124 lines
4.6 KiB
ReStructuredText
124 lines
4.6 KiB
ReStructuredText
.. currentmodule:: machine
|
|
.. _machine.Signal:
|
|
|
|
class Signal -- control and sense external I/O devices
|
|
======================================================
|
|
|
|
The Signal class is a simple extension of the `Pin` class. Unlike Pin, which
|
|
can be only in "absolute" 0 and 1 states, a Signal can be in "asserted"
|
|
(on) or "deasserted" (off) states, while being inverted (active-low) or
|
|
not. In other words, it adds logical inversion support to Pin functionality.
|
|
While this may seem a simple addition, it is exactly what is needed to
|
|
support wide array of simple digital devices in a way portable across
|
|
different boards, which is one of the major MicroPython goals. Regardless
|
|
of whether different users have an active-high or active-low LED, a normally
|
|
open or normally closed relay - you can develop a single, nicely looking
|
|
application which works with each of them, and capture hardware
|
|
configuration differences in few lines in the config file of your app.
|
|
|
|
Example::
|
|
|
|
from machine import Pin, Signal
|
|
|
|
# Suppose you have an active-high LED on pin 0
|
|
led1_pin = Pin(0, Pin.OUT)
|
|
# ... and active-low LED on pin 1
|
|
led2_pin = Pin(1, Pin.OUT)
|
|
|
|
# Now to light up both of them using Pin class, you'll need to set
|
|
# them to different values
|
|
led1_pin.value(1)
|
|
led2_pin.value(0)
|
|
|
|
# Signal class allows to abstract away active-high/active-low
|
|
# difference
|
|
led1 = Signal(led1_pin, invert=False)
|
|
led2 = Signal(led2_pin, invert=True)
|
|
|
|
# Now lighting up them looks the same
|
|
led1.value(1)
|
|
led2.value(1)
|
|
|
|
# Even better:
|
|
led1.on()
|
|
led2.on()
|
|
|
|
Following is the guide when Signal vs Pin should be used:
|
|
|
|
* Use Signal: If you want to control a simple on/off (including software
|
|
PWM!) devices like LEDs, multi-segment indicators, relays, buzzers, or
|
|
read simple binary sensors, like normally open or normally closed buttons,
|
|
pulled high or low, Reed switches, moisture/flame detectors, etc. etc.
|
|
Summing up, if you have a real physical device/sensor requiring GPIO
|
|
access, you likely should use a Signal.
|
|
|
|
* Use Pin: If you implement a higher-level protocol or bus to communicate
|
|
with more complex devices.
|
|
|
|
The split between Pin and Signal come from the use cases above and the
|
|
architecture of MicroPython: Pin offers the lowest overhead, which may
|
|
be important when bit-banging protocols. But Signal adds additional
|
|
flexibility on top of Pin, at the cost of minor overhead (much smaller
|
|
than if you implemented active-high vs active-low device differences in
|
|
Python manually!). Also, Pin is a low-level object which needs to be
|
|
implemented for each support board, while Signal is a high-level object
|
|
which comes for free once Pin is implemented.
|
|
|
|
If in doubt, give the Signal a try! Once again, it is offered to save
|
|
developers from the need to handle unexciting differences like active-low
|
|
vs active-high signals, and allow other users to share and enjoy your
|
|
application, instead of being frustrated by the fact that it doesn't
|
|
work for them simply because their LEDs or relays are wired in a slightly
|
|
different way.
|
|
|
|
Constructors
|
|
------------
|
|
|
|
.. class:: Signal(pin_obj, invert=False)
|
|
Signal(pin_arguments..., *, invert=False)
|
|
|
|
Create a Signal object. There're two ways to create it:
|
|
|
|
* By wrapping existing Pin object - universal method which works for
|
|
any board.
|
|
* By passing required Pin parameters directly to Signal constructor,
|
|
skipping the need to create intermediate Pin object. Available on
|
|
many, but not all boards.
|
|
|
|
The arguments are:
|
|
|
|
- ``pin_obj`` is existing Pin object.
|
|
|
|
- ``pin_arguments`` are the same arguments as can be passed to Pin constructor.
|
|
|
|
- ``invert`` - if True, the signal will be inverted (active low).
|
|
|
|
Methods
|
|
-------
|
|
|
|
.. method:: Signal.value([x])
|
|
|
|
This method allows to set and get the value of the signal, depending on whether
|
|
the argument ``x`` is supplied or not.
|
|
|
|
If the argument is omitted then this method gets the signal level, 1 meaning
|
|
signal is asserted (active) and 0 - signal inactive.
|
|
|
|
If the argument is supplied then this method sets the signal level. The
|
|
argument ``x`` can be anything that converts to a boolean. If it converts
|
|
to ``True``, the signal is active, otherwise it is inactive.
|
|
|
|
Correspondence between signal being active and actual logic level on the
|
|
underlying pin depends on whether signal is inverted (active-low) or not.
|
|
For non-inverted signal, active status corresponds to logical 1, inactive -
|
|
to logical 0. For inverted/active-low signal, active status corresponds
|
|
to logical 0, while inactive - to logical 1.
|
|
|
|
.. method:: Signal.on()
|
|
|
|
Activate signal.
|
|
|
|
.. method:: Signal.off()
|
|
|
|
Deactivate signal.
|