.
BUILD ?= build-$(BOARD)
include ../py/mkenv.mk
-include mpconfigport.mk
include boards/$(BOARD)/mpconfigboard.mk
# qstr definitions (must come before including py.mk)
# TODO(tannewt): Support friendly pin names like the stmhal implementations do.
# Add $(BUILD)/pins_qstr.h $(BUILD)/modstm_qstr.h
QSTR_DEFS = qstrdefsport.h
# include py core make definitions
include ../py/py.mk
CROSS_COMPILE = arm-none-eabi-
BOSSAC := tools/bossac_osx
HAL_DIR=hal/$(MCU_SERIES)
INC += -I.
INC += -I..
INC += -I../lib/mp-readline
INC += -I../lib/timeutils
INC += -Iasf_conf/
INC += -Iasf/common/boards/
INC += -Iasf/common/services/sleepmgr/
INC += -Iasf/common/services/storage/ctrl_access/
INC += -Iasf/common/services/usb/
INC += -Iasf/common/services/usb/class/cdc/
INC += -Iasf/common/services/usb/class/cdc/device/
INC += -Iasf/common/services/usb/class/hid/
INC += -Iasf/common/services/usb/class/hid/device/
INC += -Iasf/common/services/usb/class/hid/device/kbd/
INC += -Iasf/common/services/usb/class/hid/device/mouse/
INC += -Iasf/common/services/usb/class/msc/
INC += -Iasf/common/services/usb/class/msc/device/
INC += -Iasf/common/services/usb/udc/
INC += -Iasf/common/utils
INC += -Iasf/common2/services/delay/
INC += $(addprefix -Iasf/sam0/,\
drivers/events \
drivers/extint \
drivers/port \
drivers/system \
drivers/adc/adc_sam_d_r \
drivers/dac \
drivers/dac/dac_sam_d_c \
drivers/sercom \
drivers/sercom/i2c \
drivers/system/clock \
drivers/system/clock/clock_samd21_r21_da \
drivers/system/interrupt \
drivers/system/interrupt/system_interrupt_samd21 \
drivers/system/pinmux \
drivers/system/power/power_sam_d_r \
drivers/system/reset/reset_sam_d_r \
drivers/tc \
drivers/usb \
utils \
utils/cmsis/samd21/include \
utils/cmsis/samd21/source \
utils/header_files \
utils/preprocessor \
)
INC += -Iasf/thirdparty/CMSIS/Include
INC += -Iboards
INC += -Iboards/$(BOARD)/
INC += -Ifreetouch/
INC += -I$(BUILD)
CFLAGS_CORTEX_M0 = \
-mthumb \
-mabi=aapcs-linux \
-mcpu=cortex-m0plus \
-msoft-float \
-mfloat-abi=soft \
-fsingle-precision-constant \
-fno-strict-aliasing \
-Wdouble-promotion \
-Wno-endif-labels \
-Wstrict-prototypes \
-Werror-implicit-function-declaration \
-Wpointer-arith \
-Wfloat-equal \
-Wundef \
-Wshadow \
-Wwrite-strings \
-Wsign-compare \
-Wmissing-format-attribute \
-Wno-deprecated-declarations \
-Wpacked \
-Wnested-externs \
-Wunreachable-code \
-Wcast-align \
-D__$(CHIP_VARIANT)__ \
-DUSB_DEVICE_PRODUCT_ID=$(USB_PID) \
-DUSB_DEVICE_VENDOR_ID=$(USB_VID) \
-DBOARD=USER_BOARD \
-ffunction-sections \
-fdata-sections \
-fshort-enums \
-D ARM_MATH_CM0PLUS=true \
-DSYSTICK_MODE \
-DEXTINT_CALLBACK_MODE=true \
-DUDD_ENABLE \
-DUSART_CALLBACK_MODE=false \
-DSPI_CALLBACK_MODE=false \
-DI2C_MASTER_CALLBACK_MODE=false \
-DDAC_CALLBACK_MODE=false \
-DTCC_ASYNC=false \
-DADC_CALLBACK_MODE=false \
-DEVENTS_INTERRUPT_HOOKS_MODE=false \
-DTC_ASYNC=true \
-DUSB_DEVICE_LPM_SUPPORT \
-DCIRCUITPY_CANARY_WORD=0xADAF00 \
-DCIRCUITPY_SAFE_RESTART_WORD=0xDEADBEEF \
--param max-inline-insns-single=500
CFLAGS = $(INC) -Wall -Werror -std=gnu11 -nostdlib $(CFLAGS_CORTEX_M0) $(COPT)
#Debugging/Optimization
# TODO(tannewt): Figure out what NDEBUG does. Adding it to the debug build
# reduces code size pretty dramatically.
ifeq ($(DEBUG), 1)
CFLAGS += -Os -ggdb -DNDEBUG -DENABLE_MICRO_TRACE_BUFFER
else
CFLAGS += -Os -DNDEBUG -flto
endif
ifneq ($(FROZEN_DIR),)
# To use frozen source modules, put your .py files in a subdirectory (eg scripts/)
# and then invoke make with FROZEN_DIR=scripts (be sure to build from scratch).
CFLAGS += -DMICROPY_MODULE_FROZEN_STR
endif
ifneq ($(FROZEN_MPY_DIR),)
# To use frozen bytecode, put your .py files in a subdirectory (eg frozen/) and
# then invoke make with FROZEN_MPY_DIR=frozen (be sure to build from scratch).
CFLAGS += -DMICROPY_QSTR_EXTRA_POOL=mp_qstr_frozen_const_pool
CFLAGS += -DMICROPY_MODULE_FROZEN_MPY
endif
#LIBM_FILE_NAME = $(shell $(CC) $(CFLAGS) -print-file-name=libm.a)
LDFLAGS = $(CFLAGS) -nostartfiles -fshort-enums -mthumb -mcpu=cortex-m0plus -Lasf/thirdparty/CMSIS/Lib/GCC/ -Wl,-nostdlib -Wl,-T,$(LD_FILE) -Wl,-Map=$@.map -Wl,-cref -Wl,-gc-sections -specs=nano.specs
LIBS = -larm_cortexM0l_math -lm -lgcc -lc
SRC_ASF = $(addprefix asf/sam0/,\
drivers/adc/adc_sam_d_r/adc.c \
drivers/dac/dac_sam_d_c/dac.c \
drivers/dma/dma.c \
drivers/events/events_sam_d_r/events.c \
drivers/extint/extint_callback.c \
drivers/extint/extint_sam_d_r/extint.c \
drivers/nvm/nvm.c \
drivers/port/port.c \
drivers/sercom/i2c/i2c_sam0/i2c_master.c \
drivers/sercom/sercom.c \
drivers/sercom/sercom_interrupt.c \
drivers/sercom/spi/spi.c \
drivers/sercom/usart/usart.c \
drivers/system/clock/clock_samd21_r21_da/clock.c \
drivers/system/clock/clock_samd21_r21_da/gclk.c \
drivers/system/interrupt/system_interrupt.c \
drivers/system/pinmux/pinmux.c \
drivers/system/system.c \
drivers/tc/tc_interrupt.c \
drivers/tc/tc_sam_d_r/tc.c \
drivers/tcc/tcc.c \
drivers/usb/stack_interface/usb_device_udd.c \
drivers/usb/stack_interface/usb_dual.c \
drivers/usb/usb_sam_d_r/usb.c \
)
SRC_C = \
access_vfs.c \
autoreload.c \
background.c \
builtin_open.c \
fatfs_port.c \
flash_api.c \
main.c \
moduos.c \
mphalport.c \
samd21_pins.c \
shared_dma.c \
rgb_led_status.c \
tick.c \
$(FLASH_IMPL) \
bindings/samd/__init__.c \
asf/common/services/sleepmgr/samd/sleepmgr.c \
asf/common/services/storage/ctrl_access/ctrl_access.c \
asf/common/services/usb/class/cdc/device/udi_cdc.c \
asf/common/services/usb/class/composite/device/udi_composite_desc.c \
asf/common/services/usb/class/hid/device/udi_hid.c \
asf/common/services/usb/class/hid/device/mouse/udi_hid_mouse.c \
asf/common/services/usb/class/hid/device/kbd/udi_hid_kbd.c \
asf/common/services/usb/class/msc/device/udi_msc.c \
asf/common/services/usb/udc/udc.c \
asf/common/utils/interrupt/interrupt_sam_nvic.c \
asf/common2/services/delay/sam0/systick_counter.c \
asf/sam0/utils/cmsis/samd21/source/gcc/startup_samd21.c \
asf/sam0/utils/cmsis/samd21/source/system_samd21.c \
asf/sam0/utils/syscalls/gcc/syscalls.c \
boards/$(BOARD)/init.c \
boards/$(BOARD)/pins.c \
freetouch/adafruit_ptc.c \
lib/fatfs/ff.c \
lib/fatfs/option/ccsbcs.c \
lib/timeutils/timeutils.c \
lib/utils/buffer_helper.c \
lib/utils/context_manager_helpers.c \
lib/utils/interrupt_char.c \
lib/utils/pyexec.c \
lib/utils/pyhelp.c \
lib/utils/stdout_helpers.c \
lib/libc/string0.c \
lib/mp-readline/builtin_input.c \
lib/mp-readline/readline.c
STM_SRC_C = $(addprefix stmhal/,\
pybstdio.c \
)
SRC_COMMON_HAL = \
board/__init__.c \
microcontroller/__init__.c \
microcontroller/Pin.c \
analogio/__init__.c \
analogio/AnalogIn.c \
analogio/AnalogOut.c \
audioio/__init__.c \
audioio/AudioOut.c \
digitalio/__init__.c \
digitalio/DigitalInOut.c \
pulseio/__init__.c \
pulseio/PulseIn.c \
pulseio/PulseOut.c \
pulseio/PWMOut.c \
busio/__init__.c \
busio/I2C.c \
busio/SPI.c \
busio/UART.c \
neopixel_write/__init__.c \
time/__init__.c \
touchio/__init__.c \
touchio/TouchIn.c \
usb_hid/__init__.c \
usb_hid/Device.c
# These don't have corresponding files in each port but are still located in
# shared-bindings to make it clear what the contents of the modules are.
SRC_BINDINGS_ENUMS = \
digitalio/Direction.c \
digitalio/DriveMode.c \
digitalio/Pull.c
SRC_COMMON_HAL_EXPANDED = $(addprefix shared-bindings/, $(SRC_COMMON_HAL)) \
$(addprefix shared-bindings/, $(SRC_BINDINGS_ENUMS)) \
$(addprefix common-hal/, $(SRC_COMMON_HAL))
SRC_SHARED_MODULE = \
help.c \
bitbangio/__init__.c \
bitbangio/I2C.c \
bitbangio/OneWire.c \
bitbangio/SPI.c \
busio/OneWire.c \
uheap/__init__.c \
SRC_SHARED_MODULE_EXPANDED = $(addprefix shared-bindings/, $(SRC_SHARED_MODULE)) \
$(addprefix shared-module/, $(SRC_SHARED_MODULE))
OBJ = $(PY_O) $(addprefix $(BUILD)/, $(SRC_C:.c=.o))
OBJ += $(addprefix $(BUILD)/, $(SRC_ASF:.c=.o))
OBJ += $(addprefix $(BUILD)/, $(STM_SRC_C:.c=.o))
OBJ += $(addprefix $(BUILD)/, $(SRC_COMMON_HAL_EXPANDED:.c=.o))
OBJ += $(addprefix $(BUILD)/, $(SRC_SHARED_MODULE_EXPANDED:.c=.o))
SRC_QSTR += $(SRC_C) $(SRC_COMMON_HAL_EXPANDED) $(SRC_SHARED_MODULE_EXPANDED) $(STM_SRC_C)
all: $(BUILD)/firmware.bin $(BUILD)/firmware.uf2
$(BUILD)/firmware.elf: $(OBJ)
$(STEPECHO) "LINK $@"
$(Q)$(CC) -o $@ $(LDFLAGS) $^ -Wl,--start-group $(LIBS) -Wl,--end-group
$(Q)$(SIZE) $@ | python3 ../tools/build_memory_info.py $(LD_FILE)
$(BUILD)/firmware.bin: $(BUILD)/firmware.elf
$(ECHO) "Create $@"
$(Q)$(OBJCOPY) -O binary -j .vectors -j .text -j .data $^ $@
$(BUILD)/firmware.uf2: $(BUILD)/firmware.bin
$(ECHO) "Create $@"
python2 ../tools/uf2/utils/uf2conv.py -c -o $@ $^
deploy: $(BUILD)/firmware.bin
$(ECHO) "Writing $< to the board"
$(BOSSAC) -u $<
# Run emulation build on a POSIX system with suitable terminal settings
run:
stty raw opost -echo
build/firmware.elf
@echo Resetting terminal...
# This sleep is useful to spot segfaults
sleep 1
reset
test: $(BUILD)/firmware.elf
$(Q)/bin/echo -e "print('hello world!', list(x+1 for x in range(10)), end='eol\\\\n')\\r\\n\\x04" | $(BUILD)/firmware.elf | tail -n2 | grep "^hello world! \\[1, 2, 3, 4, 5, 6, 7, 8, 9, 10\\]eol"
include ../py/mkrules.mk
Reference in New Issue View Git Blame Copy Permalink