6446010753
This adds support for CIRCUITPY_WIFI_SSID and CIRCUITPY_WIFI_PASSWORD in `/.env`. When both are defined, CircuitPython will attempt to connect to the network even when user code isn't running. If the user code attempts to a network with the same SSID, it will return immediately. Connecting to another SSID will disconnect from the auto-connected network. If the user code initiates the connection, then it will be shutdown after user code exits. (Should match <8 behavior.) This PR also reworks the default displayio terminal. It now supports a title bar TileGrid in addition to the (newly renamed) scroll area. The default title bar is the top row of the display and is positioned to the right of the Blinka logo when it is enabled. The scroll area is now below the Blinka logo. The Wi-Fi auto-connect code now uses the title bar to show its state including the IP address when connected. It does this through the "standard" OSC control sequence `ESC ] 0 ; <s> ESC \` where <s> is the title bar string. This is commonly supported by terminals so it should work over USB and UART as well. Related to #6174
776 lines
19 KiB
Makefile
776 lines
19 KiB
Makefile
# This file is part of the MicroPython project, http://micropython.org/
|
|
#
|
|
# The MIT License (MIT)
|
|
#
|
|
# SPDX-FileCopyrightText: Copyright (c) 2019 Dan Halbert for Adafruit Industries
|
|
#
|
|
# Permission is hereby granted, free of charge, to any person obtaining a copy
|
|
# of this software and associated documentation files (the "Software"), to deal
|
|
# in the Software without restriction, including without limitation the rights
|
|
# to use, copy, modify, merge, publish, distribute, sublicense, and/or sell
|
|
# copies of the Software, and to permit persons to whom the Software is
|
|
# furnished to do so, subject to the following conditions:
|
|
#
|
|
# The above copyright notice and this permission notice shall be included in
|
|
# all copies or substantial portions of the Software.
|
|
#
|
|
# THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
|
|
# IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
|
|
# FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE
|
|
# AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER
|
|
# LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM,
|
|
# OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN
|
|
# THE SOFTWARE.
|
|
|
|
# Common Makefile definitions that can be shared across CircuitPython ports.
|
|
|
|
###
|
|
# Common compile warnings.
|
|
|
|
BASE_CFLAGS = \
|
|
-fsingle-precision-constant \
|
|
-fno-strict-aliasing \
|
|
-Wdouble-promotion \
|
|
-Wimplicit-fallthrough=2 \
|
|
-Wno-endif-labels \
|
|
-Wstrict-prototypes \
|
|
-Werror-implicit-function-declaration \
|
|
-Wfloat-equal \
|
|
-Wundef \
|
|
-Wshadow \
|
|
-Wwrite-strings \
|
|
-Wsign-compare \
|
|
-Wmissing-format-attribute \
|
|
-Wno-deprecated-declarations \
|
|
-Wnested-externs \
|
|
-Wunreachable-code \
|
|
-Wcast-align \
|
|
-D__$(CHIP_VARIANT)__ \
|
|
-ffunction-sections \
|
|
-fdata-sections \
|
|
-DCIRCUITPY_SOFTWARE_SAFE_MODE=0x0ADABEEF \
|
|
-DCIRCUITPY_CANARY_WORD=0xADAF00 \
|
|
-DCIRCUITPY_SAFE_RESTART_WORD=0xDEADBEEF \
|
|
-DCIRCUITPY_BOARD_ID="\"$(BOARD)\"" \
|
|
--param max-inline-insns-single=500
|
|
|
|
# Use these flags to debug build times and header includes.
|
|
# -ftime-report
|
|
# -H
|
|
|
|
|
|
# Set a global CIRCUITPY_DEBUG flag.
|
|
# Don't just call it "DEBUG": too many libraries use plain DEBUG.
|
|
ifneq ($(DEBUG),)
|
|
CFLAGS += -DCIRCUITPY_DEBUG=$(DEBUG)
|
|
else
|
|
CFLAGS += -DCIRCUITPY_DEBUG=0
|
|
endif
|
|
|
|
CIRCUITPY_LTO ?= 0
|
|
CIRCUITPY_LTO_PARTITION ?= balanced
|
|
ifeq ($(CIRCUITPY_LTO),1)
|
|
CFLAGS += -flto -flto-partition=$(CIRCUITPY_LTO_PARTITION) -DCIRCUITPY_LTO=1
|
|
else
|
|
CFLAGS += -DCIRCUITPY_LTO=0
|
|
endif
|
|
|
|
# Produce an object file for translate.c instead of including it in a header.
|
|
# The header version can be optimized on non-LTO builds *if* inlining is allowed
|
|
# otherwise, it blows up the binary sizes with tons of translate copies.
|
|
CIRCUITPY_TRANSLATE_OBJECT ?= $(CIRCUITPY_LTO)
|
|
CFLAGS += -DCIRCUITPY_TRANSLATE_OBJECT=$(CIRCUITPY_TRANSLATE_OBJECT)
|
|
|
|
###
|
|
# Handle frozen modules.
|
|
|
|
ifneq ($(FROZEN_DIR),)
|
|
# To use frozen source modules, put your .py files in a subdirectory (eg scripts/)
|
|
# and then invoke make with FROZEN_DIR=scripts (be sure to build from scratch).
|
|
CFLAGS += -DMICROPY_MODULE_FROZEN_STR
|
|
endif
|
|
|
|
# To use frozen bytecode, put your .py files in a subdirectory (eg frozen/) and
|
|
# then invoke make with FROZEN_MPY_DIR=frozen or FROZEN_MPY_DIRS="dir1 dir2"
|
|
# (be sure to build from scratch).
|
|
|
|
ifneq ($(FROZEN_MPY_DIRS),)
|
|
CFLAGS += -DMICROPY_QSTR_EXTRA_POOL=mp_qstr_frozen_const_pool
|
|
CFLAGS += -DMICROPY_MODULE_FROZEN_MPY
|
|
endif
|
|
|
|
###
|
|
# Select which builtin modules to compile and include.
|
|
|
|
ifeq ($(CIRCUITPY_AESIO),1)
|
|
SRC_PATTERNS += aesio/%
|
|
endif
|
|
ifeq ($(CIRCUITPY_ALARM),1)
|
|
SRC_PATTERNS += alarm/%
|
|
endif
|
|
ifeq ($(CIRCUITPY_ANALOGIO),1)
|
|
SRC_PATTERNS += analogio/%
|
|
endif
|
|
ifeq ($(CIRCUITPY_ATEXIT),1)
|
|
SRC_PATTERNS += atexit/%
|
|
endif
|
|
ifeq ($(CIRCUITPY_AUDIOBUSIO),1)
|
|
SRC_PATTERNS += audiobusio/%
|
|
endif
|
|
ifeq ($(CIRCUITPY_AUDIOIO),1)
|
|
SRC_PATTERNS += audioio/%
|
|
endif
|
|
ifeq ($(CIRCUITPY_AUDIOPWMIO),1)
|
|
SRC_PATTERNS += audiopwmio/%
|
|
endif
|
|
ifeq ($(CIRCUITPY_AUDIOCORE),1)
|
|
SRC_PATTERNS += audiocore/%
|
|
endif
|
|
ifeq ($(CIRCUITPY_AUDIOMIXER),1)
|
|
SRC_PATTERNS += audiomixer/%
|
|
endif
|
|
ifeq ($(CIRCUITPY_AUDIOMP3),1)
|
|
SRC_PATTERNS += audiomp3/%
|
|
endif
|
|
ifeq ($(CIRCUITPY_BITBANGIO),1)
|
|
SRC_PATTERNS += bitbangio/%
|
|
endif
|
|
# Some builds need bitbang SPI for the dotstar but don't make bitbangio available so include it separately.
|
|
ifeq ($(CIRCUITPY_BITBANG_APA102),1)
|
|
SRC_PATTERNS += bitbangio/SPI%
|
|
endif
|
|
ifeq ($(CIRCUITPY_BITMAPTOOLS),1)
|
|
SRC_PATTERNS += bitmaptools/%
|
|
endif
|
|
ifeq ($(CIRCUITPY_BITOPS),1)
|
|
SRC_PATTERNS += bitops/%
|
|
endif
|
|
ifeq ($(CIRCUITPY_BLEIO),1)
|
|
SRC_PATTERNS += _bleio/%
|
|
endif
|
|
ifeq ($(CIRCUITPY_BOARD),1)
|
|
SRC_PATTERNS += board/%
|
|
endif
|
|
ifeq ($(CIRCUITPY_BUSDEVICE),1)
|
|
SRC_PATTERNS += adafruit_bus_device/%
|
|
endif
|
|
ifeq ($(CIRCUITPY_BUSIO),1)
|
|
SRC_PATTERNS += busio/%
|
|
endif
|
|
ifeq ($(CIRCUITPY_CAMERA),1)
|
|
SRC_PATTERNS += camera/%
|
|
endif
|
|
ifeq ($(CIRCUITPY_CANIO),1)
|
|
SRC_PATTERNS += canio/%
|
|
endif
|
|
ifeq ($(CIRCUITPY_COUNTIO),1)
|
|
SRC_PATTERNS += countio/%
|
|
endif
|
|
ifeq ($(CIRCUITPY_DIGITALIO),1)
|
|
SRC_PATTERNS += digitalio/%
|
|
endif
|
|
ifeq ($(CIRCUITPY_DISPLAYIO),1)
|
|
SRC_PATTERNS += displayio/%
|
|
endif
|
|
ifeq ($(CIRCUITPY_DOTENV),1)
|
|
SRC_PATTERNS += dotenv/%
|
|
endif
|
|
ifeq ($(CIRCUITPY_PARALLELDISPLAY),1)
|
|
SRC_PATTERNS += paralleldisplay/%
|
|
endif
|
|
ifeq ($(CIRCUITPY_VECTORIO),1)
|
|
SRC_PATTERNS += vectorio/%
|
|
endif
|
|
ifeq ($(CIRCUITPY_FLOPPYIO),1)
|
|
SRC_PATTERNS += floppyio/%
|
|
endif
|
|
ifeq ($(CIRCUITPY_FRAMEBUFFERIO),1)
|
|
SRC_PATTERNS += framebufferio/%
|
|
endif
|
|
ifeq ($(CIRCUITPY__EVE),1)
|
|
SRC_PATTERNS += _eve/%
|
|
endif
|
|
ifeq ($(CIRCUITPY_FREQUENCYIO),1)
|
|
SRC_PATTERNS += frequencyio/%
|
|
endif
|
|
|
|
ifeq ($(CIRCUITPY_FUTURE),1)
|
|
SRC_PATTERNS += __future__/%
|
|
endif
|
|
|
|
ifeq ($(CIRCUITPY_GETPASS),1)
|
|
SRC_PATTERNS += getpass/%
|
|
endif
|
|
ifeq ($(CIRCUITPY_GIFIO),1)
|
|
SRC_PATTERNS += gifio/%
|
|
endif
|
|
ifeq ($(CIRCUITPY_GNSS),1)
|
|
SRC_PATTERNS += gnss/%
|
|
endif
|
|
ifeq ($(CIRCUITPY_I2CPERIPHERAL),1)
|
|
SRC_PATTERNS += i2cperipheral/%
|
|
endif
|
|
ifeq ($(CIRCUITPY_IMAGECAPTURE),1)
|
|
SRC_PATTERNS += imagecapture/%
|
|
endif
|
|
ifeq ($(CIRCUITPY_IPADDRESS),1)
|
|
SRC_PATTERNS += ipaddress/%
|
|
endif
|
|
ifeq ($(CIRCUITPY_IS31FL3741),1)
|
|
SRC_PATTERNS += is31fl3741/%
|
|
endif
|
|
ifeq ($(CIRCUITPY_KEYPAD),1)
|
|
SRC_PATTERNS += keypad/%
|
|
endif
|
|
ifeq ($(CIRCUITPY_MATH),1)
|
|
SRC_PATTERNS += math/%
|
|
endif
|
|
ifeq ($(CIRCUITPY_MEMORYMONITOR),1)
|
|
SRC_PATTERNS += memorymonitor/%
|
|
endif
|
|
ifeq ($(CIRCUITPY_MICROCONTROLLER),1)
|
|
SRC_PATTERNS += microcontroller/%
|
|
endif
|
|
ifeq ($(CIRCUITPY_MDNS),1)
|
|
SRC_PATTERNS += mdns/%
|
|
endif
|
|
ifeq ($(CIRCUITPY_NEOPIXEL_WRITE),1)
|
|
SRC_PATTERNS += neopixel_write/%
|
|
endif
|
|
ifeq ($(CIRCUITPY_NVM),1)
|
|
SRC_PATTERNS += nvm/%
|
|
endif
|
|
ifeq ($(CIRCUITPY_ONEWIREIO),1)
|
|
SRC_PATTERNS += onewireio/%
|
|
endif
|
|
ifeq ($(CIRCUITPY_OS),1)
|
|
SRC_PATTERNS += os/%
|
|
endif
|
|
ifeq ($(CIRCUITPY_DUALBANK),1)
|
|
SRC_PATTERNS += dualbank/%
|
|
endif
|
|
ifeq ($(CIRCUITPY_PIXELBUF),1)
|
|
SRC_PATTERNS += adafruit_pixelbuf/%
|
|
endif
|
|
ifeq ($(CIRCUITPY_QRIO),1)
|
|
SRC_PATTERNS += qrio/%
|
|
endif
|
|
ifeq ($(CIRCUITPY_RAINBOWIO),1)
|
|
SRC_PATTERNS += rainbowio/%
|
|
endif
|
|
ifeq ($(CIRCUITPY_RGBMATRIX),1)
|
|
SRC_PATTERNS += rgbmatrix/%
|
|
endif
|
|
ifeq ($(CIRCUITPY_PS2IO),1)
|
|
SRC_PATTERNS += ps2io/%
|
|
endif
|
|
ifeq ($(CIRCUITPY_PULSEIO),1)
|
|
SRC_PATTERNS += pulseio/%
|
|
endif
|
|
ifeq ($(CIRCUITPY_PWMIO),1)
|
|
SRC_PATTERNS += pwmio/%
|
|
endif
|
|
ifeq ($(CIRCUITPY_RANDOM),1)
|
|
SRC_PATTERNS += random/%
|
|
endif
|
|
ifeq ($(CIRCUITPY_RP2PIO),1)
|
|
SRC_PATTERNS += rp2pio/%
|
|
endif
|
|
ifeq ($(CIRCUITPY_ROTARYIO),1)
|
|
SRC_PATTERNS += rotaryio/%
|
|
endif
|
|
ifeq ($(CIRCUITPY_RTC),1)
|
|
SRC_PATTERNS += rtc/%
|
|
endif
|
|
ifeq ($(CIRCUITPY_SAMD),1)
|
|
SRC_PATTERNS += samd/%
|
|
endif
|
|
ifeq ($(CIRCUITPY_SDCARDIO),1)
|
|
SRC_PATTERNS += sdcardio/%
|
|
endif
|
|
ifeq ($(CIRCUITPY_SDIOIO),1)
|
|
SRC_PATTERNS += sdioio/%
|
|
endif
|
|
ifeq ($(CIRCUITPY_SHARPDISPLAY),1)
|
|
SRC_PATTERNS += sharpdisplay/%
|
|
endif
|
|
ifeq ($(CIRCUITPY_SOCKETPOOL),1)
|
|
SRC_PATTERNS += socketpool/%
|
|
endif
|
|
ifeq ($(CIRCUITPY_SSL),1)
|
|
SRC_PATTERNS += ssl/%
|
|
endif
|
|
ifeq ($(CIRCUITPY_STAGE),1)
|
|
SRC_PATTERNS += _stage/%
|
|
endif
|
|
ifeq ($(CIRCUITPY_STORAGE),1)
|
|
SRC_PATTERNS += storage/%
|
|
endif
|
|
ifeq ($(CIRCUITPY_STRUCT),1)
|
|
SRC_PATTERNS += struct/%
|
|
endif
|
|
ifeq ($(CIRCUITPY_SUPERVISOR),1)
|
|
SRC_PATTERNS += supervisor/%
|
|
endif
|
|
ifeq ($(CIRCUITPY_SYNTHIO),1)
|
|
SRC_PATTERNS += synthio/%
|
|
endif
|
|
ifeq ($(CIRCUITPY_TERMINALIO),1)
|
|
SRC_PATTERNS += terminalio/% fontio/%
|
|
endif
|
|
ifeq ($(CIRCUITPY_TIME),1)
|
|
SRC_PATTERNS += time/%
|
|
endif
|
|
ifeq ($(CIRCUITPY_TOUCHIO),1)
|
|
SRC_PATTERNS += touchio/%
|
|
endif
|
|
ifeq ($(CIRCUITPY_TRACEBACK),1)
|
|
SRC_PATTERNS += traceback/%
|
|
endif
|
|
ifeq ($(CIRCUITPY_UHEAP),1)
|
|
SRC_PATTERNS += uheap/%
|
|
endif
|
|
ifeq ($(CIRCUITPY_USB_CDC),1)
|
|
SRC_PATTERNS += usb_cdc/%
|
|
endif
|
|
ifeq ($(CIRCUITPY_USB_HID),1)
|
|
SRC_PATTERNS += usb_hid/%
|
|
endif
|
|
ifeq ($(CIRCUITPY_USB_HOST),1)
|
|
SRC_PATTERNS += usb_host/% usb/%
|
|
endif
|
|
ifeq ($(CIRCUITPY_USB_MIDI),1)
|
|
SRC_PATTERNS += usb_midi/%
|
|
endif
|
|
ifeq ($(CIRCUITPY_USB_VENDOR),1)
|
|
SRC_PATTERNS += usb_vendor/%
|
|
endif
|
|
ifeq ($(CIRCUITPY_USTACK),1)
|
|
SRC_PATTERNS += ustack/%
|
|
endif
|
|
ifeq ($(CIRCUITPY_ZLIB),1)
|
|
SRC_PATTERNS += zlib/%
|
|
endif
|
|
ifeq ($(CIRCUITPY_VIDEOCORE),1)
|
|
SRC_PATTERNS += videocore/%
|
|
endif
|
|
ifeq ($(CIRCUITPY_WATCHDOG),1)
|
|
SRC_PATTERNS += watchdog/%
|
|
endif
|
|
ifeq ($(CIRCUITPY_WIFI),1)
|
|
SRC_PATTERNS += wifi/%
|
|
endif
|
|
ifeq ($(CIRCUITPY_PEW),1)
|
|
SRC_PATTERNS += _pew/%
|
|
endif
|
|
ifeq ($(CIRCUITPY_MSGPACK),1)
|
|
SRC_PATTERNS += msgpack/%
|
|
endif
|
|
|
|
# All possible sources are listed here, and are filtered by SRC_PATTERNS in SRC_COMMON_HAL
|
|
SRC_COMMON_HAL_ALL = \
|
|
_bleio/Adapter.c \
|
|
_bleio/Attribute.c \
|
|
_bleio/Characteristic.c \
|
|
_bleio/CharacteristicBuffer.c \
|
|
_bleio/Connection.c \
|
|
_bleio/Descriptor.c \
|
|
_bleio/PacketBuffer.c \
|
|
_bleio/Service.c \
|
|
_bleio/UUID.c \
|
|
_bleio/__init__.c \
|
|
_pew/PewPew.c \
|
|
_pew/__init__.c \
|
|
alarm/SleepMemory.c \
|
|
alarm/__init__.c \
|
|
alarm/pin/PinAlarm.c \
|
|
alarm/time/TimeAlarm.c \
|
|
alarm/touch/TouchAlarm.c \
|
|
analogio/AnalogIn.c \
|
|
analogio/AnalogOut.c \
|
|
analogio/__init__.c \
|
|
audiobusio/I2SOut.c \
|
|
audiobusio/PDMIn.c \
|
|
audiobusio/__init__.c \
|
|
audioio/AudioOut.c \
|
|
audioio/__init__.c \
|
|
audiopwmio/PWMAudioOut.c \
|
|
audiopwmio/__init__.c \
|
|
board/__init__.c \
|
|
busio/I2C.c \
|
|
busio/SPI.c \
|
|
busio/UART.c \
|
|
busio/__init__.c \
|
|
camera/__init__.c \
|
|
camera/Camera.c \
|
|
canio/CAN.c \
|
|
canio/Listener.c \
|
|
canio/__init__.c \
|
|
countio/Counter.c \
|
|
countio/__init__.c \
|
|
digitalio/DigitalInOut.c \
|
|
digitalio/__init__.c \
|
|
dualbank/__init__.c \
|
|
frequencyio/FrequencyIn.c \
|
|
frequencyio/__init__.c \
|
|
imagecapture/ParallelImageCapture.c \
|
|
imagecapture/__init__.c \
|
|
gnss/__init__.c \
|
|
gnss/GNSS.c \
|
|
gnss/PositionFix.c \
|
|
gnss/SatelliteSystem.c \
|
|
i2cperipheral/I2CPeripheral.c \
|
|
i2cperipheral/__init__.c \
|
|
microcontroller/Pin.c \
|
|
microcontroller/Processor.c \
|
|
microcontroller/__init__.c \
|
|
mdns/__init__.c \
|
|
mdns/Server.c \
|
|
mdns/RemoteService.c \
|
|
neopixel_write/__init__.c \
|
|
nvm/ByteArray.c \
|
|
nvm/__init__.c \
|
|
os/__init__.c \
|
|
paralleldisplay/ParallelBus.c \
|
|
ps2io/Ps2.c \
|
|
ps2io/__init__.c \
|
|
pulseio/PulseIn.c \
|
|
pulseio/PulseOut.c \
|
|
pulseio/__init__.c \
|
|
pwmio/PWMOut.c \
|
|
pwmio/__init__.c \
|
|
rgbmatrix/RGBMatrix.c \
|
|
rgbmatrix/__init__.c \
|
|
rotaryio/IncrementalEncoder.c \
|
|
rotaryio/__init__.c \
|
|
rtc/RTC.c \
|
|
rtc/__init__.c \
|
|
sdioio/SDCard.c \
|
|
sdioio/__init__.c \
|
|
socketpool/__init__.c \
|
|
socketpool/SocketPool.c \
|
|
socketpool/Socket.c \
|
|
ssl/__init__.c \
|
|
ssl/SSLContext.c \
|
|
ssl/SSLSocket.c \
|
|
supervisor/Runtime.c \
|
|
supervisor/__init__.c \
|
|
usb_host/__init__.c \
|
|
usb_host/Port.c \
|
|
watchdog/WatchDogMode.c \
|
|
watchdog/WatchDogTimer.c \
|
|
watchdog/__init__.c \
|
|
wifi/Monitor.c \
|
|
wifi/Network.c \
|
|
wifi/Radio.c \
|
|
wifi/ScannedNetworks.c \
|
|
wifi/__init__.c \
|
|
|
|
ifeq ($(CIRCUITPY_BLEIO_HCI),1)
|
|
# Helper code for _bleio HCI.
|
|
SRC_C += \
|
|
common-hal/_bleio/att.c \
|
|
common-hal/_bleio/hci.c \
|
|
|
|
endif
|
|
|
|
|
|
SRC_COMMON_HAL = $(filter $(SRC_PATTERNS), $(SRC_COMMON_HAL_ALL))
|
|
|
|
# These don't have corresponding files in each port but are still located in
|
|
# shared-bindings to make it clear what the contents of the modules are.
|
|
# All possible sources are listed here, and are filtered by SRC_PATTERNS.
|
|
SRC_BINDINGS_ENUMS = \
|
|
$(filter $(SRC_PATTERNS), \
|
|
_bleio/Address.c \
|
|
_bleio/Attribute.c \
|
|
_bleio/ScanEntry.c \
|
|
_eve/__init__.c \
|
|
__future__/__init__.c \
|
|
camera/ImageFormat.c \
|
|
canio/Match.c \
|
|
countio/Edge.c \
|
|
digitalio/Direction.c \
|
|
digitalio/DriveMode.c \
|
|
digitalio/Pull.c \
|
|
displayio/Colorspace.c \
|
|
fontio/Glyph.c \
|
|
imagecapture/ParallelImageCapture.c \
|
|
math/__init__.c \
|
|
microcontroller/ResetReason.c \
|
|
microcontroller/RunMode.c \
|
|
msgpack/__init__.c \
|
|
msgpack/ExtType.c \
|
|
paralleldisplay/__init__.c \
|
|
paralleldisplay/ParallelBus.c \
|
|
qrio/PixelPolicy.c \
|
|
qrio/QRInfo.c \
|
|
supervisor/RunReason.c \
|
|
wifi/AuthMode.c \
|
|
wifi/Packet.c \
|
|
)
|
|
|
|
SRC_BINDINGS_ENUMS += \
|
|
util.c
|
|
|
|
SRC_SHARED_MODULE_ALL = \
|
|
_bleio/Address.c \
|
|
_bleio/Attribute.c \
|
|
_bleio/ScanEntry.c \
|
|
_bleio/ScanResults.c \
|
|
_eve/__init__.c \
|
|
adafruit_pixelbuf/PixelBuf.c \
|
|
adafruit_pixelbuf/__init__.c \
|
|
_stage/Layer.c \
|
|
_stage/Text.c \
|
|
_stage/__init__.c \
|
|
aesio/__init__.c \
|
|
aesio/aes.c \
|
|
atexit/__init__.c \
|
|
audiocore/RawSample.c \
|
|
audiocore/WaveFile.c \
|
|
audiocore/__init__.c \
|
|
audioio/__init__.c \
|
|
audiomixer/Mixer.c \
|
|
audiomixer/MixerVoice.c \
|
|
audiomixer/__init__.c \
|
|
audiomp3/MP3Decoder.c \
|
|
audiomp3/__init__.c \
|
|
audiopwmio/__init__.c \
|
|
bitbangio/I2C.c \
|
|
bitbangio/SPI.c \
|
|
bitbangio/__init__.c \
|
|
bitmaptools/__init__.c \
|
|
bitops/__init__.c \
|
|
board/__init__.c \
|
|
adafruit_bus_device/__init__.c \
|
|
adafruit_bus_device/i2c_device/I2CDevice.c \
|
|
adafruit_bus_device/spi_device/SPIDevice.c \
|
|
canio/Match.c \
|
|
canio/Message.c \
|
|
canio/RemoteTransmissionRequest.c \
|
|
displayio/Bitmap.c \
|
|
displayio/ColorConverter.c \
|
|
displayio/Display.c \
|
|
displayio/EPaperDisplay.c \
|
|
displayio/FourWire.c \
|
|
displayio/Group.c \
|
|
displayio/I2CDisplay.c \
|
|
displayio/OnDiskBitmap.c \
|
|
displayio/Palette.c \
|
|
displayio/Shape.c \
|
|
displayio/TileGrid.c \
|
|
displayio/area.c \
|
|
displayio/__init__.c \
|
|
dotenv/__init__.c \
|
|
floppyio/__init__.c \
|
|
fontio/BuiltinFont.c \
|
|
fontio/__init__.c \
|
|
framebufferio/FramebufferDisplay.c \
|
|
framebufferio/__init__.c \
|
|
getpass/__init__.c \
|
|
gifio/__init__.c \
|
|
gifio/GifWriter.c \
|
|
imagecapture/ParallelImageCapture.c \
|
|
ipaddress/IPv4Address.c \
|
|
ipaddress/__init__.c \
|
|
is31fl3741/IS31FL3741.c \
|
|
is31fl3741/FrameBuffer.c \
|
|
is31fl3741/__init__.c \
|
|
keypad/__init__.c \
|
|
keypad/Event.c \
|
|
keypad/EventQueue.c \
|
|
keypad/KeyMatrix.c \
|
|
keypad/ShiftRegisterKeys.c \
|
|
keypad/Keys.c \
|
|
memorymonitor/__init__.c \
|
|
memorymonitor/AllocationAlarm.c \
|
|
memorymonitor/AllocationSize.c \
|
|
network/__init__.c \
|
|
msgpack/__init__.c \
|
|
onewireio/__init__.c \
|
|
onewireio/OneWire.c \
|
|
os/__init__.c \
|
|
paralleldisplay/ParallelBus.c \
|
|
qrio/__init__.c \
|
|
qrio/QRDecoder.c \
|
|
rainbowio/__init__.c \
|
|
random/__init__.c \
|
|
rgbmatrix/RGBMatrix.c \
|
|
rgbmatrix/__init__.c \
|
|
rotaryio/IncrementalEncoder.c \
|
|
sdcardio/SDCard.c \
|
|
sdcardio/__init__.c \
|
|
sharpdisplay/SharpMemoryFramebuffer.c \
|
|
sharpdisplay/__init__.c \
|
|
socket/__init__.c \
|
|
storage/__init__.c \
|
|
struct/__init__.c \
|
|
synthio/MidiTrack.c \
|
|
synthio/__init__.c \
|
|
terminalio/Terminal.c \
|
|
terminalio/__init__.c \
|
|
time/__init__.c \
|
|
traceback/__init__.c \
|
|
uheap/__init__.c \
|
|
usb/__init__.c \
|
|
usb/core/__init__.c \
|
|
usb/core/Device.c \
|
|
ustack/__init__.c \
|
|
zlib/__init__.c \
|
|
vectorio/Circle.c \
|
|
vectorio/Polygon.c \
|
|
vectorio/Rectangle.c \
|
|
vectorio/VectorShape.c \
|
|
vectorio/__init__.c \
|
|
|
|
# All possible sources are listed here, and are filtered by SRC_PATTERNS.
|
|
SRC_SHARED_MODULE = $(filter $(SRC_PATTERNS), $(SRC_SHARED_MODULE_ALL))
|
|
|
|
# Use the native touchio if requested. This flag is set conditionally in, say, mpconfigport.h.
|
|
# The presence of common-hal/touchio/* does not imply it's available for all chips in a port,
|
|
# so there is an explicit flag. For example, SAMD21 touchio is native, but SAMD51 is not.
|
|
ifeq ($(CIRCUITPY_TOUCHIO_USE_NATIVE),1)
|
|
SRC_COMMON_HAL_ALL += \
|
|
touchio/TouchIn.c \
|
|
touchio/__init__.c
|
|
else
|
|
SRC_SHARED_MODULE_ALL += \
|
|
touchio/TouchIn.c \
|
|
touchio/__init__.c
|
|
endif
|
|
|
|
# If supporting _bleio via HCI, make devices/ble_hci/common-hal/_bleio be includable,
|
|
# and use C source files in devices/ble_hci/common-hal.
|
|
ifeq ($(CIRCUITPY_BLEIO_HCI),1)
|
|
INC += -I$(TOP)/devices/ble_hci
|
|
DEVICES_MODULES += $(TOP)/devices/ble_hci
|
|
endif
|
|
|
|
ifeq ($(CIRCUITPY_AUDIOMP3),1)
|
|
SRC_MOD += $(addprefix lib/mp3/src/, \
|
|
bitstream.c \
|
|
buffers.c \
|
|
dct32.c \
|
|
dequant.c \
|
|
dqchan.c \
|
|
huffman.c \
|
|
hufftabs.c \
|
|
imdct.c \
|
|
mp3dec.c \
|
|
mp3tabs.c \
|
|
polyphase.c \
|
|
scalfact.c \
|
|
stproc.c \
|
|
subband.c \
|
|
trigtabs.c \
|
|
)
|
|
$(BUILD)/lib/mp3/src/buffers.o: CFLAGS += -include "py/misc.h" -D'MPDEC_ALLOCATOR(x)=m_malloc(x,0)' -D'MPDEC_FREE(x)=m_free(x)'
|
|
endif
|
|
ifeq ($(CIRCUITPY_RGBMATRIX),1)
|
|
SRC_MOD += $(addprefix lib/protomatter/src/, \
|
|
core.c \
|
|
)
|
|
$(BUILD)/lib/protomatter/src/core.o: CFLAGS += -include "shared-module/rgbmatrix/allocator.h" -DCIRCUITPY -Wno-missing-braces -Wno-missing-prototypes
|
|
endif
|
|
|
|
ifeq ($(CIRCUITPY_ZLIB),1)
|
|
SRC_MOD += $(addprefix lib/uzlib/, \
|
|
tinflate.c \
|
|
tinfzlib.c \
|
|
tinfgzip.c \
|
|
adler32.c \
|
|
crc32.c \
|
|
)
|
|
$(BUILD)/lib/uzlib/tinflate.o: CFLAGS += -Wno-missing-braces -Wno-missing-prototypes
|
|
endif
|
|
|
|
# All possible sources are listed here, and are filtered by SRC_PATTERNS.
|
|
SRC_SHARED_MODULE_INTERNAL = \
|
|
$(filter $(SRC_PATTERNS), \
|
|
displayio/display_core.c \
|
|
usb/utf16le.c \
|
|
)
|
|
|
|
SRC_COMMON_HAL_INTERNAL = \
|
|
$(filter $(SRC_PATTERNS), \
|
|
_bleio/ \
|
|
)
|
|
|
|
ifeq ($(INTERNAL_LIBM),1)
|
|
SRC_LIBM = \
|
|
$(addprefix lib/,\
|
|
libm/math.c \
|
|
libm/roundf.c \
|
|
libm/fmodf.c \
|
|
libm/nearbyintf.c \
|
|
libm/ef_sqrt.c \
|
|
libm/kf_rem_pio2.c \
|
|
libm/kf_sin.c \
|
|
libm/kf_cos.c \
|
|
libm/kf_tan.c \
|
|
libm/ef_rem_pio2.c \
|
|
libm/sf_sin.c \
|
|
libm/sf_cos.c \
|
|
libm/sf_tan.c \
|
|
libm/sf_frexp.c \
|
|
libm/sf_modf.c \
|
|
libm/sf_ldexp.c \
|
|
libm/asinfacosf.c \
|
|
libm/atanf.c \
|
|
libm/atan2f.c \
|
|
)
|
|
ifeq ($(CIRCUITPY_ULAB),1)
|
|
SRC_LIBM += \
|
|
$(addprefix lib/,\
|
|
libm/acoshf.c \
|
|
libm/asinhf.c \
|
|
libm/atanhf.c \
|
|
libm/erf_lgamma.c \
|
|
libm/log1pf.c \
|
|
libm/sf_erf.c \
|
|
libm/wf_lgamma.c \
|
|
libm/wf_tgamma.c \
|
|
)
|
|
endif
|
|
$(patsubst %.c,$(BUILD)/%.o,$(SRC_LIBM)): CFLAGS += -Wno-missing-prototypes
|
|
endif
|
|
|
|
SRC_CIRCUITPY_COMMON = \
|
|
shared/libc/string0.c \
|
|
shared/readline/readline.c \
|
|
lib/oofatfs/ff.c \
|
|
lib/oofatfs/ffunicode.c \
|
|
shared/timeutils/timeutils.c \
|
|
shared/runtime/buffer_helper.c \
|
|
shared/runtime/context_manager_helpers.c \
|
|
shared/runtime/interrupt_char.c \
|
|
shared/runtime/pyexec.c \
|
|
shared/runtime/stdout_helpers.c \
|
|
shared/runtime/sys_stdio_mphal.c
|
|
|
|
ifeq ($(CIRCUITPY_QRIO),1)
|
|
SRC_CIRCUITPY_COMMON += lib/quirc/lib/decode.c lib/quirc/lib/identify.c lib/quirc/lib/quirc.c lib/quirc/lib/version_db.c
|
|
$(BUILD)/lib/quirc/lib/%.o: CFLAGS += -Wno-shadow -Wno-sign-compare -include shared-module/qrio/quirc_alloc.h
|
|
endif
|
|
|
|
ifdef LD_TEMPLATE_FILE
|
|
# Generate a linker script (.ld file) from a template, for those builds that use it.
|
|
GENERATED_LD_FILE = $(BUILD)/$(notdir $(patsubst %.template.ld,%.ld,$(LD_TEMPLATE_FILE)))
|
|
#
|
|
# ld_defines.pp is generated from ld_defines.c. See py/mkrules.mk.
|
|
# Run gen_ld_files.py over ALL *.template.ld files, not just LD_TEMPLATE_FILE,
|
|
# because it may include other template files.
|
|
$(GENERATED_LD_FILE): $(BUILD)/ld_defines.pp boards/*.template.ld
|
|
$(STEPECHO) "GEN $@"
|
|
$(Q)$(PYTHON) $(TOP)/tools/gen_ld_files.py --defines $< --out_dir $(BUILD) boards/*.template.ld
|
|
endif
|
|
|
|
.PHONY: check-release-needs-clean-build
|
|
|
|
check-release-needs-clean-build:
|
|
@echo "RELEASE_NEEDS_CLEAN_BUILD = $(RELEASE_NEEDS_CLEAN_BUILD)"
|
|
|
|
# Ignore these errors
|
|
$(BUILD)/lib/libm/kf_rem_pio2.o: CFLAGS += -Wno-maybe-uninitialized
|