djsundog/circuitpython
1
0
Fork 0
Code Issues Pull Requests Packages Projects Releases Wiki Activity
a64f2fdca0
circuitpython/ports/stm32/uart.c
Yuuki NAGAO 141750ff79 stm32/uart: Fix UART timeout issue with low baudrate on G4 MCUs. 
With using UART FIFO, the timeout should be long enough that FIFO becomes
empty.  Since previous data transfer may be ongoing, the timeout must be
timeout_char multiplied by FIFO size + 1.

Signed-off-by: Yuuki NAGAO <wf.yn386@gmail.com>
2023-09-01 13:52:00 +10:00

1220 lines
40 KiB
C
Raw Blame History

/*
* This file is part of the MicroPython project, http://micropython.org/
*
* The MIT License (MIT)
*
* Copyright (c) 2013, 2014 Damien P. George
*
* Permission is hereby granted, free of charge, to any person obtaining a copy
* of this software and associated documentation files (the "Software"), to deal
* in the Software without restriction, including without limitation the rights
* to use, copy, modify, merge, publish, distribute, sublicense, and/or sell
* copies of the Software, and to permit persons to whom the Software is
* furnished to do so, subject to the following conditions:
*
* The above copyright notice and this permission notice shall be included in
* all copies or substantial portions of the Software.
*
* THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
* IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
* FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE
* AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER
* LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM,
* OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN
* THE SOFTWARE.
*/
#include <stdio.h>
#include <string.h>
#include <stdarg.h>
#include "py/runtime.h"
#include "py/stream.h"
#include "py/mperrno.h"
#include "py/mphal.h"
#include "shared/runtime/interrupt_char.h"
#include "shared/runtime/mpirq.h"
#include "uart.h"
#include "irq.h"
#include "pendsv.h"
#if defined(STM32F4) || defined(STM32L1)
#define UART_RXNE_IS_SET(uart) ((uart)->SR & USART_SR_RXNE)
#else
#if defined(STM32G0) || defined(STM32H7) || defined(STM32WL)
#define USART_ISR_RXNE USART_ISR_RXNE_RXFNE
#endif
#define UART_RXNE_IS_SET(uart) ((uart)->ISR & USART_ISR_RXNE)
#endif
#if defined(STM32G0) || defined(STM32WL)
#define UART_RXNE_IT_EN(uart) do { (uart)->CR1 |= USART_CR1_RXNEIE_RXFNEIE; } while (0)
#define UART_RXNE_IT_DIS(uart) do { (uart)->CR1 &= ~USART_CR1_RXNEIE_RXFNEIE; } while (0)
#else
#define UART_RXNE_IT_EN(uart) do { (uart)->CR1 |= USART_CR1_RXNEIE; } while (0)
#define UART_RXNE_IT_DIS(uart) do { (uart)->CR1 &= ~USART_CR1_RXNEIE; } while (0)
#endif
#if defined(STM32G0) || defined(STM32WL)
#define USART_CR1_IE_BASE (USART_CR1_PEIE | USART_CR1_TXEIE_TXFNFIE | USART_CR1_TCIE | USART_CR1_RXNEIE_RXFNEIE | USART_CR1_IDLEIE)
#else
#define USART_CR1_IE_BASE (USART_CR1_PEIE | USART_CR1_TXEIE | USART_CR1_TCIE | USART_CR1_RXNEIE | USART_CR1_IDLEIE)
#endif
#define USART_CR2_IE_BASE (USART_CR2_LBDIE)
#define USART_CR3_IE_BASE (USART_CR3_CTSIE | USART_CR3_EIE)
#if defined(STM32F0)
#define USART_CR1_IE_ALL (USART_CR1_IE_BASE | USART_CR1_EOBIE | USART_CR1_RTOIE | USART_CR1_CMIE)
#define USART_CR2_IE_ALL (USART_CR2_IE_BASE)
#define USART_CR3_IE_ALL (USART_CR3_IE_BASE | USART_CR3_WUFIE)
#elif defined(STM32F4)
#define USART_CR1_IE_ALL (USART_CR1_IE_BASE)
#define USART_CR2_IE_ALL (USART_CR2_IE_BASE)
#define USART_CR3_IE_ALL (USART_CR3_IE_BASE)
#elif defined(STM32F7)
#define USART_CR1_IE_ALL (USART_CR1_IE_BASE | USART_CR1_EOBIE | USART_CR1_RTOIE | USART_CR1_CMIE)
#define USART_CR2_IE_ALL (USART_CR2_IE_BASE)
#if defined(USART_CR3_TCBGTIE)
#define USART_CR3_IE_ALL (USART_CR3_IE_BASE | USART_CR3_TCBGTIE)
#else
#define USART_CR3_IE_ALL (USART_CR3_IE_BASE)
#endif
#elif defined(STM32G0) || defined(STM32G4) || defined(STM32H5)
#define USART_CR1_IE_ALL (USART_CR1_IE_BASE | USART_CR1_EOBIE | USART_CR1_RTOIE | USART_CR1_CMIE)
#define USART_CR2_IE_ALL (USART_CR2_IE_BASE)
#if defined(USART_CR3_TCBGTIE)
#define USART_CR3_IE_ALL (USART_CR3_IE_BASE | USART_CR3_TCBGTIE | USART_CR3_WUFIE)
#else
#define USART_CR3_IE_ALL (USART_CR3_IE_BASE | USART_CR3_WUFIE)
#endif
#elif defined(STM32H7)
#define USART_CR1_IE_ALL (USART_CR1_IE_BASE | USART_CR1_RXFFIE | USART_CR1_TXFEIE | USART_CR1_EOBIE | USART_CR1_RTOIE | USART_CR1_CMIE)
#define USART_CR2_IE_ALL (USART_CR2_IE_BASE)
#define USART_CR3_IE_ALL (USART_CR3_IE_BASE | USART_CR3_RXFTIE | USART_CR3_TCBGTIE | USART_CR3_TXFTIE | USART_CR3_WUFIE)
#elif defined(STM32L0)
#define USART_CR1_IE_ALL (USART_CR1_IE_BASE | USART_CR1_EOBIE | USART_CR1_RTOIE | USART_CR1_CMIE)
#define USART_CR2_IE_ALL (USART_CR2_IE_BASE)
#define USART_CR3_IE_ALL (USART_CR3_IE_BASE | USART_CR3_WUFIE)
#elif defined(STM32L1)
#define USART_CR1_IE_ALL (USART_CR1_IE_BASE)
#define USART_CR2_IE_ALL (USART_CR2_IE_BASE)
#define USART_CR3_IE_ALL (USART_CR3_IE_BASE)
#elif defined(STM32L4) || defined(STM32WB) || defined(STM32WL)
#define USART_CR1_IE_ALL (USART_CR1_IE_BASE | USART_CR1_EOBIE | USART_CR1_RTOIE | USART_CR1_CMIE)
#define USART_CR2_IE_ALL (USART_CR2_IE_BASE)
#if defined(USART_CR3_TCBGTIE)
#define USART_CR3_IE_ALL (USART_CR3_IE_BASE | USART_CR3_TCBGTIE | USART_CR3_WUFIE)
#else
#define USART_CR3_IE_ALL (USART_CR3_IE_BASE | USART_CR3_WUFIE)
#endif
#endif
typedef struct _pyb_uart_irq_map_t {
uint16_t irq_en;
uint16_t flag;
} pyb_uart_irq_map_t;
STATIC const pyb_uart_irq_map_t mp_uart_irq_map[] = {
{ USART_CR1_IDLEIE, UART_FLAG_IDLE}, // RX idle
{ USART_CR1_PEIE, UART_FLAG_PE}, // parity error
#if defined(STM32G0) || defined(STM32WL)
{ USART_CR1_TXEIE_TXFNFIE, UART_FLAG_TXE}, // TX register empty
#else
{ USART_CR1_TXEIE, UART_FLAG_TXE}, // TX register empty
#endif
{ USART_CR1_TCIE, UART_FLAG_TC}, // TX complete
#if defined(STM32G0) || defined(STM32WL)
{ USART_CR1_RXNEIE_RXFNEIE, UART_FLAG_RXNE}, // RX register not empty
#else
{ USART_CR1_RXNEIE, UART_FLAG_RXNE}, // RX register not empty
#endif
#if 0
// For now only IRQs selected by CR1 are supported
#if defined(STM32F4)
{ USART_CR2_LBDIE, UART_FLAG_LBD}, // LIN break detection
#else
{ USART_CR2_LBDIE, UART_FLAG_LBDF}, // LIN break detection
#endif
{ USART_CR3_CTSIE, UART_FLAG_CTS}, // CTS
#endif
};
void uart_init0(void) {
#if defined(STM32H7)
RCC_PeriphCLKInitTypeDef RCC_PeriphClkInit = {0};
// Configure USART1/6 and USART2/3/4/5/7/8 clock sources
RCC_PeriphClkInit.PeriphClockSelection = RCC_PERIPHCLK_USART16 | RCC_PERIPHCLK_USART234578;
RCC_PeriphClkInit.Usart16ClockSelection = RCC_USART16CLKSOURCE_D2PCLK2;
RCC_PeriphClkInit.Usart234578ClockSelection = RCC_USART234578CLKSOURCE_D2PCLK1;
if (HAL_RCCEx_PeriphCLKConfig(&RCC_PeriphClkInit) != HAL_OK) {
MICROPY_BOARD_FATAL_ERROR("HAL_RCCEx_PeriphCLKConfig");
}
#endif
}
// unregister all interrupt sources
void uart_deinit_all(void) {
for (int i = 0; i < MP_ARRAY_SIZE(MP_STATE_PORT(pyb_uart_obj_all)); i++) {
pyb_uart_obj_t *uart_obj = MP_STATE_PORT(pyb_uart_obj_all)[i];
if (uart_obj != NULL && !uart_obj->is_static) {
uart_deinit(uart_obj);
MP_STATE_PORT(pyb_uart_obj_all)[i] = NULL;
}
}
}
bool uart_exists(int uart_id) {
if (uart_id > MP_ARRAY_SIZE(MP_STATE_PORT(pyb_uart_obj_all))) {
// safeguard against pyb_uart_obj_all array being configured too small
return false;
}
switch (uart_id) {
#if defined(MICROPY_HW_UART1_TX) && defined(MICROPY_HW_UART1_RX)
case PYB_UART_1:
return true;
#endif
#if defined(MICROPY_HW_UART2_TX) && defined(MICROPY_HW_UART2_RX)
case PYB_UART_2:
return true;
#endif
#if defined(MICROPY_HW_UART3_TX) && defined(MICROPY_HW_UART3_RX)
case PYB_UART_3:
return true;
#endif
#if defined(MICROPY_HW_UART4_TX) && defined(MICROPY_HW_UART4_RX)
case PYB_UART_4:
return true;
#endif
#if defined(MICROPY_HW_UART5_TX) && defined(MICROPY_HW_UART5_RX)
case PYB_UART_5:
return true;
#endif
#if defined(MICROPY_HW_UART6_TX) && defined(MICROPY_HW_UART6_RX)
case PYB_UART_6:
return true;
#endif
#if defined(MICROPY_HW_UART7_TX) && defined(MICROPY_HW_UART7_RX)
case PYB_UART_7:
return true;
#endif
#if defined(MICROPY_HW_UART8_TX) && defined(MICROPY_HW_UART8_RX)
case PYB_UART_8:
return true;
#endif
#if defined(MICROPY_HW_UART9_TX) && defined(MICROPY_HW_UART9_RX)
case PYB_UART_9:
return true;
#endif
#if defined(MICROPY_HW_UART10_TX) && defined(MICROPY_HW_UART10_RX)
case PYB_UART_10:
return true;
#endif
#if defined(MICROPY_HW_LPUART1_TX) && defined(MICROPY_HW_LPUART1_RX)
case PYB_LPUART_1:
return true;
#endif
#if defined(MICROPY_HW_LPUART2_TX) && defined(MICROPY_HW_LPUART2_RX)
case PYB_LPUART_2:
return true;
#endif
default:
return false;
}
}
// assumes Init parameters have been set up correctly
bool uart_init(pyb_uart_obj_t *uart_obj,
uint32_t baudrate, uint32_t bits, uint32_t parity, uint32_t stop, uint32_t flow) {
USART_TypeDef *UARTx;
IRQn_Type irqn;
uint8_t uart_fn = AF_FN_UART;
int uart_unit;
const pin_obj_t *pins[4] = {0};
switch (uart_obj->uart_id) {
#if defined(MICROPY_HW_UART1_TX) && defined(MICROPY_HW_UART1_RX)
case PYB_UART_1:
uart_unit = 1;
UARTx = USART1;
irqn = USART1_IRQn;
pins[0] = MICROPY_HW_UART1_TX;
pins[1] = MICROPY_HW_UART1_RX;
#if defined(MICROPY_HW_UART1_RTS)
if (flow & UART_HWCONTROL_RTS) {
pins[2] = MICROPY_HW_UART1_RTS;
}
#endif
#if defined(MICROPY_HW_UART1_CTS)
if (flow & UART_HWCONTROL_CTS) {
pins[3] = MICROPY_HW_UART1_CTS;
}
#endif
__HAL_RCC_USART1_CLK_ENABLE();
break;
#endif
#if defined(MICROPY_HW_UART2_TX) && defined(MICROPY_HW_UART2_RX)
case PYB_UART_2:
uart_unit = 2;
UARTx = USART2;
#if defined(STM32G0)
irqn = USART2_LPUART2_IRQn;
#else
irqn = USART2_IRQn;
#endif
pins[0] = MICROPY_HW_UART2_TX;
pins[1] = MICROPY_HW_UART2_RX;
#if defined(MICROPY_HW_UART2_RTS)
if (flow & UART_HWCONTROL_RTS) {
pins[2] = MICROPY_HW_UART2_RTS;
}
#endif
#if defined(MICROPY_HW_UART2_CTS)
if (flow & UART_HWCONTROL_CTS) {
pins[3] = MICROPY_HW_UART2_CTS;
}
#endif
__HAL_RCC_USART2_CLK_ENABLE();
break;
#endif
#if defined(MICROPY_HW_UART3_TX) && defined(MICROPY_HW_UART3_RX)
case PYB_UART_3:
uart_unit = 3;
UARTx = USART3;
#if defined(STM32F0)
irqn = USART3_8_IRQn;
#elif defined(STM32G0)
irqn = USART3_4_5_6_LPUART1_IRQn;
#else
irqn = USART3_IRQn;
#endif
pins[0] = MICROPY_HW_UART3_TX;
pins[1] = MICROPY_HW_UART3_RX;
#if defined(MICROPY_HW_UART3_RTS)
if (flow & UART_HWCONTROL_RTS) {
pins[2] = MICROPY_HW_UART3_RTS;
}
#endif
#if defined(MICROPY_HW_UART3_CTS)
if (flow & UART_HWCONTROL_CTS) {
pins[3] = MICROPY_HW_UART3_CTS;
}
#endif
__HAL_RCC_USART3_CLK_ENABLE();
break;
#endif
#if defined(MICROPY_HW_UART4_TX) && defined(MICROPY_HW_UART4_RX)
case PYB_UART_4:
uart_unit = 4;
#if defined(STM32F0)
UARTx = USART4;
irqn = USART3_8_IRQn;
__HAL_RCC_USART4_CLK_ENABLE();
#elif defined(STM32L0)
UARTx = USART4;
irqn = USART4_5_IRQn;
__HAL_RCC_USART4_CLK_ENABLE();
#elif defined(STM32G0)
UARTx = USART4;
irqn = USART3_4_5_6_LPUART1_IRQn;
__HAL_RCC_USART4_CLK_ENABLE();
#else
UARTx = UART4;
irqn = UART4_IRQn;
__HAL_RCC_UART4_CLK_ENABLE();
#endif
pins[0] = MICROPY_HW_UART4_TX;
pins[1] = MICROPY_HW_UART4_RX;
#if defined(MICROPY_HW_UART4_RTS)
if (flow & UART_HWCONTROL_RTS) {
pins[2] = MICROPY_HW_UART4_RTS;
}
#endif
#if defined(MICROPY_HW_UART4_CTS)
if (flow & UART_HWCONTROL_CTS) {
pins[3] = MICROPY_HW_UART4_CTS;
}
#endif
break;
#endif
#if defined(MICROPY_HW_UART5_TX) && defined(MICROPY_HW_UART5_RX)
case PYB_UART_5:
uart_unit = 5;
#if defined(STM32F0)
UARTx = USART5;
irqn = USART3_8_IRQn;
__HAL_RCC_USART5_CLK_ENABLE();
#elif defined(STM32L0)
UARTx = USART5;
irqn = USART4_5_IRQn;
__HAL_RCC_USART5_CLK_ENABLE();
#elif defined(STM32G0)
UARTx = USART5;
irqn = USART3_4_5_6_LPUART1_IRQn;
__HAL_RCC_USART5_CLK_ENABLE();
#else
UARTx = UART5;
irqn = UART5_IRQn;
__HAL_RCC_UART5_CLK_ENABLE();
#endif
pins[0] = MICROPY_HW_UART5_TX;
pins[1] = MICROPY_HW_UART5_RX;
#if defined(MICROPY_HW_UART5_RTS)
if (flow & UART_HWCONTROL_RTS) {
pins[2] = MICROPY_HW_UART5_RTS;
}
#endif
#if defined(MICROPY_HW_UART5_CTS)
if (flow & UART_HWCONTROL_CTS) {
pins[3] = MICROPY_HW_UART5_CTS;
}
#endif
break;
#endif
#if defined(MICROPY_HW_UART6_TX) && defined(MICROPY_HW_UART6_RX)
case PYB_UART_6:
uart_unit = 6;
UARTx = USART6;
#if defined(STM32F0)
irqn = USART3_8_IRQn;
#elif defined(STM32G0)
irqn = USART3_4_5_6_LPUART1_IRQn;
#else
irqn = USART6_IRQn;
#endif
pins[0] = MICROPY_HW_UART6_TX;
pins[1] = MICROPY_HW_UART6_RX;
#if defined(MICROPY_HW_UART6_RTS)
if (flow & UART_HWCONTROL_RTS) {
pins[2] = MICROPY_HW_UART6_RTS;
}
#endif
#if defined(MICROPY_HW_UART6_CTS)
if (flow & UART_HWCONTROL_CTS) {
pins[3] = MICROPY_HW_UART6_CTS;
}
#endif
__HAL_RCC_USART6_CLK_ENABLE();
break;
#endif
#if defined(MICROPY_HW_UART7_TX) && defined(MICROPY_HW_UART7_RX)
case PYB_UART_7:
uart_unit = 7;
#if defined(STM32F0)
UARTx = USART7;
irqn = USART3_8_IRQn;
__HAL_RCC_USART7_CLK_ENABLE();
#else
UARTx = UART7;
irqn = UART7_IRQn;
__HAL_RCC_UART7_CLK_ENABLE();
#endif
pins[0] = MICROPY_HW_UART7_TX;
pins[1] = MICROPY_HW_UART7_RX;
#if defined(MICROPY_HW_UART7_RTS)
if (flow & UART_HWCONTROL_RTS) {
pins[2] = MICROPY_HW_UART7_RTS;
}
#endif
#if defined(MICROPY_HW_UART7_CTS)
if (flow & UART_HWCONTROL_CTS) {
pins[3] = MICROPY_HW_UART7_CTS;
}
#endif
break;
#endif
#if defined(MICROPY_HW_UART8_TX) && defined(MICROPY_HW_UART8_RX)
case PYB_UART_8:
uart_unit = 8;
#if defined(STM32F0)
UARTx = USART8;
irqn = USART3_8_IRQn;
__HAL_RCC_USART8_CLK_ENABLE();
#else
UARTx = UART8;
irqn = UART8_IRQn;
__HAL_RCC_UART8_CLK_ENABLE();
#endif
pins[0] = MICROPY_HW_UART8_TX;
pins[1] = MICROPY_HW_UART8_RX;
#if defined(MICROPY_HW_UART8_RTS)
if (flow & UART_HWCONTROL_RTS) {
pins[2] = MICROPY_HW_UART8_RTS;
}
#endif
#if defined(MICROPY_HW_UART8_CTS)
if (flow & UART_HWCONTROL_CTS) {
pins[3] = MICROPY_HW_UART8_CTS;
}
#endif
break;
#endif
#if defined(MICROPY_HW_UART9_TX) && defined(MICROPY_HW_UART9_RX)
case PYB_UART_9:
uart_unit = 9;
UARTx = UART9;
irqn = UART9_IRQn;
__HAL_RCC_UART9_CLK_ENABLE();
pins[0] = MICROPY_HW_UART9_TX;
pins[1] = MICROPY_HW_UART9_RX;
break;
#endif
#if defined(MICROPY_HW_UART10_TX) && defined(MICROPY_HW_UART10_RX)
case PYB_UART_10:
uart_unit = 10;
UARTx = UART10;
irqn = UART10_IRQn;
__HAL_RCC_UART10_CLK_ENABLE();
pins[0] = MICROPY_HW_UART10_TX;
pins[1] = MICROPY_HW_UART10_RX;
break;
#endif
#if defined(MICROPY_HW_LPUART1_TX) && defined(MICROPY_HW_LPUART1_RX)
case PYB_LPUART_1:
uart_fn = AF_FN_LPUART;
uart_unit = 1;
UARTx = LPUART1;
#if defined(STM32G0)
irqn = USART3_4_5_6_LPUART1_IRQn;
#else
irqn = LPUART1_IRQn;
#endif
pins[0] = MICROPY_HW_LPUART1_TX;
pins[1] = MICROPY_HW_LPUART1_RX;
#if defined(MICROPY_HW_LPUART1_RTS)
if (flow & UART_HWCONTROL_RTS) {
pins[2] = MICROPY_HW_LPUART1_RTS;
}
#endif
#if defined(MICROPY_HW_LPUART1_CTS)
if (flow & UART_HWCONTROL_CTS) {
pins[3] = MICROPY_HW_LPUART1_CTS;
}
#endif
__HAL_RCC_LPUART1_CLK_ENABLE();
break;
#endif
#if defined(MICROPY_HW_LPUART2_TX) && defined(MICROPY_HW_LPUART2_RX)
case PYB_LPUART_2:
uart_fn = AF_FN_LPUART;
uart_unit = 2;
UARTx = LPUART2;
#if defined(STM32G0)
irqn = USART2_LPUART2_IRQn;
#endif
pins[0] = MICROPY_HW_LPUART2_TX;
pins[1] = MICROPY_HW_LPUART2_RX;
#if defined(MICROPY_HW_LPUART2_RTS)
if (flow & UART_HWCONTROL_RTS) {
pins[2] = MICROPY_HW_LPUART2_RTS;
}
#endif
#if defined(MICROPY_HW_LPUART2_CTS)
if (flow & UART_HWCONTROL_CTS) {
pins[3] = MICROPY_HW_LPUART2_CTS;
}
#endif
__HAL_RCC_LPUART2_CLK_ENABLE();
break;
#endif
default:
// UART does not exist or is not configured for this board
return false;
}
uint32_t mode = MP_HAL_PIN_MODE_ALT;
for (uint i = 0; i < 4; i++) {
if (pins[i] != NULL) {
// Configure pull-up on RX and CTS (the input pins).
uint32_t pull = (i & 1) ? MP_HAL_PIN_PULL_UP : MP_HAL_PIN_PULL_NONE;
bool ret = mp_hal_pin_config_alt(pins[i], mode, pull, uart_fn, uart_unit);
if (!ret) {
return false;
}
}
}
uart_obj->uartx = UARTx;
// Set the initialisation parameters for the UART.
UART_HandleTypeDef huart;
memset(&huart, 0, sizeof(huart));
huart.Instance = UARTx;
huart.Init.BaudRate = baudrate;
huart.Init.WordLength = bits;
huart.Init.StopBits = stop;
huart.Init.Parity = parity;
huart.Init.Mode = UART_MODE_TX_RX;
huart.Init.HwFlowCtl = flow;
huart.Init.OverSampling = UART_OVERSAMPLING_16;
#if defined(STM32G4) // H7 and WB also have fifo..
huart.FifoMode = UART_FIFOMODE_ENABLE;
#endif
#if !defined(STM32F4) && !defined(STM32L1)
huart.Init.OneBitSampling = UART_ONE_BIT_SAMPLE_DISABLE;
#endif
#if defined(STM32H7) || defined(STM32WB)
// Compute the smallest prescaler that will allow the given baudrate.
uint32_t presc = UART_PRESCALER_DIV1;
if (uart_obj->uart_id == PYB_LPUART_1) {
uint32_t source_clk = uart_get_source_freq(uart_obj);
for (; presc < UART_PRESCALER_DIV256; ++presc) {
uint32_t brr = UART_DIV_LPUART(source_clk, baudrate, presc);
if (brr <= LPUART_BRR_MASK) {
break;
}
}
}
huart.Init.ClockPrescaler = presc;
#endif
// Initialise the UART hardware.
HAL_UART_Init(&huart);
// Disable all individual UART IRQs, but enable the global handler
uart_obj->uartx->CR1 &= ~USART_CR1_IE_ALL;
uart_obj->uartx->CR2 &= ~USART_CR2_IE_ALL;
uart_obj->uartx->CR3 &= ~USART_CR3_IE_ALL;
NVIC_SetPriority(IRQn_NONNEG(irqn), IRQ_PRI_UART);
HAL_NVIC_EnableIRQ(irqn);
uart_obj->is_enabled = true;
uart_obj->attached_to_repl = false;
if (bits == UART_WORDLENGTH_9B && parity == UART_PARITY_NONE) {
uart_obj->char_mask = 0x1ff;
uart_obj->char_width = CHAR_WIDTH_9BIT;
} else {
if (bits == UART_WORDLENGTH_9B || parity == UART_PARITY_NONE) {
uart_obj->char_mask = 0xff;
} else {
uart_obj->char_mask = 0x7f;
}
uart_obj->char_width = CHAR_WIDTH_8BIT;
}
uart_obj->mp_irq_trigger = 0;
uart_obj->mp_irq_obj = NULL;
return true;
}
void uart_irq_config(pyb_uart_obj_t *self, bool enable) {
if (self->mp_irq_trigger) {
for (size_t entry = 0; entry < MP_ARRAY_SIZE(mp_uart_irq_map); ++entry) {
if (mp_uart_irq_map[entry].flag & MP_UART_RESERVED_FLAGS) {
continue;
}
if (mp_uart_irq_map[entry].flag & self->mp_irq_trigger) {
if (enable) {
self->uartx->CR1 |= mp_uart_irq_map[entry].irq_en;
} else {
self->uartx->CR1 &= ~mp_uart_irq_map[entry].irq_en;
}
}
}
}
}
void uart_set_rxbuf(pyb_uart_obj_t *self, size_t len, void *buf) {
self->read_buf_head = 0;
self->read_buf_tail = 0;
self->read_buf_len = len;
self->read_buf = buf;
if (len == 0) {
UART_RXNE_IT_DIS(self->uartx);
} else {
UART_RXNE_IT_EN(self->uartx);
}
}
void uart_deinit(pyb_uart_obj_t *self) {
self->is_enabled = false;
// Disable UART
self->uartx->CR1 &= ~USART_CR1_UE;
// Reset and turn off the UART peripheral
if (self->uart_id == 1) {
HAL_NVIC_DisableIRQ(USART1_IRQn);
__HAL_RCC_USART1_FORCE_RESET();
__HAL_RCC_USART1_RELEASE_RESET();
__HAL_RCC_USART1_CLK_DISABLE();
#if defined(USART2)
} else if (self->uart_id == 2) {
#if defined(STM32G0)
HAL_NVIC_DisableIRQ(USART2_LPUART2_IRQn);
#else
HAL_NVIC_DisableIRQ(USART2_IRQn);
#endif
__HAL_RCC_USART2_FORCE_RESET();
__HAL_RCC_USART2_RELEASE_RESET();
__HAL_RCC_USART2_CLK_DISABLE();
#endif
#if defined(USART3)
} else if (self->uart_id == 3) {
#if defined(STM32G0)
HAL_NVIC_DisableIRQ(USART3_4_5_6_LPUART1_IRQn);
#elif !defined(STM32F0)
HAL_NVIC_DisableIRQ(USART3_IRQn);
#endif
__HAL_RCC_USART3_FORCE_RESET();
__HAL_RCC_USART3_RELEASE_RESET();
__HAL_RCC_USART3_CLK_DISABLE();
#endif
#if defined(UART4)
} else if (self->uart_id == 4) {
HAL_NVIC_DisableIRQ(UART4_IRQn);
__HAL_RCC_UART4_FORCE_RESET();
__HAL_RCC_UART4_RELEASE_RESET();
__HAL_RCC_UART4_CLK_DISABLE();
#endif
#if defined(USART4)
} else if (self->uart_id == 4) {
__HAL_RCC_USART4_FORCE_RESET();
__HAL_RCC_USART4_RELEASE_RESET();
__HAL_RCC_USART4_CLK_DISABLE();
#endif
#if defined(UART5)
} else if (self->uart_id == 5) {
HAL_NVIC_DisableIRQ(UART5_IRQn);
__HAL_RCC_UART5_FORCE_RESET();
__HAL_RCC_UART5_RELEASE_RESET();
__HAL_RCC_UART5_CLK_DISABLE();
#endif
#if defined(USART5)
} else if (self->uart_id == 5) {
__HAL_RCC_USART5_FORCE_RESET();
__HAL_RCC_USART5_RELEASE_RESET();
__HAL_RCC_USART5_CLK_DISABLE();
#endif
#if defined(UART6)
} else if (self->uart_id == 6) {
HAL_NVIC_DisableIRQ(USART6_IRQn);
__HAL_RCC_USART6_FORCE_RESET();
__HAL_RCC_USART6_RELEASE_RESET();
__HAL_RCC_USART6_CLK_DISABLE();
#endif
#if defined(UART7)
} else if (self->uart_id == 7) {
HAL_NVIC_DisableIRQ(UART7_IRQn);
__HAL_RCC_UART7_FORCE_RESET();
__HAL_RCC_UART7_RELEASE_RESET();
__HAL_RCC_UART7_CLK_DISABLE();
#endif
#if defined(USART7)
} else if (self->uart_id == 7) {
__HAL_RCC_USART7_FORCE_RESET();
__HAL_RCC_USART7_RELEASE_RESET();
__HAL_RCC_USART7_CLK_DISABLE();
#endif
#if defined(UART8)
} else if (self->uart_id == 8) {
HAL_NVIC_DisableIRQ(UART8_IRQn);
__HAL_RCC_UART8_FORCE_RESET();
__HAL_RCC_UART8_RELEASE_RESET();
__HAL_RCC_UART8_CLK_DISABLE();
#endif
#if defined(USART8)
} else if (self->uart_id == 8) {
__HAL_RCC_USART8_FORCE_RESET();
__HAL_RCC_USART8_RELEASE_RESET();
__HAL_RCC_USART8_CLK_DISABLE();
#endif
#if defined(UART9)
} else if (self->uart_id == 9) {
HAL_NVIC_DisableIRQ(UART9_IRQn);
__HAL_RCC_UART9_FORCE_RESET();
__HAL_RCC_UART9_RELEASE_RESET();
__HAL_RCC_UART9_CLK_DISABLE();
#endif
#if defined(UART10)
} else if (self->uart_id == 10) {
HAL_NVIC_DisableIRQ(UART10_IRQn);
__HAL_RCC_UART10_FORCE_RESET();
__HAL_RCC_UART10_RELEASE_RESET();
__HAL_RCC_UART10_CLK_DISABLE();
#endif
#if defined(LPUART1)
} else if (self->uart_id == PYB_LPUART_1) {
#if defined(STM32G0)
HAL_NVIC_DisableIRQ(USART3_4_5_6_LPUART1_IRQn);
#else
HAL_NVIC_DisableIRQ(LPUART1_IRQn);
#endif
__HAL_RCC_LPUART1_FORCE_RESET();
__HAL_RCC_LPUART1_RELEASE_RESET();
__HAL_RCC_LPUART1_CLK_DISABLE();
#endif
#if defined(LPUART2)
} else if (self->uart_id == PYB_LPUART_2) {
#if defined(STM32G0)
HAL_NVIC_DisableIRQ(USART2_LPUART2_IRQn);
#else
HAL_NVIC_DisableIRQ(LPUART2_IRQn);
#endif
__HAL_RCC_LPUART2_FORCE_RESET();
__HAL_RCC_LPUART2_RELEASE_RESET();
__HAL_RCC_LPUART2_CLK_DISABLE();
#endif
}
}
void uart_attach_to_repl(pyb_uart_obj_t *self, bool attached) {
self->attached_to_repl = attached;
}
uint32_t uart_get_source_freq(pyb_uart_obj_t *self) {
uint32_t uart_clk = 0;
#if defined(STM32F0) || defined(STM32G0)
uart_clk = HAL_RCC_GetPCLK1Freq();
#elif defined(STM32F7)
switch ((RCC->DCKCFGR2 >> ((self->uart_id - 1) * 2)) & 3) {
case 0:
if (self->uart_id == 1 || self->uart_id == 6) {
uart_clk = HAL_RCC_GetPCLK2Freq();
} else {
uart_clk = HAL_RCC_GetPCLK1Freq();
}
break;
case 1:
uart_clk = HAL_RCC_GetSysClockFreq();
break;
case 2:
uart_clk = HSI_VALUE;
break;
case 3:
uart_clk = LSE_VALUE;
break;
}
#elif defined(STM32H7A3xx) || defined(STM32H7A3xxQ) || defined(STM32H7B3xx) || defined(STM32H7B3xxQ)
uint32_t csel;
if (self->uart_id == 1 || self->uart_id == 6 || self->uart_id == 9 || self->uart_id == 10) {
csel = RCC->CDCCIP2R >> 3;
} else {
csel = RCC->CDCCIP2R;
}
switch (csel & 3) {
case 0:
if (self->uart_id == 1 || self->uart_id == 6 || self->uart_id == 9 || self->uart_id == 10) {
uart_clk = HAL_RCC_GetPCLK2Freq();
} else {
uart_clk = HAL_RCC_GetPCLK1Freq();
}
break;
case 3:
uart_clk = HSI_VALUE;
break;
case 4:
uart_clk = CSI_VALUE;
break;
case 5:
uart_clk = LSE_VALUE;
break;
default:
break;
}
#elif defined(STM32H7)
uint32_t csel;
if (self->uart_id == 1 || self->uart_id == 6) {
csel = RCC->D2CCIP2R >> 3;
} else {
csel = RCC->D2CCIP2R;
}
switch (csel & 3) {
case 0:
if (self->uart_id == 1 || self->uart_id == 6) {
uart_clk = HAL_RCC_GetPCLK2Freq();
} else {
uart_clk = HAL_RCC_GetPCLK1Freq();
}
break;
case 3:
uart_clk = HSI_VALUE;
break;
case 4:
uart_clk = CSI_VALUE;
break;
case 5:
uart_clk = LSE_VALUE;
break;
default:
break;
}
#else
if (self->uart_id == 1
#if defined(USART6)
|| self->uart_id == 6
#endif
#if defined(UART9)
|| self->uart_id == 9
#endif
#if defined(UART10)
|| self->uart_id == 10
#endif
) {
uart_clk = HAL_RCC_GetPCLK2Freq();
} else {
uart_clk = HAL_RCC_GetPCLK1Freq();
}
#endif
return uart_clk;
}
uint32_t uart_get_baudrate(pyb_uart_obj_t *self) {
#if defined(LPUART1)
if (self->uart_id == PYB_LPUART_1) {
return LL_LPUART_GetBaudRate(self->uartx, uart_get_source_freq(self)
#if defined(STM32G0) || defined(STM32G4) || defined(STM32H5) || defined(STM32H7) || defined(STM32WB) || defined(STM32WL)
, self->uartx->PRESC
#endif
);
}
#endif
return LL_USART_GetBaudRate(self->uartx, uart_get_source_freq(self),
#if defined(STM32G0) || defined(STM32G4) || defined(STM32H5) || defined(STM32H7) || defined(STM32WB) || defined(STM32WL)
self->uartx->PRESC,
#endif
LL_USART_OVERSAMPLING_16);
}
void uart_set_baudrate(pyb_uart_obj_t *self, uint32_t baudrate) {
#if defined(LPUART1)
if (self->uart_id == PYB_LPUART_1) {
LL_LPUART_SetBaudRate(self->uartx, uart_get_source_freq(self),
#if defined(STM32G0) || defined(STM32G4) || defined(STM32H5) || defined(STM32H7) || defined(STM32WB) || defined(STM32WL)
LL_LPUART_PRESCALER_DIV1,
#endif
baudrate);
return;
}
#endif
LL_USART_SetBaudRate(self->uartx, uart_get_source_freq(self),
#if defined(STM32G0) || defined(STM32G4) || defined(STM32H5) || defined(STM32H7) || defined(STM32WB) || defined(STM32WL)
LL_USART_PRESCALER_DIV1,
#endif
LL_USART_OVERSAMPLING_16, baudrate);
}
mp_uint_t uart_rx_any(pyb_uart_obj_t *self) {
int buffer_bytes = self->read_buf_head - self->read_buf_tail;
if (buffer_bytes < 0) {
return buffer_bytes + self->read_buf_len;
} else if (buffer_bytes > 0) {
return buffer_bytes;
} else {
return UART_RXNE_IS_SET(self->uartx) != 0;
}
}
// Waits at most timeout milliseconds for at least 1 char to become ready for
// reading (from buf or for direct reading).
// Returns true if something available, false if not.
bool uart_rx_wait(pyb_uart_obj_t *self, uint32_t timeout) {
uint32_t start = HAL_GetTick();
for (;;) {
if (self->read_buf_tail != self->read_buf_head || UART_RXNE_IS_SET(self->uartx)) {
return true; // have at least 1 char ready for reading
}
if (HAL_GetTick() - start >= timeout) {
return false; // timeout
}
MICROPY_EVENT_POLL_HOOK
}
}
// assumes there is a character available
int uart_rx_char(pyb_uart_obj_t *self) {
if (self->read_buf_tail != self->read_buf_head) {
// buffering via IRQ
int data;
if (self->char_width == CHAR_WIDTH_9BIT) {
data = ((uint16_t *)self->read_buf)[self->read_buf_tail];
} else {
data = self->read_buf[self->read_buf_tail];
}
self->read_buf_tail = (self->read_buf_tail + 1) % self->read_buf_len;
if (UART_RXNE_IS_SET(self->uartx)) {
// UART was stalled by flow ctrl: re-enable IRQ now we have room in buffer
UART_RXNE_IT_EN(self->uartx);
}
return data;
} else {
// no buffering
#if defined(STM32F0) || defined(STM32F7) || defined(STM32G0) || defined(STM32G4) || defined(STM32H5) || defined(STM32L0) || defined(STM32L4) || defined(STM32H7) || defined(STM32WB) || defined(STM32WL)
int data = self->uartx->RDR & self->char_mask;
self->uartx->ICR = USART_ICR_ORECF; // clear ORE if it was set
return data;
#else
int data = self->uartx->DR & self->char_mask;
// Re-enable any IRQs that were disabled in uart_irq_handler because SR couldn't
// be cleared there (clearing SR in uart_irq_handler required reading DR which
// may have lost a character).
if (self->mp_irq_trigger & UART_FLAG_RXNE) {
self->uartx->CR1 |= USART_CR1_RXNEIE;
}
if (self->mp_irq_trigger & UART_FLAG_IDLE) {
self->uartx->CR1 |= USART_CR1_IDLEIE;
}
return data;
#endif
}
}
// Waits at most timeout milliseconds for TX register to become empty.
// Returns true if can write, false if can't.
bool uart_tx_wait(pyb_uart_obj_t *self, uint32_t timeout) {
uint32_t start = HAL_GetTick();
for (;;) {
if (uart_tx_avail(self)) {
return true; // tx register is empty
}
if (HAL_GetTick() - start >= timeout) {
return false; // timeout
}
MICROPY_EVENT_POLL_HOOK
}
}
// Waits at most timeout milliseconds for UART flag to be set.
// Returns true if flag is/was set, false on timeout.
STATIC bool uart_wait_flag_set(pyb_uart_obj_t *self, uint32_t flag, uint32_t timeout) {
// Note: we don't use WFI to idle in this loop because UART tx doesn't generate
// an interrupt and the flag can be set quickly if the baudrate is large.
uint32_t start = HAL_GetTick();
for (;;) {
#if defined(STM32F4) || defined(STM32L1)
if (self->uartx->SR & flag) {
return true;
}
#else
if (self->uartx->ISR & flag) {
return true;
}
#endif
if (timeout == 0 || HAL_GetTick() - start >= timeout) {
return false; // timeout
}
}
}
// src - a pointer to the data to send (16-bit aligned for 9-bit chars)
// num_chars - number of characters to send (9-bit chars count for 2 bytes from src)
// *errcode - returns 0 for success, MP_Exxx on error
// returns the number of characters sent (valid even if there was an error)
size_t uart_tx_data(pyb_uart_obj_t *self, const void *src_in, size_t num_chars, int *errcode) {
if (num_chars == 0) {
*errcode = 0;
return 0;
}
uint32_t timeout;
if (self->uartx->CR3 & USART_CR3_CTSE) {
// CTS can hold off transmission for an arbitrarily long time. Apply
// the overall timeout rather than the character timeout.
timeout = self->timeout;
} else {
#if defined(STM32G4)
// With using UART FIFO, the timeout should be long enough that FIFO becomes empty.
// Since previous data transfer may be ongoing, the timeout must be multiplied
// timeout_char by FIFO size + 1.
// STM32G4 has 8 words FIFO.
timeout = (8 + 1) * self->timeout_char;
#else
// The timeout specified here is for waiting for the TX data register to
// become empty (ie between chars), as well as for the final char to be
// completely transferred. The default value for timeout_char is long
// enough for 1 char, but we need to double it to wait for the last char
// to be transferred to the data register, and then to be transmitted.
timeout = 2 * self->timeout_char;
#endif
}
const uint8_t *src = (const uint8_t *)src_in;
size_t num_tx = 0;
USART_TypeDef *uart = self->uartx;
while (num_tx < num_chars) {
if (!uart_wait_flag_set(self, UART_FLAG_TXE, timeout)) {
*errcode = MP_ETIMEDOUT;
return num_tx;
}
uint32_t data;
if (self->char_width == CHAR_WIDTH_9BIT) {
data = *((uint16_t *)src) & 0x1ff;
src += 2;
} else {
data = *src++;
}
#if defined(STM32F4) || defined(STM32L1)
uart->DR = data;
#else
uart->TDR = data;
#endif
++num_tx;
}
// wait for the UART frame to complete
if (!uart_wait_flag_set(self, UART_FLAG_TC, timeout)) {
*errcode = MP_ETIMEDOUT;
return num_tx;
}
*errcode = 0;
return num_tx;
}
void uart_tx_strn(pyb_uart_obj_t *uart_obj, const char *str, uint len) {
int errcode;
uart_tx_data(uart_obj, str, len, &errcode);
}
// This IRQ handler is set up to handle RXNE, IDLE and ORE interrupts only.
// Notes:
// - ORE (overrun error) is tied to the RXNE IRQ line.
// - On STM32F4 the IRQ flags are cleared by reading SR then DR.
void uart_irq_handler(mp_uint_t uart_id) {
// get the uart object
pyb_uart_obj_t *self = MP_STATE_PORT(pyb_uart_obj_all)[uart_id - 1];
if (self == NULL) {
// UART object has not been set, so we can't do anything, not
// even disable the IRQ. This should never happen.
return;
}
// Capture IRQ status flags.
#if defined(STM32F4) || defined(STM32L1)
self->mp_irq_flags = self->uartx->SR;
bool rxne_is_set = self->mp_irq_flags & USART_SR_RXNE;
bool did_clear_sr = false;
#else
self->mp_irq_flags = self->uartx->ISR;
bool rxne_is_set = self->mp_irq_flags & USART_ISR_RXNE;
#endif
// Process RXNE flag, either read the character or disable the interrupt.
if (rxne_is_set) {
if (self->read_buf_len != 0) {
uint16_t next_head = (self->read_buf_head + 1) % self->read_buf_len;
if (next_head != self->read_buf_tail) {
// only read data if room in buf
#if defined(STM32F0) || defined(STM32F7) || defined(STM32G0) || defined(STM32G4) || defined(STM32H5) || defined(STM32H7) || defined(STM32L0) || defined(STM32L4) || defined(STM32WB) || defined(STM32WL)
int data = self->uartx->RDR; // clears UART_FLAG_RXNE
#else
self->mp_irq_flags = self->uartx->SR; // resample to get any new flags since next read of DR will clear SR
int data = self->uartx->DR; // clears UART_FLAG_RXNE
did_clear_sr = true;
#endif
data &= self->char_mask;
if (self->attached_to_repl && data == mp_interrupt_char) {
// Handle interrupt coming in on a UART REPL
pendsv_kbd_intr();
} else {
if (self->char_width == CHAR_WIDTH_9BIT) {
((uint16_t *)self->read_buf)[self->read_buf_head] = data;
} else {
self->read_buf[self->read_buf_head] = data;
}
self->read_buf_head = next_head;
}
} else { // No room: leave char in buf, disable interrupt
UART_RXNE_IT_DIS(self->uartx);
}
} else {
// No buffering, disable interrupt.
UART_RXNE_IT_DIS(self->uartx);
}
}
// Clear other interrupt flags that can trigger this IRQ handler.
#if defined(STM32F4) || defined(STM32L1)
if (did_clear_sr) {
// SR was cleared above. Re-enable IDLE if it should be enabled.
if (self->mp_irq_trigger & UART_FLAG_IDLE) {
self->uartx->CR1 |= USART_CR1_IDLEIE;
}
} else {
// On STM32F4 the only way to clear flags is to read SR then DR, but that may
// lead to a loss of data in DR. So instead the IRQs are disabled.
if (self->mp_irq_flags & USART_SR_IDLE) {
self->uartx->CR1 &= ~USART_CR1_IDLEIE;
}
if (self->mp_irq_flags & USART_SR_ORE) {
// ORE is tied to RXNE so that must be disabled.
self->uartx->CR1 &= ~USART_CR1_RXNEIE;
}
}
#else
self->uartx->ICR = self->mp_irq_flags & (USART_ICR_IDLECF | USART_ICR_ORECF);
#endif
// Check the flags to see if the user handler should be called
if (self->mp_irq_trigger & self->mp_irq_flags) {
mp_irq_handler(self->mp_irq_obj);
}
}
STATIC mp_uint_t uart_irq_trigger(mp_obj_t self_in, mp_uint_t new_trigger) {
pyb_uart_obj_t *self = MP_OBJ_TO_PTR(self_in);
uart_irq_config(self, false);
self->mp_irq_trigger = new_trigger;
uart_irq_config(self, true);
return 0;
}
STATIC mp_uint_t uart_irq_info(mp_obj_t self_in, mp_uint_t info_type) {
pyb_uart_obj_t *self = MP_OBJ_TO_PTR(self_in);
if (info_type == MP_IRQ_INFO_FLAGS) {
return self->mp_irq_flags;
} else if (info_type == MP_IRQ_INFO_TRIGGERS) {
return self->mp_irq_trigger;
}
return 0;
}
const mp_irq_methods_t uart_irq_methods = {
.trigger = uart_irq_trigger,
.info = uart_irq_info,
};
MP_REGISTER_ROOT_POINTER(struct _pyb_uart_obj_t *pyb_uart_obj_all[MICROPY_HW_MAX_UART + MICROPY_HW_MAX_LPUART]);
Reference in New Issue View Git Blame Copy Permalink