6ea6c7cc9e
Configuring clocks is a critical operation and is best to avoid when possible. If the clocks really need to be reset to the same values then one can pass in a slightly higher value, eg 168000001 Hz to get 168MHz.
260 lines
9.2 KiB
C
260 lines
9.2 KiB
C
/*
|
|
* This file is part of the MicroPython project, http://micropython.org/
|
|
*
|
|
* The MIT License (MIT)
|
|
*
|
|
* Copyright (c) 2013-2018 Damien P. George
|
|
*
|
|
* Permission is hereby granted, free of charge, to any person obtaining a copy
|
|
* of this software and associated documentation files (the "Software"), to deal
|
|
* in the Software without restriction, including without limitation the rights
|
|
* to use, copy, modify, merge, publish, distribute, sublicense, and/or sell
|
|
* copies of the Software, and to permit persons to whom the Software is
|
|
* furnished to do so, subject to the following conditions:
|
|
*
|
|
* The above copyright notice and this permission notice shall be included in
|
|
* all copies or substantial portions of the Software.
|
|
*
|
|
* THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
|
|
* IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
|
|
* FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE
|
|
* AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER
|
|
* LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM,
|
|
* OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN
|
|
* THE SOFTWARE.
|
|
*/
|
|
|
|
#include "py/mperrno.h"
|
|
#include "py/mphal.h"
|
|
#include "powerctrl.h"
|
|
#include "genhdr/pllfreqtable.h"
|
|
|
|
#if !defined(STM32F0)
|
|
|
|
// Assumes that PLL is used as the SYSCLK source
|
|
int powerctrl_rcc_clock_config_pll(RCC_ClkInitTypeDef *rcc_init, uint32_t sysclk_mhz, bool need_pllsai) {
|
|
uint32_t flash_latency;
|
|
|
|
#if defined(STM32F7)
|
|
|
|
if (need_pllsai) {
|
|
// Configure PLLSAI at 48MHz for those peripherals that need this freq
|
|
const uint32_t pllsain = 192;
|
|
const uint32_t pllsaip = 4;
|
|
const uint32_t pllsaiq = 2;
|
|
RCC->PLLSAICFGR = pllsaiq << RCC_PLLSAICFGR_PLLSAIQ_Pos
|
|
| (pllsaip / 2 - 1) << RCC_PLLSAICFGR_PLLSAIP_Pos
|
|
| pllsain << RCC_PLLSAICFGR_PLLSAIN_Pos;
|
|
RCC->CR |= RCC_CR_PLLSAION;
|
|
uint32_t ticks = mp_hal_ticks_ms();
|
|
while (!(RCC->CR & RCC_CR_PLLSAIRDY)) {
|
|
if (mp_hal_ticks_ms() - ticks > 200) {
|
|
return -MP_ETIMEDOUT;
|
|
}
|
|
}
|
|
RCC->DCKCFGR2 |= RCC_DCKCFGR2_CK48MSEL;
|
|
} else {
|
|
RCC->DCKCFGR2 &= ~RCC_DCKCFGR2_CK48MSEL;
|
|
}
|
|
|
|
// If possible, scale down the internal voltage regulator to save power
|
|
uint32_t volt_scale;
|
|
if (sysclk_mhz <= 151) {
|
|
volt_scale = PWR_REGULATOR_VOLTAGE_SCALE3;
|
|
} else if (sysclk_mhz <= 180) {
|
|
volt_scale = PWR_REGULATOR_VOLTAGE_SCALE2;
|
|
} else {
|
|
volt_scale = PWR_REGULATOR_VOLTAGE_SCALE1;
|
|
}
|
|
if (HAL_PWREx_ControlVoltageScaling(volt_scale) != HAL_OK) {
|
|
return -MP_EIO;
|
|
}
|
|
|
|
// These flash_latency values assume a supply voltage between 2.7V and 3.6V
|
|
if (sysclk_mhz <= 30) {
|
|
flash_latency = FLASH_LATENCY_0;
|
|
} else if (sysclk_mhz <= 60) {
|
|
flash_latency = FLASH_LATENCY_1;
|
|
} else if (sysclk_mhz <= 90) {
|
|
flash_latency = FLASH_LATENCY_2;
|
|
} else if (sysclk_mhz <= 120) {
|
|
flash_latency = FLASH_LATENCY_3;
|
|
} else if (sysclk_mhz <= 150) {
|
|
flash_latency = FLASH_LATENCY_4;
|
|
} else if (sysclk_mhz <= 180) {
|
|
flash_latency = FLASH_LATENCY_5;
|
|
} else if (sysclk_mhz <= 210) {
|
|
flash_latency = FLASH_LATENCY_6;
|
|
} else {
|
|
flash_latency = FLASH_LATENCY_7;
|
|
}
|
|
|
|
#elif defined(MICROPY_HW_FLASH_LATENCY)
|
|
flash_latency = MICROPY_HW_FLASH_LATENCY;
|
|
#else
|
|
flash_latency = FLASH_LATENCY_5;
|
|
#endif
|
|
|
|
rcc_init->SYSCLKSource = RCC_SYSCLKSOURCE_PLLCLK;
|
|
if (HAL_RCC_ClockConfig(rcc_init, flash_latency) != HAL_OK) {
|
|
return -MP_EIO;
|
|
}
|
|
|
|
return 0;
|
|
}
|
|
|
|
#endif
|
|
|
|
#if !(defined(STM32F0) || defined(STM32L4))
|
|
|
|
STATIC uint32_t calc_ahb_div(uint32_t wanted_div) {
|
|
if (wanted_div <= 1) { return RCC_SYSCLK_DIV1; }
|
|
else if (wanted_div <= 2) { return RCC_SYSCLK_DIV2; }
|
|
else if (wanted_div <= 4) { return RCC_SYSCLK_DIV4; }
|
|
else if (wanted_div <= 8) { return RCC_SYSCLK_DIV8; }
|
|
else if (wanted_div <= 16) { return RCC_SYSCLK_DIV16; }
|
|
else if (wanted_div <= 64) { return RCC_SYSCLK_DIV64; }
|
|
else if (wanted_div <= 128) { return RCC_SYSCLK_DIV128; }
|
|
else if (wanted_div <= 256) { return RCC_SYSCLK_DIV256; }
|
|
else { return RCC_SYSCLK_DIV512; }
|
|
}
|
|
|
|
STATIC uint32_t calc_apb_div(uint32_t wanted_div) {
|
|
if (wanted_div <= 1) { return RCC_HCLK_DIV1; }
|
|
else if (wanted_div <= 2) { return RCC_HCLK_DIV2; }
|
|
else if (wanted_div <= 4) { return RCC_HCLK_DIV4; }
|
|
else if (wanted_div <= 8) { return RCC_HCLK_DIV8; }
|
|
else { return RCC_SYSCLK_DIV16; }
|
|
}
|
|
|
|
int powerctrl_set_sysclk(uint32_t sysclk, uint32_t ahb, uint32_t apb1, uint32_t apb2) {
|
|
// Return straightaway if the clocks are already at the desired frequency
|
|
if (sysclk == HAL_RCC_GetSysClockFreq()
|
|
&& ahb == HAL_RCC_GetHCLKFreq()
|
|
&& apb1 == HAL_RCC_GetPCLK1Freq()
|
|
&& apb2 == HAL_RCC_GetPCLK2Freq()) {
|
|
return 0;
|
|
}
|
|
|
|
// Default PLL parameters that give 48MHz on PLL48CK
|
|
uint32_t m = HSE_VALUE / 1000000, n = 336, p = 2, q = 7;
|
|
uint32_t sysclk_source;
|
|
bool need_pllsai = false;
|
|
|
|
// Search for a valid PLL configuration that keeps USB at 48MHz
|
|
uint32_t sysclk_mhz = sysclk / 1000000;
|
|
for (const uint16_t *pll = &pll_freq_table[MP_ARRAY_SIZE(pll_freq_table) - 1]; pll >= &pll_freq_table[0]; --pll) {
|
|
uint32_t sys = *pll & 0xff;
|
|
if (sys <= sysclk_mhz) {
|
|
m = (*pll >> 10) & 0x3f;
|
|
p = ((*pll >> 7) & 0x6) + 2;
|
|
if (m == 0) {
|
|
// special entry for using HSI directly
|
|
sysclk_source = RCC_SYSCLKSOURCE_HSI;
|
|
} else if (m == 1) {
|
|
// special entry for using HSE directly
|
|
sysclk_source = RCC_SYSCLKSOURCE_HSE;
|
|
} else {
|
|
// use PLL
|
|
sysclk_source = RCC_SYSCLKSOURCE_PLLCLK;
|
|
uint32_t vco_out = sys * p;
|
|
n = vco_out * m / (HSE_VALUE / 1000000);
|
|
q = vco_out / 48;
|
|
#if defined(STM32F7)
|
|
need_pllsai = vco_out % 48 != 0;
|
|
#endif
|
|
}
|
|
goto set_clk;
|
|
}
|
|
}
|
|
return -MP_EINVAL;
|
|
|
|
set_clk:
|
|
// Let the USB CDC have a chance to process before we change the clock
|
|
mp_hal_delay_ms(5);
|
|
|
|
// Desired system clock source is in sysclk_source
|
|
RCC_ClkInitTypeDef RCC_ClkInitStruct;
|
|
RCC_ClkInitStruct.ClockType = (RCC_CLOCKTYPE_SYSCLK | RCC_CLOCKTYPE_HCLK | RCC_CLOCKTYPE_PCLK1 | RCC_CLOCKTYPE_PCLK2);
|
|
if (sysclk_source == RCC_SYSCLKSOURCE_PLLCLK) {
|
|
// Set HSE as system clock source to allow modification of the PLL configuration
|
|
// We then change to PLL after re-configuring PLL
|
|
RCC_ClkInitStruct.SYSCLKSource = RCC_SYSCLKSOURCE_HSE;
|
|
} else {
|
|
// Directly set the system clock source as desired
|
|
RCC_ClkInitStruct.SYSCLKSource = sysclk_source;
|
|
}
|
|
|
|
// Determine the bus clock dividers
|
|
// Note: AHB freq required to be >= 14.2MHz for USB operation
|
|
RCC_ClkInitStruct.AHBCLKDivider = calc_ahb_div(sysclk / ahb);
|
|
#if !defined(STM32H7)
|
|
ahb = sysclk >> AHBPrescTable[RCC_ClkInitStruct.AHBCLKDivider >> RCC_CFGR_HPRE_Pos];
|
|
#endif
|
|
RCC_ClkInitStruct.APB1CLKDivider = calc_apb_div(ahb / apb1);
|
|
RCC_ClkInitStruct.APB2CLKDivider = calc_apb_div(ahb / apb2);
|
|
|
|
#if MICROPY_HW_CLK_LAST_FREQ
|
|
// Save the bus dividers for use later
|
|
uint32_t h = RCC_ClkInitStruct.AHBCLKDivider >> 4;
|
|
uint32_t b1 = RCC_ClkInitStruct.APB1CLKDivider >> 10;
|
|
uint32_t b2 = RCC_ClkInitStruct.APB2CLKDivider >> 10;
|
|
#endif
|
|
|
|
// Configure clock
|
|
if (HAL_RCC_ClockConfig(&RCC_ClkInitStruct, FLASH_LATENCY_1) != HAL_OK) {
|
|
return -MP_EIO;
|
|
}
|
|
|
|
#if defined(STM32F7)
|
|
// Turn PLLSAI off because we are changing PLLM (which drives PLLSAI)
|
|
RCC->CR &= ~RCC_CR_PLLSAION;
|
|
#endif
|
|
|
|
// Re-configure PLL
|
|
// Even if we don't use the PLL for the system clock, we still need it for USB, RNG and SDIO
|
|
RCC_OscInitTypeDef RCC_OscInitStruct;
|
|
RCC_OscInitStruct.OscillatorType = RCC_OSCILLATORTYPE_HSE;
|
|
RCC_OscInitStruct.HSEState = MICROPY_HW_CLK_HSE_STATE;
|
|
RCC_OscInitStruct.PLL.PLLState = RCC_PLL_ON;
|
|
RCC_OscInitStruct.PLL.PLLSource = RCC_PLLSOURCE_HSE;
|
|
RCC_OscInitStruct.PLL.PLLM = m;
|
|
RCC_OscInitStruct.PLL.PLLN = n;
|
|
RCC_OscInitStruct.PLL.PLLP = p;
|
|
RCC_OscInitStruct.PLL.PLLQ = q;
|
|
if (HAL_RCC_OscConfig(&RCC_OscInitStruct) != HAL_OK) {
|
|
return -MP_EIO;
|
|
}
|
|
|
|
// Set PLL as system clock source if wanted
|
|
if (sysclk_source == RCC_SYSCLKSOURCE_PLLCLK) {
|
|
RCC_ClkInitStruct.ClockType = RCC_CLOCKTYPE_SYSCLK;
|
|
int ret = powerctrl_rcc_clock_config_pll(&RCC_ClkInitStruct, sysclk_mhz, need_pllsai);
|
|
if (ret != 0) {
|
|
return ret;
|
|
}
|
|
}
|
|
|
|
#if MICROPY_HW_CLK_LAST_FREQ
|
|
// Save settings in RTC backup register to reconfigure clocks on hard-reset
|
|
#if defined(STM32F7)
|
|
#define FREQ_BKP BKP31R
|
|
#else
|
|
#define FREQ_BKP BKP19R
|
|
#endif
|
|
// qqqqqqqq pppppppp nnnnnnnn nnmmmmmm
|
|
// qqqqQQQQ ppppppPP nNNNNNNN NNMMMMMM
|
|
// 222111HH HHQQQQPP nNNNNNNN NNMMMMMM
|
|
p = (p / 2) - 1;
|
|
RTC->FREQ_BKP = m
|
|
| (n << 6) | (p << 16) | (q << 18)
|
|
| (h << 22)
|
|
| (b1 << 26)
|
|
| (b2 << 29);
|
|
#endif
|
|
|
|
return 0;
|
|
}
|
|
|
|
#endif
|