History

DavePutz c00a630f50 Update PulseOut.c reorder the tests for zero-length		2022-08-23 15:58:27 -05:00
..
bluetooth
boards	Remove support for auto-brightness	2022-08-09 22:40:21 -04:00
common-hal	Update PulseOut.c	2022-08-23 15:58:27 -05:00
device/nrf52
freeze
nrfx@3f55e49eb1
peripherals/nrf
supervisor
.gitignore
background.c
background.h
fatfs_port.c
gccollect.c
ld_defines.c
Makefile	Conditionalize LTO	2022-05-27 12:59:54 -07:00
mpconfigport.h
mpconfigport.mk	Change I2C terminology from "peripheral" to "target"	2022-08-09 13:13:19 -04:00
mphalport.h
nrfx_config.h
nrfx_glue.h
nrfx_log.h
qstrdefsport.h
README.md
sd_mutex.c
sd_mutex.h

CircuitPython Port To The Nordic Semiconductor nRF52 Series

This is a port of CircuitPython to the Nordic Semiconductor nRF52 series of chips.

Note

: There are board-specific READMEs that may be more up to date than the generic board-neutral documentation below.

Flash

Some boards have UF2 bootloaders and can simply be flashed in the normal way, by copying firmware.uf2 to the BOOT drive.

For some boards, you can use the flash target:

make BOARD=pca10056 flash

Install the necessary tools to flash and debug using Segger:

note: On Linux it might be required to link SEGGER's libjlinkarm.so inside nrfjprog's folder.

run follow command to install adafruit-nrfutil from PyPi

$ pip3 install --user adafruit-nrfutil

make flash and make sd will not work with DFU targets. Hence, dfu-gen and dfu-flash must be used instead.

dfu-gen: Generates a Firmware zip to be used by the DFU flash application.
dfu-flash: Triggers the DFU flash application to upload the firmware from the generated Firmware zip file.

When enabled you have different options to test it: