circuitpython/ports/stm/supervisor/qspi_flash.c

/*
 * This file is part of the MicroPython project, http://micropython.org/
 *
 * The MIT License (MIT)
 *
 * Copyright (c) 2018 hathach for Adafruit Industries
 * Copyright (c) 2018 Scott Shawcroft for Adafruit Industries
 *
 * Permission is hereby granted, free of charge, to any person obtaining a copy
 * of this software and associated documentation files (the "Software"), to deal
 * in the Software without restriction, including without limitation the rights
 * to use, copy, modify, merge, publish, distribute, sublicense, and/or sell
 * copies of the Software, and to permit persons to whom the Software is
 * furnished to do so, subject to the following conditions:
 *
 * The above copyright notice and this permission notice shall be included in
 * all copies or substantial portions of the Software.
 *
 * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
 * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
 * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE
 * AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER
 * LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM,
 * OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN
 * THE SOFTWARE.
 */

#include "supervisor/spi_flash_api.h"

#include <stdint.h>
#include <string.h>

#include "py/mpconfig.h" // for EXTERNAL_FLASH_QSPI_DUAL
//#include "nrfx_qspi.h"

//#include "shared-bindings/microcontroller/__init__.h"

#include "supervisor/shared/external_flash/common_commands.h"
#include "supervisor/shared/external_flash/qspi_flash.h"

bool spi_flash_command(uint8_t command) {
    // nrf_qspi_cinstr_conf_t cinstr_cfg = {
    //     .opcode = command,
    //     .length = 1,
    //     .io2_level = true,
    //     .io3_level = true,
    //     .wipwait = false,
    //     .wren = false
    // };
    return false; //nrfx_qspi_cinstr_xfer(&cinstr_cfg, NULL, NULL) == NRFX_SUCCESS;
}

bool spi_flash_read_command(uint8_t command, uint8_t* response, uint32_t length) {
    // nrf_qspi_cinstr_conf_t cinstr_cfg = {
    //     .opcode = command,
    //     .length = length + 1,
    //     .io2_level = true,
    //     .io3_level = true,
    //     .wipwait = false,
    //     .wren = false
    // };
    // return nrfx_qspi_cinstr_xfer(&cinstr_cfg, NULL, response) == NRFX_SUCCESS;
    return false;

}

bool spi_flash_write_command(uint8_t command, uint8_t* data, uint32_t length) {
    // nrf_qspi_cinstr_conf_t cinstr_cfg = {
    //     .opcode = command,
    //     .length = length + 1,
    //     .io2_level = true,
    //     .io3_level = true,
    //     .wipwait = false,
    //     .wren = false // We do this manually.
    // };
    // return nrfx_qspi_cinstr_xfer(&cinstr_cfg, data, NULL) == NRFX_SUCCESS;
    return false;
}

bool spi_flash_sector_command(uint8_t command, uint32_t address) {
    // if (command != CMD_SECTOR_ERASE) {
    //     return false;
    // }
    // return nrfx_qspi_erase(NRF_QSPI_ERASE_LEN_4KB, address) == NRFX_SUCCESS;
    return false;
}

bool spi_flash_write_data(uint32_t address, uint8_t* data, uint32_t length) {
    // return nrfx_qspi_write(data, length, address) == NRFX_SUCCESS;
    return false;
}

bool spi_flash_read_data(uint32_t address, uint8_t* data, uint32_t length) {
    // return nrfx_qspi_read(data, length, address) == NRFX_SUCCESS;
    return false;
}

void spi_flash_init(void) {
    // Init QSPI flash
//     nrfx_qspi_config_t qspi_cfg = {
//         .xip_offset = 0,
//         .pins = {
//             .sck_pin = MICROPY_QSPI_SCK,
//             .csn_pin = MICROPY_QSPI_CS,
//             .io0_pin = MICROPY_QSPI_DATA0,
//             .io1_pin = NRF_QSPI_PIN_NOT_CONNECTED,
//             .io2_pin = NRF_QSPI_PIN_NOT_CONNECTED,
//             .io3_pin = NRF_QSPI_PIN_NOT_CONNECTED,

//         },
//         .prot_if = {
//             .readoc = NRF_QSPI_READOC_FASTREAD,
//             .writeoc = NRF_QSPI_WRITEOC_PP,
//             .addrmode = NRF_QSPI_ADDRMODE_24BIT,
//             .dpmconfig = false
//         },
//         .phy_if = {
//             .sck_freq = NRF_QSPI_FREQ_32MDIV16, // Start at a slow 2MHz and speed up once we know what we're talking to.
//             .sck_delay = 10,    // min time CS must stay high before going low again. in unit of 62.5 ns
//             .spi_mode = NRF_QSPI_MODE_0,
//             .dpmen = false
//         },
//         .irq_priority = 7,
//     };

// #if EXTERNAL_FLASH_QSPI_DUAL
//     qspi_cfg.pins.io1_pin = MICROPY_QSPI_DATA1;
//     qspi_cfg.prot_if.readoc = NRF_QSPI_READOC_READ2O;
//     qspi_cfg.prot_if.writeoc = NRF_QSPI_WRITEOC_PP2O;
// #else
//     qspi_cfg.pins.io1_pin = MICROPY_QSPI_DATA1;
//     qspi_cfg.pins.io2_pin = MICROPY_QSPI_DATA2;
//     qspi_cfg.pins.io3_pin = MICROPY_QSPI_DATA3;
//     qspi_cfg.prot_if.readoc = NRF_QSPI_READOC_READ4IO;
//     qspi_cfg.prot_if.writeoc = NRF_QSPI_WRITEOC_PP4O;
// #endif

//     // No callback for blocking API
//     nrfx_qspi_init(&qspi_cfg, NULL, NULL);
}

void spi_flash_init_device(const external_flash_device* device) {
    // check_quad_enable(device);

    // // Switch to single output line if the device doesn't support quad programs.
    // if (!device->supports_qspi_writes) {
    //     NRF_QSPI->IFCONFIG0 &= ~QSPI_IFCONFIG0_WRITEOC_Msk;
    //     NRF_QSPI->IFCONFIG0 |= QSPI_IFCONFIG0_WRITEOC_PP << QSPI_IFCONFIG0_WRITEOC_Pos;
    // }

    // // Speed up as much as we can.
    // // Start at 16 MHz and go down.
    // // At 32 MHz GD25Q16C doesn't work reliably on Feather 52840, even though it should work up to 104 MHz.
    // // sckfreq = 0 is 32 Mhz
    // // sckfreq = 1 is 16 MHz, etc.
    // uint8_t sckfreq = 1;
    // while (32000000 / (sckfreq + 1) > device->max_clock_speed_mhz * 1000000 && sckfreq < 16) {
    //     sckfreq += 1;
    // }
    // NRF_QSPI->IFCONFIG1 &= ~QSPI_IFCONFIG1_SCKFREQ_Msk;
    // NRF_QSPI->IFCONFIG1 |=  sckfreq << QSPI_IFCONFIG1_SCKFREQ_Pos;
}