a377302623
This provides a standard interface to setting the global networking config for all interfaces and interface types. For ports that already use either a static hostname (mimxrt, rp2) they will now use the configured value. The default is configured by the port (or optionally the board). For interfaces that previously supported .config(hostname), this is still supported but now implemented using the global network.hostname. Similarly, pyb.country and rp2.country are now deprecated, but the methods still exist (and forward to network.hostname). Because ESP32/ESP8266 do not use extmod/modnetwork.c they are not affected by this commit. Signed-off-by: Jim Mussared <jim.mussared@gmail.com>
228 lines
9.5 KiB
C
228 lines
9.5 KiB
C
/*
|
|
* This file is part of the MicroPython project, http://micropython.org/
|
|
*
|
|
* The MIT License (MIT)
|
|
*
|
|
* Copyright (c) 2018-2019 Damien P. George
|
|
*
|
|
* Permission is hereby granted, free of charge, to any person obtaining a copy
|
|
* of this software and associated documentation files (the "Software"), to deal
|
|
* in the Software without restriction, including without limitation the rights
|
|
* to use, copy, modify, merge, publish, distribute, sublicense, and/or sell
|
|
* copies of the Software, and to permit persons to whom the Software is
|
|
* furnished to do so, subject to the following conditions:
|
|
*
|
|
* The above copyright notice and this permission notice shall be included in
|
|
* all copies or substantial portions of the Software.
|
|
*
|
|
* THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
|
|
* IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
|
|
* FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE
|
|
* AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER
|
|
* LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM,
|
|
* OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN
|
|
* THE SOFTWARE.
|
|
*/
|
|
|
|
#define MICROPY_HW_BOARD_NAME "PYBD-SF2W"
|
|
#define MICROPY_HW_MCU_NAME "STM32F722IEK"
|
|
|
|
#define MICROPY_PY_NETWORK_HOSTNAME_DEFAULT "PYBD"
|
|
|
|
#define MICROPY_PY_PYB_LEGACY (1)
|
|
#define MICROPY_HW_ENABLE_INTERNAL_FLASH_STORAGE (0)
|
|
#define MICROPY_HW_HAS_SWITCH (1)
|
|
#define MICROPY_HW_HAS_FLASH (1)
|
|
#define MICROPY_HW_ENABLE_RNG (1)
|
|
#define MICROPY_HW_ENABLE_RTC (1)
|
|
#define MICROPY_HW_ENABLE_SERVO (1)
|
|
#define MICROPY_HW_ENABLE_DAC (1)
|
|
#define MICROPY_HW_ENABLE_USB (1)
|
|
#define MICROPY_HW_ENABLE_SDCARD (1)
|
|
#define MICROPY_HW_ENABLE_MMCARD (1)
|
|
#define MICROPY_HW_ENABLE_RF_SWITCH (1)
|
|
|
|
#define MICROPY_BOARD_EARLY_INIT board_early_init
|
|
#define MICROPY_BOARD_ENTER_STOP board_sleep(1);
|
|
#define MICROPY_BOARD_LEAVE_STOP board_sleep(0);
|
|
#define MICROPY_BOARD_ENTER_STANDBY board_sleep(1);
|
|
#define MICROPY_BOARD_SDCARD_POWER mp_hal_pin_high(pyb_pin_EN_3V3);
|
|
void board_early_init(void);
|
|
void board_sleep(int value);
|
|
|
|
// HSE is 25MHz, run SYS at 120MHz
|
|
#define MICROPY_HW_CLK_PLLM (20)
|
|
#define MICROPY_HW_CLK_PLLN (192)
|
|
#define MICROPY_HW_CLK_PLLP (RCC_PLLP_DIV2)
|
|
#define MICROPY_HW_CLK_PLLQ (5)
|
|
#define MICROPY_HW_FLASH_LATENCY (FLASH_LATENCY_3)
|
|
|
|
// There is an external 32kHz oscillator
|
|
#define RTC_ASYNCH_PREDIV (3)
|
|
#define RTC_SYNCH_PREDIV (0x1fff)
|
|
#define MICROPY_HW_RTC_USE_BYPASS (1)
|
|
#define MICROPY_HW_RTC_USE_US (1)
|
|
#define MICROPY_HW_RTC_USE_CALOUT (1)
|
|
|
|
// SPI flash #1, for R/W storage
|
|
#define MICROPY_HW_SOFTQSPI_SCK_LOW(self) (GPIOE->BSRR = (0x10000 << 11))
|
|
#define MICROPY_HW_SOFTQSPI_SCK_HIGH(self) (GPIOE->BSRR = (1 << 11))
|
|
#define MICROPY_HW_SOFTQSPI_NIBBLE_READ(self) ((GPIOE->IDR >> 7) & 0xf)
|
|
#define MICROPY_HW_SPIFLASH_SIZE_BITS (16 * 1024 * 1024)
|
|
#define MICROPY_HW_SPIFLASH_CS (pyb_pin_QSPI1_CS)
|
|
#define MICROPY_HW_SPIFLASH_SCK (pyb_pin_QSPI1_CLK)
|
|
#define MICROPY_HW_SPIFLASH_IO0 (pyb_pin_QSPI1_D0)
|
|
#define MICROPY_HW_SPIFLASH_IO1 (pyb_pin_QSPI1_D1)
|
|
#define MICROPY_HW_SPIFLASH_IO2 (pyb_pin_QSPI1_D2)
|
|
#define MICROPY_HW_SPIFLASH_IO3 (pyb_pin_QSPI1_D3)
|
|
|
|
// SPI flash #1, block device config
|
|
extern const struct _mp_spiflash_config_t spiflash_config;
|
|
extern struct _spi_bdev_t spi_bdev;
|
|
#if !BUILDING_MBOOT
|
|
#define MICROPY_HW_SPIFLASH_ENABLE_CACHE (1)
|
|
#endif
|
|
#define MICROPY_HW_BDEV_IOCTL(op, arg) ( \
|
|
(op) == BDEV_IOCTL_NUM_BLOCKS ? (MICROPY_HW_SPIFLASH_SIZE_BITS / 8 / FLASH_BLOCK_SIZE) : \
|
|
(op) == BDEV_IOCTL_INIT ? spi_bdev_ioctl(&spi_bdev, (op), (uint32_t)&spiflash_config) : \
|
|
spi_bdev_ioctl(&spi_bdev, (op), (arg)) \
|
|
)
|
|
#define MICROPY_HW_BDEV_READBLOCKS(dest, bl, n) spi_bdev_readblocks(&spi_bdev, (dest), (bl), (n))
|
|
#define MICROPY_HW_BDEV_WRITEBLOCKS(src, bl, n) spi_bdev_writeblocks(&spi_bdev, (src), (bl), (n))
|
|
#define MICROPY_HW_BDEV_SPIFLASH_EXTENDED (&spi_bdev) // for extended block protocol
|
|
|
|
// SPI flash #2, to be memory mapped
|
|
#define MICROPY_HW_QSPIFLASH_SIZE_BITS_LOG2 (24)
|
|
#define MICROPY_HW_QSPIFLASH_CS (pyb_pin_QSPI2_CS)
|
|
#define MICROPY_HW_QSPIFLASH_SCK (pyb_pin_QSPI2_CLK)
|
|
#define MICROPY_HW_QSPIFLASH_IO0 (pyb_pin_QSPI2_D0)
|
|
#define MICROPY_HW_QSPIFLASH_IO1 (pyb_pin_QSPI2_D1)
|
|
#define MICROPY_HW_QSPIFLASH_IO2 (pyb_pin_QSPI2_D2)
|
|
#define MICROPY_HW_QSPIFLASH_IO3 (pyb_pin_QSPI2_D3)
|
|
|
|
// SPI flash #2, block device config
|
|
extern const struct _mp_spiflash_config_t spiflash2_config;
|
|
extern struct _spi_bdev_t spi_bdev2;
|
|
|
|
// UART config
|
|
#define MICROPY_HW_UART1_NAME "YA"
|
|
#define MICROPY_HW_UART1_TX (pyb_pin_Y1)
|
|
#define MICROPY_HW_UART1_RX (pyb_pin_Y2)
|
|
#define MICROPY_HW_UART2_TX (pyb_pin_X3)
|
|
#define MICROPY_HW_UART2_RX (pyb_pin_X4)
|
|
#define MICROPY_HW_UART2_RTS (pyb_pin_X2)
|
|
#define MICROPY_HW_UART2_CTS (pyb_pin_X1)
|
|
#define MICROPY_HW_UART3_NAME "YB"
|
|
#define MICROPY_HW_UART3_TX (pyb_pin_Y9)
|
|
#define MICROPY_HW_UART3_RX (pyb_pin_Y10)
|
|
#define MICROPY_HW_UART4_NAME "XA"
|
|
#define MICROPY_HW_UART4_TX (pyb_pin_X1)
|
|
#define MICROPY_HW_UART4_RX (pyb_pin_X2)
|
|
#define MICROPY_HW_UART6_TX (pyb_pin_BT_TXD)
|
|
#define MICROPY_HW_UART6_RX (pyb_pin_BT_RXD)
|
|
#define MICROPY_HW_UART6_RTS (pyb_pin_BT_RTS)
|
|
#define MICROPY_HW_UART6_CTS (pyb_pin_BT_CTS)
|
|
|
|
// I2C buses
|
|
#define MICROPY_HW_I2C1_NAME "X"
|
|
#define MICROPY_HW_I2C1_SCL (pyb_pin_X9)
|
|
#define MICROPY_HW_I2C1_SDA (pyb_pin_X10)
|
|
#define MICROPY_HW_I2C2_NAME "Y"
|
|
#define MICROPY_HW_I2C2_SCL (pyb_pin_Y9)
|
|
#define MICROPY_HW_I2C2_SDA (pyb_pin_Y10)
|
|
|
|
// SPI buses
|
|
#define MICROPY_HW_SPI1_NAME "X"
|
|
#define MICROPY_HW_SPI1_NSS (pyb_pin_X5)
|
|
#define MICROPY_HW_SPI1_SCK (pyb_pin_X6)
|
|
#define MICROPY_HW_SPI1_MISO (pyb_pin_X7)
|
|
#define MICROPY_HW_SPI1_MOSI (pyb_pin_X8)
|
|
#define MICROPY_HW_SPI2_NAME "Y"
|
|
#define MICROPY_HW_SPI2_NSS (pyb_pin_Y5)
|
|
#define MICROPY_HW_SPI2_SCK (pyb_pin_Y6)
|
|
#define MICROPY_HW_SPI2_MISO (pyb_pin_Y7)
|
|
#define MICROPY_HW_SPI2_MOSI (pyb_pin_Y8)
|
|
#define MICROPY_HW_SPI3_NSS (pyb_pin_W16)
|
|
#define MICROPY_HW_SPI3_SCK (pyb_pin_W29)
|
|
#define MICROPY_HW_SPI3_MISO (pyb_pin_W50)
|
|
#define MICROPY_HW_SPI3_MOSI (pyb_pin_W46)
|
|
|
|
// I2S buses
|
|
#define MICROPY_HW_I2S1 (1)
|
|
#define MICROPY_HW_I2S2 (1)
|
|
|
|
// CAN buses
|
|
#define MICROPY_HW_CAN1_NAME "X"
|
|
#define MICROPY_HW_CAN1_TX (pyb_pin_X10)
|
|
#define MICROPY_HW_CAN1_RX (pyb_pin_X9)
|
|
|
|
// USRSW is not pulled, and pressing the button makes the input go low.
|
|
#define MICROPY_HW_USRSW_PIN (pyb_pin_USR)
|
|
#define MICROPY_HW_USRSW_PULL (GPIO_PULLUP)
|
|
#define MICROPY_HW_USRSW_EXTI_MODE (GPIO_MODE_IT_FALLING)
|
|
#define MICROPY_HW_USRSW_PRESSED (0)
|
|
|
|
// LEDs
|
|
#define MICROPY_HW_LED_INVERTED (1) // LEDs are on when pin is driven low
|
|
#define MICROPY_HW_LED1 (pyb_pin_LED_RED)
|
|
#define MICROPY_HW_LED2 (pyb_pin_LED_GREEN)
|
|
#define MICROPY_HW_LED3 (pyb_pin_LED_BLUE)
|
|
#define MICROPY_HW_LED_ON(pin) (mp_hal_pin_low(pin))
|
|
#define MICROPY_HW_LED_OFF(pin) (mp_hal_pin_high(pin))
|
|
|
|
// SD card
|
|
#define MICROPY_HW_SDCARD_SDMMC (2)
|
|
#define MICROPY_HW_SDCARD_CK (pyb_pin_SD_CK)
|
|
#define MICROPY_HW_SDCARD_CMD (pyb_pin_SD_CMD)
|
|
#define MICROPY_HW_SDCARD_D0 (pyb_pin_SD_D0)
|
|
#define MICROPY_HW_SDCARD_D1 (pyb_pin_SD_D1)
|
|
#define MICROPY_HW_SDCARD_D2 (pyb_pin_SD_D2)
|
|
#define MICROPY_HW_SDCARD_D3 (pyb_pin_SD_D3)
|
|
#define MICROPY_HW_SDCARD_DETECT_PIN (pyb_pin_SD_SW)
|
|
#define MICROPY_HW_SDCARD_DETECT_PULL (GPIO_PULLUP)
|
|
#define MICROPY_HW_SDCARD_DETECT_PRESENT (GPIO_PIN_RESET)
|
|
#define MICROPY_HW_SDCARD_MOUNT_AT_BOOT (0)
|
|
|
|
// MM card: the size is hard-coded to support the WBUS-EMMC add-on
|
|
#define MICROPY_HW_MMCARD_LOG_BLOCK_NBR (7469056 + 2048)
|
|
|
|
// USB config
|
|
#define MICROPY_HW_USB_FS (1)
|
|
#define MICROPY_HW_USB_HS (1)
|
|
#define MICROPY_HW_USB_HS_IN_FS (1)
|
|
#define MICROPY_HW_USB_MAIN_DEV (USB_PHY_HS_ID)
|
|
|
|
// Bluetooth config
|
|
#define MICROPY_HW_BLE_UART_ID (PYB_UART_6)
|
|
#define MICROPY_HW_BLE_UART_BAUDRATE (115200)
|
|
#define MICROPY_HW_BLE_UART_BAUDRATE_SECONDARY (3000000)
|
|
|
|
/******************************************************************************/
|
|
// Bootloader configuration
|
|
|
|
#define MBOOT_USB_AUTODETECT_PORT (1)
|
|
#define MBOOT_FSLOAD (1)
|
|
#define MBOOT_VFS_FAT (1)
|
|
|
|
#define MBOOT_I2C_PERIPH_ID 1
|
|
#define MBOOT_I2C_SCL (pin_B8)
|
|
#define MBOOT_I2C_SDA (pin_B9)
|
|
#define MBOOT_I2C_ALTFUNC (4)
|
|
|
|
#define MBOOT_SPIFLASH_ADDR (0x80000000)
|
|
#define MBOOT_SPIFLASH_BYTE_SIZE (64 * 32 * 1024)
|
|
#define MBOOT_SPIFLASH_LAYOUT "/0x80000000/64*32Kg"
|
|
#define MBOOT_SPIFLASH_ERASE_BLOCKS_PER_PAGE (32 / 4)
|
|
#define MBOOT_SPIFLASH_SPIFLASH (&spi_bdev.spiflash)
|
|
#define MBOOT_SPIFLASH_CONFIG (&spiflash_config)
|
|
|
|
#define MBOOT_SPIFLASH2_ADDR (0x90000000)
|
|
#define MBOOT_SPIFLASH2_BYTE_SIZE (64 * 32 * 1024)
|
|
#define MBOOT_SPIFLASH2_LAYOUT "/0x90000000/64*32Kg"
|
|
#define MBOOT_SPIFLASH2_ERASE_BLOCKS_PER_PAGE (32 / 4)
|
|
#define MBOOT_SPIFLASH2_SPIFLASH (&spi_bdev2.spiflash)
|
|
#define MBOOT_SPIFLASH2_CONFIG (&spiflash2_config)
|
|
|
|
#define MBOOT_BOARD_EARLY_INIT(initial_r0) mboot_board_early_init()
|
|
void mboot_board_early_init(void);
|