84958a8fe1
The size of the event ringbuf was previously fixed to compile-time config value, but it's necessary to sometimes increase this for applications that have large characteristic buffers to read, or many events at once. With this commit the size can be set via BLE.config(rxbuf=512), for example. This also resizes the internal event data buffer which sets the maximum size of incoming data passed to the event handler.
368 lines
15 KiB
ReStructuredText
368 lines
15 KiB
ReStructuredText
:mod:`ubluetooth` --- low-level Bluetooth
|
|
=========================================
|
|
|
|
.. module:: ubluetooth
|
|
:synopsis: Low-level Bluetooth radio functionality
|
|
|
|
This module provides an interface to a Bluetooth controller on a board.
|
|
Currently this supports Bluetooth Low Energy (BLE) in Central, Peripheral,
|
|
Broadcaster, and Observer roles, and a device may operate in multiple
|
|
roles concurrently.
|
|
|
|
This API is intended to match the low-level Bluetooth protocol and provide
|
|
building-blocks for higher-level abstractions such as specific device types.
|
|
|
|
class BLE
|
|
---------
|
|
|
|
Constructor
|
|
-----------
|
|
|
|
.. class:: BLE()
|
|
|
|
Returns the singleton BLE object.
|
|
|
|
Configuration
|
|
-------------
|
|
|
|
.. method:: BLE.active([active])
|
|
|
|
Optionally changes the active state of the BLE radio, and returns the
|
|
current state.
|
|
|
|
The radio must be made active before using any other methods on this class.
|
|
|
|
.. method:: BLE.config('param')
|
|
BLE.config(param=value, ...)
|
|
|
|
Get or set configuration values of the BLE interface. To get a value the
|
|
parameter name should be quoted as a string, and just one parameter is
|
|
queried at a time. To set values use the keyword syntax, and one ore more
|
|
parameter can be set at a time.
|
|
|
|
Currently supported values are:
|
|
|
|
- ``'mac'``: Returns the device MAC address. If a device has a fixed address
|
|
(e.g. PYBD) then it will be returned. Otherwise (e.g. ESP32) a random
|
|
address will be generated when the BLE interface is made active.
|
|
|
|
- ``'rxbuf'``: Set the size in bytes of the internal buffer used to store
|
|
incoming events. This buffer is global to the entire BLE driver and so
|
|
handles incoming data for all events, including all characteristics.
|
|
Increasing this allows better handling of bursty incoming data (for
|
|
example scan results) and the ability for a central role to receive
|
|
larger characteristic values.
|
|
|
|
Event Handling
|
|
--------------
|
|
|
|
.. method:: BLE.irq(handler, trigger=0xffff)
|
|
|
|
Registers a callback for events from the BLE stack. The *handler* takes two
|
|
arguments, ``event`` (which will be one of the codes below) and ``data``
|
|
(which is an event-specific tuple of values).
|
|
|
|
The optional *trigger* parameter allows you to set a mask of events that
|
|
your program is interested in. The default is all events.
|
|
|
|
Note: the ``addr``, ``adv_data`` and ``uuid`` entries in the tuples are
|
|
references to data managed by the :mod:`ubluetooth` module (i.e. the same
|
|
instance will be re-used across multiple calls to the event handler). If
|
|
your program wants to use this data outside of the handler, then it must
|
|
copy them first, e.g. by using ``bytes(addr)`` or ``bluetooth.UUID(uuid)``.
|
|
|
|
An event handler showing all possible events::
|
|
|
|
def bt_irq(event, data):
|
|
if event == _IRQ_CENTRAL_CONNECT:
|
|
# A central has connected to this peripheral.
|
|
conn_handle, addr_type, addr = data
|
|
elif event == _IRQ_CENTRAL_DISCONNECT:
|
|
# A central has disconnected from this peripheral.
|
|
conn_handle, addr_type, addr = data
|
|
elif event == _IRQ_GATTS_WRITE:
|
|
# A central has written to this characteristic or descriptor.
|
|
conn_handle, attr_handle = data
|
|
elif event == _IRQ_GATTS_READ_REQUEST:
|
|
# A central has issued a read. Note: this is a hard IRQ.
|
|
# Return None to deny the read.
|
|
# Note: This event is not supported on ESP32.
|
|
conn_handle, attr_handle = data
|
|
elif event == _IRQ_SCAN_RESULT:
|
|
# A single scan result.
|
|
addr_type, addr, connectable, rssi, adv_data = data
|
|
elif event == _IRQ_SCAN_COMPLETE:
|
|
# Scan duration finished or manually stopped.
|
|
pass
|
|
elif event == _IRQ_PERIPHERAL_CONNECT:
|
|
# A successful gap_connect().
|
|
conn_handle, addr_type, addr = data
|
|
elif event == _IRQ_PERIPHERAL_DISCONNECT:
|
|
# Connected peripheral has disconnected.
|
|
conn_handle, addr_type, addr = data
|
|
elif event == _IRQ_GATTC_SERVICE_RESULT:
|
|
# Called for each service found by gattc_discover_services().
|
|
conn_handle, start_handle, end_handle, uuid = data
|
|
elif event == _IRQ_GATTC_CHARACTERISTIC_RESULT:
|
|
# Called for each characteristic found by gattc_discover_services().
|
|
conn_handle, def_handle, value_handle, properties, uuid = data
|
|
elif event == _IRQ_GATTC_DESCRIPTOR_RESULT:
|
|
# Called for each descriptor found by gattc_discover_descriptors().
|
|
conn_handle, dsc_handle, uuid = data
|
|
elif event == _IRQ_GATTC_READ_RESULT:
|
|
# A gattc_read() has completed.
|
|
conn_handle, value_handle, char_data = data
|
|
elif event == _IRQ_GATTC_WRITE_STATUS:
|
|
# A gattc_write() has completed.
|
|
conn_handle, value_handle, status = data
|
|
elif event == _IRQ_GATTC_NOTIFY:
|
|
# A peripheral has sent a notify request.
|
|
conn_handle, value_handle, notify_data = data
|
|
elif event == _IRQ_GATTC_INDICATE:
|
|
# A peripheral has sent an indicate request.
|
|
conn_handle, value_handle, notify_data = data
|
|
|
|
The event codes are::
|
|
|
|
from micropython import const
|
|
_IRQ_CENTRAL_CONNECT = const(1 << 0)
|
|
_IRQ_CENTRAL_DISCONNECT = const(1 << 1)
|
|
_IRQ_GATTS_WRITE = const(1 << 2)
|
|
_IRQ_GATTS_READ_REQUEST = const(1 << 3)
|
|
_IRQ_SCAN_RESULT = const(1 << 4)
|
|
_IRQ_SCAN_COMPLETE = const(1 << 5)
|
|
_IRQ_PERIPHERAL_CONNECT = const(1 << 6)
|
|
_IRQ_PERIPHERAL_DISCONNECT = const(1 << 7)
|
|
_IRQ_GATTC_SERVICE_RESULT = const(1 << 8)
|
|
_IRQ_GATTC_CHARACTERISTIC_RESULT = const(1 << 9)
|
|
_IRQ_GATTC_DESCRIPTOR_RESULT = const(1 << 10)
|
|
_IRQ_GATTC_READ_RESULT = const(1 << 11)
|
|
_IRQ_GATTC_WRITE_STATUS = const(1 << 12)
|
|
_IRQ_GATTC_NOTIFY = const(1 << 13)
|
|
_IRQ_GATTC_INDICATE = const(1 << 14)
|
|
|
|
In order to save space in the firmware, these constants are not included on the
|
|
:mod:`ubluetooth` module. Add the ones that you need from the list above to your
|
|
program.
|
|
|
|
|
|
Broadcaster Role (Advertiser)
|
|
-----------------------------
|
|
|
|
.. method:: BLE.gap_advertise(interval_us, adv_data=None, resp_data=None, connectable=True)
|
|
|
|
Starts advertising at the specified interval (in **micro**\ seconds). This
|
|
interval will be rounded down to the nearest 625us. To stop advertising, set
|
|
*interval_us* to ``None``.
|
|
|
|
*adv_data* and *resp_data* can be any type that implements the buffer
|
|
protocol (e.g. ``bytes``, ``bytearray``, ``str``). *adv_data* is included
|
|
in all broadcasts, and *resp_data* is send in reply to an active scan.
|
|
|
|
Note: if *adv_data* (or *resp_data*) is ``None``, then the data passed
|
|
to the previous call to ``gap_advertise`` will be re-used. This allows a
|
|
broadcaster to resume advertising with just ``gap_advertise(interval_us)``.
|
|
To clear the advertising payload pass an empty ``bytes``, i.e. ``b''``.
|
|
|
|
|
|
Observer Role (Scanner)
|
|
-----------------------
|
|
|
|
.. method:: BLE.gap_scan(duration_ms, [interval_us], [window_us])
|
|
|
|
Run a scan operation lasting for the specified duration (in **milli**\ seconds).
|
|
|
|
To scan indefinitely, set *duration_ms* to ``0``.
|
|
|
|
To stop scanning, set *duration_ms* to ``None``.
|
|
|
|
Use *interval_us* and *window_us* to optionally configure the duty cycle.
|
|
The scanner will run for *window_us* **micro**\ seconds every *interval_us*
|
|
**micro**\ seconds for a total of *duration_ms* **milli**\ seconds. The default
|
|
interval and window are 1.28 seconds and 11.25 milliseconds respectively
|
|
(background scanning).
|
|
|
|
For each scan result, the ``_IRQ_SCAN_RESULT`` event will be raised.
|
|
|
|
When scanning is stopped (either due to the duration finishing or when
|
|
explicitly stopped), the ``_IRQ_SCAN_COMPLETE`` event will be raised.
|
|
|
|
|
|
Peripheral Role (GATT Server)
|
|
-----------------------------
|
|
|
|
A BLE peripheral has a set of registered services. Each service may contain
|
|
characteristics, which each have a value. Characteristics can also contain
|
|
descriptors, which themselves have values.
|
|
|
|
These values are stored locally, and are accessed by their "value handle" which
|
|
is generated during service registration. They can also be read from or written
|
|
to by a remote central device. Additionally, a peripheral can "notify" a
|
|
characteristic to a connected central via a connection handle.
|
|
|
|
Characteristics and descriptors have a default maximum size of 20 bytes.
|
|
Anything written to them by a central will be truncated to this length. However,
|
|
any local write will increase the maximum size, so if you want to allow larger
|
|
writes from a central to a given characteristic, use
|
|
:meth:`gatts_write<BLE.gatts_write>` after registration. e.g.
|
|
``gatts_write(char_handle, bytes(100))``.
|
|
|
|
.. method:: BLE.gatts_register_services(services_definition)
|
|
|
|
Configures the peripheral with the specified services, replacing any
|
|
existing services.
|
|
|
|
*services_definition* is a list of **services**, where each **service** is a
|
|
two-element tuple containing a UUID and a list of **characteristics**.
|
|
|
|
Each **characteristic** is a two-or-three-element tuple containing a UUID, a
|
|
**flags** value, and optionally a list of *descriptors*.
|
|
|
|
Each **descriptor** is a two-element tuple containing a UUID and a **flags**
|
|
value.
|
|
|
|
The **flags** are a bitwise-OR combination of the
|
|
:data:`ubluetooth.FLAG_READ`, :data:`ubluetooth.FLAG_WRITE` and
|
|
:data:`ubluetooth.FLAG_NOTIFY` values defined below.
|
|
|
|
The return value is a list (one element per service) of tuples (each element
|
|
is a value handle). Characteristics and descriptor handles are flattened
|
|
into the same tuple, in the order that they are defined.
|
|
|
|
The following example registers two services (Heart Rate, and Nordic UART)::
|
|
|
|
HR_UUID = bluetooth.UUID(0x180D)
|
|
HR_CHAR = (bluetooth.UUID(0x2A37), bluetooth.FLAG_READ | bluetooth.FLAG_NOTIFY,)
|
|
HR_SERVICE = (HR_UUID, (HR_CHAR,),)
|
|
UART_UUID = bluetooth.UUID('6E400001-B5A3-F393-E0A9-E50E24DCCA9E')
|
|
UART_TX = (bluetooth.UUID('6E400003-B5A3-F393-E0A9-E50E24DCCA9E'), bluetooth.FLAG_READ | bluetooth.FLAG_NOTIFY,)
|
|
UART_RX = (bluetooth.UUID('6E400002-B5A3-F393-E0A9-E50E24DCCA9E'), bluetooth.FLAG_WRITE,)
|
|
UART_SERVICE = (UART_UUID, (UART_TX, UART_RX,),)
|
|
SERVICES = (HR_SERVICE, UART_SERVICE,)
|
|
( (hr,), (tx, rx,), ) = bt.gatts_register_services(SERVICES)
|
|
|
|
The three value handles (``hr``, ``tx``, ``rx``) can be used with
|
|
:meth:`gatts_read <BLE.gatts_read>`, :meth:`gatts_write <BLE.gatts_write>`,
|
|
and :meth:`gatts_notify <BLE.gatts_notify>`.
|
|
|
|
**Note:** Advertising must be stopped before registering services.
|
|
|
|
.. method:: BLE.gatts_read(value_handle)
|
|
|
|
Reads the local value for this handle (which has either been written by
|
|
:meth:`gatts_write <BLE.gatts_write>` or by a remote central).
|
|
|
|
.. method:: BLE.gatts_write(value_handle, data)
|
|
|
|
Writes the local value for this handle, which can be read by a central.
|
|
|
|
.. method:: BLE.gatts_notify(conn_handle, value_handle, [data])
|
|
|
|
Notifies a connected central that this value has changed and that it should
|
|
issue a read of the current value from this peripheral.
|
|
|
|
If *data* is specified, then the that value is sent to the central as part
|
|
of the notification, avoiding the need for a separate read request. Note
|
|
that this will not update the local value stored.
|
|
|
|
.. method:: BLE.gatts_set_buffer(value_handle, len, append=False)
|
|
|
|
Sets the internal buffer size for a value in bytes. This will limit the
|
|
largest possible write that can be received. The default is 20.
|
|
|
|
Setting *append* to ``True`` will make all remote writes append to, rather
|
|
than replace, the current value. At most *len* bytes can be buffered in
|
|
this way. When you use :meth:`gatts_read <BLE.gatts_read>`, the value will
|
|
be cleared after reading. This feature is useful when implementing something
|
|
like the Nordic UART Service.
|
|
|
|
|
|
Central Role (GATT Client)
|
|
--------------------------
|
|
|
|
.. method:: BLE.gap_connect(addr_type, addr, scan_duration_ms=2000)
|
|
|
|
Connect to a peripheral.
|
|
|
|
On success, the ``_IRQ_PERIPHERAL_CONNECT`` event will be raised.
|
|
|
|
.. method:: BLE.gap_disconnect(conn_handle)
|
|
|
|
Disconnect the specified connection handle.
|
|
|
|
On success, the ``_IRQ_PERIPHERAL_DISCONNECT`` event will be raised.
|
|
|
|
Returns ``False`` if the connection handle wasn't connected, and ``True``
|
|
otherwise.
|
|
|
|
.. method:: BLE.gattc_discover_services(conn_handle)
|
|
|
|
Query a connected peripheral for its services.
|
|
|
|
For each service discovered, the ``_IRQ_GATTC_SERVICE_RESULT`` event will be
|
|
raised.
|
|
|
|
.. method:: BLE.gattc_discover_characteristics(conn_handle, start_handle, end_handle)
|
|
|
|
Query a connected peripheral for characteristics in the specified range.
|
|
|
|
For each characteristic discovered, the ``_IRQ_GATTC_CHARACTERISTIC_RESULT``
|
|
event will be raised.
|
|
|
|
.. method:: BLE.gattc_discover_descriptors(conn_handle, start_handle, end_handle)
|
|
|
|
Query a connected peripheral for descriptors in the specified range.
|
|
|
|
For each descriptor discovered, the ``_IRQ_GATTC_DESCRIPTOR_RESULT`` event
|
|
will be raised.
|
|
|
|
.. method:: BLE.gattc_read(conn_handle, value_handle)
|
|
|
|
Issue a remote read to a connected peripheral for the specified
|
|
characteristic or descriptor handle.
|
|
|
|
On success, the ``_IRQ_GATTC_READ_RESULT`` event will be raised.
|
|
|
|
.. method:: BLE.gattc_write(conn_handle, value_handle, data, mode=0)
|
|
|
|
Issue a remote write to a connected peripheral for the specified
|
|
characteristic or descriptor handle.
|
|
|
|
The argument *mode* specifies the write behaviour, with the currently
|
|
supported values being:
|
|
|
|
* ``mode=0`` (default) is a write-without-response: the write will
|
|
be sent to the remote peripheral but no confirmation will be
|
|
returned, and no event will be raised.
|
|
* ``mode=1`` is a write-with-response: the remote peripheral is
|
|
requested to send a response/acknowledgement that it received the
|
|
data.
|
|
|
|
If a response is received from the remote peripheral the
|
|
``_IRQ_GATTC_WRITE_STATUS`` event will be raised.
|
|
|
|
|
|
class UUID
|
|
----------
|
|
|
|
|
|
Constructor
|
|
-----------
|
|
|
|
.. class:: UUID(value)
|
|
|
|
Creates a UUID instance with the specified **value**.
|
|
|
|
The **value** can be either:
|
|
|
|
- A 16-bit integer. e.g. ``0x2908``.
|
|
- A 128-bit UUID string. e.g. ``'6E400001-B5A3-F393-E0A9-E50E24DCCA9E'``.
|
|
|
|
|
|
Constants
|
|
---------
|
|
|
|
.. data:: ubluetooth.FLAG_READ
|
|
ubluetooth.FLAG_WRITE
|
|
ubluetooth.FLAG_NOTIFY
|