387 lines
14 KiB
ReStructuredText
387 lines
14 KiB
ReStructuredText
:mod:`lcd160cr` --- control of LCD160CR display
|
|
===============================================
|
|
|
|
.. module:: lcd160cr
|
|
:synopsis: control of LCD160CR display
|
|
|
|
This module provides control of the MicroPython LCD160CR display.
|
|
|
|
.. image:: http://micropython.org/resources/LCD160CRv10-persp.jpg
|
|
:alt: LCD160CRv1.0 picture
|
|
:width: 640px
|
|
|
|
Further resources are available via the following links:
|
|
|
|
* `LCD160CRv1.0 reference manual <http://micropython.org/resources/LCD160CRv10-refmanual.pdf>`_ (100KiB PDF)
|
|
* `LCD160CRv1.0 schematics <http://micropython.org/resources/LCD160CRv10-schematics.pdf>`_ (1.6MiB PDF)
|
|
|
|
class LCD160CR
|
|
--------------
|
|
|
|
The LCD160CR class provides an interface to the display. Create an
|
|
instance of this class and use its methods to draw to the LCD and get
|
|
the status of the touch panel.
|
|
|
|
For example::
|
|
|
|
import lcd160cr
|
|
|
|
lcd = lcd160cr.LCD160CR('X')
|
|
lcd.set_orient(lcd160cr.PORTRAIT)
|
|
lcd.set_pos(0, 0)
|
|
lcd.set_text_color(lcd.rgb(255, 0, 0), lcd.rgb(0, 0, 0))
|
|
lcd.set_font(1)
|
|
lcd.write('Hello MicroPython!')
|
|
print('touch:', lcd.get_touch())
|
|
|
|
Constructors
|
|
------------
|
|
|
|
.. class:: LCD160CR(connect=None, \*, pwr=None, i2c=None, spi=None, i2c_addr=98)
|
|
|
|
Construct an LCD160CR object. The parameters are:
|
|
|
|
- `connect` is a string specifying the physical connection of the LCD
|
|
display to the board; valid values are "X", "Y", "XY", "YX".
|
|
Use "X" when the display is connected to a pyboard in the X-skin
|
|
position, and "Y" when connected in the Y-skin position. "XY"
|
|
and "YX" are used when the display is connected to the right or
|
|
left side of the pyboard, respectively.
|
|
- `pwr` is a Pin object connected to the LCD's power/enabled pin.
|
|
- `i2c` is an I2C object connected to the LCD's I2C interface.
|
|
- `spi` is an SPI object connected to the LCD's SPI interface.
|
|
- `i2c_addr` is the I2C address of the display.
|
|
|
|
One must specify either a valid `connect` or all of `pwr`, `i2c` and `spi`.
|
|
If a valid `connect` is given then any of `pwr`, `i2c` or `spi` which are
|
|
not passed as parameters (ie they are `None`) will be created based on the
|
|
value of `connect`. This allows to override the default interface to the
|
|
display if needed.
|
|
|
|
The default values are:
|
|
|
|
- "X" is for the X-skin and uses:
|
|
``pwr=Pin("X4")``, ``i2c=I2C("X")``, ``spi=SPI("X")``
|
|
- "Y" is for the Y-skin and uses:
|
|
``pwr=Pin("Y4")``, ``i2c=I2C("Y")``, ``spi=SPI("Y")``
|
|
- "XY" is for the right-side and uses:
|
|
``pwr=Pin("X4")``, ``i2c=I2C("Y")``, ``spi=SPI("X")``
|
|
- "YX" is for the left-side and uses:
|
|
``pwr=Pin("Y4")``, ``i2c=I2C("X")``, ``spi=SPI("Y")``
|
|
|
|
See `this image <http://micropython.org/resources/LCD160CRv10-positions.jpg>`_
|
|
for how the display can be connected to the pyboard.
|
|
|
|
Static methods
|
|
--------------
|
|
|
|
.. staticmethod:: LCD160CR.rgb(r, g, b)
|
|
|
|
Return a 16-bit integer representing the given rgb color values. The
|
|
16-bit value can be used to set the font color (see
|
|
:meth:`LCD160CR.set_text_color`) pen color (see :meth:`LCD160CR.set_pen`)
|
|
and draw individual pixels.
|
|
|
|
.. staticmethod:: LCD160CR.clip_line(data, w, h):
|
|
|
|
Clip the given line data. This is for internal use.
|
|
|
|
Instance members
|
|
----------------
|
|
|
|
The following instance members are publicly accessible.
|
|
|
|
.. data:: LCD160CR.w
|
|
.. data:: LCD160CR.h
|
|
|
|
The width and height of the display, respectively, in pixels. These
|
|
members are updated when calling :meth:`LCD160CR.set_orient` and should
|
|
be considered read-only.
|
|
|
|
Setup commands
|
|
--------------
|
|
|
|
.. method:: LCD160CR.set_power(on)
|
|
|
|
Turn the display on or off, depending on the given value of `on`: 0 or `False`
|
|
will turn the display off, and 1 or `True` will turn it on.
|
|
|
|
.. method:: LCD160CR.set_orient(orient)
|
|
|
|
Set the orientation of the display. The `orient` parameter can be one
|
|
of `PORTRAIT`, `LANDSCAPE`, `PORTRAIT_UPSIDEDOWN`, `LANDSCAPE_UPSIDEDOWN`.
|
|
|
|
.. method:: LCD160CR.set_brightness(value)
|
|
|
|
Set the brightness of the display, between 0 and 31.
|
|
|
|
.. method:: LCD160CR.set_i2c_addr(addr)
|
|
|
|
Set the I2C address of the display. The `addr` value must have the
|
|
lower 2 bits cleared.
|
|
|
|
.. method:: LCD160CR.set_uart_baudrate(baudrate)
|
|
|
|
Set the baudrate of the UART interface.
|
|
|
|
.. method:: LCD160CR.set_startup_deco(value)
|
|
|
|
Set the start-up decoration of the display. The `value` parameter can be a
|
|
logical or of `STARTUP_DECO_NONE`, `STARTUP_DECO_MLOGO`, `STARTUP_DECO_INFO`.
|
|
|
|
.. method:: LCD160CR.save_to_flash()
|
|
|
|
Save the following parameters to flash so they persist on restart and power up:
|
|
initial decoration, orientation, brightness, UART baud rate, I2C address.
|
|
|
|
Pixel access methods
|
|
--------------------
|
|
|
|
The following methods manipulate individual pixels on the display.
|
|
|
|
.. method:: LCD160CR.set_pixel(x, y, c)
|
|
|
|
Set the specified pixel to the given color. The color should be a 16-bit
|
|
integer and can be created by :meth:`LCD160CR.rgb`.
|
|
|
|
.. method:: LCD160CR.get_pixel(x, y)
|
|
|
|
Get the 16-bit value of the specified pixel.
|
|
|
|
.. method:: LCD160CR.get_line(x, y, buf)
|
|
|
|
Get a line of pixels into the given buffer.
|
|
|
|
.. method:: LCD160CR.screen_dump(buf)
|
|
|
|
Dump the entire screen to the given buffer.
|
|
|
|
.. method:: LCD160CR.screen_load(buf)
|
|
|
|
Load the entire screen from the given buffer.
|
|
|
|
Drawing text
|
|
------------
|
|
|
|
To draw text one sets the position, color and font, and then uses
|
|
`write` to draw the text.
|
|
|
|
.. method:: LCD160CR.set_pos(x, y)
|
|
|
|
Set the position for text output using :meth:`LCD160CR.write`. The position
|
|
is the upper-left corner of the text.
|
|
|
|
.. method:: LCD160CR.set_text_color(fg, bg)
|
|
|
|
Set the foreground and background color of the text.
|
|
|
|
.. method:: LCD160CR.set_font(font, scale=0, bold=0, trans=0, scroll=0)
|
|
|
|
Set the font for the text. Subsequent calls to `write` will use the newly
|
|
configured font. The parameters are:
|
|
|
|
- `font` is the font family to use, valid values are 0, 1, 2, 3.
|
|
- `scale` is a scaling value for each character pixel, where the pixels
|
|
are drawn as a square with side length equal to `scale + 1`. The value
|
|
can be between 0 and 63.
|
|
- `bold` controls the number of pixels to overdraw each character pixel,
|
|
making a bold effect. The lower 2 bits of `bold` are the number of
|
|
pixels to overdraw in the horizontal direction, and the next 2 bits are
|
|
for the vertical direction. For example, a `bold` value of 5 will
|
|
overdraw 1 pixel in both the horizontal and vertical directions.
|
|
- `trans` can be either 0 or 1 and if set to 1 the characters will be
|
|
drawn with a transparent background.
|
|
- `scroll` can be either 0 or 1 and if set to 1 the display will do a
|
|
soft scroll if the text moves to the next line.
|
|
|
|
.. method:: LCD160CR.write(s)
|
|
|
|
Write text to the display, using the current position, color and font.
|
|
As text is written the position is automatically incremented. The
|
|
display supports basic VT100 control codes such as newline and backspace.
|
|
|
|
Drawing primitive shapes
|
|
------------------------
|
|
|
|
Primitive drawing commands use a foreground and background color set by the
|
|
`set_pen` method.
|
|
|
|
.. method:: LCD160CR.set_pen(line, fill)
|
|
|
|
Set the line and fill color for primitive shapes.
|
|
|
|
.. method:: LCD160CR.erase()
|
|
|
|
Erase the entire display to the pen fill color.
|
|
|
|
.. method:: LCD160CR.dot(x, y)
|
|
|
|
Draw a single pixel at the given location using the pen line color.
|
|
|
|
.. method:: LCD160CR.rect(x, y, w, h)
|
|
.. method:: LCD160CR.rect_outline(x, y, w, h)
|
|
.. method:: LCD160CR.rect_interior(x, y, w, h)
|
|
|
|
Draw a rectangle at the given location and size using the pen line
|
|
color for the outline, and the pen fill color for the interior.
|
|
The `rect` method draws the outline and interior, while the other methods
|
|
just draw one or the other.
|
|
|
|
.. method:: LCD160CR.line(x1, y1, x2, y2)
|
|
|
|
Draw a line between the given coordinates using the pen line color.
|
|
|
|
.. method:: LCD160CR.dot_no_clip(x, y)
|
|
.. method:: LCD160CR.rect_no_clip(x, y, w, h)
|
|
.. method:: LCD160CR.rect_outline_no_clip(x, y, w, h)
|
|
.. method:: LCD160CR.rect_interior_no_clip(x, y, w, h)
|
|
.. method:: LCD160CR.line_no_clip(x1, y1, x2, y2)
|
|
|
|
These methods are as above but don't do any clipping on the input
|
|
coordinates. They are faster than the clipping versions and can be
|
|
used when you know that the coordinates are within the display.
|
|
|
|
.. method:: LCD160CR.poly_dot(data)
|
|
|
|
Draw a sequence of dots using the pen line color.
|
|
The `data` should be a buffer of bytes, with each successive pair of
|
|
bytes corresponding to coordinate pairs (x, y).
|
|
|
|
.. method:: LCD160CR.poly_line(data)
|
|
|
|
Similar to :meth:`LCD160CR.poly_dot` but draws lines between the dots.
|
|
|
|
Touch screen methods
|
|
--------------------
|
|
|
|
.. method:: LCD160CR.touch_config(calib=False, save=False, irq=None)
|
|
|
|
Configure the touch panel:
|
|
|
|
- If `calib` is `True` then the call will trigger a touch calibration of
|
|
the resistive touch sensor. This requires the user to touch various
|
|
parts of the screen.
|
|
- If `save` is `True` then the touch parameters will be saved to NVRAM
|
|
to persist across reset/power up.
|
|
- If `irq` is `True` then the display will be configured to pull the IRQ
|
|
line low when a touch force is detected. If `irq` is `False` then this
|
|
feature is disabled. If `irq` is `None` (the default value) then no
|
|
change is made to this setting.
|
|
|
|
.. method:: LCD160CR.is_touched()
|
|
|
|
Returns a boolean: `True` if there is currently a touch force on the screen,
|
|
`False` otherwise.
|
|
|
|
.. method:: LCD160CR.get_touch()
|
|
|
|
Returns a 3-tuple of: (active, x, y). If there is currently a touch force
|
|
on the screen then `active` is 1, otherwise it is 0. The `x` and `y` values
|
|
indicate the position of the current or most recent touch.
|
|
|
|
Advanced commands
|
|
-----------------
|
|
|
|
.. method:: LCD160CR.set_spi_win(x, y, w, h)
|
|
|
|
Set the window that SPI data is written to.
|
|
|
|
.. method:: LCD160CR.fast_spi(flush=True)
|
|
|
|
Ready the display to accept RGB pixel data on the SPI bus, resetting the location
|
|
of the first byte to go to the top-left corner of the window set by
|
|
:meth:`LCD160CR.set_spi_win`.
|
|
The method returns an SPI object which can be used to write the pixel data.
|
|
|
|
Pixels should be sent as 16-bit RGB values in the 5-6-5 format. The destination
|
|
counter will increase as data is sent, and data can be sent in arbitrary sized
|
|
chunks. Once the destination counter reaches the end of the window specified by
|
|
:meth:`LCD160CR.set_spi_win` it will wrap around to the top-left corner of that window.
|
|
|
|
.. method:: LCD160CR.show_framebuf(buf)
|
|
|
|
Show the given buffer on the display. `buf` should be an array of bytes containing
|
|
the 16-bit RGB values for the pixels, and they will be written to the area
|
|
specified by :meth:`LCD160CR.set_spi_win`, starting from the top-left corner.
|
|
|
|
The `framebuf <framebuf.html>`_ module can be used to construct frame buffers
|
|
and provides drawing primitives. Using a frame buffer will improve
|
|
performance of animations when compared to drawing directly to the screen.
|
|
|
|
.. method:: LCD160CR.set_scroll(on)
|
|
|
|
Turn scrolling on or off. This controls globally whether any window regions will
|
|
scroll.
|
|
|
|
.. method:: LCD160CR.set_scroll_win(win, x=-1, y=0, w=0, h=0, vec=0, pat=0, fill=0x07e0, color=0)
|
|
|
|
Configure a window region for scrolling:
|
|
|
|
- `win` is the window id to configure. There are 0..7 standard windows for
|
|
general purpose use. Window 8 is the text scroll window (the ticker).
|
|
- `x`, `y`, `w`, `h` specify the location of the window in the display.
|
|
- `vec` specifies the direction and speed of scroll: it is a 16-bit value
|
|
of the form ``0bF.ddSSSSSSSSSSSS``. `dd` is 0, 1, 2, 3 for +x, +y, -x,
|
|
-y scrolling. `F` sets the speed format, with 0 meaning that the window
|
|
is shifted `S % 256` pixel every frame, and 1 meaning that the window
|
|
is shifted 1 pixel every `S` frames.
|
|
- `pat` is a 16-bit pattern mask for the background.
|
|
- `fill` is the fill color.
|
|
- `color` is the extra color, either of the text or pattern foreground.
|
|
|
|
.. method:: LCD160CR.set_scroll_win_param(win, param, value)
|
|
|
|
Set a single parameter of a scrolling window region:
|
|
|
|
- `win` is the window id, 0..8.
|
|
- `param` is the parameter number to configure, 0..7, and corresponds
|
|
to the parameters in the `set_scroll_win` method.
|
|
- `value` is the value to set.
|
|
|
|
.. method:: LCD160CR.set_scroll_buf(s)
|
|
|
|
Set the string for scrolling in window 8. The parameter `s` must be a string
|
|
with length 32 or less.
|
|
|
|
.. method:: LCD160CR.jpeg(buf)
|
|
|
|
Display a JPEG. `buf` should contain the entire JPEG data. JPEG data should
|
|
not include EXIF information. The following encodings are supported: Baseline
|
|
DCT, Huffman coding, 8 bits per sample, 3 color components, YCbCr4:2:2.
|
|
The origin of the JPEG is set by :meth:`LCD160CR.set_pos`.
|
|
|
|
.. method:: LCD160CR.jpeg_start(total_len)
|
|
.. method:: LCD160CR.jpeg_data(buf)
|
|
|
|
Display a JPEG with the data split across multiple buffers. There must be
|
|
a single call to `jpeg_start` to begin with, specifying the total number of
|
|
bytes in the JPEG. Then this number of bytes must be transferred to the
|
|
display using one or more calls to the `jpeg_data` command.
|
|
|
|
.. method:: LCD160CR.feed_wdt()
|
|
|
|
The first call to this method will start the display's internal watchdog
|
|
timer. Subsequent calls will feed the watchdog. The timeout is roughly 30
|
|
seconds.
|
|
|
|
.. method:: LCD160CR.reset()
|
|
|
|
Reset the display.
|
|
|
|
Constants
|
|
---------
|
|
|
|
.. data:: lcd160cr.PORTRAIT
|
|
.. data:: lcd160cr.LANDSCAPE
|
|
.. data:: lcd160cr.PORTRAIT_UPSIDEDOWN
|
|
.. data:: lcd160cr.LANDSCAPE_UPSIDEDOWN
|
|
|
|
orientation of the display, used by :meth:`LCD160CR.set_orient`
|
|
|
|
.. data:: lcd160cr.STARTUP_DECO_NONE
|
|
.. data:: lcd160cr.STARTUP_DECO_MLOGO
|
|
.. data:: lcd160cr.STARTUP_DECO_INFO
|
|
|
|
type of start-up decoration, can be or'd together, used by
|
|
:meth:`LCD160CR.set_startup_deco`
|