circuitpython/ports/atmel-samd/boards/pewpew10/mpconfigboard.h

51 lines
1.4 KiB
C

#define MICROPY_HW_BOARD_NAME "PewPew 10.2"
#define MICROPY_HW_MCU_NAME "samd21e18"
#define MICROPY_PORT_A (PORT_PA24 | PORT_PA25)
#define MICROPY_PORT_B (0)
#define MICROPY_PORT_C (0)
#define CIRCUITPY_INTERNAL_NVM_SIZE 256
#define BOARD_FLASH_SIZE (0x00040000 - 0x2000 - 0x010000 - CIRCUITPY_INTERNAL_NVM_SIZE)
#define IGNORE_PIN_PB00 1
#define IGNORE_PIN_PB01 1
#define IGNORE_PIN_PB02 1
#define IGNORE_PIN_PB03 1
#define IGNORE_PIN_PB04 1
#define IGNORE_PIN_PB05 1
#define IGNORE_PIN_PB06 1
#define IGNORE_PIN_PB07 1
#define IGNORE_PIN_PB08 1
#define IGNORE_PIN_PB09 1
#define IGNORE_PIN_PB10 1
#define IGNORE_PIN_PB11 1
#define IGNORE_PIN_PB12 1
#define IGNORE_PIN_PB13 1
#define IGNORE_PIN_PB14 1
#define IGNORE_PIN_PB15 1
#define IGNORE_PIN_PB16 1
#define IGNORE_PIN_PB17 1
#define IGNORE_PIN_PB22 1
#define IGNORE_PIN_PB23 1
#define IGNORE_PIN_PB30 1
#define IGNORE_PIN_PB31 1
// USB is always used internally so skip the pin objects for it.
#define IGNORE_PIN_PA24 1
#define IGNORE_PIN_PA25 1
// Default protocol pins.
#define DEFAULT_I2C_BUS_SCL (&pin_PA01)
#define DEFAULT_I2C_BUS_SDA (&pin_PA00)
#define DEFAULT_SPI_BUS_SCK (&pin_PA31)
#define DEFAULT_SPI_BUS_MOSI (&pin_PA30)
#define DEFAULT_SPI_BUS_MISO (&pin_PA04)
#define DEFAULT_UART_BUS_RX (&pin_PA01)
#define DEFAULT_UART_BUS_TX (&pin_PA00)