e1df598199
These are moved: * Display -> busdisplay.BusDisplay * FourWire -> fourwire.FourWire * EPaperDisplay -> epaperdisplay.EPaperDisplay * I2CDisplay -> i2cdisplaybus.I2CDisplayBus `paralleldisplay` is now `paralleldisplaybus` (and registered as `paralleldisplay` too). Bus related helpers are split out of display_core into bus_core. It is in still displayio since it is a dependency of both busdisplay and epaperdisplay. Fixes #7667
125 lines
4.8 KiB
C
125 lines
4.8 KiB
C
/*
|
|
* This file is part of the MicroPython project, http://micropython.org/
|
|
*
|
|
* The MIT License (MIT)
|
|
*
|
|
* Copyright (c) 2019 Scott Shawcroft for Adafruit Industries
|
|
*
|
|
* Permission is hereby granted, free of charge, to any person obtaining a copy
|
|
* of this software and associated documentation files (the "Software"), to deal
|
|
* in the Software without restriction, including without limitation the rights
|
|
* to use, copy, modify, merge, publish, distribute, sublicense, and/or sell
|
|
* copies of the Software, and to permit persons to whom the Software is
|
|
* furnished to do so, subject to the following conditions:
|
|
*
|
|
* The above copyright notice and this permission notice shall be included in
|
|
* all copies or substantial portions of the Software.
|
|
*
|
|
* THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
|
|
* IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
|
|
* FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE
|
|
* AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER
|
|
* LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM,
|
|
* OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN
|
|
* THE SOFTWARE.
|
|
*/
|
|
|
|
#include "supervisor/board.h"
|
|
#include "mpconfigboard.h"
|
|
#include "hal/include/hal_gpio.h"
|
|
|
|
#include "shared-bindings/busio/SPI.h"
|
|
#include "shared-bindings/fourwire/FourWire.h"
|
|
|
|
#include "shared-module/displayio/__init__.h"
|
|
#include "shared-module/displayio/mipi_constants.h"
|
|
|
|
#define DELAY 0x80
|
|
|
|
uint8_t display_init_sequence[] = {
|
|
0x01, DELAY, 100 / 5, // Soft reset, then delay 10 ms
|
|
0xB9, 3, 0xFF, 0x83, 0x57, // Extension command set
|
|
0xFF, DELAY, 500 / 5,
|
|
0xB3, 4, 0x80, 0x00, 0x06, 0x06, // 0x80 enables SDO pin (0x00 disables)
|
|
0xB6, 2, 0x01, 0x25, // -1.52V
|
|
0xB0, 1, 0x68, // Normal mode 70Hz, Idle mode 55 Hz
|
|
0xCC, 1, 0x05,
|
|
0xB1, 6,
|
|
0x00, // Not deep standby
|
|
0x15, // BT
|
|
0x1C, // VSPR
|
|
0x1C, // VSNR
|
|
0x83, // AP
|
|
0xAA, // FS
|
|
0xC0, 6,
|
|
0x50, // OPON normal
|
|
0x50, // OPON idle
|
|
0x01, // STBA
|
|
0x3C, // STBA
|
|
0x1E, // STBA
|
|
0x08, // GEN
|
|
0xB4, 7,
|
|
0x02, // NW 0x02
|
|
0x40, // RTN
|
|
0x00, // DIV
|
|
0x2A, // DUM
|
|
0x2A, // DUM
|
|
0x0D, // GDON
|
|
0x78, // GDOFF
|
|
0xE0, 34,
|
|
0x02, 0x0A, 0x11, 0x1d, 0x23, 0x35, 0x41, 0x4b, 0x4b,
|
|
0x42, 0x3A, 0x27, 0x1B, 0x08, 0x09, 0x03, 0x02, 0x0A,
|
|
0x11, 0x1d, 0x23, 0x35, 0x41, 0x4b, 0x4b, 0x42, 0x3A,
|
|
0x27, 0x1B, 0x08, 0x09, 0x03, 0x00, 0x01,
|
|
0x3a, 1, 0x55,
|
|
0x36, 1, 0x60,
|
|
0x11, DELAY, 150 / 5, // Exit Sleep, then delay 150 ms
|
|
0x29, DELAY, 50 / 5
|
|
};
|
|
|
|
void board_init(void) {
|
|
paralleldisplaybus_parallelbus_obj_t *bus = &allocate_display_bus()->parallel_bus;
|
|
bus->base.type = ¶lleldisplaybus_parallelbus_type;
|
|
common_hal_paralleldisplaybus_parallelbus_construct(bus,
|
|
&pin_PA16, // Data0
|
|
&pin_PB05, // Command or data
|
|
&pin_PB06, // Chip select
|
|
&pin_PB09, // Write
|
|
&pin_PB04, // Read
|
|
&pin_PA00, // Reset
|
|
0); // Frequency
|
|
|
|
busdisplay_busdisplay_obj_t *display = &allocate_display()->display;
|
|
display->base.type = &busdisplay_busdisplay_type;
|
|
common_hal_busdisplay_busdisplay_construct(display,
|
|
bus,
|
|
480, // Width
|
|
320, // Height
|
|
0, // column start
|
|
0, // row start
|
|
0, // rotation
|
|
16, // Color depth
|
|
false, // grayscale
|
|
false, // pixels_in_byte_share_row (unused for depths > 8)
|
|
1, // bytes per cell. Only valid for depths < 8
|
|
false, // reverse_pixels_in_byte. Only valid for depths < 8
|
|
true, // reverse_pixels_in_word
|
|
MIPI_COMMAND_SET_COLUMN_ADDRESS, // Set column command
|
|
MIPI_COMMAND_SET_PAGE_ADDRESS, // Set row command
|
|
MIPI_COMMAND_WRITE_MEMORY_START, // Write memory command
|
|
display_init_sequence,
|
|
sizeof(display_init_sequence),
|
|
&pin_PB31, // Backlight pin
|
|
NO_BRIGHTNESS_COMMAND,
|
|
1.0f, // brightness
|
|
false, // single_byte_bounds
|
|
false, // data_as_commands
|
|
true, // auto_refresh
|
|
60, // native_frames_per_second
|
|
true, // backlight_on_high
|
|
false, // SH1107_addressing
|
|
500); // backlight_pwm_frequency
|
|
}
|
|
|
|
// Use the MP_WEAK supervisor/shared/board.c versions of routines not defined here.
|