circuitpython/stm/stmusbh/usbh_def.h

289 lines
11 KiB
C

/**
******************************************************************************
* @file usbh_def.h
* @author MCD Application Team
* @version V2.1.0
* @date 19-March-2012
* @brief Definitions used in the USB host library
******************************************************************************
* @attention
*
* <h2><center>&copy; COPYRIGHT 2012 STMicroelectronics</center></h2>
*
* Licensed under MCD-ST Liberty SW License Agreement V2, (the "License");
* You may not use this file except in compliance with the License.
* You may obtain a copy of the License at:
*
* http://www.st.com/software_license_agreement_liberty_v2
*
* Unless required by applicable law or agreed to in writing, software
* distributed under the License is distributed on an "AS IS" BASIS,
* WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
* See the License for the specific language governing permissions and
* limitations under the License.
*
******************************************************************************
*/
/** @addtogroup USBH_LIB
* @{
*/
/** @addtogroup USBH_LIB_CORE
* @{
*/
/** @defgroup USBH_DEF
* @brief This file is includes USB descriptors
* @{
*/
#ifndef USBH_DEF_H
#define USBH_DEF_H
#ifndef USBH_NULL
#define USBH_NULL ((void *)0)
#endif
#ifndef FALSE
#define FALSE 0
#endif
#ifndef TRUE
#define TRUE 1
#endif
#define ValBit(VAR,POS) (VAR & (1 << POS))
#define SetBit(VAR,POS) (VAR |= (1 << POS))
#define ClrBit(VAR,POS) (VAR &= ((1 << POS)^255))
#define LE16(addr) (((u16)(*((u8 *)(addr))))\
+ (((u16)(*(((u8 *)(addr)) + 1))) << 8))
#define USB_LEN_DESC_HDR 0x02
#define USB_LEN_DEV_DESC 0x12
#define USB_LEN_CFG_DESC 0x09
#define USB_LEN_IF_DESC 0x09
#define USB_LEN_EP_DESC 0x07
#define USB_LEN_OTG_DESC 0x03
#define USB_LEN_SETUP_PKT 0x08
/* bmRequestType :D7 Data Phase Transfer Direction */
#define USB_REQ_DIR_MASK 0x80
#define USB_H2D 0x00
#define USB_D2H 0x80
/* bmRequestType D6..5 Type */
#define USB_REQ_TYPE_STANDARD 0x00
#define USB_REQ_TYPE_CLASS 0x20
#define USB_REQ_TYPE_VENDOR 0x40
#define USB_REQ_TYPE_RESERVED 0x60
/* bmRequestType D4..0 Recipient */
#define USB_REQ_RECIPIENT_DEVICE 0x00
#define USB_REQ_RECIPIENT_INTERFACE 0x01
#define USB_REQ_RECIPIENT_ENDPOINT 0x02
#define USB_REQ_RECIPIENT_OTHER 0x03
/* Table 9-4. Standard Request Codes */
/* bRequest , Value */
#define USB_REQ_GET_STATUS 0x00
#define USB_REQ_CLEAR_FEATURE 0x01
#define USB_REQ_SET_FEATURE 0x03
#define USB_REQ_SET_ADDRESS 0x05
#define USB_REQ_GET_DESCRIPTOR 0x06
#define USB_REQ_SET_DESCRIPTOR 0x07
#define USB_REQ_GET_CONFIGURATION 0x08
#define USB_REQ_SET_CONFIGURATION 0x09
#define USB_REQ_GET_INTERFACE 0x0A
#define USB_REQ_SET_INTERFACE 0x0B
#define USB_REQ_SYNCH_FRAME 0x0C
/* Table 9-5. Descriptor Types of USB Specifications */
#define USB_DESC_TYPE_DEVICE 1
#define USB_DESC_TYPE_CONFIGURATION 2
#define USB_DESC_TYPE_STRING 3
#define USB_DESC_TYPE_INTERFACE 4
#define USB_DESC_TYPE_ENDPOINT 5
#define USB_DESC_TYPE_DEVICE_QUALIFIER 6
#define USB_DESC_TYPE_OTHER_SPEED_CONFIGURATION 7
#define USB_DESC_TYPE_INTERFACE_POWER 8
#define USB_DESC_TYPE_HID 0x21
#define USB_DESC_TYPE_HID_REPORT 0x22
#define USB_DEVICE_DESC_SIZE 18
#define USB_CONFIGURATION_DESC_SIZE 9
#define USB_HID_DESC_SIZE 9
#define USB_INTERFACE_DESC_SIZE 9
#define USB_ENDPOINT_DESC_SIZE 7
/* Descriptor Type and Descriptor Index */
/* Use the following values when calling the function USBH_GetDescriptor */
#define USB_DESC_DEVICE ((USB_DESC_TYPE_DEVICE << 8) & 0xFF00)
#define USB_DESC_CONFIGURATION ((USB_DESC_TYPE_CONFIGURATION << 8) & 0xFF00)
#define USB_DESC_STRING ((USB_DESC_TYPE_STRING << 8) & 0xFF00)
#define USB_DESC_INTERFACE ((USB_DESC_TYPE_INTERFACE << 8) & 0xFF00)
#define USB_DESC_ENDPOINT ((USB_DESC_TYPE_INTERFACE << 8) & 0xFF00)
#define USB_DESC_DEVICE_QUALIFIER ((USB_DESC_TYPE_DEVICE_QUALIFIER << 8) & 0xFF00)
#define USB_DESC_OTHER_SPEED_CONFIGURATION ((USB_DESC_TYPE_OTHER_SPEED_CONFIGURATION << 8) & 0xFF00)
#define USB_DESC_INTERFACE_POWER ((USB_DESC_TYPE_INTERFACE_POWER << 8) & 0xFF00)
#define USB_DESC_HID_REPORT ((USB_DESC_TYPE_HID_REPORT << 8) & 0xFF00)
#define USB_DESC_HID ((USB_DESC_TYPE_HID << 8) & 0xFF00)
#define USB_EP_TYPE_CTRL 0x00
#define USB_EP_TYPE_ISOC 0x01
#define USB_EP_TYPE_BULK 0x02
#define USB_EP_TYPE_INTR 0x03
#define USB_EP_DIR_OUT 0x00
#define USB_EP_DIR_IN 0x80
#define USB_EP_DIR_MSK 0x80
/* supported classes */
#define USB_MSC_CLASS 0x08
#define USB_HID_CLASS 0x03
/* Interface Descriptor field values for HID Boot Protocol */
#define HID_BOOT_CODE 0x01
#define HID_KEYBRD_BOOT_CODE 0x01
#define HID_MOUSE_BOOT_CODE 0x02
/* As per USB specs 9.2.6.4 :Standard request with data request timeout: 5sec
Standard request with no data stage timeout : 50ms */
#define DATA_STAGE_TIMEOUT 5000
#define NODATA_STAGE_TIMEOUT 50
/**
* @}
*/
#define USBH_CONFIGURATION_DESCRIPTOR_SIZE (USB_CONFIGURATION_DESC_SIZE \
+ USB_INTERFACE_DESC_SIZE\
+ (USBH_MAX_NUM_ENDPOINTS * USB_ENDPOINT_DESC_SIZE))
#define CONFIG_DESC_wTOTAL_LENGTH (ConfigurationDescriptorData.ConfigDescfield.\
ConfigurationDescriptor.wTotalLength)
/* This Union is copied from usb_core.h */
typedef union
{
uint16_t w;
struct BW
{
uint8_t msb;
uint8_t lsb;
}
bw;
}
uint16_t_uint8_t;
typedef union _USB_Setup
{
uint8_t d8[8];
struct _SetupPkt_Struc
{
uint8_t bmRequestType;
uint8_t bRequest;
uint16_t_uint8_t wValue;
uint16_t_uint8_t wIndex;
uint16_t_uint8_t wLength;
} b;
}
USB_Setup_TypeDef;
typedef struct _DescHeader
{
uint8_t bLength;
uint8_t bDescriptorType;
}
USBH_DescHeader_t;
typedef struct _DeviceDescriptor
{
uint8_t bLength;
uint8_t bDescriptorType;
uint16_t bcdUSB; /* USB Specification Number which device complies too */
uint8_t bDeviceClass;
uint8_t bDeviceSubClass;
uint8_t bDeviceProtocol;
/* If equal to Zero, each interface specifies its own class
code if equal to 0xFF, the class code is vendor specified.
Otherwise field is valid Class Code.*/
uint8_t bMaxPacketSize;
uint16_t idVendor; /* Vendor ID (Assigned by USB Org) */
uint16_t idProduct; /* Product ID (Assigned by Manufacturer) */
uint16_t bcdDevice; /* Device Release Number */
uint8_t iManufacturer; /* Index of Manufacturer String Descriptor */
uint8_t iProduct; /* Index of Product String Descriptor */
uint8_t iSerialNumber; /* Index of Serial Number String Descriptor */
uint8_t bNumConfigurations; /* Number of Possible Configurations */
}
USBH_DevDesc_TypeDef;
typedef struct _ConfigurationDescriptor
{
uint8_t bLength;
uint8_t bDescriptorType;
uint16_t wTotalLength; /* Total Length of Data Returned */
uint8_t bNumInterfaces; /* Number of Interfaces */
uint8_t bConfigurationValue; /* Value to use as an argument to select this configuration*/
uint8_t iConfiguration; /*Index of String Descriptor Describing this configuration */
uint8_t bmAttributes; /* D7 Bus Powered , D6 Self Powered, D5 Remote Wakeup , D4..0 Reserved (0)*/
uint8_t bMaxPower; /*Maximum Power Consumption */
}
USBH_CfgDesc_TypeDef;
typedef struct _HIDDescriptor
{
uint8_t bLength;
uint8_t bDescriptorType;
uint16_t bcdHID; /* indicates what endpoint this descriptor is describing */
uint8_t bCountryCode; /* specifies the transfer type. */
uint8_t bNumDescriptors; /* specifies the transfer type. */
uint8_t bReportDescriptorType; /* Maximum Packet Size this endpoint is capable of sending or receiving */
uint16_t wItemLength; /* is used to specify the polling interval of certain transfers. */
}
USBH_HIDDesc_TypeDef;
typedef struct _InterfaceDescriptor
{
uint8_t bLength;
uint8_t bDescriptorType;
uint8_t bInterfaceNumber;
uint8_t bAlternateSetting; /* Value used to select alternative setting */
uint8_t bNumEndpoints; /* Number of Endpoints used for this interface */
uint8_t bInterfaceClass; /* Class Code (Assigned by USB Org) */
uint8_t bInterfaceSubClass; /* Subclass Code (Assigned by USB Org) */
uint8_t bInterfaceProtocol; /* Protocol Code */
uint8_t iInterface; /* Index of String Descriptor Describing this interface */
}
USBH_InterfaceDesc_TypeDef;
typedef struct _EndpointDescriptor
{
uint8_t bLength;
uint8_t bDescriptorType;
uint8_t bEndpointAddress; /* indicates what endpoint this descriptor is describing */
uint8_t bmAttributes; /* specifies the transfer type. */
uint16_t wMaxPacketSize; /* Maximum Packet Size this endpoint is capable of sending or receiving */
uint8_t bInterval; /* is used to specify the polling interval of certain transfers. */
}
USBH_EpDesc_TypeDef;
#endif
/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/