circuitpython

boards

nrf5/boards: Updating board makefiles for s132 and s1xx target for pca10040 (nrf52832) by adding sub variant and device define to the makefiles.

2017-02-03 19:28:16 +01:00

device

nrf5/devices: Removing define which clutters ported modules from nrf.h.

2017-01-08 21:20:12 +01:00

examples

nrf5/examples: Updating ssd1306.py example with a comment describing proceedure on how to use the I2C variant of the driver.

2017-02-02 23:50:43 +01:00

freeze

nrf5: Renaming python modules folder to freeze to give the folder its right meaning. The scripts put into this folder will be frozen.

2017-02-04 23:46:29 +01:00

hal

nrf5/hal: Line wrapping params in hal_spi.c to make it easier to read.

2017-02-02 23:47:30 +01:00

modules

nrf5/drivers: Renaming folder to modules.

2017-02-04 23:51:11 +01:00

sdk

nrf5/sdk: Adding compilation config whether to include BLE NUS implementation. Config found in sdk/nrf5_sdk_conf.h. NUS enabled for s132 targets by default.

2017-02-04 16:24:50 +01:00

.gitignore

ignore default build folders

2016-11-16 23:40:38 +01:00

adc.c

nrf5/adc: Adding all 8 instances to adc python module. Valid for both nrf51 and nrf52.

2017-01-15 17:28:41 +01:00

adc.h

nrf5/adc: Adding ADC machine module base files. Implementation missing.

2017-01-11 17:16:32 +01:00

builtin_open.c

nrf5: Updating port with new content. SPI, SDcard (trough sdcard.py), Pin, and machine module. Also adding some basic modules depending on SDK and bluetooth stack from nordic semiconductor. NUS is module copied from original port by tralamazza, and new basic module for 6lowpan over BLE which can be used by modnetwork and modusocket. Basic BLE module to enable bluetooth stack and start a eddystone advertisment is kept, and still works without SDK, even if in the SDK folder (its placed there as it needs bluetooth stack from an SDK).

2016-12-13 20:27:26 +01:00

fatfs_port.c

nrf5: Updating port with new content. SPI, SDcard (trough sdcard.py), Pin, and machine module. Also adding some basic modules depending on SDK and bluetooth stack from nordic semiconductor. NUS is module copied from original port by tralamazza, and new basic module for 6lowpan over BLE which can be used by modnetwork and modusocket. Basic BLE module to enable bluetooth stack and start a eddystone advertisment is kept, and still works without SDK, even if in the SDK folder (its placed there as it needs bluetooth stack from an SDK).

2016-12-13 20:27:26 +01:00

font_petme128_8x8.h

nrf5/lcd: Changing framebuffer to use petme128 8x8 font. This is vertical font. Code modified to flip and mirror the font when rendering a character. Adding copy of the font from stmhal.

2016-12-29 15:35:24 +01:00

gccollect.c

Base support for nrf51 and nrf52 base without depending on SDK. SoftDevice usage optional.

2016-11-16 21:38:25 +01:00

gccollect.h

nrf5: Updating port with new content. SPI, SDcard (trough sdcard.py), Pin, and machine module. Also adding some basic modules depending on SDK and bluetooth stack from nordic semiconductor. NUS is module copied from original port by tralamazza, and new basic module for 6lowpan over BLE which can be used by modnetwork and modusocket. Basic BLE module to enable bluetooth stack and start a eddystone advertisment is kept, and still works without SDK, even if in the SDK folder (its placed there as it needs bluetooth stack from an SDK).

2016-12-13 20:27:26 +01:00

help.c

nrf5: Syncing code after upmerge with master.

2017-01-22 22:18:44 +01:00

i2c.c

nrf5/i2c: Making use of hal twi tx function in writeto function.

2017-01-31 22:48:07 +01:00

i2c.h

nrf5/i2c: Adding files for hardware i2c machine module and adding config param in mpconfigport to disable by default.

2017-01-11 16:49:55 +01:00

led.c

nrf5/led: Hardcoding GPIO port 0 for Led module for now.

2017-01-08 16:41:48 +01:00

led.h

nrf5: Updating port with new content. SPI, SDcard (trough sdcard.py), Pin, and machine module. Also adding some basic modules depending on SDK and bluetooth stack from nordic semiconductor. NUS is module copied from original port by tralamazza, and new basic module for 6lowpan over BLE which can be used by modnetwork and modusocket. Basic BLE module to enable bluetooth stack and start a eddystone advertisment is kept, and still works without SDK, even if in the SDK folder (its placed there as it needs bluetooth stack from an SDK).

2016-12-13 20:27:26 +01:00

main.c

nrf5: Updating main.c to use MICROPY_PY_BLE_NUS as switch for regular uart initialization or bluetooth le uart initialization.

2017-02-04 16:08:42 +01:00

Makefile

nrf5/drivers: Renaming folder to modules.

2017-02-04 23:51:11 +01:00

mkrules.mk

Base support for nrf51 and nrf52 base without depending on SDK. SoftDevice usage optional.

2016-11-16 21:38:25 +01:00

modmachine.c

nrf5/i2c: Adopting use of extmod/machine_i2c module as base for port's machine i2c module.

2017-01-30 00:31:00 +01:00

modmachine.h

nrf5: Updating port with new content. SPI, SDcard (trough sdcard.py), Pin, and machine module. Also adding some basic modules depending on SDK and bluetooth stack from nordic semiconductor. NUS is module copied from original port by tralamazza, and new basic module for 6lowpan over BLE which can be used by modnetwork and modusocket. Basic BLE module to enable bluetooth stack and start a eddystone advertisment is kept, and still works without SDK, even if in the SDK folder (its placed there as it needs bluetooth stack from an SDK).

2016-12-13 20:27:26 +01:00

modnetwork.c

nrf5: Updating port with new content. SPI, SDcard (trough sdcard.py), Pin, and machine module. Also adding some basic modules depending on SDK and bluetooth stack from nordic semiconductor. NUS is module copied from original port by tralamazza, and new basic module for 6lowpan over BLE which can be used by modnetwork and modusocket. Basic BLE module to enable bluetooth stack and start a eddystone advertisment is kept, and still works without SDK, even if in the SDK folder (its placed there as it needs bluetooth stack from an SDK).

2016-12-13 20:27:26 +01:00

modnetwork.h

nrf5: Updating port with new content. SPI, SDcard (trough sdcard.py), Pin, and machine module. Also adding some basic modules depending on SDK and bluetooth stack from nordic semiconductor. NUS is module copied from original port by tralamazza, and new basic module for 6lowpan over BLE which can be used by modnetwork and modusocket. Basic BLE module to enable bluetooth stack and start a eddystone advertisment is kept, and still works without SDK, even if in the SDK folder (its placed there as it needs bluetooth stack from an SDK).

2016-12-13 20:27:26 +01:00

modpyb.c

nrf5: Updating port with new content. SPI, SDcard (trough sdcard.py), Pin, and machine module. Also adding some basic modules depending on SDK and bluetooth stack from nordic semiconductor. NUS is module copied from original port by tralamazza, and new basic module for 6lowpan over BLE which can be used by modnetwork and modusocket. Basic BLE module to enable bluetooth stack and start a eddystone advertisment is kept, and still works without SDK, even if in the SDK folder (its placed there as it needs bluetooth stack from an SDK).

2016-12-13 20:27:26 +01:00

moduos.c

nrf5: Updating port with new content. SPI, SDcard (trough sdcard.py), Pin, and machine module. Also adding some basic modules depending on SDK and bluetooth stack from nordic semiconductor. NUS is module copied from original port by tralamazza, and new basic module for 6lowpan over BLE which can be used by modnetwork and modusocket. Basic BLE module to enable bluetooth stack and start a eddystone advertisment is kept, and still works without SDK, even if in the SDK folder (its placed there as it needs bluetooth stack from an SDK).

2016-12-13 20:27:26 +01:00

modusocket.c

nrf5: Updating port with new content. SPI, SDcard (trough sdcard.py), Pin, and machine module. Also adding some basic modules depending on SDK and bluetooth stack from nordic semiconductor. NUS is module copied from original port by tralamazza, and new basic module for 6lowpan over BLE which can be used by modnetwork and modusocket. Basic BLE module to enable bluetooth stack and start a eddystone advertisment is kept, and still works without SDK, even if in the SDK folder (its placed there as it needs bluetooth stack from an SDK).

2016-12-13 20:27:26 +01:00

modutime.c

nrf5: Adding sleep_us to modutime.c and exposing mp_hal_delay_us in hal/hal_time.h

2017-01-03 21:15:53 +01:00

mpconfigport.h

nrf5: Making i2c configurable from board configuration in case board has to sacrifice the i2c machine module.

2017-02-02 18:33:03 +01:00

mphalport.c

nrf5: Fallback to HW UART when not Bluetooth LE UART has been enabled.

2017-02-04 16:15:49 +01:00

mphalport.h

nrf5/hal: Adding new macros functions to mphalport.h which are used by extmod i2c machine module.

2017-01-30 00:32:19 +01:00

nrf51_af.csv

nrf5: Updating nrf51_af.csv to reflect pins having ADC on the chip.

2017-01-11 20:13:59 +01:00

nrf52_af.csv

nrf5/pin: Adding more pins to nrf52_af.csv file for nrf52840. Port '1' will be prefixed 'B'.

2017-01-08 16:10:47 +01:00

pin_defs_nrf5.h

nrf5/pin: Adding PORT_B to Pin port enum to reflect gpio port 1 on nrf52840.

2017-01-08 16:08:47 +01:00

pin_named_pins.c

nrf5: Updating port with new content. SPI, SDcard (trough sdcard.py), Pin, and machine module. Also adding some basic modules depending on SDK and bluetooth stack from nordic semiconductor. NUS is module copied from original port by tralamazza, and new basic module for 6lowpan over BLE which can be used by modnetwork and modusocket. Basic BLE module to enable bluetooth stack and start a eddystone advertisment is kept, and still works without SDK, even if in the SDK folder (its placed there as it needs bluetooth stack from an SDK).

2016-12-13 20:27:26 +01:00

pin.c

nrf5: Updating pin, spi and uart to use port configuration for gpio pins. Update pin generation script, macros for PIN generation. Updating macros for setting pin values adding new port parameter to select the correct GPIO peripheral port.

2017-01-08 16:40:18 +01:00

pin.h

nrf5/pin: Merging input and output pin configuration to one comon function. Adding implementation in Pin class to be able to configure mode and pull. Updating drivers which uses gpio pin configuration to use new function parameters.

2016-12-27 15:40:20 +01:00

pwm.c

nrf5/pwm: Moving out object types to header file so that it can be resused by other modules.

2017-01-06 23:40:23 +01:00

pwm.h

nrf5/pwm: Moving out object types to header file so that it can be resused by other modules.

2017-01-06 23:40:23 +01:00

qstrdefsport.h

Base support for nrf51 and nrf52 base without depending on SDK. SoftDevice usage optional.

2016-11-16 21:38:25 +01:00

rtc.c

nrf5/rtc: Correcting RTC1 base error in rtc template.

2017-01-12 08:47:16 +01:00

rtc.h

nrf5/rtc: Adding skeleton for machine rtc module for nrf51/52.

2016-12-26 16:46:23 +01:00

spi.c

nrf5/spi: Adding multiple instances of machine SPI depending on which chip is targeted (nrf51/nrf52832/nrf52540). Updating board config requirement to give variable name of const pointer to Pin instead of a Pin name. Adding support of giving keyword set mosi/miso/clk pin through constructor.

2017-01-26 21:27:59 +01:00

spi.h

nrf5/spi: Moving *_spi_obj_t out of implementation file to header. Setting hal init structure in the object structure instead of making a temp struct to configure hal. This would enable lookup of the spi settings later.

2017-01-05 19:50:20 +01:00

timer.c

nrf5/timer: Adding initializaton of id field for Timer_HandleTypeDef's. Adding simple print function. Adding make_new function. Enabling the functions in machine_timer_type.

2016-12-26 16:13:09 +01:00

timer.h

nrf5/timer: Adding skeleton for machine timer module for nrf51/52.

2016-12-26 14:03:50 +01:00

uart.c

nrf5/uart: Updating uart module to use new config hal config structure members for pins. Changing board config provided pins to use const pointers from generated pins instead of pin name.

2017-01-26 21:59:37 +01:00

uart.h

nrf5: Updating port with new content. SPI, SDcard (trough sdcard.py), Pin, and machine module. Also adding some basic modules depending on SDK and bluetooth stack from nordic semiconductor. NUS is module copied from original port by tralamazza, and new basic module for 6lowpan over BLE which can be used by modnetwork and modusocket. Basic BLE module to enable bluetooth stack and start a eddystone advertisment is kept, and still works without SDK, even if in the SDK folder (its placed there as it needs bluetooth stack from an SDK).

2016-12-13 20:27:26 +01:00